Skip to content

Latest commit

 

History

History
647 lines (372 loc) · 42.8 KB

Compile_on_Windows.md

File metadata and controls

647 lines (372 loc) · 42.8 KB
Raw

Compile on Windows/ro

Acest articol explică pas cu pas how to compile FreeCAD on Windows.

Premise

Compiling FreeCAD on Windows requires several tools and libraries.

Programe necesare

  • Git Aici sunt câteva dintre alternative ca GitCola, Tortoise Git, și altele.

  • CMake versiunea 2.x.x sau Cmake 3.x.x

  • Python >2.5 (Acest lucru este necesar numai dacă NU utilizați Libpack. Libpack este livrat încpând cu Python(2.7.x) potrivit pentru compilarea și rularea FreeCAD)

  • A compiler. FreeCAD is tested with Visual Studio (MSVC)---other compilers may work, but instructions for use are not included here. Fore more details, see the section Compiler below.

  • Git (There are also GUI frontends available for Git, see the next section.)

  • CMake version 3.11.x or newer. Hint: Choosing the option Add CMake to the system PATH for all users when installing CMake will make CMake accessible from the Windows command prompt, which can be useful.

  • The LibPack. This is a single package containing all of the libraries necessary to compile FreeCAD on Windows. Download the version of the LibPack that corresponds to the version of FreeCAD you want to compile. To compile FreeCAD 0.20 download the LibPack version 2.6, for FreeCAD 0.19 download the LibPack version 1.0. Extract the LibPack to a convenient location. (If your computer does not recognize the .7z extension, you must install the program 7-zip.) Note: It is highly recommended to compile FreeCAD with the compiler version the LibPack is designed for. For example, you might run into problems compiling FreeCAD 0.20 using MSVC 2017 because the LibPack is designed to be built with MSVC 2019 or newer.To update your LibPack later, see the section Updating the LibPack.

Optional programs

  • A GUI frontend for Git. There are several frontends available, see this list. The main benefit of a frontend is that you don't have to learn the Git commands to get the source code of FreeCAD or to send patches to the GitHub repository of FreeCAD.

In the following we describe source code handling using the TortoiseGit frontend. This frontend integrates directly into Windows file explorer and has a large user community to get help in case you have problems.

  • NSIS is used to generate the FreeCAD Windows installer.

Codul sursă

Utilizați Git (de preferință)

Now you can get the source code of FreeCAD:

Using a frontend

When using the Git frontend TortoiseGit:

  1. Create a new folder where the source code will be downloaded.
  2. Right-click on this folder in the Windows file explorer and select Git Clone in the context menu.
  3. A dialog will appear. In it, enter the URL for the FreeCAD Git repository

https://github.com/FreeCAD/FreeCAD.git

and click OK.

The latest source code will be downloaded from the FreeCAD Git repository and the folder will be tracked by Git.

Using the command line

Pentru a crea o ramură de urmărire locală și pentru a descărca codul sursă, trebuie să deschideți un terminal (promp de comandă) și cd(change directory) în directorul pe care doriți să plasați codul sursă, apoi tastați:

git clone https://github.com/FreeCAD/FreeCAD.git

Compilator

Sub Windows, compilatorul implicit este MS Visual Studio. CI utilizează versiunea din 2013.

The default (recommended) compiler is MS Visual Studio (MSVC). Though it may be possible to use other compilers, for example gcc via Cygwin or MinGW, it is not tested or covered here.

You can get a free version of MSVC (for individual usage) by downloading the Community edition of MS Visual Studio.

Pentru cei care doresc să evite instalarea imensului Visual Studio pentru simplul scop de a avea un compilator, vezi CompileOnWindows - Reducing Disk Footprint.

Note: Although the Community edition of MSVC is free, to use the IDE for more than a 30-day trial period you must create a Microsoft account. If you will only compile using the command line, you don't need the IDE and thus no Microsoft account.

As a free and OpenSource alternative IDE you can use KDevelop. You can use KDevelop to modify and write C++ code but must use the command line to compile.

Configurarea căii de sistem

În interiorul căii dvs. de sistem, asigurați-vă că setați căile corecte la următoarele programe:

  • git (not tortoiseGit, but git.exe) Acest lucru este necesar pentru ca Cmake să actualizeze în mod corespunzător informațiile despre versiunea "Despre FreeCAD".h fișierul care permite FreeCAD să raporteze versiunea corespunzătoare din About FreeCAD din meniul de ajutor.
  • În mod opțional, puteți include Libpack în calea dvs. de sistem. Acest lucru este util dacă intenționați să construiți mai multe configurații / versiuni ale FreeCAD, va trebui să copiați mai puține fișiere după cum este explicat mai târziu în procesul de rulare.

Optionally you can include the paths to some folders to the system PATH variable. This is helpful if you want to access programs in these folders from the command line/powershell or if you want special programs to be found by the compiler or CMake. Besides this, adding folders to the PATH might be necessary if you did not use the corresponding options when installing the program.

  • You can include the folder of your LibPack in your system PATH variable. This is useful if you plan to build multiple configurations/versions of FreeCAD.
  • If you did not use the option to add CMake to the PATH while installing it, add its installation folder

C:\Program Files\CMake\bin to the PATH.

  • If you did not use the option to add TortoiseGit to the PATH while installing it, add its installation folder

C:\Program Files\TortoiseGit\bin to the PATH.

Pentru a adăuga la cale asitemului dvs:

Configurare cu CMake

Once you have all of the necessary tools, libraries, and FreeCAD source code, you are ready to begin the configuration and compilation process. This process will proceed in five steps:

  1. Run CMake once to examine your system and begin the configuration progress (this will report that it failed).
  2. Adjust necessary CMake settings to set the locations of the LibPack and enable Qt5.
  3. Re-run CMake to finalize the configuration (this time it should succeed).
  4. Use CMake to generate the Visual Studio build system.
  5. Use Visual Studio to build FreeCAD.

CMake

First, configure the build environment using CMake:

  1. Open the CMake GUI
  2. Specify the source folder of FreeCAD.
  3. Specify a build folder. This can be build in the folder you cloned the repo because this path is ignored by git. Do not use the source folder. CMake will create this folder if it does not exist.
  4. Click Configure.
  5. In the dialog that appears specify the generator you want to use: in most cases you will use the defaults in this dialog. For the standard MS Visual Studio use Visual Studio xx 2yyy where xx is the compiler version and 2yyy the year of its release. It is recommended to use the default option Use default native compilers.

Note: It is important to specify the correct bit variant. If you have the 64-bit variant of the LibPack you must also use the x64 compiler.

Aceasta va începe configurarea și ar trebui să eșueze deoarece locația FREECAD_LIBPACK_DIR is unset.

  • Expand the FREECAD category and set FREECAD_LIBPACK_DIR to the correct location
  • Check FREECAD_USE_EXTERNAL_PIVY
  • Optionally Check FREECAD_USE_FREETYPE this is required to use the Draft WB's Shape String functionality
  • Click Configure again
  • There should be no errors
  • Click Generate
  • Close CMake
  • Copy libpack\bin folder into the new build folder CMake created

If it fails with the message that Visual Studio could not be found, the CMake support in MSVC is not yet installed. To do this:

  1. Open the MSVC IDE
  2. Use the menu Tools → Get Tools and Features
  3. In the Workloads tab enable Desktop development with C++
  4. On the right side you should now see that the component Visual C++ tools for CMake will be installed.
  5. Install it.

If it fails with a message about the wrong Python version or missing Python, then:

  1. Use the "Search:" box in CMake to search for the string "Python"
  2. If you see there a path like C:/Program Files/Python38/python.exe, CMake recognized the Python that is already installed on your PC, but that version is not compatible with the LibPack. Since the LibPack includes a compatible version of Python, modify the following Python settings in CMake to its paths (assuming the LibPack is in the folder D:/FreeCAD-build/FreeCADLibs_2_8_x64_VC2019):

If there is no error about Visual Studio or Python, everything is fine, but CMake does not yet know all necessary settings. Therefore now:

  1. Search in CMake for the variable FREECAD_LIBPACK_DIR and specify the location of the LibPack folder you downloaded earlier.
  2. (If building FreeCAD 0.19) Search for the variable BUILD_QT5 and enable this option.
  3. (If planning on running directly from the build folder such as for debugging) Search for and enable the following options:
    • FREECAD_COPY_DEPEND_DIRS_TO_BUILD
    • FREECAD_COPY_LIBPACK_BIN_TO_BUILD
    • FREECAD_COPY_PLUGINS_BIN_TO_BUILD
  4. Click Configure again.

