Since an installation from source is a lot of work and error prone we strongly recommend the fast and reliable Omnibus package installation (deb/rpm).
One reason the Omnibus package is more reliable is its use of Runit to restart any of the GitLab processes in case one crashes. On heavily used GitLab instances the memory usage of the Sidekiq background worker will grow over time. Omnibus packages solve this by letting the Sidekiq terminate gracefully if it uses too much memory. After this termination Runit will detect Sidekiq is not running and will start it. Since installations from source don't have Runit, Sidekiq can't be terminated and its memory usage will grow over time.
Make sure you view this installation guide from the tag (version) of GitLab you would like to install. In most cases this should be the highest numbered production tag (without rc in it). You can select the tag in the version dropdown in the top left corner of GitLab (below the menu bar).
If the highest number stable branch is unclear please check the GitLab Blog for installation guide links by version.
This guide is long because it covers many cases and includes all commands you need, this is one of the few installation scripts that actually works out of the box.
This installation guide was created for and tested on Debian/Ubuntu operating systems. Please read doc/install/requirements.md for hardware and operating system requirements. If you want to install on RHEL/CentOS we recommend using the Omnibus packages.
This is the official installation guide to set up a production server. To set up a development installation or for many other installation options please see the installation section of the readme.
The following steps have been known to work. Please use caution when you deviate from this guide. Make sure you don't violate any assumptions GitLab makes about its environment. For example many people run into permission problems because they changed the location of directories or run services as the wrong user.
If you find a bug/error in this guide please submit a merge request following the contributing guide.
The GitLab installation consists of setting up the following components:
- Packages / Dependencies
- Ruby
- System Users
- Database
- Redis
- GitLab
- Nginx
sudo
is not installed on Debian by default. Make sure your system is
up-to-date and install it.
# run as root!
apt-get update -y
apt-get upgrade -y
apt-get install sudo -y
Note: During this installation some files will need to be edited manually. If you are familiar with vim set it as default editor with the commands below. If you are not familiar with vim please skip this and keep using the default editor.
# Install vim and set as default editor
sudo apt-get install -y vim
sudo update-alternatives --set editor /usr/bin/vim.basic
Install the required packages (needed to compile Ruby and native extensions to Ruby gems):
sudo apt-get install -y build-essential zlib1g-dev libyaml-dev libssl-dev libgdbm-dev libreadline-dev libncurses5-dev libffi-dev curl openssh-server redis-server checkinstall libxml2-dev libxslt-dev libcurl4-openssl-dev libicu-dev logrotate python-docutils pkg-config cmake nodejs
If you want to use Kerberos for user authentication, then install libkrb5-dev:
sudo apt-get install libkrb5-dev
Note: If you don't know what Kerberos is, you can assume you don't need it.
Make sure you have the right version of Git installed
# Install Git
sudo apt-get install -y git-core
# Make sure Git is version 1.7.10 or higher, for example 1.7.12 or 2.0.0
git --version
Is the system packaged Git too old? Remove it and compile from source.
# Remove packaged Git
sudo apt-get remove git-core
# Install dependencies
sudo apt-get install -y libcurl4-openssl-dev libexpat1-dev gettext libz-dev libssl-dev build-essential
# Download and compile from source
cd /tmp
curl -L --progress https://www.kernel.org/pub/software/scm/git/git-2.4.3.tar.gz | tar xz
cd git-2.4.3/
./configure
make prefix=/usr/local all
# Install into /usr/local/bin
sudo make prefix=/usr/local install
# When editing config/gitlab.yml (Step 5), change the git -> bin_path to /usr/local/bin/git
Note: In order to receive mail notifications, make sure to install a mail server. By default, Debian is shipped with exim4 but this has problems while Ubuntu does not ship with one. The recommended mail server is postfix and you can install it with:
sudo apt-get install -y postfix
Then select 'Internet Site' and press enter to confirm the hostname.
The use of Ruby version managers such as RVM, rbenv or chruby with GitLab in production frequently leads to hard to diagnose problems. For example, GitLab Shell is called from OpenSSH and having a version manager can prevent pushing and pulling over SSH. Version managers are not supported and we strongly advise everyone to follow the instructions below to use a system Ruby.
Remove the old Ruby 1.8 if present
sudo apt-get remove ruby1.8
Download Ruby and compile it:
mkdir /tmp/ruby && cd /tmp/ruby
curl -L --progress http://cache.ruby-lang.org/pub/ruby/2.1/ruby-2.1.6.tar.gz | tar xz
cd ruby-2.1.6
./configure --disable-install-rdoc
make
sudo make install
Install the Bundler Gem:
sudo gem install bundler --no-ri --no-rdoc
Since GitLab 8.0, Git HTTP requests are handled by gitlab-git-http-server. This is a small daemon written in Go. To install gitlab-git-http-server we need a Go compiler.
curl -O --progress https://storage.googleapis.com/golang/go1.5.linux-amd64.tar.gz
echo '5817fa4b2252afdb02e11e8b9dc1d9173ef3bd5a go1.5.linux-amd64.tar.gz' | shasum -c - && \
sudo tar -C /usr/local -xzf go1.5.linux-amd64.tar.gz
sudo ln -sf /usr/local/go/bin/{go,godoc,gofmt} /usr/local/bin/
rm go1.5.linux-amd64.tar.gz
Create a git
user for GitLab:
sudo adduser --disabled-login --gecos 'GitLab' git
We recommend using a PostgreSQL database. For MySQL check MySQL setup guide. Note: because we need to make use of extensions you need at least pgsql 9.1.
# Install the database packages
sudo apt-get install -y postgresql postgresql-client libpq-dev
# Login to PostgreSQL
sudo -u postgres psql -d template1
# Create a user for GitLab
# Do not type the 'template1=#', this is part of the prompt
template1=# CREATE USER git CREATEDB;
# Create the GitLab production database & grant all privileges on database
template1=# CREATE DATABASE gitlabhq_production OWNER git;
# Quit the database session
template1=# \q
# Try connecting to the new database with the new user
sudo -u git -H psql -d gitlabhq_production
# Quit the database session
gitlabhq_production> \q
sudo apt-get install redis-server
# Configure redis to use sockets
sudo cp /etc/redis/redis.conf /etc/redis/redis.conf.orig
# Disable Redis listening on TCP by setting 'port' to 0
sed 's/^port .*/port 0/' /etc/redis/redis.conf.orig | sudo tee /etc/redis/redis.conf
# Enable Redis socket for default Debian / Ubuntu path
echo 'unixsocket /var/run/redis/redis.sock' | sudo tee -a /etc/redis/redis.conf
# Grant permission to the socket to all members of the redis group
echo 'unixsocketperm 770' | sudo tee -a /etc/redis/redis.conf
# Create the directory which contains the socket
mkdir /var/run/redis
chown redis:redis /var/run/redis
chmod 755 /var/run/redis
# Persist the directory which contains the socket, if applicable
if [ -d /etc/tmpfiles.d ]; then
echo 'd /var/run/redis 0755 redis redis 10d -' | sudo tee -a /etc/tmpfiles.d/redis.conf
fi
# Activate the changes to redis.conf
sudo service redis-server restart
# Add git to the redis group
sudo usermod -aG redis git
# We'll install GitLab into home directory of the user "git"
cd /home/git
# Clone GitLab repository
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-ce.git -b 7-14-stable gitlab
Note: You can change 7-14-stable
to master
if you want the bleeding edge version, but never install master on a production server!
# Go to GitLab installation folder
cd /home/git/gitlab
# Copy the example GitLab config
sudo -u git -H cp config/gitlab.yml.example config/gitlab.yml
# Update GitLab config file, follow the directions at top of file
sudo -u git -H editor config/gitlab.yml
# Make sure GitLab can write to the log/ and tmp/ directories
sudo chown -R git log/
sudo chown -R git tmp/
sudo chmod -R u+rwX,go-w log/
sudo chmod -R u+rwX tmp/
# Make sure GitLab can write to the tmp/pids/ and tmp/sockets/ directories
sudo chmod -R u+rwX tmp/pids/
sudo chmod -R u+rwX tmp/sockets/
# Make sure GitLab can write to the public/uploads/ directory
sudo chmod -R u+rwX public/uploads
# Copy the example Unicorn config
sudo -u git -H cp config/unicorn.rb.example config/unicorn.rb
# Find number of cores
nproc
# Enable cluster mode if you expect to have a high load instance
# Ex. change amount of workers to 3 for 2GB RAM server
# Set the number of workers to at least the number of cores
sudo -u git -H editor config/unicorn.rb
# Copy the example Rack attack config
sudo -u git -H cp config/initializers/rack_attack.rb.example config/initializers/rack_attack.rb
# Configure Git global settings for git user, used when editing via web editor
sudo -u git -H git config --global core.autocrlf input
# Configure Redis connection settings
sudo -u git -H cp config/resque.yml.example config/resque.yml
# Change the Redis socket path if you are not using the default Debian / Ubuntu configuration
sudo -u git -H editor config/resque.yml
Important Note: Make sure to edit both gitlab.yml
and unicorn.rb
to match your setup.
Note: If you want to use HTTPS, see Using HTTPS for the additional steps.
# PostgreSQL only:
sudo -u git cp config/database.yml.postgresql config/database.yml
# MySQL only:
sudo -u git cp config/database.yml.mysql config/database.yml
# MySQL and remote PostgreSQL only:
# Update username/password in config/database.yml.
# You only need to adapt the production settings (first part).
# If you followed the database guide then please do as follows:
# Change 'secure password' with the value you have given to $password
# You can keep the double quotes around the password
sudo -u git -H editor config/database.yml
# PostgreSQL and MySQL:
# Make config/database.yml readable to git only
sudo -u git -H chmod o-rwx config/database.yml
Note: As of bundler 1.5.2, you can invoke bundle install -jN
(where N
the number of your processor cores) and enjoy the parallel gems installation with measurable difference in completion time (~60% faster). Check the number of your cores with nproc
. For more information check this post. First make sure you have bundler >= 1.5.2 (run bundle -v
) as it addresses some issues that were fixed in 1.5.2.
# For PostgreSQL (note, the option says "without ... mysql")
sudo -u git -H bundle install --deployment --without development test mysql aws kerberos
# Or if you use MySQL (note, the option says "without ... postgres")
sudo -u git -H bundle install --deployment --without development test postgres aws kerberos
Note: If you want to use Kerberos for user authentication, then omit kerberos
in the --without
option above.
GitLab Shell is an SSH access and repository management software developed specially for GitLab.
# Run the installation task for gitlab-shell (replace `REDIS_URL` if needed):
sudo -u git -H bundle exec rake gitlab:shell:install[v2.6.5] REDIS_URL=unix:/var/run/redis/redis.sock RAILS_ENV=production
# By default, the gitlab-shell config is generated from your main GitLab config.
# You can review (and modify) the gitlab-shell config as follows:
sudo -u git -H editor /home/git/gitlab-shell/config.yml
Note: If you want to use HTTPS, see Using HTTPS for the additional steps.
Note: Make sure your hostname can be resolved on the machine itself by either a proper DNS record or an additional line in /etc/hosts ("127.0.0.1 hostname"). This might be necessary for example if you set up gitlab behind a reverse proxy. If the hostname cannot be resolved, the final installation check will fail with "Check GitLab API access: FAILED. code: 401" and pushing commits will be rejected with "[remote rejected] master -> master (hook declined)".
cd /home/git
sudo -u git -H git clone https://gitlab.com/gitlab-org/gitlab-git-http-server.git
cd gitlab-git-http-server
sudo -u git -H make
sudo -u git -H bundle exec rake gitlab:setup RAILS_ENV=production
# Type 'yes' to create the database tables.
# When done you see 'Administrator account created:'
Note: You can set the Administrator/root password by supplying it in environmental variable GITLAB_ROOT_PASSWORD
as seen below. If you don't set the password (and it is set to the default one) please wait with exposing GitLab to the public internet until the installation is done and you've logged into the server the first time. During the first login you'll be forced to change the default password.
sudo -u git -H bundle exec rake gitlab:setup RAILS_ENV=production GITLAB_ROOT_PASSWORD=yourpassword
Download the init script (will be /etc/init.d/gitlab
):
sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
And if you are installing with a non-default folder or user copy and edit the defaults file:
sudo cp lib/support/init.d/gitlab.default.example /etc/default/gitlab
If you installed GitLab in another directory or as a user other than the default you should change these settings in /etc/default/gitlab
. Do not edit /etc/init.d/gitlab
as it will be changed on upgrade.
Make GitLab start on boot:
sudo update-rc.d gitlab defaults 21
sudo cp lib/support/logrotate/gitlab /etc/logrotate.d/gitlab
Check if GitLab and its environment are configured correctly:
sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
sudo -u git -H bundle exec rake assets:precompile RAILS_ENV=production
sudo service gitlab start
# or
sudo /etc/init.d/gitlab restart
Note: Nginx is the officially supported web server for GitLab. If you cannot or do not want to use Nginx as your web server, have a look at the GitLab recipes.
sudo apt-get install -y nginx
Copy the example site config:
sudo cp lib/support/nginx/gitlab /etc/nginx/sites-available/gitlab
sudo ln -s /etc/nginx/sites-available/gitlab /etc/nginx/sites-enabled/gitlab
Make sure to edit the config file to match your setup:
# Change YOUR_SERVER_FQDN to the fully-qualified
# domain name of your host serving GitLab.
# If using Ubuntu default nginx install:
# either remove the default_server from the listen line
# or else sudo rm -f /etc/nginx/sites-enabled/default
sudo editor /etc/nginx/sites-available/gitlab
Note: If you want to use HTTPS, replace the gitlab
Nginx config with gitlab-ssl
. See Using HTTPS for HTTPS configuration details.
Validate your gitlab
or gitlab-ssl
Nginx config file with the following command:
sudo nginx -t
You should receive syntax is okay
and test is successful
messages. If you receive errors check your gitlab
or gitlab-ssl
Nginx config file for typos, etc. as indicated in the error message given.
sudo service nginx restart
To make sure you didn't miss anything run a more thorough check with:
sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
If all items are green, then congratulations on successfully installing GitLab!
NOTE: Supply SANITIZE=true
environment variable to gitlab:check
to omit project names from the output of the check command.
Visit YOUR_SERVER in your web browser for your first GitLab login. The setup has created a default admin account for you. You can use it to log in:
root
5iveL!fe
Important Note: On login you'll be prompted to change the password.
Enjoy!
You can use sudo service gitlab start
and sudo service gitlab stop
to start and stop GitLab.
To use GitLab with HTTPS:
- In
gitlab.yml
:- Set the
port
option in section 1 to443
. - Set the
https
option in section 1 totrue
.
- Set the
- In the
config.yml
of gitlab-shell:- Set
gitlab_url
option to the HTTPS endpoint of GitLab (e.g.https://git.example.com
). - Set the certificates using either the
ca_file
orca_path
option.
- Set
- Use the
gitlab-ssl
Nginx example config instead of thegitlab
config.- Update
YOUR_SERVER_FQDN
. - Update
ssl_certificate
andssl_certificate_key
. - Review the configuration file and consider applying other security and performance enhancing features.
- Update
Using a self-signed certificate is discouraged but if you must use it follow the normal directions then:
-
Generate a self-signed SSL certificate:
mkdir -p /etc/nginx/ssl/ cd /etc/nginx/ssl/ sudo openssl req -newkey rsa:2048 -x509 -nodes -days 3560 -out gitlab.crt -keyout gitlab.key sudo chmod o-r gitlab.key
-
In the
config.yml
of gitlab-shell setself_signed_cert
totrue
.
Apart from the always supported markdown style there are other rich text files that GitLab can display. But you might have to install a dependency to do so. Please see the github-markup gem readme for more information.
If you'd like Resque to connect to a Redis server on a non-standard port or on a different host, you can configure its connection string via the config/resque.yml
file.
# example
production: redis://redis.example.tld:6379
If you want to connect the Redis server via socket, then use the "unix:" URL scheme and the path to the Redis socket file in the config/resque.yml
file.
# example
production: unix:/path/to/redis/socket
If you are running SSH on a non-standard port, you must change the GitLab user's SSH config.
# Add to /home/git/.ssh/config
host localhost # Give your setup a name (here: override localhost)
user git # Your remote git user
port 2222 # Your port number
hostname 127.0.0.1; # Your server name or IP
You also need to change the corresponding options (e.g. ssh_user
, ssh_host
, admin_uri
) in the config\gitlab.yml
file.
You can configure LDAP authentication in config/gitlab.yml
. Please restart GitLab after editing this file.
See the omniauth integration document