Skip to content

Latest commit

 

History

History
42 lines (29 loc) · 2.27 KB

Draft_Snap_Extension.md

File metadata and controls

42 lines (29 loc) · 2.27 KB
GuiCommand
Name Workbenches SeeAlso
Draft Snap Extension
Draft_Workbench, Arch_Workbench
Draft_Snap, Draft_Snap_Lock

Draft Snap Extension

Description

The Draft Snap Extension option snaps to an imaginary line that extends beyond the endpoints of straight edges. The edges can belong to Draft or Arch objects but also to objects created with other workbenches.

Up to 2 (or 8 (v0.20) ) edges can be referenced by this snap option and Draft Snap Parallel, making it possible to snap to virtual intersections. Both snap options can also be combined with other snap options.


Snapping the second point of a line to the extension of an edge

Usage

For general information about snapping see Draft Snap.

  1. Make sure snapping is enabled. See Draft Snap Lock.
  2. If Draft Snap Extension is not active do one of the following:
    • Press the button in the Draft snap toolbar.
    • Hold down the button in the Draft snap widget and in the menu that opens select the Snap Extension option.
  3. Choose a Draft or Arch command to create your geometry.
  4. Note that you can also change snap options while a command is active.
  5. Move the cursor over a straight edge.
  6. The edge is highlighted.
  7. If you now move the cursor beyond the endpoints of the edge, you will see a dashed line appear when the cursor is on the extended edge.
  8. The point is marked and the icon is displayed near the cursor.
  9. Click to confirm the point.

Preferences

See Draft Snap.


documentation index > Draft > Draft Snap Extension