There should now be no errors. If you continue to encounter errors that you cannot diagnose, visit the Install/Compile forum on the FreeCAD forum website. If CMake proceeded correctly, click on Generate. After this is done you can close CMake and start the compilation of FreeCAD using Visual Studio. However, for the first compilation keep it open in case you want or need to change some options for the build process.

Opțiuni pentru compilarea Proceselor

Sistemul de compilare CMake ne oferă o mult mai mare flexibilitate în procesul de compilare. Asta înseamnă că putem porni și dezactiva câteva funcționalități sau module. Este într-un fel ca compilarea kernel-ului Linux. Aveți o mulțime de comutatoare pentru a determina procesul de compilare.

Iată descrierea unora dintre aceste switch-uri. Probabil că se vor schimba mult în viitor pentru că vrem să creștem flexibilitatea compilării mult mai mult.

Variable name Description Default

FREECAD_LIBPACK_USE Switch the usage of the FreeCAD LibPack on or off On Win32 on, otherwise off FREECAD_LIBPACK_DIR Directory where the LibPack is FreeCAD SOURCE dir FREECAD_BUILD_GUI Build FreeCAD with all Gui related modules ON FREECAD_BUILD_CAM Build the CAM module, experimental! OFF FREECAD_BUILD_INSTALLER Create the project files for the Windows installer. OFF FREECAD_BUILD_DOXYGEN_DOCU Create the project files for source code documentation. OFF FREECAD_MAINTAINERS_BUILD Switch on stuff needed only when you do a Release build. OFF

: Link table

Compilarea FreeCAD

În funcție de configurația actuală, procesul de construire a FreeCAD va fi ușor diferit. Acest lucru se datorează diferențelor dintre versiunile de software disponibile pentru fiecare sistem de operare.

Depending on your compiler, the process for building FreeCAD will be slightly different. In the following sections known workflows are described. If you are building with Qt Creator, jump to Building with Qt Creator (outdated), otherwise proceed directly:

Building with Visual Studio 15 (2017) or newer

Release Build

  1. Start the Visual Studio IDE. This can either be done by pressing the button Open Project in the CMake GUI or by double-clicking on the file FreeCAD.sln that you find in your build folder.
  2. In the toolbar of the MSVC IDE assure that you use for the first compilation Release.
  3. There is a window called Solution Explorer. It lists all possible compilation targets. To start a full compilation, right-click on the target ALL_BUILD and then choose Build.

This will now take quite a long time.

To compile a ready-to use FreeCAD, compile the target INSTALL, see the section Running and installing FreeCAD.

If you don't get any errors you are done. Congratulations! You can exit MSVC or keep it open.

Important: Since Visual Studio 17.4 you cannot use the code optimization that is on by default for the target SketcherGui. If you do, angle constraints will be misplaced in sketches. To fix this, right-click on this target in the MSVC solution explorer and select the last entry Properties in the context menu. In the appearing dialog go to C/C++ → Optimization and there disable the setting Optimization. Finally build the target ALL_BUILD again.

Debug Build

For a debug build it is necessary that the Python is used that is included in the LibPack. To assure this:

  1. Search in the CMake GUI for "Python"
  2. If you see there a path like C:/Program Files/Python38/python.exe, CMake recognized the Python that is installed on your PC and not the one of the LibPack. In this case adapt these different Python settings in CMake to this (assuming the LibPack is in the folder D:\FreeCAD-build\FreeCADLibs_12.5.2_x64_VC17):

As prerequisite for the debug build, you need to do this:

  1. Copy the content of the LibPack folder bind to the bin folder of the FreeCAD build folder (overwrite the existing files).
  2. Copy the content of the LibPack folder libd to the lib folder of the FreeCAD build folder.

Now you can compile:

  1. Start the Visual Studio IDE. This can either be done by pressing the button Open Project in the CMake GUI or by double-clicking on the file FreeCAD.sln that you find in your build folder.
  2. In the toolbar of the MSVC IDE assure that you use for the first compilation Debug.
  3. There is a window called Solution Explorer. It lists all possible compilation targets. To start a full compilation, right-click on the target ALL_BUILD and then choose Build in the context menu.

This will now take quite a long time.

If there were no compilation errors, and if the FREECAD_COPY_* options mentioned in the CMake Configuration step above were enabled, you can start the debug build:

  1. Right-click on the target FreeCADMain and then choose Set as Startup Project in the context menu.
  2. Finally click in the toolbar on the button with the green triangle named Local Windows Debugger.

This will start the debug build of FreeCAD and you can use the MSVC IDE to debug it.

Video Resource

An English language tutorial that begins with configuration in CMake Gui and continues to the \Build\ command in Visual Studio 16 2019 is available unlisted on YouTube at Tutorial: Build FreeCAD from source on Windows 10.

Compilare cu Qt Creator

Installation and configuration of Qt Creator

  • Download and install Qt Creator

  • Tools -> Options -> Text Editor -> Behavior tab:

    • File Encodings -> Default Encodings:
    • Set to: ISO-8859-1 /...csISOLatin1 (Certain characters create errors/warnings with Qt Creator if left set to UTF-8. This seems to fix it.)

  • Tools -> Options -> Build & Run:

    • CMake tab
      • Fill Executable box with path to cmake.exe
    • Kits tab
      • Name: MSVC 2008
      • Compiler: Microsoft Visual C++ Compiler 9.0 (x86)
      • Debugger: Auto detected...
      • Qt version: None
    • General tab
      • Uncheck: Always build project before deploying it
      • Uncheck: Always deploy project before running it

  • Download and install Qt Creator

  • Tools → Options → Text Editor → Behavior tab:

    • File Encodings → Default Encodings:
    • Set to: ISO-8859-1 /...csISOLatin1 (Certain characters create errors/warnings with Qt Creator if left set to UTF-8. This seems to fix it.)

  • Tools → Options → Build & Run:

    • CMake tab
      • Fill Executable box with path to cmake.exe
    • Kits tab
      • Name: MSVC 2008
      • Compiler: Microsoft Visual C++ Compiler 9.0 (x86)
      • Debugger: Auto detected...
      • Qt version: None
    • General tab
      • Uncheck: Always build project before deploying it
      • Uncheck: Always deploy project before running it

Import project and Build

  • File -> Open File or Project

  • Open CMakeLists.txt which is in the top level of the source

  • This will start CMake

  • Choose build directory and click next

  • Set generator to NMake Generator (MSVC 2008)

  • Click Run CMake. Follow the instructions depicted above to configure CMake to your liking.

  • File → Open File or Project

  • Open CMakeLists.txt which is in the top level of the source

  • This will start CMake

  • Choose build directory and click next

  • Set generator to NMake Generator (MSVC 2008)

  • Click Run CMake. Follow the instructions depicted above to configure CMake to your liking.

Now FreeCAD can be built

  • Build -> Build All
  • This will take a long time...

Once complete, it can be run: There are 2 green triangles at the bottom left. One is debug. The other is run. Pick whichever you want.

Command line build

Here an example how to build FreeCAD from the Command line:

The steps how to compile from the command line depends on the compiler. For MSVC 2017 the steps are:

  1. In Windows start menu go to Visual Studio 2017 → Visual Studio Tools and choose Developer Command Prompt for VS 2017
  2. Change to your build folder.
  3. Execute the command

pythonmsbuild ALL_BUILD.vcxproj /p:Configuration=Release

or

pythonmsbuild INSTALL.vcxproj /p:Configuration=Release

These steps can also be automaized. Here is for example a solution for MSVC 2017:

  1. Download the script compile-FC.txt.
  2. Rename it to compile-FC.bat
  3. In Windows file explorer Shift+Right-click on your build folder and use from the context menu Command prompt here.
  4. Execute the command

pythoncompile-FC install

Instead of calling compile-FC with the option install you can also use debug or release:

debug   - compile FreeCAD in debug configuration

release - compile FreeCAD in release configuration

install    - compile FreeCAD in release configuration and create an install setup

Running and installing FreeCAD

There are 2 methods to run the compiled FreeCAD:

Method 1: You execute the FreeCAD.exe that you find in your build folder in the subfolder bin

Method 2: You build the target INSTALL

Method 2 is the simpler one because it automatically assures that all libraries needed to run the FreeCAD.exe are in the correct folder. The FreeCAD.exe and the libraries will be output in the folder you specified in the CMake variable CMAKE_INSTALL_PREFIX.

