BoardConfig.mk

# config.mk
#
# Product-specific compile-time definitions.
#

TARGET_BOARD_PLATFORM := msm8937
# This value will be shown on fastboot menu
TARGET_BOOTLOADER_BOARD_NAME := QC_Reference_Phone

TARGET_COMPILE_WITH_MSM_KERNEL := true
TARGET_KERNEL_APPEND_DTB := true
BOARD_USES_GENERIC_AUDIO := true

-include $(QCPATH)/common/msm8937_64/BoardConfigVendor.mk

# bring-up overrides
BOARD_USES_GENERIC_AUDIO := true

# Force camera module to be compiled only in 32-bit mode on 64-bit systems
# Once camera module can run in the native mode of the system (either
# 32-bit or 64-bit), the following line should be deleted
BOARD_QTI_CAMERA_32BIT_ONLY := true

# Enables CSVT
TARGET_USES_CSVT := true

NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := generic

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv7-a-neon
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := cortex-a53
USE_CLANG_PLATFORM_BUILD := true
TARGET_CPU_CORTEX_A53 := true

TARGET_NO_BOOTLOADER := false
TARGET_NO_KERNEL := false
BOOTLOADER_GCC_VERSION := arm-eabi-4.8
BOOTLOADER_PLATFORM := msm8952 # use msm8937 LK configuration
#MALLOC_IMPL := dlmalloc
MALLOC_SVELTE := true

TARGET_USERIMAGES_USE_EXT4 := true
BOARD_BOOTIMAGE_PARTITION_SIZE := 0x04000000
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 0x04000000
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
BOARD_USERDATAIMAGE_PARTITION_SIZE := 3112173568
BOARD_CACHEIMAGE_PARTITION_SIZE := 268435456
BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_PERSISTIMAGE_PARTITION_SIZE := 33554432
BOARD_PERSISTIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_OEMIMAGE_PARTITION_SIZE := 268435456
BOARD_FLASH_BLOCK_SIZE := 131072 # (BOARD_KERNEL_PAGESIZE * 64)

# Enable suspend during charger mode
BOARD_CHARGER_ENABLE_SUSPEND := true
BOARD_CHARGER_DISABLE_INIT_BLANK := true

# Added to indicate that protobuf-c is supported in this build
PROTOBUF_SUPPORTED := false

TARGET_USES_ION := true
TARGET_USES_NEW_ION_API :=true
TARGET_USES_QCOM_BSP := true
TARGET_NO_RPC := true

BOARD_KERNEL_CMDLINE := console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 lpm_levels.sleep_disabled=1 androidboot.bootdevice=7824900.sdhci earlycon=msm_hsl_uart,0x78B0000
#BOARD_KERNEL_SEPARATED_DT := true

BOARD_SECCOMP_POLICY := device/qcom/msm8937_32/seccomp

BOARD_KERNEL_BASE        := 0x80000000
BOARD_KERNEL_PAGESIZE    := 2048
BOARD_KERNEL_TAGS_OFFSET := 0x01E00000
BOARD_RAMDISK_OFFSET     := 0x02000000

TARGET_KERNEL_ARCH := arm64
TARGET_KERNEL_HEADER_ARCH := arm64
TARGET_KERNEL_CROSS_COMPILE_PREFIX := aarch64-linux-android-
TARGET_USES_UNCOMPRESSED_KERNEL := false

# Shader cache config options
# Maximum size of the  GLES Shaders that can be cached for reuse.
# Increase the size if shaders of size greater than 12KB are used.
MAX_EGL_CACHE_KEY_SIZE := 12*1024

# Maximum GLES shader cache size for each app to store the compiled shader
# binaries. Decrease the size if RAM or Flash Storage size is a limitation
# of the device.
MAX_EGL_CACHE_SIZE := 2048*1024

BOARD_EGL_CFG := device/qcom/msm8937_64/egl.cfg
TARGET_PLATFORM_DEVICE_BASE := /devices/soc.0/
# Add NON-HLOS files for ota upgrade
ADD_RADIO_FILES := true
TARGET_RECOVERY_UPDATER_LIBS += librecovery_updater_msm
TARGET_INIT_VENDOR_LIB := libinit_msm

#add suffix variable to uniquely identify the board
TARGET_BOARD_SUFFIX := _64

#Enable SSC Feature
TARGET_USES_SSC := true

#Enabling IMS Feature
TARGET_USES_IMS := true

#PCI RCS
TARGET_USES_PCI_RCS := false

# Enable sensor multi HAL
USE_SENSOR_MULTI_HAL := true

#Enable peripheral manager
TARGET_PER_MGR_ENABLED := true

#Enable HW based full disk encryption
TARGET_HW_DISK_ENCRYPTION := true
TARGET_CRYPTFS_HW_PATH := device/qcom/common/cryptfs_hw

TARGET_FORCE_HWC_FOR_VIRTUAL_DISPLAYS := true

# Enable dex pre-opt to speed up initial boot
ifneq ($(TARGET_USES_AOSP),true)
  ifeq ($(HOST_OS),linux)
    ifeq ($(WITH_DEXPREOPT),)
      WITH_DEXPREOPT := true
      WITH_DEXPREOPT_PIC := true
      ifneq ($(TARGET_BUILD_VARIANT),user)
        # Retain classes.dex in APK's for non-user builds
        DEX_PREOPT_DEFAULT := nostripping
      endif
    endif
  endif
endif

FEATURE_QCRIL_UIM_SAP_SERVER_MODE := true

BOARD_HAL_STATIC_LIBRARIES := libhealthd.msm