A 4x4x4 LED Cube which can be programmed with an arduino nano. A harder soldering challenge combining SMD soldering with very fragile LEDs.
| Item | Qty | Footprint |
|---|---|---|
| Arduino Nano v3 | 1 | ---- |
| Ceramic Capacitor 100 nF | 1 | 0805 |
| Mosfet 2N7002 | 4 | SOT23 |
| Resistor 1 kOhm | 4 | 0805 |
| Resistor 52 Ohm | 16 | 0805 |
| Shiftregister 74HC595 | 2 | SOIC-16 3.9x9.9 mm |
| 5mm LED | 64 | ---- |
TBD
- Idea/PCB-Layout: CC-BY-SA 4.0 - Thomas Schmid and Timo Schindler
- Manual (TeX): LPPL - Marei Peischl
- Manual (pdf): CC-BY-SA 4.0 - Binary Kitchen e.V.