diff --git a/msg/GpsDump.msg b/msg/GpsDump.msg index 3aa1313a..2477bcfa 100644 --- a/msg/GpsDump.msg +++ b/msg/GpsDump.msg @@ -1,12 +1,10 @@ # This message is used to dump the raw gps communication to the log. -# Set the parameter GPS_DUMP_COMM to 1 to use this. -uint64 timestamp # time since system start (microseconds) +uint64 timestamp # time since system start (microseconds) -uint8 instance # Instance of GNSS receiver - -uint8 len # length of data, MSB bit set = message to the gps device, - # clear = message from the device -uint8[79] data # data to write to the log +uint8 instance # Instance of GNSS receiver +uint8 len # length of data, MSB bit set = message to the gps device, + # clear = message from the device +uint8[79] data # data to write to the log uint8 ORB_QUEUE_LENGTH = 8 diff --git a/msg/SensorGps.msg b/msg/SensorGps.msg index db18899c..ce2bfad4 100644 --- a/msg/SensorGps.msg +++ b/msg/SensorGps.msg @@ -12,7 +12,14 @@ float64 altitude_ellipsoid_m # Altitude above Ellipsoid, meters float32 s_variance_m_s # GPS speed accuracy estimate, (metres/sec) float32 c_variance_rad # GPS course accuracy estimate, (radians) -uint8 fix_type # 0-1: no fix, 2: 2D fix, 3: 3D fix, 4: RTCM code differential, 5: Real-Time Kinematic, float, 6: Real-Time Kinematic, fixed, 8: Extrapolated. Some applications will not use the value of this field unless it is at least two, so always correctly fill in the fix. +uint8 FIX_TYPE_NONE = 1 # Value 0 is also valid to represent no fix. +uint8 FIX_TYPE_2D = 2 +uint8 FIX_TYPE_3D = 3 +uint8 FIX_TYPE_RTCM_CODE_DIFFERENTIAL = 4 +uint8 FIX_TYPE_RTK_FLOAT = 5 +uint8 FIX_TYPE_RTK_FIXED = 6 +uint8 FIX_TYPE_EXTRAPOLATED = 8 +uint8 fix_type # Some applications will not use the value of this field unless it is at least two, so always correctly fill in the fix. float32 eph # GPS horizontal position accuracy (metres) float32 epv # GPS vertical position accuracy (metres)