For Method 1 you need to enable the FREECAD_COPY_* options mentioned in the CMake Configuration step above.

Troubleshooting

When running FreeCAD you may encounter missing DLLs when using certain workbenches or features of workbenches. The error message in FreeCAD's console will not tell you what DLL is missing. To find this out you must use an external tool:

import os os.system(r"~\DependenciesGui.exe")

Note: Instead of the ~ you must specify the full path to the DependenciesGui.exe on your system.

  • Now drag in the *.pyd file of the workbench with which you get missing DLLs reported.

Updating the build

FreeCAD is very actively developed. Therefore its source code changes almost daily. New features are added and bugs are fixed. To benefit from these source code changes, you must rebuild your FreeCAD. This is done in two steps:

  1. Updating the source code
  2. Recompilation

Updating the source code

Using a frontend

When using the Git frontend TortoiseGit:

  1. Right-click on your FreeCAD source code folder in the Windows file explorer and select Pull in the context menu.
  2. A dialog will appear. Select there what development branch you want to get. master is the main branch. Therefore use this unless you want to compile a special new feature from a branch that has not yet been merged to master. (For more about Git branches, see Git development process.)

Finally click OK.

Using the command line

Open a terminal (command prompt) and switch there to your source directory. Then type:

git pull https://github.com/FreeCAD/FreeCAD.git master

where master the the name of the main development branch. If you want to get code from another branch, use its name instead of master.

Recompilation

  1. Open the MSVC IDE by double-clicking either on the file FreeCAD.sln or on the file ALL_BUILD.vcxproj in your build folder.
  2. Continue with step 2 from the section Building with Visual Studio 15 2017.

Updating the LibPack

If a new major version of a third-party dependency like Open Cascade is released, or if a third-party dependency has important bug fixes, a new LibPack is released. You can find the latest version here.

To update your LibPack the following recipe is best practice:

  1. Delete the bin folder in your build folder.
  2. Switch to your local LibPack folder and delete everything there.
  3. Extract the content of the new LibPack ZIP file into the existing, but now empty, local LibPack folder.
  4. Open CMake and there press the button Configure and then the button Generate. This recreates the bin folder you just deleted and also copies the new LibPack files into it.
  5. In CMake click the button Open Project and the MSVC IDE will open.
  6. In the MSVC IDE build the target INSTALL.

Tools

In order to join the FreeCAD development you should compile and install the following tools:

Qt Designer plugin

FreeCAD uses Qt as toolkit for its user interface. All dialogs are setup in UI-files that can be edited using the program Qt Designer that is part of any Qt installation and also included in the LibPack. FreeCAD has its own set of Qt widgets to provide special features like adding a unit to input fields and to set preferences properties.

Compilation

The plugin cannot be loaded by the Qt Designer if it was compiled using another Qt version than the one your Qt Designer/Qt Creator is based on. Therefore the plugin must be compiled together with FreeCAD:

  • In the CMake options (see this section above) enable the option BUILD_DESIGNER_PLUGIN and reconfigure.
  • open MSVC and build the target FreeCAD_widgets

As result you will get the plugin file 'FreeCAD_widgets.dll in the folder*~\src\Tools\plugins\widget\Release*

Installation

To install the plugin, copy the DLL either to:

  • If you use the LibPack: to the folder*~\FreeCADLibs_2_8_x64_VC2019\plugins\designer*
  • If you have a full Qt installation: you can choose between the folderC:\Qt\5.15.2\msvc2019_64\plugins\designerorC:\Qt\5.15.2\msvc2019_64\bin\designer (you must first create the designer subfolder.)(adapt the paths to your installation!).

Finally (re)start Qt Designer and check its menu Help → Plugins. If the plugin FreeCAD_widgets.dll is listed as being loaded, you can now design and change FreeCAD's .ui files. If not, you must compile the DLL by yourself.

If you prefer using Qt Creator instead of Qt Designer, the plugin file must be placed in this folder:C:\Qt\Qt5.15.2\Tools\QtCreator\bin\plugins\designerThen (re)start Qt Creator, switch to the mode Design and then check the menu Tools → Form Editor → About Qt Designer Plugins. If the plugin FreeCAD_widgets.dll is listed as being loaded, you can now design and change FreeCAD's .ui files. If not, you must compile the DLL by yourself.

Thumbnail Provider

FreeCAD has the feature to provide preview thumbnails for *.FCStd files. That means that in the Windows file explorer *.FCStd files are shown with a screenshot of the model it contains. To provide this feature, FreeCAD needs to have the file FCStdThumbnail.dll installed to Windows.

Installation

The DLL is installed this way:

  1. Download this ZIP file and extract it.
  2. Open a Windows command prompt with administrator privileges (these privileges are a requirement).
  3. Change to the folder where the DLL is.
  4. Execute this command pythonregsvr32 FCStdThumbnail.dll

So check if it works, assure that in FreeCAD the preferences option Save thumbnail into project file when saving document is enabled and save a model. Then view in Windows Explorer the folder of the saved model using a symbol view. You should now see a screenshot of the model in the folder view.

Compilation

To compile the FCStdThumbnail.dll

  1. Change to the FreeCAD source folder*~\src\Tools\thumbs\ThumbnailProvider*
  2. Open the CMake GUI
  3. Specify there as source folder the one you are currently in.
  4. Use the same folder as build folder.
  5. Click Configure
  6. In the appearing dialog, specify the generator according to the one you want to use. For the standard MS Visual Studio use Visual Studio xx 2yyy where xx is the compiler version and 2yyy the year of its release. It is recommended to use the default option Use default native compilers.Note: It is important to specify the correct bit variant. If you have the 64bit variant of LibPack you must also use the x64 compiler.
  7. Click on Generate.
  8. You should now have the file ALL_BUILD.vcxproj in the folder ~\src\Tools\thumbs\ThumbnailProvider. Double-click on it and the MSVC IDE will open.
  9. In the toolbar of the MSVC IDE assure that you use the compilation target Release.
  10. There is a window called Solution Explorer. Right-click there on ALL_BUILD and then choose Build.
  11. As result you should now have a FCStdThumbnail.dll in the folder ~\src\Tools\thumbs\ThumbnailProvider\release that you can install as described above.

Compiling Open Cascade

The LibPack comes with a version of Open Cascade that is suitable for general use. However, under some circumstances you may wish to compile against an alternate version of Open Cascade, such as one of their official releases, or a patched fork.

When compiling Open Cascade for FreeCAD note that there is no guarantee that FreeCAD will work with all versions of Open Cascade. Note also that when you are using the Netgen library, you must use the a NetGen version that it approved to compile with the Open Cascade version you like to compile.

To compile:

  • First obtain the Open Cascade source code, either directly from Open Cascade's git repository or by cloning someone else's fork, such as the "blobfish" fork maintained by FreeCAD forum member tanderson69.

  • Then open the CMake GUI to configure the build system in a similar manner to building FreeCAD. These CMake options have to be set (or explicitly not set):

Variable name Description Default

3RDPARTY_DIR The path to 3rdparty components. It is recommended to use the folder as input where your used LibPack is. Explicitly leave this field empty. empty 3RDPARTY_DOXYGEN_EXECUTABLE The path to the executable of the 3rdparty component Doxygen. It is recommended to install Doxygen. CMake will then find it automatically. empty 3RDPARTY_FREETYPE_DIR The path to the necessary 3rdparty component Freetype. It is recommended to use the folder as input where your used LibPack is. empty 3RDPARTY_RAPIDJSON_DIR Only available if USE_RAPIDJSON is used. The path to the 3rdparty component RapidJSON. It is recommended NOT to use an existing LibPack folder as input. You can use the RapidJSOn folder from a LibPack, but copy it to a new folder and use this new folder as input. empty 3RDPARTY_TCL_DIR The path to the necessary 3rdparty component TCL. It is recommended NOT to use an existing LibPack folder as input. Take for example one of these releases, extract it and take this as input folder for CMake. empty 3RDPARTY_TK_DIR The path to the necessary 3rdparty component TK. It is recommended NOT to use an existing LibPack folder as input. Take for example one of these releases, extract it and take this as input folder for CMake. empty 3RDPARTY_VTK_DIR Only available if USE_VTK is used. The path to the necessary 3rdparty component VTK. It is recommended to use the folder as input where your used LibPack is. If you use another folder please assure that you don't use VTK 9.x or newer. empty BUILD_RELEASE_DISABLE_EXCEPTIONS Disables exception handling for release builds. For FreeCAD you must set it to OFF. ON INSTALL_DIR The output folder when building the target INSTALL. If the build was successful, take the files from this folder to update your LibPack. Windows default program installation folder INSTALL_DIR_BIN The output subfolder for the DLL when building the target INSTALL. You must change it to bin win64/vc14/bin INSTALL_DIR_LIB The output subfolder for the .lib files when building the target INSTALL. You must change it to lib win64/vc14/lib USE_RAPIDJSON To compile Open Cascade with support for RapidJSON. Enabling this is mandatory in order to get support for the file format glTF. OFF USE_VTK To compile Open Cascade with support for VTK. Enabling this is optimal. You can use this to build Open Cascade's VTK bridge. OFF

  • Open the project in Visual Studio and first build the ALL_BUILD and then INSTALL targets in the Release mode.
  • Repeat building the two targets in the Debug mode.

To build FreeCAD using the self-compiled Open Cascade, you must do the following:

  • Copy all folders from the INSTALL_DIR to your LibPack folder (overwrite the existing files)
  • Switch to the LibPack folder and go there to the subfolder cmake
  • Open there the file OpenCASCADEDrawTargets.cmake with a text editor
  • Search there for absolute paths to your LibPack folder and remove them. So e.g. the absolute pathD:/FreeCADLibs_12.5.4_x64_VC17/lib/freetype.libbecomes just freetype.lib
  • Do the same for the file OpenCASCADEVisualizationTargets.cmake

Compiling Netgen

The LibPack comes with a version of Netgen that will was tested to be build with the Open Cascade version of the LibPack. The problem is that every new release of Netgen changes the API. Also every new release of Open Cascade does the same. Therefore one cannot just easily change the Netgen version.

However, you might build Netgen nevertheless. This is an easy task:

  • First obtain the Netgen source code, either directly from Netgen 's git repository.
  • Then open the CMake GUI to configure the build system in a similar manner to building FreeCAD. These CMake options have to be set:

Variable name Description Default

CMAKE_INSTALL_PREFIX The output folder when building the target INSTALL. If the build was successful, take the files from this folder to update your LibPack. C:/netgen OpenCasCade_DIR The path to the CMake files of Open Cascade. If you built Open Cascade as described in the section Compiling Open Cascade you can use the subfolder cmake of there folder you used as INSTALL_DIR. If not, use the subfolder cmake of your LibPack. Note hereby that the LibPack must then already contain a proper Open Cascade build. Independent what folder you use, you must now also create there a subfolder lib and copy in the files freetype.lib and freetyped.lib from your LibPack. empty USE_GUI set it to OFF ON USE_NATIVE_ARCH set it to OFF; this is only necessary important to support older CPU that don't have the AVX2 instruction set ON USE_OCC set it to ON OFF USE_PYTHON set it to OFF ON USE_SUPERBUILD set it to OFF ON ZLIB_INCLUDE_DIR The path to the necessary 3rdparty component zlib. It is recommended to use the folder as input where your used LibPack is. empty ZLIB_LIBRARY_DEBUG The path to the ZLib file zlibd.lib. It is located in the subfolder lib of your LibPack folder. empty ZLIB_LIBRARY_RELEASE The path to the ZLib file zlib.lib. It is located in the subfolder lib of your LibPack folder. empty

  • Additionally you need to add a new CMake entry:

name: CMAKE_DEBUG_POSTFIX, type: string, content: _d This assures that he file names of the debug libraries get another name than the release libraries and can later not be accidentally exchanged.

  • Press the Configure button in CMake to generate the *.cmake files.
  • Only necessary if older CPU should be supported that don't have the AVX2 instruction set:
    • Search your Netgen build folder for the file netgen-targets.cmake and open it with a text editor. Remove the setting ;/arch:AVX2 in the Option INTERFACE_COMPILE_OPTIONS.
    • Press the Configure button in CMake again.
  • Press the Generate button in CMake.
  • Open the project in Visual Studio and first build the ALL_BUILD and then INSTALL targets in the Release mode.
  • Repeat building the two targets in the Debug mode.

To build FreeCAD using the self-compiled Netgen, you must do the following:

  • Copy all folders from the CMAKE_INSTALL_PREFIX to your LibPack folder (overwrite the existing files)

References

A se vedea și

⏵ documentation index > Developer_Documentation > Developer > Compile on Windows/ro