From 541806d364e723f184bcd8e6cb683ff6c229bd2c Mon Sep 17 00:00:00 2001 From: Zain Date: Thu, 26 Oct 2023 20:36:41 +0530 Subject: [PATCH 01/11] Added new mcpwm interface Updated MCPWM Interface, but stuck at an exception ( Guru Meditation Error: Core 0 panic'ed (InstrFetchError). Updated small pointer error. Fixed double pointer assignment error. Cleaned Interface, fixed issue with mapping of duty cycle values Fixed silly error in pindefs for motors motor driver parallel example deleted Small change in include files --- .vscode/launch.json | 10 + .vscode/settings.json | 17 + .vscode/tasks.json | 258 +++ CMakeLists.txt | 4 +- examples/bar_graph/sdkconfig | 1858 ++++++++++++++++++++++ examples/motor_driver_normal/main/main.c | 32 +- examples/motor_driver_normal/sdkconfig | 1858 ++++++++++++++++++++++ include/bar_graph.h | 2 +- include/mcpwm_interface.h | 109 ++ include/motor_driver.h | 94 +- include/sra_board.h | 4 +- include/utils.h | 2 + src/bar_graph.c | 90 +- src/mcpwm_interface.c | 181 +++ src/motor_driver.c | 212 +-- 15 files changed, 4419 insertions(+), 312 deletions(-) create mode 100644 .vscode/launch.json create mode 100644 .vscode/settings.json create mode 100644 .vscode/tasks.json create mode 100644 examples/bar_graph/sdkconfig create mode 100644 examples/motor_driver_normal/sdkconfig create mode 100644 include/mcpwm_interface.h create mode 100644 src/mcpwm_interface.c diff --git a/.vscode/launch.json b/.vscode/launch.json new file mode 100644 index 0000000..6d2236f --- /dev/null +++ b/.vscode/launch.json @@ -0,0 +1,10 @@ +{ + "version": "0.2.0", + "configurations": [ + { + "type": "espidf", + "name": "Launch", + "request": "launch" + } + ] +} \ No newline at end of file diff --git a/.vscode/settings.json b/.vscode/settings.json new file mode 100644 index 0000000..f19fa1c --- /dev/null +++ b/.vscode/settings.json @@ -0,0 +1,17 @@ +{ + "idf.espIdfPath": "/Users/zainsiddavatam/esp/esp-idf", + "files.associations": { + "*.embeddedhtml": "html", + "mcpwm.h": "c", + "cdefs.h": "c", + "mcpwm_prelude.h": "c", + "freertos.h": "c", + "esp_check.h": "c" + }, + "idf.adapterTargetName": "esp32", + "idf.openOcdConfigs": [ + "board/esp32-wrover-kit-3.3v.cfg" + ], + "idf.port": "/dev/cu.usbserial-10", + "idf.flashType": "UART" +} \ No newline at end of file diff --git a/.vscode/tasks.json b/.vscode/tasks.json new file mode 100644 index 0000000..d72c4f6 --- /dev/null +++ b/.vscode/tasks.json @@ -0,0 +1,258 @@ +{ + "version": "2.0.0", + "tasks": [ + { + "label": "Build - Build project", + "type": "shell", + "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py build", + "windows": { + "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py build", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": [ + { + "owner": "cpp", + "fileLocation": [ + "autoDetect", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + ], + "group": { + "kind": "build", + "isDefault": true + } + }, + { + "label": "Set ESP-IDF Target", + "type": "shell", + "command": "${command:espIdf.setTarget}", + "problemMatcher": { + "owner": "cpp", + "fileLocation": [ + "autoDetect", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + }, + { + "label": "Clean - Clean the project", + "type": "shell", + "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py fullclean", + "windows": { + "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py fullclean", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": [ + { + "owner": "cpp", + "fileLocation": [ + "autoDetect", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + ] + }, + { + "label": "Flash - Flash the device", + "type": "shell", + "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py -p ${config:idf.port} -b ${config:idf.flashBaudRate} flash", + "windows": { + "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py flash -p ${config:idf.portWin} -b ${config:idf.flashBaudRate}", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": [ + { + "owner": "cpp", + "fileLocation": [ + "autoDetect", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + ] + }, + { + "label": "Monitor: Start the monitor", + "type": "shell", + "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py -p ${config:idf.port} monitor", + "windows": { + "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py -p ${config:idf.portWin} monitor", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": [ + { + "owner": "cpp", + "fileLocation": [ + "autoDetect", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + ], + "dependsOn": "Flash - Flash the device" + }, + { + "label": "OpenOCD: Start openOCD", + "type": "shell", + "presentation": { + "echo": true, + "reveal": "never", + "focus": false, + "panel": "new" + }, + "command": "openocd -s ${command:espIdf.getOpenOcdScriptValue} ${command:espIdf.getOpenOcdConfigs}", + "windows": { + "command": "openocd.exe -s ${command:espIdf.getOpenOcdScriptValue} ${command:espIdf.getOpenOcdConfigs}", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}" + } + } + }, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}" + } + }, + "problemMatcher": { + "owner": "cpp", + "fileLocation": [ + "autoDetect", + "${workspaceFolder}" + ], + "pattern": { + "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", + "file": 1, + "line": 2, + "column": 3, + "severity": 4, + "message": 5 + } + } + }, + { + "label": "adapter", + "type": "shell", + "command": "${config:idf.pythonBinPath}", + "isBackground": true, + "options": { + "env": { + "PATH": "${env:PATH}:${config:idf.customExtraPaths}", + "PYTHONPATH": "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter" + } + }, + "problemMatcher": { + "background": { + "beginsPattern": "\bDEBUG_ADAPTER_STARTED\b", + "endsPattern": "DEBUG_ADAPTER_READY2CONNECT", + "activeOnStart": true + }, + "pattern": { + "regexp": "(\\d+)-(\\d+)-(\\d+)\\s(\\d+):(\\d+):(\\d+),(\\d+)\\s-(.+)\\s(ERROR)", + "file": 8, + "line": 2, + "column": 3, + "severity": 4, + "message": 9 + } + }, + "args": [ + "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter_main.py", + "-e", + "${workspaceFolder}/build/${command:espIdf.getProjectName}.elf", + "-s", + "${command:espIdf.getOpenOcdScriptValue}", + "-ip", + "localhost", + "-dn", + "${config:idf.adapterTargetName}", + "-om", + "connect_to_instance" + ], + "windows": { + "command": "${config:idf.pythonBinPathWin}", + "options": { + "env": { + "PATH": "${env:PATH};${config:idf.customExtraPaths}", + "PYTHONPATH": "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter" + } + } + } + } + ] +} \ No newline at end of file diff --git a/CMakeLists.txt b/CMakeLists.txt index 3009c27..198ea4e 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -1,4 +1,6 @@ -set(srcs "src/i2cdev.c" "src/adc.c" "src/bar_graph.c" "src/switches.c" "src/lsa.c" "src/motor_driver.c" "src/mpu6050.c" "src/servo.c" "src/utils.c") +cmake_minimum_required(VERSION 3.22) + +set(srcs "src/i2cdev.c" "src/adc.c" "src/bar_graph.c" "src/switches.c" "src/lsa.c" "src/mcpwm_interface.c" "src/mpu6050.c" "src/servo.c" "src/utils.c" "src/motor_driver.c") set(include_dirs include) if(CONFIG_ENABLE_OLED) diff --git a/examples/bar_graph/sdkconfig b/examples/bar_graph/sdkconfig new file mode 100644 index 0000000..ff31a74 --- /dev/null +++ b/examples/bar_graph/sdkconfig @@ -0,0 +1,1858 @@ +# +# Automatically generated file. DO NOT EDIT. +# Espressif IoT Development Framework (ESP-IDF) 5.1.1 Project Configuration +# +CONFIG_SOC_BROWNOUT_RESET_SUPPORTED="Not determined" +CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED="Not determined" +CONFIG_SOC_DPORT_WORKAROUND="Not determined" +CONFIG_SOC_CAPS_ECO_VER_MAX=301 +CONFIG_SOC_ADC_SUPPORTED=y +CONFIG_SOC_DAC_SUPPORTED=y +CONFIG_SOC_UART_SUPPORTED=y +CONFIG_SOC_MCPWM_SUPPORTED=y +CONFIG_SOC_GPTIMER_SUPPORTED=y +CONFIG_SOC_SDMMC_HOST_SUPPORTED=y +CONFIG_SOC_BT_SUPPORTED=y +CONFIG_SOC_PCNT_SUPPORTED=y +CONFIG_SOC_WIFI_SUPPORTED=y +CONFIG_SOC_SDIO_SLAVE_SUPPORTED=y +CONFIG_SOC_TWAI_SUPPORTED=y +CONFIG_SOC_EMAC_SUPPORTED=y +CONFIG_SOC_ULP_SUPPORTED=y +CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y +CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y +CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y +CONFIG_SOC_RTC_MEM_SUPPORTED=y +CONFIG_SOC_I2S_SUPPORTED=y +CONFIG_SOC_RMT_SUPPORTED=y +CONFIG_SOC_SDM_SUPPORTED=y +CONFIG_SOC_GPSPI_SUPPORTED=y +CONFIG_SOC_LEDC_SUPPORTED=y +CONFIG_SOC_I2C_SUPPORTED=y +CONFIG_SOC_SUPPORT_COEXISTENCE=y +CONFIG_SOC_AES_SUPPORTED=y +CONFIG_SOC_MPI_SUPPORTED=y +CONFIG_SOC_SHA_SUPPORTED=y +CONFIG_SOC_FLASH_ENC_SUPPORTED=y +CONFIG_SOC_SECURE_BOOT_SUPPORTED=y +CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y +CONFIG_SOC_BOD_SUPPORTED=y +CONFIG_SOC_ULP_FSM_SUPPORTED=y +CONFIG_SOC_DPORT_WORKAROUND_DIS_INTERRUPT_LVL=5 +CONFIG_SOC_XTAL_SUPPORT_26M=y +CONFIG_SOC_XTAL_SUPPORT_40M=y +CONFIG_SOC_XTAL_SUPPORT_AUTO_DETECT=y +CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y +CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y +CONFIG_SOC_ADC_DMA_SUPPORTED=y +CONFIG_SOC_ADC_PERIPH_NUM=2 +CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10 +CONFIG_SOC_ADC_ATTEN_NUM=4 +CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2 +CONFIG_SOC_ADC_PATT_LEN_MAX=16 +CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=9 +CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12 +CONFIG_SOC_ADC_DIGI_RESULT_BYTES=2 +CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4 +CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=2 +CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=20 +CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=9 +CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12 +CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y +CONFIG_SOC_IDCACHE_PER_CORE=y +CONFIG_SOC_CPU_CORES_NUM=2 +CONFIG_SOC_CPU_INTR_NUM=32 +CONFIG_SOC_CPU_HAS_FPU=y +CONFIG_SOC_CPU_BREAKPOINTS_NUM=2 +CONFIG_SOC_CPU_WATCHPOINTS_NUM=2 +CONFIG_SOC_CPU_WATCHPOINT_SIZE=64 +CONFIG_SOC_DAC_CHAN_NUM=2 +CONFIG_SOC_DAC_RESOLUTION=8 +CONFIG_SOC_DAC_DMA_16BIT_ALIGN=y +CONFIG_SOC_GPIO_PORT=1 +CONFIG_SOC_GPIO_PIN_COUNT=40 +CONFIG_SOC_GPIO_VALID_GPIO_MASK=0xFFFFFFFFFF +CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0xEF0FEA +CONFIG_SOC_I2C_NUM=2 +CONFIG_SOC_I2C_FIFO_LEN=32 +CONFIG_SOC_I2C_CMD_REG_NUM=16 +CONFIG_SOC_I2C_SUPPORT_SLAVE=y +CONFIG_SOC_I2C_SUPPORT_APB=y +CONFIG_SOC_I2S_NUM=2 +CONFIG_SOC_I2S_HW_VERSION_1=y +CONFIG_SOC_I2S_SUPPORTS_APLL=y +CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y +CONFIG_SOC_I2S_SUPPORTS_PDM=y +CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y +CONFIG_SOC_I2S_PDM_MAX_TX_LINES=1 +CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y +CONFIG_SOC_I2S_PDM_MAX_RX_LINES=1 +CONFIG_SOC_I2S_SUPPORTS_ADC_DAC=y +CONFIG_SOC_I2S_SUPPORTS_ADC=y +CONFIG_SOC_I2S_SUPPORTS_DAC=y +CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA=y +CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD=y +CONFIG_SOC_I2S_LCD_I80_VARIANT=y +CONFIG_SOC_LCD_I80_SUPPORTED=y +CONFIG_SOC_LCD_I80_BUSES=2 +CONFIG_SOC_LCD_I80_BUS_WIDTH=24 +CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX=y +CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y +CONFIG_SOC_LEDC_SUPPORT_REF_TICK=y +CONFIG_SOC_LEDC_SUPPORT_HS_MODE=y +CONFIG_SOC_LEDC_CHANNEL_NUM=8 +CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=20 +CONFIG_SOC_MCPWM_GROUPS=2 +CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3 +CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3 +CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3 +CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y +CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3 +CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3 +CONFIG_SOC_MMU_PERIPH_NUM=2 +CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=3 +CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000 +CONFIG_SOC_MPU_REGIONS_MAX_NUM=8 +CONFIG_SOC_PCNT_GROUPS=1 +CONFIG_SOC_PCNT_UNITS_PER_GROUP=8 +CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2 +CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2 +CONFIG_SOC_RMT_GROUPS=1 +CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=8 +CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=8 +CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8 +CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=64 +CONFIG_SOC_RMT_SUPPORT_REF_TICK=y +CONFIG_SOC_RMT_SUPPORT_APB=y +CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT=y +CONFIG_SOC_RTCIO_PIN_COUNT=18 +CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y +CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y +CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y +CONFIG_SOC_SDM_GROUPS=1 +CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8 +CONFIG_SOC_SDM_CLK_SUPPORT_APB=y +CONFIG_SOC_SPI_HD_BOTH_INOUT_SUPPORTED=y +CONFIG_SOC_SPI_AS_CS_SUPPORTED=y +CONFIG_SOC_SPI_PERIPH_NUM=3 +CONFIG_SOC_SPI_DMA_CHAN_NUM=2 +CONFIG_SOC_SPI_MAX_CS_NUM=3 +CONFIG_SOC_SPI_SUPPORT_CLK_APB=y +CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64 +CONFIG_SOC_SPI_MAX_PRE_DIVIDER=8192 +CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y +CONFIG_SOC_TIMER_GROUPS=2 +CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2 +CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=64 +CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4 +CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y +CONFIG_SOC_TOUCH_VERSION_1=y +CONFIG_SOC_TOUCH_SENSOR_NUM=10 +CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX=0xFF +CONFIG_SOC_TWAI_CONTROLLER_NUM=1 +CONFIG_SOC_TWAI_BRP_MIN=2 +CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y +CONFIG_SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT=y +CONFIG_SOC_UART_NUM=3 +CONFIG_SOC_UART_SUPPORT_APB_CLK=y +CONFIG_SOC_UART_SUPPORT_REF_TICK=y +CONFIG_SOC_UART_FIFO_LEN=128 +CONFIG_SOC_UART_BITRATE_MAX=5000000 +CONFIG_SOC_SPIRAM_SUPPORTED=y +CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y +CONFIG_SOC_SHA_SUPPORT_PARALLEL_ENG=y +CONFIG_SOC_SHA_SUPPORT_SHA1=y +CONFIG_SOC_SHA_SUPPORT_SHA256=y +CONFIG_SOC_SHA_SUPPORT_SHA384=y +CONFIG_SOC_SHA_SUPPORT_SHA512=y +CONFIG_SOC_RSA_MAX_BIT_LEN=4096 +CONFIG_SOC_AES_SUPPORT_AES_128=y +CONFIG_SOC_AES_SUPPORT_AES_192=y +CONFIG_SOC_AES_SUPPORT_AES_256=y +CONFIG_SOC_SECURE_BOOT_V1=y +CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=y +CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32 +CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21 +CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y +CONFIG_SOC_PM_SUPPORT_RTC_FAST_MEM_PD=y +CONFIG_SOC_PM_SUPPORT_RTC_SLOW_MEM_PD=y +CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y +CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y +CONFIG_SOC_PM_SUPPORT_MODEM_PD=y +CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y +CONFIG_SOC_CLK_APLL_SUPPORTED=y +CONFIG_SOC_APLL_MULTIPLIER_OUT_MIN_HZ=350000000 +CONFIG_SOC_APLL_MULTIPLIER_OUT_MAX_HZ=500000000 +CONFIG_SOC_APLL_MIN_HZ=5303031 +CONFIG_SOC_APLL_MAX_HZ=125000000 +CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y +CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y +CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y +CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y +CONFIG_SOC_SDMMC_USE_IOMUX=y +CONFIG_SOC_SDMMC_NUM_SLOTS=2 +CONFIG_SOC_WIFI_WAPI_SUPPORT=y +CONFIG_SOC_WIFI_CSI_SUPPORT=y +CONFIG_SOC_WIFI_MESH_SUPPORT=y +CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y +CONFIG_SOC_WIFI_NAN_SUPPORT=y +CONFIG_SOC_BLE_SUPPORTED=y +CONFIG_SOC_BLE_MESH_SUPPORTED=y +CONFIG_SOC_BT_CLASSIC_SUPPORTED=y +CONFIG_SOC_BLUFI_SUPPORTED=y +CONFIG_SOC_ULP_HAS_ADC=y +CONFIG_IDF_CMAKE=y +CONFIG_IDF_TARGET_ARCH_XTENSA=y +CONFIG_IDF_TARGET_ARCH="xtensa" +CONFIG_IDF_TARGET="esp32" +CONFIG_IDF_TARGET_ESP32=y +CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000 + +# +# Build type +# +CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y +# CONFIG_APP_BUILD_TYPE_RAM is not set +CONFIG_APP_BUILD_GENERATE_BINARIES=y +CONFIG_APP_BUILD_BOOTLOADER=y +CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y +# CONFIG_APP_REPRODUCIBLE_BUILD is not set +# CONFIG_APP_NO_BLOBS is not set +# CONFIG_APP_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set +# CONFIG_APP_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set +# end of Build type + +# +# Bootloader config +# +CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000 +CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set +CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y +# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set +CONFIG_BOOTLOADER_LOG_LEVEL=3 +# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set +CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y +# CONFIG_BOOTLOADER_FACTORY_RESET is not set +# CONFIG_BOOTLOADER_APP_TEST is not set +CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y +CONFIG_BOOTLOADER_WDT_ENABLE=y +# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set +CONFIG_BOOTLOADER_WDT_TIME_MS=9000 +# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set +CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 +# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set +CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y +# end of Bootloader config + +# +# Security features +# +CONFIG_SECURE_BOOT_V1_SUPPORTED=y +# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set +# CONFIG_SECURE_BOOT