This repo builds support for resinOS on the Allwinner SoCs.
Currently Supported SoC versions:
- H3
Currently Supported Boards:
- add integration with resinHUP in u-boot
- BUG: One of the DT overlays throws the following error:
libfdt fdt_path_offset() returned FDT_ERR_NOTFOUND - support more boards:
- Orange pi plus 2e
- Nanopi m1
- Nanopi neo 2 plus (H5)
There are two ways of initializing this repository:
- Clone this repository with "git clone --recursive".
or
- Run "git clone" and then "git submodule update --init --recursive". This will bring in all the needed dependencies.
- Consult layers/meta-resin/README.md for info on various build flags (setting
up serial console support for example) and build prerequisites. Build flags can
be set by using the build script (barys) or by manually modifying
local.conf.
See below for using the build script.
-
Run the build script:
./resin-yocto-scripts/build/barys -
You can also run barys with the -h switch to inspect the available options
-
Run the build script in dry run mode to setup an empty
builddirectory./resin-yocto-scripts/build/barys --remove-build --dry-run -
Edit the
local.confin thebuild/confdirectory -
Prepare build's shell environment
source layers/poky/oe-init-build-env -
Run bitbake (see message outputted when you sourced above for examples)
For issues we use an aggregated github repository available here. When you create issue make sure you select the right labels.
To contribute send github pull requests targeting this repository.
Please refer to: Yocto Contribution Guidelines and try to use the commit log format as stated there. Example:
test.bb: I added a test
[Issue #01]
I'm going to explain here what my commit does in a way that history
would be useful.
Signed-off-by: Joe Developer <[email protected]>
Make sure you mention the issue addressed by a PR. See: