Instrumentation tests are JUnit 4 tests that run on devices or emulators. They can be either unit tests or integration test.
[TOC]
Enabling tracing during a test run allows all the function calls involved to be
observed in a visual display (using Chrome's built-in chrome://tracing feature).
To run a test with tracing, add the --trace-output
flag to the command used to
call the instrumentation test (either running the test_runner.py script, or a
generated binary such as run_chrome_public_test_apk
). The --trace-output
flag
takes a filename, which, after the test run, will contain a JSON file readable
by chrome://tracing.
By default, the trace includes only certain function calls important to the test
run, both within the Python test runner framework and the Java code running on
the device. For a more detailed look, add the (no-argument) --trace-all
flag.
This causes every function called on the Python side to be added to the trace.
The @Batch("group_name")
annotation is used to run all tests with the same batch group name in the same
instrumentation invocation. In other words, the browser process is not
restarted between these tests, and so any changes to global state, like
launching an Activity, will persist between tests within a batch group. The
benefit of this is that these tests run significantly faster - the per-test cost
of restarting the process can be as high as 10 seconds (usually around 2
seconds), and that doesn't count the cost of starting an Activity like
ChromeTabbedActivity.
Size annotations are used by the test runner to determine the length of time to wait before considering a test hung (i.e., its timeout duration).
Annotations from androidx.test.filters
:
@SmallTest
(timeout: 10 seconds)@MediumTest
(timeout: 30 seconds)@LargeTest
(timeout: 2 minutes)
Annotations from //base
:
@EnormousTest
(timeout: 5 minutes) Typically used for tests that require WiFi.@IntegrationTest
(timeout: 10 minutes) Used for tests that run against real services.@Manual
(timeout: 10 hours) Used for manual tests.
There are several annotations that control whether or not a test runs. Some are conditional, others are not.
@DisabledTest unconditionally disables a test.
@DisabledTest(
// Describes why the test is disabled. Typically includes a crbug link.
message = ""
)
There are two primary annotation categories that conditionally disable tests: @DisableIf and @Restriction. The @DisableIf annotations are intended to temporarily disable a test in certain scenarios where it should work but doesn't. In contrast, the @Restriction annotation is intended to permanently limit a test to specific configurations. It signifies that the test was not, is not, and will not be intended to run beyond those configurations. In both cases, conditional disabling manifests as a skipped test.
@DisableIf.Build
allows for conditional test disabling based on values in
android.os.Build
:
@DisableIf.Build(
// Describes why the test is disabled.
message = "",
// Disables the test on SDK levels that match the given conditions.
// Checks against Build.VERSION.SDK_INT.
sdk_is_greater_than = 0,
sdk_is_less_than = Integer.MAX_VALUE,
// Disables the test on devices that support the given ABI
// (e.g. "arm64-v8a"). Checks against:
// - Build.SUPPORTED_ABIS on L+
// - Build.CPU_ABI and Build.CPU_ABI2 otherwise
supported_abis_includes = "",
// Disables the test on devices with hardware that matches the given
// value. Checks against Build.HARDWARE.
hardware_is = "",
// Disables the test on devices with product names that contain the
// given value. Checks against Build.PRODUCT.
product_name_includes = "",
)
@DisableIf.Device allows for conditional test disabling based on whether a device is a phone, a tablet, or a "large tablet" as determined by org.chromium.ui.base.DeviceFormFactor. This is available to tests in //ui or code that uses //ui.
@DisableIf.Device(
// Disables the test on devices that match the given type(s) as described
// above.
type = {}
)
@Restriction currently allows for conditional test disabling based on device type, device performance, internet connectivity, whether Google Play Services is up to date, and whether the build was an official one.
@Restriction(
// Possible values include:
//
// base:
// - Restriction.RESTRICTION_TYPE_LOW_END_DEVICE
// Restricts the test to low-end devices as determined by SysUtils.isLowEndDevice().
//
// - Restriction.RESTRICTION_TYPE_NON_LOW_END_DEVICE
// Restricts the test to non-low-end devices as determined by SysUtils.isLowEndDevice().
//
// - Restriction.RESTRICTION_TYPE_INTERNET
// Restricts the test to devices that have an internet connection.
//
// chrome:
// - ChromeRestriction.RESTRICTION_TYPE_GOOGLE_PLAY_SERVICES
// Restricts the test to devices with up-to-date versions of Google Play Services.
//
// - ChromeRestriction.RESTRICTION_TYPE_OFFICIAL_BUILD
// Restricts the test to official builds as determined by ChromeVersionInfo.isOfficialBuild().
//
// ui:
// - UiRestriction.RESTRICTION_TYPE_PHONE
// Restricts the test to phones as determined by DeviceFormFactor.
//
// - UiRestriction.RESTRICTION_TYPE_TABLET
// Restricts the test to tablets as determined by DeviceFormFactor.
value = {}
)
@MinAndroidSdkLevel is similar to @Restriction in purpose in that it's intended to permanently limit a test to only recent versions of Android.
@MinAndroidSdkLevel(
// The minimum SDK level at which this test should be executed. Checks
// against Build.VERSION.SDK_INT.
value = 0
)
Several annotations affect how a test is run in interesting or nontrivial ways.
@CommandLineFlags.Add
and
@CommandLineFlags.Remove
manipulate Chrome's
command-line flags on a per-test basis (i.e., the flags handled by
org.chromium.base.CommandLine
and
base::CommandLine
).
@CommandLineFlags.Add(
// The flags to add to the command line for this test. These can be
// anything and typically should include the leading dashes (e.g. "--foo").
value = {}
)
@CommandLineFlags.Remove(
// The flags to remove from the command line for this test. These can only
// be flags added via @CommandLineFlags.Add. Flags already present in the
// command-line file on the device are only present in the native
// CommandLine object and cannot be manipulated.
value = {}
)
@Feature has been used inconsistently in Chromium to group tests across test cases according to the feature they're testing.
@Feature(
// The features associated with this test. These can be anything.
value = {}
)
@Feature doesn't have an inherent function, but it can be used to filter tests
via the test runner's
-A/--annotation
and -E/--exclude-annotation
flags. For example, this would
run only the tests with @Feature annotations containing at least "Sync" in
chrome_public_test_apk
:
out/Debug/bin/run_chrome_public_test_apk -A Feature=Sync