is not set +# CONFIG_SECURE_FLASH_ENC_ENABLED is not set +# end of Security features + +# +# Application manager +# +CONFIG_APP_COMPILE_TIME_DATE=y +# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set +# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set +# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set +CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 +# end of Application manager + +CONFIG_ESP_ROM_HAS_CRC_LE=y +CONFIG_ESP_ROM_HAS_CRC_BE=y +CONFIG_ESP_ROM_HAS_MZ_CRC32=y +CONFIG_ESP_ROM_HAS_JPEG_DECODE=y +CONFIG_ESP_ROM_HAS_UART_BUF_SWITCH=y +CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y +CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y + +# +# Serial flasher config +# +# CONFIG_ESPTOOLPY_NO_STUB is not set +# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set +# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set +CONFIG_ESPTOOLPY_FLASHMODE_DIO=y +# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set +CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y +CONFIG_ESPTOOLPY_FLASHMODE="dio" +# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set +CONFIG_ESPTOOLPY_FLASHFREQ_40M=y +# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set +# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set +CONFIG_ESPTOOLPY_FLASHFREQ="40m" +# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y +# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE="2MB" +# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set +CONFIG_ESPTOOLPY_BEFORE_RESET=y +# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set +CONFIG_ESPTOOLPY_BEFORE="default_reset" +CONFIG_ESPTOOLPY_AFTER_RESET=y +# CONFIG_ESPTOOLPY_AFTER_NORESET is not set +CONFIG_ESPTOOLPY_AFTER="hard_reset" +CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 +# end of Serial flasher config + +# +# Partition Table +# +CONFIG_PARTITION_TABLE_SINGLE_APP=y +# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set +# CONFIG_PARTITION_TABLE_TWO_OTA is not set +# CONFIG_PARTITION_TABLE_CUSTOM is not set +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" +CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv" +CONFIG_PARTITION_TABLE_OFFSET=0x8000 +CONFIG_PARTITION_TABLE_MD5=y +# end of Partition Table + +# +# Compiler options +# +CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y +# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set +# CONFIG_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_COMPILER_OPTIMIZATION_NONE is not set +CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set +CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y +CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set +CONFIG_COMPILER_HIDE_PATHS_MACROS=y +# CONFIG_COMPILER_CXX_EXCEPTIONS is not set +# CONFIG_COMPILER_CXX_RTTI is not set +CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y +# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set +# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set +# CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set +# CONFIG_COMPILER_DUMP_RTL_FILES is not set +# end of Compiler options + +# +# Component config +# + +# +# Application Level Tracing +# +# CONFIG_APPTRACE_DEST_JTAG is not set +CONFIG_APPTRACE_DEST_NONE=y +# CONFIG_APPTRACE_DEST_UART1 is not set +# CONFIG_APPTRACE_DEST_UART2 is not set +CONFIG_APPTRACE_DEST_UART_NONE=y +CONFIG_APPTRACE_UART_TASK_PRIO=1 +CONFIG_APPTRACE_LOCK_ENABLE=y +# end of Application Level Tracing + +# +# Bluetooth +# +# CONFIG_BT_ENABLED is not set +# end of Bluetooth + +# +# Driver Configurations +# + +# +# Legacy ADC Configuration +# +CONFIG_ADC_DISABLE_DAC=y +# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set + +# +# Legacy ADC Calibration Configuration +# +CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y +CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y +CONFIG_ADC_CAL_LUT_ENABLE=y +# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set +# end of Legacy ADC Calibration Configuration +# end of Legacy ADC Configuration + +# +# SPI Configuration +# +# CONFIG_SPI_MASTER_IN_IRAM is not set +CONFIG_SPI_MASTER_ISR_IN_IRAM=y +# CONFIG_SPI_SLAVE_IN_IRAM is not set +CONFIG_SPI_SLAVE_ISR_IN_IRAM=y +# end of SPI Configuration + +# +# TWAI Configuration +# +# CONFIG_TWAI_ISR_IN_IRAM is not set +CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC=y +CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST=y +CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID=y +CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT=y +CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y +# end of TWAI Configuration + +# +# UART Configuration +# +# CONFIG_UART_ISR_IN_IRAM is not set +# end of UART Configuration + +# +# GPIO Configuration +# +# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set +# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set +# end of GPIO Configuration + +# +# Sigma Delta Modulator Configuration +# +# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set +# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_SDM_ENABLE_DEBUG_LOG is not set +# end of Sigma Delta Modulator Configuration + +# +# GPTimer Configuration +# +# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set +# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set +# end of GPTimer Configuration + +# +# PCNT Configuration +# +# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set +# CONFIG_PCNT_ISR_IRAM_SAFE is not set +# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set +# end of PCNT Configuration + +# +# RMT Configuration +# +# CONFIG_RMT_ISR_IRAM_SAFE is not set +# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_RMT_ENABLE_DEBUG_LOG is not set +# end of RMT Configuration + +# +# MCPWM Configuration +# +# CONFIG_MCPWM_ISR_IRAM_SAFE is not set +# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set +# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set +# end of MCPWM Configuration + +# +# I2S Configuration +# +# CONFIG_I2S_ISR_IRAM_SAFE is not set +# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_I2S_ENABLE_DEBUG_LOG is not set +# end of I2S Configuration + +# +# DAC Configuration +# +# CONFIG_DAC_CTRL_FUNC_IN_IRAM is not set +# CONFIG_DAC_ISR_IRAM_SAFE is not set +# CONFIG_DAC_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_DAC_ENABLE_DEBUG_LOG is not set +CONFIG_DAC_DMA_AUTO_16BIT_ALIGN=y +# end of DAC Configuration +# end of Driver Configurations + +# +# eFuse Bit Manager +# +# CONFIG_EFUSE_CUSTOM_TABLE is not set +# CONFIG_EFUSE_VIRTUAL is not set +# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set +CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y +# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set +CONFIG_EFUSE_MAX_BLK_LEN=192 +# end of eFuse Bit Manager + +# +# ESP-TLS +# +CONFIG_ESP_TLS_USING_MBEDTLS=y +# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set +# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set +# CONFIG_ESP_TLS_SERVER is not set +# CONFIG_ESP_TLS_PSK_VERIFICATION is not set +# CONFIG_ESP_TLS_INSECURE is not set +# end of ESP-TLS + +# +# ADC and ADC Calibration +# +# CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set +# CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set + +# +# ADC Calibration Configurations +# +CONFIG_ADC_CALI_EFUSE_TP_ENABLE=y +CONFIG_ADC_CALI_EFUSE_VREF_ENABLE=y +CONFIG_ADC_CALI_LUT_ENABLE=y +# end of ADC Calibration Configurations + +CONFIG_ADC_DISABLE_DAC_OUTPUT=y +# end of ADC and ADC Calibration + +# +# Wireless Coexistence +# +# end of Wireless Coexistence + +# +# Common ESP-related +# +CONFIG_ESP_ERR_TO_NAME_LOOKUP=y +# end of Common ESP-related + +# +# Ethernet +# +CONFIG_ETH_ENABLED=y +CONFIG_ETH_USE_ESP32_EMAC=y +CONFIG_ETH_PHY_INTERFACE_RMII=y +CONFIG_ETH_RMII_CLK_INPUT=y +# CONFIG_ETH_RMII_CLK_OUTPUT is not set +CONFIG_ETH_RMII_CLK_IN_GPIO=0 +CONFIG_ETH_DMA_BUFFER_SIZE=512 +CONFIG_ETH_DMA_RX_BUFFER_NUM=10 +CONFIG_ETH_DMA_TX_BUFFER_NUM=10 +CONFIG_ETH_USE_SPI_ETHERNET=y +# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set +# CONFIG_ETH_SPI_ETHERNET_W5500 is not set +# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set +# CONFIG_ETH_USE_OPENETH is not set +# CONFIG_ETH_TRANSMIT_MUTEX is not set +# end of Ethernet + +# +# Event Loop Library +# +# CONFIG_ESP_EVENT_LOOP_PROFILING is not set +CONFIG_ESP_EVENT_POST_FROM_ISR=y +CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y +# end of Event Loop Library + +# +# GDB Stub +# +# end of GDB Stub + +# +# ESP HTTP client +# +CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y +# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set +# CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set +# end of ESP HTTP client + +# +# HTTP Server +# +CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 +CONFIG_HTTPD_MAX_URI_LEN=512 +CONFIG_HTTPD_ERR_RESP_NO_DELAY=y +CONFIG_HTTPD_PURGE_BUF_LEN=32 +# CONFIG_HTTPD_LOG_PURGE_DATA is not set +# CONFIG_HTTPD_WS_SUPPORT is not set +# CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set +# end of HTTP Server + +# +# ESP HTTPS OTA +# +# CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set +# CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set +# end of ESP HTTPS OTA + +# +# ESP HTTPS server +# +# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set +# end of ESP HTTPS server + +# +# Hardware Settings +# + +# +# Chip revision +# +CONFIG_ESP32_REV_MIN_0=y +# CONFIG_ESP32_REV_MIN_1 is not set +# CONFIG_ESP32_REV_MIN_1_1 is not set +# CONFIG_ESP32_REV_MIN_2 is not set +# CONFIG_ESP32_REV_MIN_3 is not set +# CONFIG_ESP32_REV_MIN_3_1 is not set +CONFIG_ESP32_REV_MIN=0 +CONFIG_ESP32_REV_MIN_FULL=0 +CONFIG_ESP_REV_MIN_FULL=0 + +# +# Maximum Supported ESP32 Revision (Rev v3.99) +# +CONFIG_ESP32_REV_MAX_FULL=399 +CONFIG_ESP_REV_MAX_FULL=399 +# end of Chip revision + +# +# MAC Config +# +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y +CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y +# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set +CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y +CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 +# CONFIG_ESP_MAC_IGNORE_MAC_CRC_ERROR is not set +# end of MAC Config + +# +# Sleep Config +# +# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set +CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y +# CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU is not set +CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y +# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set +CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000 +# end of Sleep Config + +# +# RTC Clock Config +# +CONFIG_RTC_CLK_SRC_INT_RC=y +# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set +CONFIG_RTC_CLK_CAL_CYCLES=1024 +# end of RTC Clock Config + +# +# Peripheral Control +# +CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y +# end of Peripheral Control + +# +# Main XTAL Config +# +# CONFIG_XTAL_FREQ_26 is not set +CONFIG_XTAL_FREQ_40=y +# CONFIG_XTAL_FREQ_AUTO is not set +CONFIG_XTAL_FREQ=40 +# end of Main XTAL Config +# end of Hardware Settings + +# +# LCD and Touch Panel +# + +# +# LCD Touch Drivers are maintained in the IDF Component Registry +# + +# +# LCD Peripheral Configuration +# +CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 +# CONFIG_LCD_ENABLE_DEBUG_LOG is not set +# end of LCD Peripheral Configuration +# end of LCD and Touch Panel + +# +# ESP NETIF Adapter +# +CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 +CONFIG_ESP_NETIF_TCPIP_LWIP=y +# CONFIG_ESP_NETIF_LOOPBACK is not set +CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y +# CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set +# CONFIG_ESP_NETIF_L2_TAP is not set +# CONFIG_ESP_NETIF_BRIDGE_EN is not set +# end of ESP NETIF Adapter + +# +# Partition API Configuration +# +# end of Partition API Configuration + +# +# PHY +# +CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP_PHY_MAX_TX_POWER=20 +# CONFIG_ESP_PHY_REDUCE_TX_POWER is not set +CONFIG_ESP_PHY_RF_CAL_PARTIAL=y +# CONFIG_ESP_PHY_RF_CAL_NONE is not set +# CONFIG_ESP_PHY_RF_CAL_FULL is not set +CONFIG_ESP_PHY_CALIBRATION_MODE=0 +# end of PHY + +# +# Power Management +# +# CONFIG_PM_ENABLE is not set +# end of Power Management + +# +# ESP PSRAM +# +# CONFIG_SPIRAM is not set +# end of ESP PSRAM + +# +# ESP Ringbuf +# +# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set +# end of ESP Ringbuf + +# +# ESP System Settings +# +# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set +CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y +# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240 is not set +CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160 + +# +# Memory +# +# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set + +# +# Non-backward compatible options +# +# CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM is not set +# end of Non-backward compatible options +# end of Memory + +# +# Trace memory +# +# CONFIG_ESP32_TRAX is not set +CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0 +# end of Trace memory + +# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set +CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y +# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set +# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set +CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0 + +# +# Memory protection +# +# end of Memory protection + +CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 +CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y +# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set +# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 +CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 +CONFIG_ESP_CONSOLE_UART_DEFAULT=y +# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set +# CONFIG_ESP_CONSOLE_NONE is not set +CONFIG_ESP_CONSOLE_UART=y +CONFIG_ESP_CONSOLE_MULTIPLE_UART=y +CONFIG_ESP_CONSOLE_UART_NUM=0 +CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 +CONFIG_ESP_INT_WDT=y +CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 +CONFIG_ESP_INT_WDT_CHECK_CPU1=y +CONFIG_ESP_TASK_WDT_EN=y +CONFIG_ESP_TASK_WDT_INIT=y +# CONFIG_ESP_TASK_WDT_PANIC is not set +CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP_PANIC_HANDLER_IRAM is not set +# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set +CONFIG_ESP_DEBUG_OCDAWARE=y +# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set +CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y + +# +# Brownout Detector +# +CONFIG_ESP_BROWNOUT_DET=y +CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0=y +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 is not set +CONFIG_ESP_BROWNOUT_DET_LVL=0 +# end of Brownout Detector + +# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set +CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y +# end of ESP System Settings + +# +# IPC (Inter-Processor Call) +# +CONFIG_ESP_IPC_TASK_STACK_SIZE=1024 +CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y +CONFIG_ESP_IPC_ISR_ENABLE=y +# end of IPC (Inter-Processor Call) + +# +# High resolution timer (esp_timer) +# +# CONFIG_ESP_TIMER_PROFILING is not set +CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y +CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y +CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 +# CONFIG_ESP_TIMER_SHOW_EXPERIMENTAL is not set +CONFIG_ESP_TIMER_TASK_AFFINITY=0x0 +CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0=y +CONFIG_ESP_TIMER_ISR_AFFINITY=0x1 +CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0=y +# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set +CONFIG_ESP_TIMER_IMPL_TG0_LAC=y +# end of High resolution timer (esp_timer) + +# +# Wi-Fi +# +CONFIG_ESP_WIFI_ENABLED=y +CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10 +CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +# CONFIG_ESP_WIFI_STATIC_TX_BUFFER is not set +CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER=y +CONFIG_ESP_WIFI_TX_BUFFER_TYPE=1 +CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=32 +# CONFIG_ESP_WIFI_CSI_ENABLED is not set +CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y +CONFIG_ESP_WIFI_TX_BA_WIN=6 +CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP_WIFI_RX_BA_WIN=6 +CONFIG_ESP_WIFI_NVS_ENABLED=y +CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y +# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set +CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752 +CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32 +CONFIG_ESP_WIFI_IRAM_OPT=y +CONFIG_ESP_WIFI_RX_IRAM_OPT=y +CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=y +CONFIG_ESP_WIFI_ENABLE_SAE_PK=y +CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT=y +CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=y +# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set +CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=y +# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set +CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y +# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set +CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7 +# CONFIG_ESP_WIFI_NAN_ENABLE is not set +CONFIG_ESP_WIFI_MBEDTLS_CRYPTO=y +CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT=y +# CONFIG_ESP_WIFI_WAPI_PSK is not set +# CONFIG_ESP_WIFI_SUITE_B_192 is not set +# CONFIG_ESP_WIFI_11KV_SUPPORT is not set +# CONFIG_ESP_WIFI_MBO_SUPPORT is not set +# CONFIG_ESP_WIFI_DPP_SUPPORT is not set +# CONFIG_ESP_WIFI_11R_SUPPORT is not set +# CONFIG_ESP_WIFI_WPS_SOFTAP_REGISTRAR is not set + +# +# WPS Configuration Options +# +# CONFIG_ESP_WIFI_WPS_STRICT is not set +# CONFIG_ESP_WIFI_WPS_PASSPHRASE is not set +# end of WPS Configuration Options + +# CONFIG_ESP_WIFI_DEBUG_PRINT is not set +# CONFIG_ESP_WIFI_TESTING_OPTIONS is not set +# end of Wi-Fi + +# +# Core dump +# +# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set +# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set +CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y +# end of Core dump + +# +# FAT Filesystem support +# +CONFIG_FATFS_VOLUME_COUNT=2 +CONFIG_FATFS_LFN_NONE=y +# CONFIG_FATFS_LFN_HEAP is not set +# CONFIG_FATFS_LFN_STACK is not set +# CONFIG_FATFS_SECTOR_512 is not set +CONFIG_FATFS_SECTOR_4096=y +# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set +CONFIG_FATFS_CODEPAGE_437=y +# CONFIG_FATFS_CODEPAGE_720 is not set +# CONFIG_FATFS_CODEPAGE_737 is not set +# CONFIG_FATFS_CODEPAGE_771 is not set +# CONFIG_FATFS_CODEPAGE_775 is not set +# CONFIG_FATFS_CODEPAGE_850 is not set +# CONFIG_FATFS_CODEPAGE_852 is not set +# CONFIG_FATFS_CODEPAGE_855 is not set +# CONFIG_FATFS_CODEPAGE_857 is not set +# CONFIG_FATFS_CODEPAGE_860 is not set +# CONFIG_FATFS_CODEPAGE_861 is not set +# CONFIG_FATFS_CODEPAGE_862 is not set +# CONFIG_FATFS_CODEPAGE_863 is not set +# CONFIG_FATFS_CODEPAGE_864 is not set +# CONFIG_FATFS_CODEPAGE_865 is not set +# CONFIG_FATFS_CODEPAGE_866 is not set +# CONFIG_FATFS_CODEPAGE_869 is not set +# CONFIG_FATFS_CODEPAGE_932 is not set +# CONFIG_FATFS_CODEPAGE_936 is not set +# CONFIG_FATFS_CODEPAGE_949 is not set +# CONFIG_FATFS_CODEPAGE_950 is not set +CONFIG_FATFS_CODEPAGE=437 +CONFIG_FATFS_FS_LOCK=0 +CONFIG_FATFS_TIMEOUT_MS=10000 +CONFIG_FATFS_PER_FILE_CACHE=y +# CONFIG_FATFS_USE_FASTSEEK is not set +CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0 +# end of FAT Filesystem support + +# +# FreeRTOS +# + +# +# Kernel +# +# CONFIG_FREERTOS_SMP is not set +# CONFIG_FREERTOS_UNICORE is not set +CONFIG_FREERTOS_HZ=100 +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set +CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y +CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 +CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 +# CONFIG_FREERTOS_USE_IDLE_HOOK is not set +# CONFIG_FREERTOS_USE_TICK_HOOK is not set +CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 +# CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set +CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 +CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 +CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 +CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1 +# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set +# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set +# end of Kernel + +# +# Port +# +CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y +# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set +CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y +# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set +CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y +CONFIG_FREERTOS_ISR_STACKSIZE=1536 +CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y +# CONFIG_FREERTOS_FPU_IN_ISR is not set +CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y +CONFIG_FREERTOS_CORETIMER_0=y +# CONFIG_FREERTOS_CORETIMER_1 is not set +CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y +# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set +# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set +# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set +CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y +# end of Port + +CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y +CONFIG_FREERTOS_DEBUG_OCDAWARE=y +# end of FreeRTOS + +# +# Hardware Abstraction Layer (HAL) and Low Level (LL) +# +CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y +# CONFIG_HAL_ASSERTION_DISABLE is not set +# CONFIG_HAL_ASSERTION_SILENT is not set +# CONFIG_HAL_ASSERTION_ENABLE is not set +CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 +CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y +CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y +# end of Hardware Abstraction Layer (HAL) and Low Level (LL) + +# +# Heap memory debugging +# +CONFIG_HEAP_POISONING_DISABLED=y +# CONFIG_HEAP_POISONING_LIGHT is not set +# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set +CONFIG_HEAP_TRACING_OFF=y +# CONFIG_HEAP_TRACING_STANDALONE is not set +# CONFIG_HEAP_TRACING_TOHOST is not set +# CONFIG_HEAP_USE_HOOKS is not set +# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set +# CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH is not set +# end of Heap memory debugging + +CONFIG_IEEE802154_CCA_THRESHOLD=-60 +CONFIG_IEEE802154_PENDING_TABLE_SIZE=20 + +# +# Log output +# +# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set +# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set +# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set +CONFIG_LOG_DEFAULT_LEVEL_INFO=y +# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set +# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set +CONFIG_LOG_DEFAULT_LEVEL=3 +CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y +# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set +# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set +CONFIG_LOG_MAXIMUM_LEVEL=3 +CONFIG_LOG_COLORS=y +CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y +# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set +# end of Log output + +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="espressif" +# CONFIG_LWIP_NETIF_API is not set +# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set +# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set +CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y +# CONFIG_LWIP_L2_TO_L3_COPY is not set +# CONFIG_LWIP_IRAM_OPTIMIZATION is not set +CONFIG_LWIP_TIMERS_ONDEMAND=y +CONFIG_LWIP_MAX_SOCKETS=10 +# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set +# CONFIG_LWIP_SO_LINGER is not set +CONFIG_LWIP_SO_REUSE=y +CONFIG_LWIP_SO_REUSE_RXTOALL=y +# CONFIG_LWIP_SO_RCVBUF is not set +# CONFIG_LWIP_NETBUF_RECVINFO is not set +CONFIG_LWIP_IP4_FRAG=y +CONFIG_LWIP_IP6_FRAG=y +# CONFIG_LWIP_IP4_REASSEMBLY is not set +# CONFIG_LWIP_IP6_REASSEMBLY is not set +CONFIG_LWIP_IP_REASS_MAX_PBUFS=10 +# CONFIG_LWIP_IP_FORWARD is not set +# CONFIG_LWIP_STATS is not set +CONFIG_LWIP_ESP_GRATUITOUS_ARP=y +CONFIG_LWIP_GARP_TMR_INTERVAL=60 +CONFIG_LWIP_ESP_MLDV6_REPORT=y +CONFIG_LWIP_MLDV6_TMR_INTERVAL=40 +CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 +CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y +# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set +CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y +# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set +CONFIG_LWIP_DHCP_OPTIONS_LEN=68 +CONFIG_LWIP_NUM_NETIF_CLIENT_DATA=0 +CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1 + +# +# DHCP server +# +CONFIG_LWIP_DHCPS=y +CONFIG_LWIP_DHCPS_LEASE_UNIT=60 +CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 +# end of DHCP server + +# CONFIG_LWIP_AUTOIP is not set +CONFIG_LWIP_IPV4=y +CONFIG_LWIP_IPV6=y +# CONFIG_LWIP_IPV6_AUTOCONFIG is not set +CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 +# CONFIG_LWIP_IPV6_FORWARD is not set +# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set +CONFIG_LWIP_NETIF_LOOPBACK=y +CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 + +# +# TCP +# +CONFIG_LWIP_MAX_ACTIVE_TCP=16 +CONFIG_LWIP_MAX_LISTENING_TCP=16 +CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y +CONFIG_LWIP_TCP_MAXRTX=12 +CONFIG_LWIP_TCP_SYNMAXRTX=12 +CONFIG_LWIP_TCP_MSS=1440 +CONFIG_LWIP_TCP_TMR_INTERVAL=250 +CONFIG_LWIP_TCP_MSL=60000 +CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000 +CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 +CONFIG_LWIP_TCP_WND_DEFAULT=5744 +CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 +CONFIG_LWIP_TCP_QUEUE_OOSEQ=y +# CONFIG_LWIP_TCP_SACK_OUT is not set +CONFIG_LWIP_TCP_OVERSIZE_MSS=y +# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set +CONFIG_LWIP_TCP_RTO_TIME=1500 +# end of TCP + +# +# UDP +# +CONFIG_LWIP_MAX_UDP_PCBS=16 +CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 +# end of UDP + +# +# Checksums +# +# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set +# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set +CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y +# end of Checksums + +CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set +CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_LWIP_PPP_SUPPORT is not set +CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 +CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 +# CONFIG_LWIP_SLIP_SUPPORT is not set + +# +# ICMP +# +CONFIG_LWIP_ICMP=y +# CONFIG_LWIP_MULTICAST_PING is not set +# CONFIG_LWIP_BROADCAST_PING is not set +# end of ICMP + +# +# LWIP RAW API +# +CONFIG_LWIP_MAX_RAW_PCBS=16 +# end of LWIP RAW API + +# +# SNTP +# +CONFIG_LWIP_SNTP_MAX_SERVERS=1 +# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set +CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 +# end of SNTP + +CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7 +CONFIG_LWIP_ESP_LWIP_ASSERT=y + +# +# Hooks +# +# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set +CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y +# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y +# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set +CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y +# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set +# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y +# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM is not set +CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_INPUT_NONE=y +# CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set +# end of Hooks + +# CONFIG_LWIP_DEBUG is not set +# end of LWIP + +# +# mbedTLS +# +CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y +# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set +# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set +CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y +CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 +CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 +# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set +# CONFIG_MBEDTLS_DEBUG is not set + +# +# mbedTLS v3.x related +# +# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set +# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set +# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set +# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set +CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y +CONFIG_MBEDTLS_PKCS7_C=y +# end of mbedTLS v3.x related + +# +# Certificate Bundle +# +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set +# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200 +# end of Certificate Bundle + +# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set +# CONFIG_MBEDTLS_CMAC_C is not set +CONFIG_MBEDTLS_HARDWARE_AES=y +CONFIG_MBEDTLS_HARDWARE_MPI=y +CONFIG_MBEDTLS_HARDWARE_SHA=y +CONFIG_MBEDTLS_ROM_MD5=y +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set +CONFIG_MBEDTLS_HAVE_TIME=y +# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set +# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set +CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y +CONFIG_MBEDTLS_SHA512_C=y +CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y +# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set +# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set +# CONFIG_MBEDTLS_TLS_DISABLED is not set +CONFIG_MBEDTLS_TLS_SERVER=y +CONFIG_MBEDTLS_TLS_CLIENT=y +CONFIG_MBEDTLS_TLS_ENABLED=y + +# +# TLS Key Exchange Methods +# +# CONFIG_MBEDTLS_PSK_MODES is not set +CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y +# end of TLS Key Exchange Methods + +CONFIG_MBEDTLS_SSL_RENEGOTIATION=y +CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y +# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set +# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set +CONFIG_MBEDTLS_SSL_ALPN=y +CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y +CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y + +# +# Symmetric Ciphers +# +CONFIG_MBEDTLS_AES_C=y +# CONFIG_MBEDTLS_CAMELLIA_C is not set +# CONFIG_MBEDTLS_DES_C is not set +# CONFIG_MBEDTLS_BLOWFISH_C is not set +# CONFIG_MBEDTLS_XTEA_C is not set +CONFIG_MBEDTLS_CCM_C=y +CONFIG_MBEDTLS_GCM_C=y +# CONFIG_MBEDTLS_NIST_KW_C is not set +# end of Symmetric Ciphers + +# CONFIG_MBEDTLS_RIPEMD160_C is not set + +# +# Certificates +# +CONFIG_MBEDTLS_PEM_PARSE_C=y +CONFIG_MBEDTLS_PEM_WRITE_C=y +CONFIG_MBEDTLS_X509_CRL_PARSE_C=y +CONFIG_MBEDTLS_X509_CSR_PARSE_C=y +# end of Certificates + +CONFIG_MBEDTLS_ECP_C=y +# CONFIG_MBEDTLS_DHM_C is not set +CONFIG_MBEDTLS_ECDH_C=y +CONFIG_MBEDTLS_ECDSA_C=y +# CONFIG_MBEDTLS_ECJPAKE_C is not set +CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y +CONFIG_MBEDTLS_ECP_NIST_OPTIM=y +# CONFIG_MBEDTLS_POLY1305_C is not set +# CONFIG_MBEDTLS_CHACHA20_C is not set +# CONFIG_MBEDTLS_HKDF_C is not set +# CONFIG_MBEDTLS_THREADING_C is not set +# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set +# CONFIG_MBEDTLS_SECURITY_RISKS is not set +# end of mbedTLS + +# +# ESP-MQTT Configurations +# +CONFIG_MQTT_PROTOCOL_311=y +# CONFIG_MQTT_PROTOCOL_5 is not set +CONFIG_MQTT_TRANSPORT_SSL=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y +# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set +# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set +# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set +# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set +# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set +# CONFIG_MQTT_CUSTOM_OUTBOX is not set +# end of ESP-MQTT Configurations + +# +# Newlib +# +CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set +CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y +# CONFIG_NEWLIB_NANO_FORMAT is not set +CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y +# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set +# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set +# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set +# end of Newlib + +# +# NVS +# +# CONFIG_NVS_ASSERT_ERROR_CHECK is not set +# end of NVS + +# +# OpenThread +# +# CONFIG_OPENTHREAD_ENABLED is not set + +# +# Thread Operational Dataset +# +CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP" +CONFIG_OPENTHREAD_NETWORK_CHANNEL=15 +CONFIG_OPENTHREAD_NETWORK_PANID=0x1234 +CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe" +CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff" +CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53" +# end of Thread Operational Dataset +# end of OpenThread + +# +# Protocomm +# +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y +# end of Protocomm + +# +# PThreads +# +CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_PTHREAD_STACK_MIN=768 +CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y +# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set +# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set +CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" +# end of PThreads + +# +# MMU Config +# +CONFIG_MMU_PAGE_SIZE_64KB=y +CONFIG_MMU_PAGE_MODE="64KB" +CONFIG_MMU_PAGE_SIZE=0x10000 +# end of MMU Config + +# +# SPI Flash driver +# +# CONFIG_SPI_FLASH_VERIFY_WRITE is not set +# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set +CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y +CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set +# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set +# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set +CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y +CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 +CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 +CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 +# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set +# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set +# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set + +# +# SPI Flash behavior when brownout +# +CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y +CONFIG_SPI_FLASH_BROWNOUT_RESET=y +# end of SPI Flash behavior when brownout + +# +# Auto-detect flash chips +# +CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED=y +CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y +# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set +# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set +# end of Auto-detect flash chips + +CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y +# end of SPI Flash driver + +# +# SPIFFS Configuration +# +CONFIG_SPIFFS_MAX_PARTITIONS=3 + +# +# SPIFFS Cache Configuration +# +CONFIG_SPIFFS_CACHE=y +CONFIG_SPIFFS_CACHE_WR=y +# CONFIG_SPIFFS_CACHE_STATS is not set +# end of SPIFFS Cache Configuration + +CONFIG_SPIFFS_PAGE_CHECK=y +CONFIG_SPIFFS_GC_MAX_RUNS=10 +# CONFIG_SPIFFS_GC_STATS is not set +CONFIG_SPIFFS_PAGE_SIZE=256 +CONFIG_SPIFFS_OBJ_NAME_LEN=32 +# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set +CONFIG_SPIFFS_USE_MAGIC=y +CONFIG_SPIFFS_USE_MAGIC_LENGTH=y +CONFIG_SPIFFS_META_LENGTH=4 +CONFIG_SPIFFS_USE_MTIME=y + +# +# Debug Configuration +# +# CONFIG_SPIFFS_DBG is not set +# CONFIG_SPIFFS_API_DBG is not set +# CONFIG_SPIFFS_GC_DBG is not set +# CONFIG_SPIFFS_CACHE_DBG is not set +# CONFIG_SPIFFS_CHECK_DBG is not set +# CONFIG_SPIFFS_TEST_VISUALISATION is not set +# end of Debug Configuration +# end of SPIFFS Configuration + +# +# TCP Transport +# + +# +# Websocket +# +CONFIG_WS_TRANSPORT=y +CONFIG_WS_BUFFER_SIZE=1024 +# CONFIG_WS_DYNAMIC_BUFFER is not set +# end of Websocket +# end of TCP Transport + +# +# Ultra Low Power (ULP) Co-processor +# +# CONFIG_ULP_COPROC_ENABLED is not set +# end of Ultra Low Power (ULP) Co-processor + +# +# Unity unit testing library +# +CONFIG_UNITY_ENABLE_FLOAT=y +CONFIG_UNITY_ENABLE_DOUBLE=y +# CONFIG_UNITY_ENABLE_64BIT is not set +# CONFIG_UNITY_ENABLE_COLOR is not set +CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y +# CONFIG_UNITY_ENABLE_FIXTURE is not set +# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set +# end of Unity unit testing library + +# +# Root Hub configuration +# +# end of Root Hub configuration + +# +# Virtual file system +# +CONFIG_VFS_SUPPORT_IO=y +CONFIG_VFS_SUPPORT_DIR=y +CONFIG_VFS_SUPPORT_SELECT=y +CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_VFS_SUPPORT_TERMIOS=y +CONFIG_VFS_MAX_COUNT=8 + +# +# Host File System I/O (Semihosting) +# +CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +# end of Host File System I/O (Semihosting) +# end of Virtual file system + +# +# Wear Levelling +# +# CONFIG_WL_SECTOR_SIZE_512 is not set +CONFIG_WL_SECTOR_SIZE_4096=y +CONFIG_WL_SECTOR_SIZE=4096 +# end of Wear Levelling + +# +# Wi-Fi Provisioning Manager +# +CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 +CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 +# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set +CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y +# CONFIG_WIFI_PROV_STA_FAST_SCAN is not set +# end of Wi-Fi Provisioning Manager + +# +# SRA Board Component Config +# + +# +# I2C +# +CONFIG_I2CDEV_TIMEOUT=1000 +# CONFIG_I2CDEV_NOLOCK is not set +# end of I2C + +# CONFIG_ENABLE_OLED is not set +CONFIG_WALL_E_LOGO_TEXT="Wall-E 2023" +CONFIG_MARIO_LOGO_TEXT="MARIO 2023" + +# +# Servo motor configuration +# + +# +# Servo A +# +CONFIG_SERVO_A_MIN_PULSEWIDTH=500 +CONFIG_SERVO_A_MAX_PULSEWIDTH=3000 +CONFIG_SERVO_A_MAX_DEGREE=180 +# end of Servo A + +# +# Servo B +# +CONFIG_SERVO_B_MIN_PULSEWIDTH=500 +CONFIG_SERVO_B_MAX_PULSEWIDTH=3000 +CONFIG_SERVO_B_MAX_DEGREE=180 +# end of Servo B + +# +# Servo C +# +CONFIG_SERVO_C_MIN_PULSEWIDTH=500 +CONFIG_SERVO_C_MAX_PULSEWIDTH=3000 +CONFIG_SERVO_C_MAX_DEGREE=180 +# end of Servo C + +# +# Servo D +# +CONFIG_SERVO_D_MIN_PULSEWIDTH=500 +CONFIG_SERVO_D_MAX_PULSEWIDTH=3000 +CONFIG_SERVO_D_MAX_DEGREE=180 +# end of Servo D +# end of Servo motor configuration + +CONFIG_NUMBER_OF_SAMPLES=64 +CONFIG_MPU_CALIBRATION_AVG_COUNT=100 +# end of SRA Board Component Config +# end of Component config + +# CONFIG_IDF_EXPERIMENTAL_FEATURES is not set + +# Deprecated options for backward compatibility +# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set +# CONFIG_NO_BLOBS is not set +# CONFIG_ESP32_NO_BLOBS is not set +# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set +# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set +CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y +# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set +CONFIG_LOG_BOOTLOADER_LEVEL=3 +# CONFIG_APP_ROLLBACK_ENABLE is not set +# CONFIG_FLASH_ENCRYPTION_ENABLED is not set +# CONFIG_FLASHMODE_QIO is not set +# CONFIG_FLASHMODE_QOUT is not set +CONFIG_FLASHMODE_DIO=y +# CONFIG_FLASHMODE_DOUT is not set +CONFIG_MONITOR_BAUD=115200 +CONFIG_OPTIMIZATION_LEVEL_DEBUG=y +CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y +# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set +# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set +CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y +# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set +CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_CXX_EXCEPTIONS is not set +CONFIG_STACK_CHECK_NONE=y +# CONFIG_STACK_CHECK_NORM is not set +# CONFIG_STACK_CHECK_STRONG is not set +# CONFIG_STACK_CHECK_ALL is not set +# CONFIG_WARN_WRITE_STRINGS is not set +# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set +CONFIG_ESP32_APPTRACE_DEST_NONE=y +CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y +CONFIG_ADC2_DISABLE_DAC=y +# CONFIG_MCPWM_ISR_IN_IRAM is not set +# CONFIG_EVENT_LOOP_PROFILING is not set +CONFIG_POST_EVENTS_FROM_ISR=y +CONFIG_POST_EVENTS_FROM_IRAM_ISR=y +# CONFIG_OTA_ALLOW_HTTP is not set +# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set +CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y +CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4 +# CONFIG_ESP_SYSTEM_PD_FLASH is not set +CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 +CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y +CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y +# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set +# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set +# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set +# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set +CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024 +# CONFIG_ESP32_XTAL_FREQ_26 is not set +CONFIG_ESP32_XTAL_FREQ_40=y +# CONFIG_ESP32_XTAL_FREQ_AUTO is not set +CONFIG_ESP32_XTAL_FREQ=40 +CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP32_PHY_MAX_TX_POWER=20 +# CONFIG_REDUCE_PHY_TX_POWER is not set +# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set +# CONFIG_SPIRAM_SUPPORT is not set +# CONFIG_ESP32_SPIRAM_SUPPORT is not set +# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set +CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y +# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set +CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160 +CONFIG_TRACEMEM_RESERVE_DRAM=0x0 +# CONFIG_ESP32_PANIC_PRINT_HALT is not set +CONFIG_ESP32_PANIC_PRINT_REBOOT=y +# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP32_PANIC_GDBSTUB is not set +CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_MAIN_TASK_STACK_SIZE=3584 +CONFIG_CONSOLE_UART_DEFAULT=y +# CONFIG_CONSOLE_UART_CUSTOM is not set +# CONFIG_CONSOLE_UART_NONE is not set +# CONFIG_ESP_CONSOLE_UART_NONE is not set +CONFIG_CONSOLE_UART=y +CONFIG_CONSOLE_UART_NUM=0 +CONFIG_CONSOLE_UART_BAUDRATE=115200 +CONFIG_INT_WDT=y +CONFIG_INT_WDT_TIMEOUT_MS=300 +CONFIG_INT_WDT_CHECK_CPU1=y +CONFIG_TASK_WDT=y +CONFIG_ESP_TASK_WDT=y +# CONFIG_TASK_WDT_PANIC is not set +CONFIG_TASK_WDT_TIMEOUT_S=5 +CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set +CONFIG_ESP32_DEBUG_OCDAWARE=y +CONFIG_BROWNOUT_DET=y +CONFIG_ESP32_BROWNOUT_DET=y +CONFIG_BROWNOUT_DET_LVL_SEL_0=y +CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y +# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set +CONFIG_BROWNOUT_DET_LVL=0 +CONFIG_ESP32_BROWNOUT_DET_LVL=0 +# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set +CONFIG_IPC_TASK_STACK_SIZE=1024 +CONFIG_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP32_WIFI_ENABLED=y +CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 +CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y +CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_CSI_ENABLED is not set +CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y +CONFIG_ESP32_WIFI_TX_BA_WIN=6 +CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP32_WIFI_RX_BA_WIN=6 +CONFIG_ESP32_WIFI_RX_BA_WIN=6 +CONFIG_ESP32_WIFI_NVS_ENABLED=y +CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y +# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set +CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 +CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 +CONFIG_ESP32_WIFI_IRAM_OPT=y +CONFIG_ESP32_WIFI_RX_IRAM_OPT=y +CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y +CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA=y +CONFIG_WPA_MBEDTLS_CRYPTO=y +CONFIG_WPA_MBEDTLS_TLS_CLIENT=y +# CONFIG_WPA_WAPI_PSK is not set +# CONFIG_WPA_SUITE_B_192 is not set +# CONFIG_WPA_11KV_SUPPORT is not set +# CONFIG_WPA_MBO_SUPPORT is not set +# CONFIG_WPA_DPP_SUPPORT is not set +# CONFIG_WPA_11R_SUPPORT is not set +# CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set +# CONFIG_WPA_WPS_STRICT is not set +# CONFIG_WPA_DEBUG_PRINT is not set +# CONFIG_WPA_TESTING_OPTIONS is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set +CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y +CONFIG_TIMER_TASK_PRIORITY=1 +CONFIG_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_TIMER_QUEUE_LENGTH=10 +# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set +# CONFIG_HAL_ASSERTION_SILIENT is not set +# CONFIG_L2_TO_L3_COPY is not set +CONFIG_ESP_GRATUITOUS_ARP=y +CONFIG_GARP_TMR_INTERVAL=60 +CONFIG_TCPIP_RECVMBOX_SIZE=32 +CONFIG_TCP_MAXRTX=12 +CONFIG_TCP_SYNMAXRTX=12 +CONFIG_TCP_MSS=1440 +CONFIG_TCP_MSL=60000 +CONFIG_TCP_SND_BUF_DEFAULT=5744 +CONFIG_TCP_WND_DEFAULT=5744 +CONFIG_TCP_RECVMBOX_SIZE=6 +CONFIG_TCP_QUEUE_OOSEQ=y +CONFIG_TCP_OVERSIZE_MSS=y +# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_TCP_OVERSIZE_DISABLE is not set +CONFIG_UDP_RECVMBOX_SIZE=6 +CONFIG_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set +# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set +CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_PPP_SUPPORT is not set +CONFIG_ESP32_TIME_SYSCALL_USE_RTC_HRT=y +CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y +# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set +# CONFIG_ESP32_TIME_SYSCALL_USE_HRT is not set +# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set +# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set +CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_ESP32_PTHREAD_STACK_MIN=768 +CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y +# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set +# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set +CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" +CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set +# CONFIG_ESP32_ULP_COPROC_ENABLED is not set +CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_SUPPORT_TERMIOS=y +CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +# End of deprecated options diff --git a/examples/motor_driver_normal/main/main.c b/examples/motor_driver_normal/main/main.c index 10f5a64..9efb7d2 100644 --- a/examples/motor_driver_normal/main/main.c +++ b/examples/motor_driver_normal/main/main.c @@ -27,27 +27,19 @@ #include "freertos/task.h" #include "sra_board.h" -static const char* TAG_SWITCH_CONTROL_MOTOR = "switch_control"; - void app_main(void) { - enable_motor_driver(a, NORMAL_MODE); // Enable motor driver A in Normal Mode - while(1) - { - // Rotate Motors A_0 and A_1 in FORWARD direction - set_motor_speed(MOTOR_A_0, MOTOR_FORWARD, 80); - ESP_LOGI(TAG_SWITCH_CONTROL_MOTOR, "MOTOR_A_0 FORWARD"); - set_motor_speed(MOTOR_A_1, MOTOR_FORWARD, 80); - ESP_LOGI(TAG_SWITCH_CONTROL_MOTOR, "MOTOR_A_1 FORWARD"); - - vTaskDelay(2000 / portTICK_PERIOD_MS); - - // Rotate Motors A_0 and A_1 in BACKWARD direction - set_motor_speed(MOTOR_A_0, MOTOR_BACKWARD, 80); - ESP_LOGI(TAG_SWITCH_CONTROL_MOTOR, "MOTOR_A_0 BACKWARD"); - set_motor_speed(MOTOR_A_1, MOTOR_BACKWARD, 80); - ESP_LOGI(TAG_SWITCH_CONTROL_MOTOR, "MOTOR_A_1 BACKWARD"); - - vTaskDelay(2000 / portTICK_PERIOD_MS); + motor_handle_t motor1; + enable_motor_driver(&motor1, MOTOR_A_1); + while(1){ + set_motor_speed(motor1, MOTOR_FORWARD, 60); + ESP_LOGI("MOTOR", "Forward"); + vTaskDelay(1000 / portTICK_PERIOD_MS); + set_motor_speed(motor1, MOTOR_BACKWARD, 60); + ESP_LOGI("MOTOR", "Backward"); + vTaskDelay(1000 / portTICK_PERIOD_MS); + set_motor_speed(motor1, MOTOR_STOP, 0); + ESP_LOGI("MOTOR", "Stop"); + vTaskDelay(1000 / portTICK_PERIOD_MS); } } diff --git a/examples/motor_driver_normal/sdkconfig b/examples/motor_driver_normal/sdkconfig new file mode 100644 index 0000000..ff31a74 --- /dev/null +++ b/examples/motor_driver_normal/sdkconfig @@ -0,0 +1,1858 @@ +# +# Automatically generated file. DO NOT EDIT. +# Espressif IoT Development Framework (ESP-IDF) 5.1.1 Project Configuration +# +CONFIG_SOC_BROWNOUT_RESET_SUPPORTED="Not determined" +CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED="Not determined" +CONFIG_SOC_DPORT_WORKAROUND="Not determined" +CONFIG_SOC_CAPS_ECO_VER_MAX=301 +CONFIG_SOC_ADC_SUPPORTED=y +CONFIG_SOC_DAC_SUPPORTED=y +CONFIG_SOC_UART_SUPPORTED=y +CONFIG_SOC_MCPWM_SUPPORTED=y +CONFIG_SOC_GPTIMER_SUPPORTED=y +CONFIG_SOC_SDMMC_HOST_SUPPORTED=y +CONFIG_SOC_BT_SUPPORTED=y +CONFIG_SOC_PCNT_SUPPORTED=y +CONFIG_SOC_WIFI_SUPPORTED=y +CONFIG_SOC_SDIO_SLAVE_SUPPORTED=y +CONFIG_SOC_TWAI_SUPPORTED=y +CONFIG_SOC_EMAC_SUPPORTED=y +CONFIG_SOC_ULP_SUPPORTED=y +CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y +CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y +CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y +CONFIG_SOC_RTC_MEM_SUPPORTED=y +CONFIG_SOC_I2S_SUPPORTED=y +CONFIG_SOC_RMT_SUPPORTED=y +CONFIG_SOC_SDM_SUPPORTED=y +CONFIG_SOC_GPSPI_SUPPORTED=y +CONFIG_SOC_LEDC_SUPPORTED=y +CONFIG_SOC_I2C_SUPPORTED=y +CONFIG_SOC_SUPPORT_COEXISTENCE=y +CONFIG_SOC_AES_SUPPORTED=y +CONFIG_SOC_MPI_SUPPORTED=y +CONFIG_SOC_SHA_SUPPORTED=y +CONFIG_SOC_FLASH_ENC_SUPPORTED=y +CONFIG_SOC_SECURE_BOOT_SUPPORTED=y +CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y +CONFIG_SOC_BOD_SUPPORTED=y +CONFIG_SOC_ULP_FSM_SUPPORTED=y +CONFIG_SOC_DPORT_WORKAROUND_DIS_INTERRUPT_LVL=5 +CONFIG_SOC_XTAL_SUPPORT_26M=y +CONFIG_SOC_XTAL_SUPPORT_40M=y +CONFIG_SOC_XTAL_SUPPORT_AUTO_DETECT=y +CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y +CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y +CONFIG_SOC_ADC_DMA_SUPPORTED=y +CONFIG_SOC_ADC_PERIPH_NUM=2 +CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10 +CONFIG_SOC_ADC_ATTEN_NUM=4 +CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2 +CONFIG_SOC_ADC_PATT_LEN_MAX=16 +CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=9 +CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12 +CONFIG_SOC_ADC_DIGI_RESULT_BYTES=2 +CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4 +CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=2 +CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=20 +CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=9 +CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12 +CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y +CONFIG_SOC_IDCACHE_PER_CORE=y +CONFIG_SOC_CPU_CORES_NUM=2 +CONFIG_SOC_CPU_INTR_NUM=32 +CONFIG_SOC_CPU_HAS_FPU=y +CONFIG_SOC_CPU_BREAKPOINTS_NUM=2 +CONFIG_SOC_CPU_WATCHPOINTS_NUM=2 +CONFIG_SOC_CPU_WATCHPOINT_SIZE=64 +CONFIG_SOC_DAC_CHAN_NUM=2 +CONFIG_SOC_DAC_RESOLUTION=8 +CONFIG_SOC_DAC_DMA_16BIT_ALIGN=y +CONFIG_SOC_GPIO_PORT=1 +CONFIG_SOC_GPIO_PIN_COUNT=40 +CONFIG_SOC_GPIO_VALID_GPIO_MASK=0xFFFFFFFFFF +CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0xEF0FEA +CONFIG_SOC_I2C_NUM=2 +CONFIG_SOC_I2C_FIFO_LEN=32 +CONFIG_SOC_I2C_CMD_REG_NUM=16 +CONFIG_SOC_I2C_SUPPORT_SLAVE=y +CONFIG_SOC_I2C_SUPPORT_APB=y +CONFIG_SOC_I2S_NUM=2 +CONFIG_SOC_I2S_HW_VERSION_1=y +CONFIG_SOC_I2S_SUPPORTS_APLL=y +CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y +CONFIG_SOC_I2S_SUPPORTS_PDM=y +CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y +CONFIG_SOC_I2S_PDM_MAX_TX_LINES=1 +CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y +CONFIG_SOC_I2S_PDM_MAX_RX_LINES=1 +CONFIG_SOC_I2S_SUPPORTS_ADC_DAC=y +CONFIG_SOC_I2S_SUPPORTS_ADC=y +CONFIG_SOC_I2S_SUPPORTS_DAC=y +CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA=y +CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD=y +CONFIG_SOC_I2S_LCD_I80_VARIANT=y +CONFIG_SOC_LCD_I80_SUPPORTED=y +CONFIG_SOC_LCD_I80_BUSES=2 +CONFIG_SOC_LCD_I80_BUS_WIDTH=24 +CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX=y +CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y +CONFIG_SOC_LEDC_SUPPORT_REF_TICK=y +CONFIG_SOC_LEDC_SUPPORT_HS_MODE=y +CONFIG_SOC_LEDC_CHANNEL_NUM=8 +CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=20 +CONFIG_SOC_MCPWM_GROUPS=2 +CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3 +CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3 +CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2 +CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3 +CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y +CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3 +CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3 +CONFIG_SOC_MMU_PERIPH_NUM=2 +CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=3 +CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000 +CONFIG_SOC_MPU_REGIONS_MAX_NUM=8 +CONFIG_SOC_PCNT_GROUPS=1 +CONFIG_SOC_PCNT_UNITS_PER_GROUP=8 +CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2 +CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2 +CONFIG_SOC_RMT_GROUPS=1 +CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=8 +CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=8 +CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8 +CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=64 +CONFIG_SOC_RMT_SUPPORT_REF_TICK=y +CONFIG_SOC_RMT_SUPPORT_APB=y +CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT=y +CONFIG_SOC_RTCIO_PIN_COUNT=18 +CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y +CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y +CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y +CONFIG_SOC_SDM_GROUPS=1 +CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8 +CONFIG_SOC_SDM_CLK_SUPPORT_APB=y +CONFIG_SOC_SPI_HD_BOTH_INOUT_SUPPORTED=y +CONFIG_SOC_SPI_AS_CS_SUPPORTED=y +CONFIG_SOC_SPI_PERIPH_NUM=3 +CONFIG_SOC_SPI_DMA_CHAN_NUM=2 +CONFIG_SOC_SPI_MAX_CS_NUM=3 +CONFIG_SOC_SPI_SUPPORT_CLK_APB=y +CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64 +CONFIG_SOC_SPI_MAX_PRE_DIVIDER=8192 +CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y +CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y +CONFIG_SOC_TIMER_GROUPS=2 +CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2 +CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=64 +CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4 +CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y +CONFIG_SOC_TOUCH_VERSION_1=y +CONFIG_SOC_TOUCH_SENSOR_NUM=10 +CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX=0xFF +CONFIG_SOC_TWAI_CONTROLLER_NUM=1 +CONFIG_SOC_TWAI_BRP_MIN=2 +CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y +CONFIG_SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT=y +CONFIG_SOC_UART_NUM=3 +CONFIG_SOC_UART_SUPPORT_APB_CLK=y +CONFIG_SOC_UART_SUPPORT_REF_TICK=y +CONFIG_SOC_UART_FIFO_LEN=128 +CONFIG_SOC_UART_BITRATE_MAX=5000000 +CONFIG_SOC_SPIRAM_SUPPORTED=y +CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y +CONFIG_SOC_SHA_SUPPORT_PARALLEL_ENG=y +CONFIG_SOC_SHA_SUPPORT_SHA1=y +CONFIG_SOC_SHA_SUPPORT_SHA256=y +CONFIG_SOC_SHA_SUPPORT_SHA384=y +CONFIG_SOC_SHA_SUPPORT_SHA512=y +CONFIG_SOC_RSA_MAX_BIT_LEN=4096 +CONFIG_SOC_AES_SUPPORT_AES_128=y +CONFIG_SOC_AES_SUPPORT_AES_192=y +CONFIG_SOC_AES_SUPPORT_AES_256=y +CONFIG_SOC_SECURE_BOOT_V1=y +CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=y +CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32 +CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21 +CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y +CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y +CONFIG_SOC_PM_SUPPORT_RTC_FAST_MEM_PD=y +CONFIG_SOC_PM_SUPPORT_RTC_SLOW_MEM_PD=y +CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y +CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y +CONFIG_SOC_PM_SUPPORT_MODEM_PD=y +CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y +CONFIG_SOC_CLK_APLL_SUPPORTED=y +CONFIG_SOC_APLL_MULTIPLIER_OUT_MIN_HZ=350000000 +CONFIG_SOC_APLL_MULTIPLIER_OUT_MAX_HZ=500000000 +CONFIG_SOC_APLL_MIN_HZ=5303031 +CONFIG_SOC_APLL_MAX_HZ=125000000 +CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y +CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y +CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y +CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y +CONFIG_SOC_SDMMC_USE_IOMUX=y +CONFIG_SOC_SDMMC_NUM_SLOTS=2 +CONFIG_SOC_WIFI_WAPI_SUPPORT=y +CONFIG_SOC_WIFI_CSI_SUPPORT=y +CONFIG_SOC_WIFI_MESH_SUPPORT=y +CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y +CONFIG_SOC_WIFI_NAN_SUPPORT=y +CONFIG_SOC_BLE_SUPPORTED=y +CONFIG_SOC_BLE_MESH_SUPPORTED=y +CONFIG_SOC_BT_CLASSIC_SUPPORTED=y +CONFIG_SOC_BLUFI_SUPPORTED=y +CONFIG_SOC_ULP_HAS_ADC=y +CONFIG_IDF_CMAKE=y +CONFIG_IDF_TARGET_ARCH_XTENSA=y +CONFIG_IDF_TARGET_ARCH="xtensa" +CONFIG_IDF_TARGET="esp32" +CONFIG_IDF_TARGET_ESP32=y +CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000 + +# +# Build type +# +CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y +# CONFIG_APP_BUILD_TYPE_RAM is not set +CONFIG_APP_BUILD_GENERATE_BINARIES=y +CONFIG_APP_BUILD_BOOTLOADER=y +CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y +# CONFIG_APP_REPRODUCIBLE_BUILD is not set +# CONFIG_APP_NO_BLOBS is not set +# CONFIG_APP_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set +# CONFIG_APP_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set +# end of Build type + +# +# Bootloader config +# +CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000 +CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set +CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y +# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set +# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set +CONFIG_BOOTLOADER_LOG_LEVEL=3 +# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set +CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y +# CONFIG_BOOTLOADER_FACTORY_RESET is not set +# CONFIG_BOOTLOADER_APP_TEST is not set +CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y +CONFIG_BOOTLOADER_WDT_ENABLE=y +# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set +CONFIG_BOOTLOADER_WDT_TIME_MS=9000 +# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set +# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set +CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 +# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set +CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y +# end of Bootloader config + +# +# Security features +# +CONFIG_SECURE_BOOT_V1_SUPPORTED=y +# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set +# CONFIG_SECURE_BOOT is not set +# CONFIG_SECURE_FLASH_ENC_ENABLED is not set +# end of Security features + +# +# Application manager +# +CONFIG_APP_COMPILE_TIME_DATE=y +# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set +# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set +# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set +CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 +# end of Application manager + +CONFIG_ESP_ROM_HAS_CRC_LE=y +CONFIG_ESP_ROM_HAS_CRC_BE=y +CONFIG_ESP_ROM_HAS_MZ_CRC32=y +CONFIG_ESP_ROM_HAS_JPEG_DECODE=y +CONFIG_ESP_ROM_HAS_UART_BUF_SWITCH=y +CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y +CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y + +# +# Serial flasher config +# +# CONFIG_ESPTOOLPY_NO_STUB is not set +# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set +# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set +CONFIG_ESPTOOLPY_FLASHMODE_DIO=y +# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set +CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y +CONFIG_ESPTOOLPY_FLASHMODE="dio" +# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set +CONFIG_ESPTOOLPY_FLASHFREQ_40M=y +# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set +# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set +CONFIG_ESPTOOLPY_FLASHFREQ="40m" +# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y +# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set +# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set +CONFIG_ESPTOOLPY_FLASHSIZE="2MB" +# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set +CONFIG_ESPTOOLPY_BEFORE_RESET=y +# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set +CONFIG_ESPTOOLPY_BEFORE="default_reset" +CONFIG_ESPTOOLPY_AFTER_RESET=y +# CONFIG_ESPTOOLPY_AFTER_NORESET is not set +CONFIG_ESPTOOLPY_AFTER="hard_reset" +CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 +# end of Serial flasher config + +# +# Partition Table +# +CONFIG_PARTITION_TABLE_SINGLE_APP=y +# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set +# CONFIG_PARTITION_TABLE_TWO_OTA is not set +# CONFIG_PARTITION_TABLE_CUSTOM is not set +CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" +CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv" +CONFIG_PARTITION_TABLE_OFFSET=0x8000 +CONFIG_PARTITION_TABLE_MD5=y +# end of Partition Table + +# +# Compiler options +# +CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y +# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set +# CONFIG_COMPILER_OPTIMIZATION_PERF is not set +# CONFIG_COMPILER_OPTIMIZATION_NONE is not set +CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set +CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y +CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set +CONFIG_COMPILER_HIDE_PATHS_MACROS=y +# CONFIG_COMPILER_CXX_EXCEPTIONS is not set +# CONFIG_COMPILER_CXX_RTTI is not set +CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y +# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set +# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set +# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set +# CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set +# CONFIG_COMPILER_DUMP_RTL_FILES is not set +# end of Compiler options + +# +# Component config +# + +# +# Application Level Tracing +# +# CONFIG_APPTRACE_DEST_JTAG is not set +CONFIG_APPTRACE_DEST_NONE=y +# CONFIG_APPTRACE_DEST_UART1 is not set +# CONFIG_APPTRACE_DEST_UART2 is not set +CONFIG_APPTRACE_DEST_UART_NONE=y +CONFIG_APPTRACE_UART_TASK_PRIO=1 +CONFIG_APPTRACE_LOCK_ENABLE=y +# end of Application Level Tracing + +# +# Bluetooth +# +# CONFIG_BT_ENABLED is not set +# end of Bluetooth + +# +# Driver Configurations +# + +# +# Legacy ADC Configuration +# +CONFIG_ADC_DISABLE_DAC=y +# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set + +# +# Legacy ADC Calibration Configuration +# +CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y +CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y +CONFIG_ADC_CAL_LUT_ENABLE=y +# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set +# end of Legacy ADC Calibration Configuration +# end of Legacy ADC Configuration + +# +# SPI Configuration +# +# CONFIG_SPI_MASTER_IN_IRAM is not set +CONFIG_SPI_MASTER_ISR_IN_IRAM=y +# CONFIG_SPI_SLAVE_IN_IRAM is not set +CONFIG_SPI_SLAVE_ISR_IN_IRAM=y +# end of SPI Configuration + +# +# TWAI Configuration +# +# CONFIG_TWAI_ISR_IN_IRAM is not set +CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC=y +CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST=y +CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID=y +CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT=y +CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y +# end of TWAI Configuration + +# +# UART Configuration +# +# CONFIG_UART_ISR_IN_IRAM is not set +# end of UART Configuration + +# +# GPIO Configuration +# +# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set +# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set +# end of GPIO Configuration + +# +# Sigma Delta Modulator Configuration +# +# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set +# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_SDM_ENABLE_DEBUG_LOG is not set +# end of Sigma Delta Modulator Configuration + +# +# GPTimer Configuration +# +# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set +# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set +# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set +# end of GPTimer Configuration + +# +# PCNT Configuration +# +# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set +# CONFIG_PCNT_ISR_IRAM_SAFE is not set +# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set +# end of PCNT Configuration + +# +# RMT Configuration +# +# CONFIG_RMT_ISR_IRAM_SAFE is not set +# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_RMT_ENABLE_DEBUG_LOG is not set +# end of RMT Configuration + +# +# MCPWM Configuration +# +# CONFIG_MCPWM_ISR_IRAM_SAFE is not set +# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set +# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set +# end of MCPWM Configuration + +# +# I2S Configuration +# +# CONFIG_I2S_ISR_IRAM_SAFE is not set +# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_I2S_ENABLE_DEBUG_LOG is not set +# end of I2S Configuration + +# +# DAC Configuration +# +# CONFIG_DAC_CTRL_FUNC_IN_IRAM is not set +# CONFIG_DAC_ISR_IRAM_SAFE is not set +# CONFIG_DAC_SUPPRESS_DEPRECATE_WARN is not set +# CONFIG_DAC_ENABLE_DEBUG_LOG is not set +CONFIG_DAC_DMA_AUTO_16BIT_ALIGN=y +# end of DAC Configuration +# end of Driver Configurations + +# +# eFuse Bit Manager +# +# CONFIG_EFUSE_CUSTOM_TABLE is not set +# CONFIG_EFUSE_VIRTUAL is not set +# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set +CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y +# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set +CONFIG_EFUSE_MAX_BLK_LEN=192 +# end of eFuse Bit Manager + +# +# ESP-TLS +# +CONFIG_ESP_TLS_USING_MBEDTLS=y +# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set +# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set +# CONFIG_ESP_TLS_SERVER is not set +# CONFIG_ESP_TLS_PSK_VERIFICATION is not set +# CONFIG_ESP_TLS_INSECURE is not set +# end of ESP-TLS + +# +# ADC and ADC Calibration +# +# CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set +# CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set + +# +# ADC Calibration Configurations +# +CONFIG_ADC_CALI_EFUSE_TP_ENABLE=y +CONFIG_ADC_CALI_EFUSE_VREF_ENABLE=y +CONFIG_ADC_CALI_LUT_ENABLE=y +# end of ADC Calibration Configurations + +CONFIG_ADC_DISABLE_DAC_OUTPUT=y +# end of ADC and ADC Calibration + +# +# Wireless Coexistence +# +# end of Wireless Coexistence + +# +# Common ESP-related +# +CONFIG_ESP_ERR_TO_NAME_LOOKUP=y +# end of Common ESP-related + +# +# Ethernet +# +CONFIG_ETH_ENABLED=y +CONFIG_ETH_USE_ESP32_EMAC=y +CONFIG_ETH_PHY_INTERFACE_RMII=y +CONFIG_ETH_RMII_CLK_INPUT=y +# CONFIG_ETH_RMII_CLK_OUTPUT is not set +CONFIG_ETH_RMII_CLK_IN_GPIO=0 +CONFIG_ETH_DMA_BUFFER_SIZE=512 +CONFIG_ETH_DMA_RX_BUFFER_NUM=10 +CONFIG_ETH_DMA_TX_BUFFER_NUM=10 +CONFIG_ETH_USE_SPI_ETHERNET=y +# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set +# CONFIG_ETH_SPI_ETHERNET_W5500 is not set +# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set +# CONFIG_ETH_USE_OPENETH is not set +# CONFIG_ETH_TRANSMIT_MUTEX is not set +# end of Ethernet + +# +# Event Loop Library +# +# CONFIG_ESP_EVENT_LOOP_PROFILING is not set +CONFIG_ESP_EVENT_POST_FROM_ISR=y +CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y +# end of Event Loop Library + +# +# GDB Stub +# +# end of GDB Stub + +# +# ESP HTTP client +# +CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y +# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set +# CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set +# end of ESP HTTP client + +# +# HTTP Server +# +CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 +CONFIG_HTTPD_MAX_URI_LEN=512 +CONFIG_HTTPD_ERR_RESP_NO_DELAY=y +CONFIG_HTTPD_PURGE_BUF_LEN=32 +# CONFIG_HTTPD_LOG_PURGE_DATA is not set +# CONFIG_HTTPD_WS_SUPPORT is not set +# CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set +# end of HTTP Server + +# +# ESP HTTPS OTA +# +# CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set +# CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set +# end of ESP HTTPS OTA + +# +# ESP HTTPS server +# +# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set +# end of ESP HTTPS server + +# +# Hardware Settings +# + +# +# Chip revision +# +CONFIG_ESP32_REV_MIN_0=y +# CONFIG_ESP32_REV_MIN_1 is not set +# CONFIG_ESP32_REV_MIN_1_1 is not set +# CONFIG_ESP32_REV_MIN_2 is not set +# CONFIG_ESP32_REV_MIN_3 is not set +# CONFIG_ESP32_REV_MIN_3_1 is not set +CONFIG_ESP32_REV_MIN=0 +CONFIG_ESP32_REV_MIN_FULL=0 +CONFIG_ESP_REV_MIN_FULL=0 + +# +# Maximum Supported ESP32 Revision (Rev v3.99) +# +CONFIG_ESP32_REV_MAX_FULL=399 +CONFIG_ESP_REV_MAX_FULL=399 +# end of Chip revision + +# +# MAC Config +# +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y +CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y +CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y +# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set +CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y +CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 +# CONFIG_ESP_MAC_IGNORE_MAC_CRC_ERROR is not set +# end of MAC Config + +# +# Sleep Config +# +# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set +CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y +# CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU is not set +CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y +# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set +CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000 +# end of Sleep Config + +# +# RTC Clock Config +# +CONFIG_RTC_CLK_SRC_INT_RC=y +# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set +CONFIG_RTC_CLK_CAL_CYCLES=1024 +# end of RTC Clock Config + +# +# Peripheral Control +# +CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y +# end of Peripheral Control + +# +# Main XTAL Config +# +# CONFIG_XTAL_FREQ_26 is not set +CONFIG_XTAL_FREQ_40=y +# CONFIG_XTAL_FREQ_AUTO is not set +CONFIG_XTAL_FREQ=40 +# end of Main XTAL Config +# end of Hardware Settings + +# +# LCD and Touch Panel +# + +# +# LCD Touch Drivers are maintained in the IDF Component Registry +# + +# +# LCD Peripheral Configuration +# +CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 +# CONFIG_LCD_ENABLE_DEBUG_LOG is not set +# end of LCD Peripheral Configuration +# end of LCD and Touch Panel + +# +# ESP NETIF Adapter +# +CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 +CONFIG_ESP_NETIF_TCPIP_LWIP=y +# CONFIG_ESP_NETIF_LOOPBACK is not set +CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y +# CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set +# CONFIG_ESP_NETIF_L2_TAP is not set +# CONFIG_ESP_NETIF_BRIDGE_EN is not set +# end of ESP NETIF Adapter + +# +# Partition API Configuration +# +# end of Partition API Configuration + +# +# PHY +# +CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP_PHY_MAX_TX_POWER=20 +# CONFIG_ESP_PHY_REDUCE_TX_POWER is not set +CONFIG_ESP_PHY_RF_CAL_PARTIAL=y +# CONFIG_ESP_PHY_RF_CAL_NONE is not set +# CONFIG_ESP_PHY_RF_CAL_FULL is not set +CONFIG_ESP_PHY_CALIBRATION_MODE=0 +# end of PHY + +# +# Power Management +# +# CONFIG_PM_ENABLE is not set +# end of Power Management + +# +# ESP PSRAM +# +# CONFIG_SPIRAM is not set +# end of ESP PSRAM + +# +# ESP Ringbuf +# +# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set +# end of ESP Ringbuf + +# +# ESP System Settings +# +# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set +CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y +# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240 is not set +CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160 + +# +# Memory +# +# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set + +# +# Non-backward compatible options +# +# CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM is not set +# end of Non-backward compatible options +# end of Memory + +# +# Trace memory +# +# CONFIG_ESP32_TRAX is not set +CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0 +# end of Trace memory + +# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set +CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y +# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set +# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set +CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0 + +# +# Memory protection +# +# end of Memory protection + +CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 +CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y +# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set +# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set +CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 +CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 +CONFIG_ESP_CONSOLE_UART_DEFAULT=y +# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set +# CONFIG_ESP_CONSOLE_NONE is not set +CONFIG_ESP_CONSOLE_UART=y +CONFIG_ESP_CONSOLE_MULTIPLE_UART=y +CONFIG_ESP_CONSOLE_UART_NUM=0 +CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 +CONFIG_ESP_INT_WDT=y +CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 +CONFIG_ESP_INT_WDT_CHECK_CPU1=y +CONFIG_ESP_TASK_WDT_EN=y +CONFIG_ESP_TASK_WDT_INIT=y +# CONFIG_ESP_TASK_WDT_PANIC is not set +CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP_PANIC_HANDLER_IRAM is not set +# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set +CONFIG_ESP_DEBUG_OCDAWARE=y +# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set +CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y + +# +# Brownout Detector +# +CONFIG_ESP_BROWNOUT_DET=y +CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0=y +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 is not set +CONFIG_ESP_BROWNOUT_DET_LVL=0 +# end of Brownout Detector + +# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set +CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y +# end of ESP System Settings + +# +# IPC (Inter-Processor Call) +# +CONFIG_ESP_IPC_TASK_STACK_SIZE=1024 +CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y +CONFIG_ESP_IPC_ISR_ENABLE=y +# end of IPC (Inter-Processor Call) + +# +# High resolution timer (esp_timer) +# +# CONFIG_ESP_TIMER_PROFILING is not set +CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y +CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y +CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 +# CONFIG_ESP_TIMER_SHOW_EXPERIMENTAL is not set +CONFIG_ESP_TIMER_TASK_AFFINITY=0x0 +CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0=y +CONFIG_ESP_TIMER_ISR_AFFINITY=0x1 +CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0=y +# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set +CONFIG_ESP_TIMER_IMPL_TG0_LAC=y +# end of High resolution timer (esp_timer) + +# +# Wi-Fi +# +CONFIG_ESP_WIFI_ENABLED=y +CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10 +CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +# CONFIG_ESP_WIFI_STATIC_TX_BUFFER is not set +CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER=y +CONFIG_ESP_WIFI_TX_BUFFER_TYPE=1 +CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=32 +# CONFIG_ESP_WIFI_CSI_ENABLED is not set +CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y +CONFIG_ESP_WIFI_TX_BA_WIN=6 +CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP_WIFI_RX_BA_WIN=6 +CONFIG_ESP_WIFI_NVS_ENABLED=y +CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y +# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set +CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752 +CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32 +CONFIG_ESP_WIFI_IRAM_OPT=y +CONFIG_ESP_WIFI_RX_IRAM_OPT=y +CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=y +CONFIG_ESP_WIFI_ENABLE_SAE_PK=y +CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT=y +CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=y +# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set +CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=y +# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set +CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y +# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set +CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7 +# CONFIG_ESP_WIFI_NAN_ENABLE is not set +CONFIG_ESP_WIFI_MBEDTLS_CRYPTO=y +CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT=y +# CONFIG_ESP_WIFI_WAPI_PSK is not set +# CONFIG_ESP_WIFI_SUITE_B_192 is not set +# CONFIG_ESP_WIFI_11KV_SUPPORT is not set +# CONFIG_ESP_WIFI_MBO_SUPPORT is not set +# CONFIG_ESP_WIFI_DPP_SUPPORT is not set +# CONFIG_ESP_WIFI_11R_SUPPORT is not set +# CONFIG_ESP_WIFI_WPS_SOFTAP_REGISTRAR is not set + +# +# WPS Configuration Options +# +# CONFIG_ESP_WIFI_WPS_STRICT is not set +# CONFIG_ESP_WIFI_WPS_PASSPHRASE is not set +# end of WPS Configuration Options + +# CONFIG_ESP_WIFI_DEBUG_PRINT is not set +# CONFIG_ESP_WIFI_TESTING_OPTIONS is not set +# end of Wi-Fi + +# +# Core dump +# +# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set +# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set +CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y +# end of Core dump + +# +# FAT Filesystem support +# +CONFIG_FATFS_VOLUME_COUNT=2 +CONFIG_FATFS_LFN_NONE=y +# CONFIG_FATFS_LFN_HEAP is not set +# CONFIG_FATFS_LFN_STACK is not set +# CONFIG_FATFS_SECTOR_512 is not set +CONFIG_FATFS_SECTOR_4096=y +# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set +CONFIG_FATFS_CODEPAGE_437=y +# CONFIG_FATFS_CODEPAGE_720 is not set +# CONFIG_FATFS_CODEPAGE_737 is not set +# CONFIG_FATFS_CODEPAGE_771 is not set +# CONFIG_FATFS_CODEPAGE_775 is not set +# CONFIG_FATFS_CODEPAGE_850 is not set +# CONFIG_FATFS_CODEPAGE_852 is not set +# CONFIG_FATFS_CODEPAGE_855 is not set +# CONFIG_FATFS_CODEPAGE_857 is not set +# CONFIG_FATFS_CODEPAGE_860 is not set +# CONFIG_FATFS_CODEPAGE_861 is not set +# CONFIG_FATFS_CODEPAGE_862 is not set +# CONFIG_FATFS_CODEPAGE_863 is not set +# CONFIG_FATFS_CODEPAGE_864 is not set +# CONFIG_FATFS_CODEPAGE_865 is not set +# CONFIG_FATFS_CODEPAGE_866 is not set +# CONFIG_FATFS_CODEPAGE_869 is not set +# CONFIG_FATFS_CODEPAGE_932 is not set +# CONFIG_FATFS_CODEPAGE_936 is not set +# CONFIG_FATFS_CODEPAGE_949 is not set +# CONFIG_FATFS_CODEPAGE_950 is not set +CONFIG_FATFS_CODEPAGE=437 +CONFIG_FATFS_FS_LOCK=0 +CONFIG_FATFS_TIMEOUT_MS=10000 +CONFIG_FATFS_PER_FILE_CACHE=y +# CONFIG_FATFS_USE_FASTSEEK is not set +CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0 +# end of FAT Filesystem support + +# +# FreeRTOS +# + +# +# Kernel +# +# CONFIG_FREERTOS_SMP is not set +# CONFIG_FREERTOS_UNICORE is not set +CONFIG_FREERTOS_HZ=100 +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set +# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set +CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y +CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 +CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 +# CONFIG_FREERTOS_USE_IDLE_HOOK is not set +# CONFIG_FREERTOS_USE_TICK_HOOK is not set +CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 +# CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set +CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 +CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 +CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 +CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1 +# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set +# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set +# end of Kernel + +# +# Port +# +CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y +# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set +CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y +# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set +CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y +CONFIG_FREERTOS_ISR_STACKSIZE=1536 +CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y +# CONFIG_FREERTOS_FPU_IN_ISR is not set +CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y +CONFIG_FREERTOS_CORETIMER_0=y +# CONFIG_FREERTOS_CORETIMER_1 is not set +CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y +# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set +# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set +# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set +CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y +# end of Port + +CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF +CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y +CONFIG_FREERTOS_DEBUG_OCDAWARE=y +# end of FreeRTOS + +# +# Hardware Abstraction Layer (HAL) and Low Level (LL) +# +CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y +# CONFIG_HAL_ASSERTION_DISABLE is not set +# CONFIG_HAL_ASSERTION_SILENT is not set +# CONFIG_HAL_ASSERTION_ENABLE is not set +CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 +CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y +CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y +# end of Hardware Abstraction Layer (HAL) and Low Level (LL) + +# +# Heap memory debugging +# +CONFIG_HEAP_POISONING_DISABLED=y +# CONFIG_HEAP_POISONING_LIGHT is not set +# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set +CONFIG_HEAP_TRACING_OFF=y +# CONFIG_HEAP_TRACING_STANDALONE is not set +# CONFIG_HEAP_TRACING_TOHOST is not set +# CONFIG_HEAP_USE_HOOKS is not set +# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set +# CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH is not set +# end of Heap memory debugging + +CONFIG_IEEE802154_CCA_THRESHOLD=-60 +CONFIG_IEEE802154_PENDING_TABLE_SIZE=20 + +# +# Log output +# +# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set +# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set +# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set +CONFIG_LOG_DEFAULT_LEVEL_INFO=y +# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set +# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set +CONFIG_LOG_DEFAULT_LEVEL=3 +CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y +# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set +# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set +CONFIG_LOG_MAXIMUM_LEVEL=3 +CONFIG_LOG_COLORS=y +CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y +# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set +# end of Log output + +# +# LWIP +# +CONFIG_LWIP_LOCAL_HOSTNAME="espressif" +# CONFIG_LWIP_NETIF_API is not set +# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set +# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set +CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y +# CONFIG_LWIP_L2_TO_L3_COPY is not set +# CONFIG_LWIP_IRAM_OPTIMIZATION is not set +CONFIG_LWIP_TIMERS_ONDEMAND=y +CONFIG_LWIP_MAX_SOCKETS=10 +# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set +# CONFIG_LWIP_SO_LINGER is not set +CONFIG_LWIP_SO_REUSE=y +CONFIG_LWIP_SO_REUSE_RXTOALL=y +# CONFIG_LWIP_SO_RCVBUF is not set +# CONFIG_LWIP_NETBUF_RECVINFO is not set +CONFIG_LWIP_IP4_FRAG=y +CONFIG_LWIP_IP6_FRAG=y +# CONFIG_LWIP_IP4_REASSEMBLY is not set +# CONFIG_LWIP_IP6_REASSEMBLY is not set +CONFIG_LWIP_IP_REASS_MAX_PBUFS=10 +# CONFIG_LWIP_IP_FORWARD is not set +# CONFIG_LWIP_STATS is not set +CONFIG_LWIP_ESP_GRATUITOUS_ARP=y +CONFIG_LWIP_GARP_TMR_INTERVAL=60 +CONFIG_LWIP_ESP_MLDV6_REPORT=y +CONFIG_LWIP_MLDV6_TMR_INTERVAL=40 +CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 +CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y +# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set +CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y +# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set +CONFIG_LWIP_DHCP_OPTIONS_LEN=68 +CONFIG_LWIP_NUM_NETIF_CLIENT_DATA=0 +CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1 + +# +# DHCP server +# +CONFIG_LWIP_DHCPS=y +CONFIG_LWIP_DHCPS_LEASE_UNIT=60 +CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 +# end of DHCP server + +# CONFIG_LWIP_AUTOIP is not set +CONFIG_LWIP_IPV4=y +CONFIG_LWIP_IPV6=y +# CONFIG_LWIP_IPV6_AUTOCONFIG is not set +CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 +# CONFIG_LWIP_IPV6_FORWARD is not set +# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set +CONFIG_LWIP_NETIF_LOOPBACK=y +CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 + +# +# TCP +# +CONFIG_LWIP_MAX_ACTIVE_TCP=16 +CONFIG_LWIP_MAX_LISTENING_TCP=16 +CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y +CONFIG_LWIP_TCP_MAXRTX=12 +CONFIG_LWIP_TCP_SYNMAXRTX=12 +CONFIG_LWIP_TCP_MSS=1440 +CONFIG_LWIP_TCP_TMR_INTERVAL=250 +CONFIG_LWIP_TCP_MSL=60000 +CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000 +CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 +CONFIG_LWIP_TCP_WND_DEFAULT=5744 +CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 +CONFIG_LWIP_TCP_QUEUE_OOSEQ=y +# CONFIG_LWIP_TCP_SACK_OUT is not set +CONFIG_LWIP_TCP_OVERSIZE_MSS=y +# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set +CONFIG_LWIP_TCP_RTO_TIME=1500 +# end of TCP + +# +# UDP +# +CONFIG_LWIP_MAX_UDP_PCBS=16 +CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 +# end of UDP + +# +# Checksums +# +# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set +# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set +CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y +# end of Checksums + +CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set +# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set +CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_LWIP_PPP_SUPPORT is not set +CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 +CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 +# CONFIG_LWIP_SLIP_SUPPORT is not set + +# +# ICMP +# +CONFIG_LWIP_ICMP=y +# CONFIG_LWIP_MULTICAST_PING is not set +# CONFIG_LWIP_BROADCAST_PING is not set +# end of ICMP + +# +# LWIP RAW API +# +CONFIG_LWIP_MAX_RAW_PCBS=16 +# end of LWIP RAW API + +# +# SNTP +# +CONFIG_LWIP_SNTP_MAX_SERVERS=1 +# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set +CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 +# end of SNTP + +CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7 +CONFIG_LWIP_ESP_LWIP_ASSERT=y + +# +# Hooks +# +# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set +CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y +# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y +# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set +CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y +# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set +# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y +# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM is not set +CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set +# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set +CONFIG_LWIP_HOOK_IP6_INPUT_NONE=y +# CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT is not set +# CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set +# end of Hooks + +# CONFIG_LWIP_DEBUG is not set +# end of LWIP + +# +# mbedTLS +# +CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y +# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set +# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set +CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y +CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 +CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 +# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set +# CONFIG_MBEDTLS_DEBUG is not set + +# +# mbedTLS v3.x related +# +# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set +# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set +# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set +# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set +CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y +CONFIG_MBEDTLS_PKCS7_C=y +# end of mbedTLS v3.x related + +# +# Certificate Bundle +# +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set +# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set +# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set +CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200 +# end of Certificate Bundle + +# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set +# CONFIG_MBEDTLS_CMAC_C is not set +CONFIG_MBEDTLS_HARDWARE_AES=y +CONFIG_MBEDTLS_HARDWARE_MPI=y +CONFIG_MBEDTLS_HARDWARE_SHA=y +CONFIG_MBEDTLS_ROM_MD5=y +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set +# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set +CONFIG_MBEDTLS_HAVE_TIME=y +# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set +# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set +CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y +CONFIG_MBEDTLS_SHA512_C=y +CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y +# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set +# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set +# CONFIG_MBEDTLS_TLS_DISABLED is not set +CONFIG_MBEDTLS_TLS_SERVER=y +CONFIG_MBEDTLS_TLS_CLIENT=y +CONFIG_MBEDTLS_TLS_ENABLED=y + +# +# TLS Key Exchange Methods +# +# CONFIG_MBEDTLS_PSK_MODES is not set +CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y +CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y +# end of TLS Key Exchange Methods + +CONFIG_MBEDTLS_SSL_RENEGOTIATION=y +CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y +# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set +# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set +CONFIG_MBEDTLS_SSL_ALPN=y +CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y +CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y + +# +# Symmetric Ciphers +# +CONFIG_MBEDTLS_AES_C=y +# CONFIG_MBEDTLS_CAMELLIA_C is not set +# CONFIG_MBEDTLS_DES_C is not set +# CONFIG_MBEDTLS_BLOWFISH_C is not set +# CONFIG_MBEDTLS_XTEA_C is not set +CONFIG_MBEDTLS_CCM_C=y +CONFIG_MBEDTLS_GCM_C=y +# CONFIG_MBEDTLS_NIST_KW_C is not set +# end of Symmetric Ciphers + +# CONFIG_MBEDTLS_RIPEMD160_C is not set + +# +# Certificates +# +CONFIG_MBEDTLS_PEM_PARSE_C=y +CONFIG_MBEDTLS_PEM_WRITE_C=y +CONFIG_MBEDTLS_X509_CRL_PARSE_C=y +CONFIG_MBEDTLS_X509_CSR_PARSE_C=y +# end of Certificates + +CONFIG_MBEDTLS_ECP_C=y +# CONFIG_MBEDTLS_DHM_C is not set +CONFIG_MBEDTLS_ECDH_C=y +CONFIG_MBEDTLS_ECDSA_C=y +# CONFIG_MBEDTLS_ECJPAKE_C is not set +CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y +CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y +CONFIG_MBEDTLS_ECP_NIST_OPTIM=y +# CONFIG_MBEDTLS_POLY1305_C is not set +# CONFIG_MBEDTLS_CHACHA20_C is not set +# CONFIG_MBEDTLS_HKDF_C is not set +# CONFIG_MBEDTLS_THREADING_C is not set +# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set +# CONFIG_MBEDTLS_SECURITY_RISKS is not set +# end of mbedTLS + +# +# ESP-MQTT Configurations +# +CONFIG_MQTT_PROTOCOL_311=y +# CONFIG_MQTT_PROTOCOL_5 is not set +CONFIG_MQTT_TRANSPORT_SSL=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET=y +CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y +# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set +# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set +# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set +# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set +# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set +# CONFIG_MQTT_CUSTOM_OUTBOX is not set +# end of ESP-MQTT Configurations + +# +# Newlib +# +CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set +# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set +# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set +CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y +# CONFIG_NEWLIB_NANO_FORMAT is not set +CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y +# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set +# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set +# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set +# end of Newlib + +# +# NVS +# +# CONFIG_NVS_ASSERT_ERROR_CHECK is not set +# end of NVS + +# +# OpenThread +# +# CONFIG_OPENTHREAD_ENABLED is not set + +# +# Thread Operational Dataset +# +CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP" +CONFIG_OPENTHREAD_NETWORK_CHANNEL=15 +CONFIG_OPENTHREAD_NETWORK_PANID=0x1234 +CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe" +CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff" +CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53" +# end of Thread Operational Dataset +# end of OpenThread + +# +# Protocomm +# +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y +CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y +# end of Protocomm + +# +# PThreads +# +CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_PTHREAD_STACK_MIN=768 +CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y +# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set +# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set +CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" +# end of PThreads + +# +# MMU Config +# +CONFIG_MMU_PAGE_SIZE_64KB=y +CONFIG_MMU_PAGE_MODE="64KB" +CONFIG_MMU_PAGE_SIZE=0x10000 +# end of MMU Config + +# +# SPI Flash driver +# +# CONFIG_SPI_FLASH_VERIFY_WRITE is not set +# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set +CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y +CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set +# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set +# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set +# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set +CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y +CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 +CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 +CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 +# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set +# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set +# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set + +# +# SPI Flash behavior when brownout +# +CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y +CONFIG_SPI_FLASH_BROWNOUT_RESET=y +# end of SPI Flash behavior when brownout + +# +# Auto-detect flash chips +# +CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED=y +CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED=y +CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y +CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y +# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set +# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set +# end of Auto-detect flash chips + +CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y +# end of SPI Flash driver + +# +# SPIFFS Configuration +# +CONFIG_SPIFFS_MAX_PARTITIONS=3 + +# +# SPIFFS Cache Configuration +# +CONFIG_SPIFFS_CACHE=y +CONFIG_SPIFFS_CACHE_WR=y +# CONFIG_SPIFFS_CACHE_STATS is not set +# end of SPIFFS Cache Configuration + +CONFIG_SPIFFS_PAGE_CHECK=y +CONFIG_SPIFFS_GC_MAX_RUNS=10 +# CONFIG_SPIFFS_GC_STATS is not set +CONFIG_SPIFFS_PAGE_SIZE=256 +CONFIG_SPIFFS_OBJ_NAME_LEN=32 +# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set +CONFIG_SPIFFS_USE_MAGIC=y +CONFIG_SPIFFS_USE_MAGIC_LENGTH=y +CONFIG_SPIFFS_META_LENGTH=4 +CONFIG_SPIFFS_USE_MTIME=y + +# +# Debug Configuration +# +# CONFIG_SPIFFS_DBG is not set +# CONFIG_SPIFFS_API_DBG is not set +# CONFIG_SPIFFS_GC_DBG is not set +# CONFIG_SPIFFS_CACHE_DBG is not set +# CONFIG_SPIFFS_CHECK_DBG is not set +# CONFIG_SPIFFS_TEST_VISUALISATION is not set +# end of Debug Configuration +# end of SPIFFS Configuration + +# +# TCP Transport +# + +# +# Websocket +# +CONFIG_WS_TRANSPORT=y +CONFIG_WS_BUFFER_SIZE=1024 +# CONFIG_WS_DYNAMIC_BUFFER is not set +# end of Websocket +# end of TCP Transport + +# +# Ultra Low Power (ULP) Co-processor +# +# CONFIG_ULP_COPROC_ENABLED is not set +# end of Ultra Low Power (ULP) Co-processor + +# +# Unity unit testing library +# +CONFIG_UNITY_ENABLE_FLOAT=y +CONFIG_UNITY_ENABLE_DOUBLE=y +# CONFIG_UNITY_ENABLE_64BIT is not set +# CONFIG_UNITY_ENABLE_COLOR is not set +CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y +# CONFIG_UNITY_ENABLE_FIXTURE is not set +# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set +# end of Unity unit testing library + +# +# Root Hub configuration +# +# end of Root Hub configuration + +# +# Virtual file system +# +CONFIG_VFS_SUPPORT_IO=y +CONFIG_VFS_SUPPORT_DIR=y +CONFIG_VFS_SUPPORT_SELECT=y +CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_VFS_SUPPORT_TERMIOS=y +CONFIG_VFS_MAX_COUNT=8 + +# +# Host File System I/O (Semihosting) +# +CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +# end of Host File System I/O (Semihosting) +# end of Virtual file system + +# +# Wear Levelling +# +# CONFIG_WL_SECTOR_SIZE_512 is not set +CONFIG_WL_SECTOR_SIZE_4096=y +CONFIG_WL_SECTOR_SIZE=4096 +# end of Wear Levelling + +# +# Wi-Fi Provisioning Manager +# +CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 +CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 +# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set +CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y +# CONFIG_WIFI_PROV_STA_FAST_SCAN is not set +# end of Wi-Fi Provisioning Manager + +# +# SRA Board Component Config +# + +# +# I2C +# +CONFIG_I2CDEV_TIMEOUT=1000 +# CONFIG_I2CDEV_NOLOCK is not set +# end of I2C + +# CONFIG_ENABLE_OLED is not set +CONFIG_WALL_E_LOGO_TEXT="Wall-E 2023" +CONFIG_MARIO_LOGO_TEXT="MARIO 2023" + +# +# Servo motor configuration +# + +# +# Servo A +# +CONFIG_SERVO_A_MIN_PULSEWIDTH=500 +CONFIG_SERVO_A_MAX_PULSEWIDTH=3000 +CONFIG_SERVO_A_MAX_DEGREE=180 +# end of Servo A + +# +# Servo B +# +CONFIG_SERVO_B_MIN_PULSEWIDTH=500 +CONFIG_SERVO_B_MAX_PULSEWIDTH=3000 +CONFIG_SERVO_B_MAX_DEGREE=180 +# end of Servo B + +# +# Servo C +# +CONFIG_SERVO_C_MIN_PULSEWIDTH=500 +CONFIG_SERVO_C_MAX_PULSEWIDTH=3000 +CONFIG_SERVO_C_MAX_DEGREE=180 +# end of Servo C + +# +# Servo D +# +CONFIG_SERVO_D_MIN_PULSEWIDTH=500 +CONFIG_SERVO_D_MAX_PULSEWIDTH=3000 +CONFIG_SERVO_D_MAX_DEGREE=180 +# end of Servo D +# end of Servo motor configuration + +CONFIG_NUMBER_OF_SAMPLES=64 +CONFIG_MPU_CALIBRATION_AVG_COUNT=100 +# end of SRA Board Component Config +# end of Component config + +# CONFIG_IDF_EXPERIMENTAL_FEATURES is not set + +# Deprecated options for backward compatibility +# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set +# CONFIG_NO_BLOBS is not set +# CONFIG_ESP32_NO_BLOBS is not set +# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set +# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set +CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y +# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set +# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set +CONFIG_LOG_BOOTLOADER_LEVEL=3 +# CONFIG_APP_ROLLBACK_ENABLE is not set +# CONFIG_FLASH_ENCRYPTION_ENABLED is not set +# CONFIG_FLASHMODE_QIO is not set +# CONFIG_FLASHMODE_QOUT is not set +CONFIG_FLASHMODE_DIO=y +# CONFIG_FLASHMODE_DOUT is not set +CONFIG_MONITOR_BAUD=115200 +CONFIG_OPTIMIZATION_LEVEL_DEBUG=y +CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y +# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set +# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set +CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y +# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set +# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set +CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2 +# CONFIG_CXX_EXCEPTIONS is not set +CONFIG_STACK_CHECK_NONE=y +# CONFIG_STACK_CHECK_NORM is not set +# CONFIG_STACK_CHECK_STRONG is not set +# CONFIG_STACK_CHECK_ALL is not set +# CONFIG_WARN_WRITE_STRINGS is not set +# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set +CONFIG_ESP32_APPTRACE_DEST_NONE=y +CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y +CONFIG_ADC2_DISABLE_DAC=y +# CONFIG_MCPWM_ISR_IN_IRAM is not set +# CONFIG_EVENT_LOOP_PROFILING is not set +CONFIG_POST_EVENTS_FROM_ISR=y +CONFIG_POST_EVENTS_FROM_IRAM_ISR=y +# CONFIG_OTA_ALLOW_HTTP is not set +# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set +CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y +CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4 +# CONFIG_ESP_SYSTEM_PD_FLASH is not set +CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 +CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y +CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y +# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set +# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set +# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set +# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set +# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set +# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set +CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024 +# CONFIG_ESP32_XTAL_FREQ_26 is not set +CONFIG_ESP32_XTAL_FREQ_40=y +# CONFIG_ESP32_XTAL_FREQ_AUTO is not set +CONFIG_ESP32_XTAL_FREQ=40 +CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y +# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set +CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 +CONFIG_ESP32_PHY_MAX_TX_POWER=20 +# CONFIG_REDUCE_PHY_TX_POWER is not set +# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set +# CONFIG_SPIRAM_SUPPORT is not set +# CONFIG_ESP32_SPIRAM_SUPPORT is not set +# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set +CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y +# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set +CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160 +CONFIG_TRACEMEM_RESERVE_DRAM=0x0 +# CONFIG_ESP32_PANIC_PRINT_HALT is not set +CONFIG_ESP32_PANIC_PRINT_REBOOT=y +# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set +# CONFIG_ESP32_PANIC_GDBSTUB is not set +CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 +CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 +CONFIG_MAIN_TASK_STACK_SIZE=3584 +CONFIG_CONSOLE_UART_DEFAULT=y +# CONFIG_CONSOLE_UART_CUSTOM is not set +# CONFIG_CONSOLE_UART_NONE is not set +# CONFIG_ESP_CONSOLE_UART_NONE is not set +CONFIG_CONSOLE_UART=y +CONFIG_CONSOLE_UART_NUM=0 +CONFIG_CONSOLE_UART_BAUDRATE=115200 +CONFIG_INT_WDT=y +CONFIG_INT_WDT_TIMEOUT_MS=300 +CONFIG_INT_WDT_CHECK_CPU1=y +CONFIG_TASK_WDT=y +CONFIG_ESP_TASK_WDT=y +# CONFIG_TASK_WDT_PANIC is not set +CONFIG_TASK_WDT_TIMEOUT_S=5 +CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y +CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y +# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set +CONFIG_ESP32_DEBUG_OCDAWARE=y +CONFIG_BROWNOUT_DET=y +CONFIG_ESP32_BROWNOUT_DET=y +CONFIG_BROWNOUT_DET_LVL_SEL_0=y +CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y +# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set +# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set +# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set +CONFIG_BROWNOUT_DET_LVL=0 +CONFIG_ESP32_BROWNOUT_DET_LVL=0 +# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set +CONFIG_IPC_TASK_STACK_SIZE=1024 +CONFIG_TIMER_TASK_STACK_SIZE=3584 +CONFIG_ESP32_WIFI_ENABLED=y +CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 +CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y +CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 +CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 +# CONFIG_ESP32_WIFI_CSI_ENABLED is not set +CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y +CONFIG_ESP32_WIFI_TX_BA_WIN=6 +CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y +CONFIG_ESP32_WIFI_RX_BA_WIN=6 +CONFIG_ESP32_WIFI_RX_BA_WIN=6 +CONFIG_ESP32_WIFI_NVS_ENABLED=y +CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y +# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set +CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 +CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 +CONFIG_ESP32_WIFI_IRAM_OPT=y +CONFIG_ESP32_WIFI_RX_IRAM_OPT=y +CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y +CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA=y +CONFIG_WPA_MBEDTLS_CRYPTO=y +CONFIG_WPA_MBEDTLS_TLS_CLIENT=y +# CONFIG_WPA_WAPI_PSK is not set +# CONFIG_WPA_SUITE_B_192 is not set +# CONFIG_WPA_11KV_SUPPORT is not set +# CONFIG_WPA_MBO_SUPPORT is not set +# CONFIG_WPA_DPP_SUPPORT is not set +# CONFIG_WPA_11R_SUPPORT is not set +# CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set +# CONFIG_WPA_WPS_STRICT is not set +# CONFIG_WPA_DEBUG_PRINT is not set +# CONFIG_WPA_TESTING_OPTIONS is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set +# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set +CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y +CONFIG_TIMER_TASK_PRIORITY=1 +CONFIG_TIMER_TASK_STACK_DEPTH=2048 +CONFIG_TIMER_QUEUE_LENGTH=10 +# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set +# CONFIG_HAL_ASSERTION_SILIENT is not set +# CONFIG_L2_TO_L3_COPY is not set +CONFIG_ESP_GRATUITOUS_ARP=y +CONFIG_GARP_TMR_INTERVAL=60 +CONFIG_TCPIP_RECVMBOX_SIZE=32 +CONFIG_TCP_MAXRTX=12 +CONFIG_TCP_SYNMAXRTX=12 +CONFIG_TCP_MSS=1440 +CONFIG_TCP_MSL=60000 +CONFIG_TCP_SND_BUF_DEFAULT=5744 +CONFIG_TCP_WND_DEFAULT=5744 +CONFIG_TCP_RECVMBOX_SIZE=6 +CONFIG_TCP_QUEUE_OOSEQ=y +CONFIG_TCP_OVERSIZE_MSS=y +# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set +# CONFIG_TCP_OVERSIZE_DISABLE is not set +CONFIG_UDP_RECVMBOX_SIZE=6 +CONFIG_TCPIP_TASK_STACK_SIZE=3072 +CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y +# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set +# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set +CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF +# CONFIG_PPP_SUPPORT is not set +CONFIG_ESP32_TIME_SYSCALL_USE_RTC_HRT=y +CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y +# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set +# CONFIG_ESP32_TIME_SYSCALL_USE_HRT is not set +# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set +# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set +CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 +CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 +CONFIG_ESP32_PTHREAD_STACK_MIN=768 +CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y +# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set +# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set +CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 +CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" +CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set +# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set +# CONFIG_ESP32_ULP_COPROC_ENABLED is not set +CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y +CONFIG_SUPPORT_TERMIOS=y +CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 +# End of deprecated options diff --git a/include/bar_graph.h b/include/bar_graph.h index ff8f36e..b70ddc0 100644 --- a/include/bar_graph.h +++ b/include/bar_graph.h @@ -33,7 +33,7 @@ #include "esp_log.h" #include "esp_err.h" #include "pin_defs.h" -#include "motor_driver.h" +//#include "motor_driver.h" /** * It will check for state of motor driver A, and accordingly init the free gpios. diff --git a/include/mcpwm_interface.h b/include/mcpwm_interface.h new file mode 100644 index 0000000..5b06395 --- /dev/null +++ b/include/mcpwm_interface.h @@ -0,0 +1,109 @@ +#pragma once + +#include +#include "esp_err.h" + +/** + * @brief Motor interface +*/ + +typedef struct motor_t motor_t; +typedef struct motor_t* motor_handle_t; + +struct motor_t { + /** + * @brief Enable motor + * @param motor_handle_t Motor object handle + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed + */ + esp_err_t (*enable)(motor_t *motor); + /** + * @brief Disable motor + * @param motor Motor object + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed + */ + esp_err_t (*disable)(motor_t *motor); + /** + * @brief Set motor speed + * @param motor Motor object + * @param speed Speed of motor, 0~100 + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed + */ + esp_err_t (*set_speed)(motor_t *motor, uint32_t speed); + /** + * @brief Set direction of motor to forward + * @param motor Motor object + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed + */ + esp_err_t (*forward)(motor_t *motor); + /** + * @brief Set direction of motor to backwards + * @param motor Motor object + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed + */ + esp_err_t (*backwards)(motor_t *motor); + /** + * @brief Brake motor + * @param motor Motor object + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed + */ + esp_err_t (*brake)(motor_t *motor); + /** + * @brief Delete motor object + * @param motor Motor object + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed + */ + esp_err_t (*del)(motor_t *motor); +}; + +/** + * @brief Motor Configuration + */ +typedef struct { + uint32_t pwma_gpio_num; /*!< Motor PWM A gpio number */ + uint32_t pwmb_gpio_num; /*!< Motor PWM B gpio number */ + uint32_t pwm_freq_hz; /*!< PWM frequency, in Hz */ +} motor_config_t; + +/** + * @brief Motor MCPWM specific configuration + */ +typedef struct { + int group_id; /*!< MCPWM group number */ + uint32_t resolution_hz; /*!< MCPWM timer resolution */ +} motor_mcpwm_config_t; + +/** + * @brief Create Motor based on MCPWM peripheral + * + * @param motor_config: Motor configuration + * @param mcpwm_config: MCPWM specific configuration + * @param ret_motor Returned Motor handle + * @return + * - ESP_OK: Create BDC Motor handle successfully + * - ESP_ERR_INVALID_ARG: Create BDC Motor handle failed because of invalid argument + * - ESP_ERR_NO_MEM: Create BDC Motor handle failed because of out of memory + * - ESP_FAIL: Create BDC Motor handle failed because some other error + */ +esp_err_t motor_new_mcpwm_device(const motor_config_t *motor_config, const motor_mcpwm_config_t *mcpwm_config, motor_t** ret_motor); diff --git a/include/motor_driver.h b/include/motor_driver.h index ff92773..f2fafeb 100644 --- a/include/motor_driver.h +++ b/include/motor_driver.h @@ -1,89 +1,33 @@ -/* - * MIT License - * - * Copyright (c) 2021 Society of Robotics and Automation - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - -#ifndef MOTOR_DRIVER_H -#define MOTOR_DRIVER_H +#pragma once -#include -#include "freertos/FreeRTOS.h" -#include "driver/mcpwm.h" -#include "soc/mcpwm_periph.h" -#include "esp_attr.h" - -#include "esp_log.h" #include "esp_err.h" -#include "pin_defs.h" +#include "mcpwm_interface.h" -#define PARALLEL_MODE 1 -#define NORMAL_MODE 2 +#define MOTOR_A_0 100 +#define MOTOR_A_1 101 #define MOTOR_FORWARD 200 #define MOTOR_BACKWARD 201 #define MOTOR_STOP 202 -#define MOTOR_A_0 100 -#define MOTOR_A_1 101 - -/** - * @brief Enables Motor driver in Parallel or Normal Mode - * - * @param id for id=a, enables motor driver a - * @param mode if mode = 1 is passed, motor driver is operated in parallel mode, if mode = 2 is passed, motor driver is operated in normal mode - */ -#define enable_motor_driver(id, mode) enable_motor_driver_##id(mode) - -/** - * @brief Reads mode of motor driver - * - * @param id for id=a, returns mode of motor driver a - * @return int returns mode of motor driver A, 1 = Parallel mode, 2 = Normal mode - */ -#define read_motor_driver_mode(id) read_motor_driver_mode_##id() - /** - * @brief Enables Motor driver A in Parallel or Normal Mode - * - * @param mode if mode = 1 is passed, motor driver is operated in parallel mode, if mode = 2 is passed, motor driver is operated in normal mode - * @return esp_err_t returns ESP_OK if motor driver initialised properly, else it returns ESP_ERR_INVALID_ARG + * @brief Enable motor driver + * @param motor_handle_t Motor object handle + * @param motor_id set it as MOTOR_A_0, MOTOR_A_1 to select the appropriate motor to bind to the handle. + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed */ -esp_err_t enable_motor_driver_a(int mode); +esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id); -/** - * @brief Set the speed of motors - * +/* + * @brief Set duty cycle for one of the motors. * @param motor_id set it as MOTOR_A_0, MOTOR_A_1 to select the appropriate motor to set its speed and direction * @param direction set is as MOTOR_FORWARD for forward motion, MOTOR_BACKWARD for backward motion, MOTOR_STOP to stop the motor * @param duty_cycle set the duty cycle of the motor driver PWM - * @return esp_err_t returns ESP_OK if speed correctly, ESP_FAIL if any error occurs - */ -esp_err_t set_motor_speed(int motor_id, int direction, float duty_cycle); - -/** - * @brief Reads mode of motor driver A - * - * @return int returns mode of motor driver A, 1 = Parallel mode, 2 = Normal mode - */ -int read_motor_driver_mode_a(); - -#endif + * @return + * - ESP_OK if speed correctly + * - ESP_FAIL if any error occurs +*/ +esp_err_t set_motor_speed(motor_handle_t motor, int direction, float duty_cycle); diff --git a/include/sra_board.h b/include/sra_board.h index 44a28d1..5d019a8 100644 --- a/include/sra_board.h +++ b/include/sra_board.h @@ -29,9 +29,9 @@ #include "bar_graph.h" #include "switches.h" #include "lsa.h" +#include "mcpwm_interface.h" #include "motor_driver.h" #include "mpu6050.h" -#include "servo.h" #include "pin_defs.h" #include "utils.h" @@ -39,4 +39,4 @@ #include "oled.h" #endif -#endif \ No newline at end of file +#endif diff --git a/include/utils.h b/include/utils.h index 5168e0f..3d6bc56 100644 --- a/include/utils.h +++ b/include/utils.h @@ -25,6 +25,8 @@ #ifndef _UTILS_H #define _UTILS_H +#include "esp_log.h" + /** * @brief Bound a value in a range [min, max] * diff --git a/src/bar_graph.c b/src/bar_graph.c index 1e8942d..4cda119 100644 --- a/src/bar_graph.c +++ b/src/bar_graph.c @@ -36,54 +36,54 @@ static const uint8_t bitmask[3] = {0xFF, 0xCF, 0x0F}; // Just an array of pins used by bar graph led static const int pin_out[8] = {BG_LED_1, BG_LED_2, BG_LED_3, BG_LED_4, BG_LED_5, BG_LED_6, BG_LED_7, BG_LED_8}; -esp_err_t enable_bar_graph() -{ - uint64_t bit_mask = 0; - // motor driver a is off so we can use IN1 - IN8 pins - if (read_motor_driver_mode(a) == 0) - { - bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_3) | (1ULL << BG_LED_4) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); - enabled_bar_graph_flag = 0; - } - // motor driver a is in parallel mode, so we can use IN1, IN2, IN5 - IN8 pins - else if (read_motor_driver_mode(a) == 1) - { - bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); - enabled_bar_graph_flag = 1; - } - // motor driver a is in normal mode, so we can use IN5, IN6, IN7, IN8 pins - else if (read_motor_driver_mode(a) == 2) - { - bit_mask = (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); - enabled_bar_graph_flag = 2; - } +// esp_err_t enable_bar_graph() +// { +// uint64_t bit_mask = 0; +// // motor driver a is off so we can use IN1 - IN8 pins +// if (read_motor_driver_mode(a) == 0) +// { +// bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_3) | (1ULL << BG_LED_4) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); +// enabled_bar_graph_flag = 0; +// } +// // motor driver a is in parallel mode, so we can use IN1, IN2, IN5 - IN8 pins +// else if (read_motor_driver_mode(a) == 1) +// { +// bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); +// enabled_bar_graph_flag = 1; +// } +// // motor driver a is in normal mode, so we can use IN5, IN6, IN7, IN8 pins +// else if (read_motor_driver_mode(a) == 2) +// { +// bit_mask = (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); +// enabled_bar_graph_flag = 2; +// } - gpio_config_t io_conf; - // bit mask for the pins, each bit maps to a GPIO - io_conf.pin_bit_mask = bit_mask; - // set gpio mode to input - io_conf.mode = GPIO_MODE_OUTPUT; - // enable pull up resistors - io_conf.pull_up_en = 0; - // disable pull down resistors - io_conf.pull_down_en = 1; - // disable gpio interrupts - io_conf.intr_type = GPIO_INTR_DISABLE; - // detailed description can be found at https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/gpio.html#_CPPv413gpio_config_t +// gpio_config_t io_conf; +// // bit mask for the pins, each bit maps to a GPIO +// io_conf.pin_bit_mask = bit_mask; +// // set gpio mode to input +// io_conf.mode = GPIO_MODE_OUTPUT; +// // enable pull up resistors +// io_conf.pull_up_en = 0; +// // disable pull down resistors +// io_conf.pull_down_en = 1; +// // disable gpio interrupts +// io_conf.intr_type = GPIO_INTR_DISABLE; +// // detailed description can be found at https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/gpio.html#_CPPv413gpio_config_t - esp_err_t err = gpio_config(&io_conf); - if (err == ESP_OK) - { - ESP_LOGI(TAG_BAR_GRAPH, "enabled bar graph leds in mode: %d", enabled_bar_graph_flag); - } - else - { - ESP_LOGE(TAG_BAR_GRAPH, "error: %s", esp_err_to_name(err)); - enabled_bar_graph_flag = 0; - } +// esp_err_t err = gpio_config(&io_conf); +// if (err == ESP_OK) +// { +// ESP_LOGI(TAG_BAR_GRAPH, "enabled bar graph leds in mode: %d", enabled_bar_graph_flag); +// } +// else +// { +// ESP_LOGE(TAG_BAR_GRAPH, "error: %s", esp_err_to_name(err)); +// enabled_bar_graph_flag = 0; +// } - return err; -} +// return err; +// } esp_err_t set_bar_graph(uint8_t data) { diff --git a/src/mcpwm_interface.c b/src/mcpwm_interface.c new file mode 100644 index 0000000..a3819dd --- /dev/null +++ b/src/mcpwm_interface.c @@ -0,0 +1,181 @@ +#include +#include +#include + +#include "esp_log.h" +#include "driver/mcpwm_prelude.h" +#include "esp_check.h" +#include "mcpwm_interface.h" + +static const char *TAG = "MCPWM"; + +typedef struct { + motor_t base; + mcpwm_timer_handle_t timer; + mcpwm_oper_handle_t operator; + mcpwm_cmpr_handle_t cmpa; + mcpwm_cmpr_handle_t cmpb; + mcpwm_gen_handle_t gena; + mcpwm_gen_handle_t genb; +} motor_mcpwm_obj; + +static esp_err_t motor_enable(motor_t *motor) +{ + ESP_RETURN_ON_FALSE(motor, ESP_ERR_INVALID_ARG, TAG, "invalid argument"); + motor_mcpwm_obj *mcpwm_motor = __containerof(motor, motor_mcpwm_obj, base); + ESP_LOGI(TAG, "motor %p enable of timer %p", mcpwm_motor, mcpwm_motor->timer); + ESP_RETURN_ON_ERROR(mcpwm_timer_enable(mcpwm_motor->timer), TAG, "enable timer failed"); + ESP_RETURN_ON_ERROR(mcpwm_timer_start_stop(mcpwm_motor->timer, MCPWM_TIMER_START_NO_STOP), TAG, "start timer failed"); + return ESP_OK; +} + +static esp_err_t motor_disable(motor_t *motor) +{ + ESP_RETURN_ON_FALSE(motor, ESP_ERR_INVALID_ARG, TAG, "invalid argument"); + motor_mcpwm_obj *mcpwm_motor = __containerof(motor, motor_mcpwm_obj, base); + ESP_RETURN_ON_ERROR(mcpwm_timer_start_stop(mcpwm_motor->timer, MCPWM_TIMER_STOP_EMPTY), TAG, "stop timer failed"); + ESP_RETURN_ON_ERROR(mcpwm_timer_disable(mcpwm_motor->timer), TAG, "disable timer failed"); + return ESP_OK; +} + +static esp_err_t motor_set_speed(motor_t *motor, uint32_t speed) +{ + ESP_RETURN_ON_FALSE(motor, ESP_ERR_INVALID_ARG, TAG, "invalid argument"); + motor_mcpwm_obj *mcpwm_motor = __containerof(motor, motor_mcpwm_obj, base); + ESP_RETURN_ON_ERROR(mcpwm_comparator_set_compare_value(mcpwm_motor->cmpa, speed), TAG, "set compare value failed"); + ESP_RETURN_ON_ERROR(mcpwm_comparator_set_compare_value(mcpwm_motor->cmpb, speed), TAG, "set compare value failed"); + return ESP_OK; +} + +static esp_err_t motor_forward(motor_t *motor) +{ + ESP_RETURN_ON_FALSE(motor, ESP_ERR_INVALID_ARG, TAG, "invalid argument"); + motor_mcpwm_obj *mcpwm_motor = __containerof(motor, motor_mcpwm_obj, base); + ESP_RETURN_ON_ERROR(mcpwm_generator_set_force_level(mcpwm_motor->gena, -1, true), TAG, "disable force level for gena failed"); + ESP_RETURN_ON_ERROR(mcpwm_generator_set_force_level(mcpwm_motor->genb, 0, true), TAG, "set force level for genb failed"); + return ESP_OK; +} + +static esp_err_t motor_backwards(motor_t *motor) +{ + ESP_RETURN_ON_FALSE(motor, ESP_ERR_INVALID_ARG, TAG, "invalid argument"); + motor_mcpwm_obj *mcpwm_motor = __containerof(motor, motor_mcpwm_obj, base); + ESP_RETURN_ON_ERROR(mcpwm_generator_set_force_level(mcpwm_motor->genb, -1, true), TAG, "disable force level for genb failed"); + ESP_RETURN_ON_ERROR(mcpwm_generator_set_force_level(mcpwm_motor->gena, 0, true), TAG, "set force level for gena failed"); + return ESP_OK; +} + +static esp_err_t motor_brake(motor_t *motor){ + ESP_RETURN_ON_FALSE(motor, ESP_ERR_INVALID_ARG, TAG, "invalid argument"); + motor_mcpwm_obj *mcpwm_motor = __containerof(motor, motor_mcpwm_obj, base); + ESP_RETURN_ON_ERROR(mcpwm_generator_set_force_level(mcpwm_motor->gena, 1, true), TAG, "set force level for gena failed"); + ESP_RETURN_ON_ERROR(mcpwm_generator_set_force_level(mcpwm_motor->genb, 1, true), TAG, "set force level for genb failed"); + return ESP_OK; +} + +static esp_err_t motor_del(motor_t *motor) +{ + motor_mcpwm_obj *mcpwm_motor = __containerof(motor, motor_mcpwm_obj, base); + mcpwm_del_generator(mcpwm_motor->gena); + mcpwm_del_generator(mcpwm_motor->genb); + mcpwm_del_comparator(mcpwm_motor->cmpa); + mcpwm_del_comparator(mcpwm_motor->cmpb); + mcpwm_del_operator(mcpwm_motor->operator); + mcpwm_del_timer(mcpwm_motor->timer); + free(mcpwm_motor); + return ESP_OK; +} + + +esp_err_t motor_new_mcpwm_device(const motor_config_t *motor_config, const motor_mcpwm_config_t *mcpwm_config, motor_t** ret_motor){ + + motor_mcpwm_obj *mcpwm_motor = NULL; + esp_err_t ret = ESP_OK; + + ESP_GOTO_ON_FALSE(motor_config && mcpwm_config && ret_motor, ESP_ERR_INVALID_ARG, err, TAG, "invalid argument"); + mcpwm_motor = calloc(1, sizeof(motor_mcpwm_obj)); + ESP_GOTO_ON_FALSE(mcpwm_motor, ESP_ERR_NO_MEM, err, TAG, "no mem for motor"); + + //timer + mcpwm_timer_config_t timer_config = { + .group_id = mcpwm_config->group_id, + .clk_src = MCPWM_TIMER_CLK_SRC_DEFAULT, + .resolution_hz = mcpwm_config->resolution_hz, + .period_ticks = mcpwm_config->resolution_hz / motor_config->pwm_freq_hz, + .count_mode = MCPWM_TIMER_COUNT_MODE_UP, + }; + ESP_GOTO_ON_ERROR(mcpwm_new_timer(&timer_config, &mcpwm_motor->timer), err, TAG, "create MCPWM timer failed"); + + mcpwm_operator_config_t operator_config = { + .group_id = mcpwm_config->group_id, + }; + ESP_GOTO_ON_ERROR(mcpwm_new_operator(&operator_config, &mcpwm_motor->operator), err, TAG, "create MCPWM operator failed"); + ESP_GOTO_ON_ERROR(mcpwm_operator_connect_timer(mcpwm_motor->operator, mcpwm_motor->timer), err, TAG, "connect timer and operator failed"); + + mcpwm_comparator_config_t comparator_config = { + .flags.update_cmp_on_tez = true, + }; + ESP_GOTO_ON_ERROR(mcpwm_new_comparator(mcpwm_motor->operator, &comparator_config, &mcpwm_motor->cmpa), err, TAG, "create comparator failed"); + ESP_GOTO_ON_ERROR(mcpwm_new_comparator(mcpwm_motor->operator, &comparator_config, &mcpwm_motor->cmpb), err, TAG, "create comparator failed"); + + // set the initial compare value for both comparators + mcpwm_comparator_set_compare_value(mcpwm_motor->cmpa, 0); + mcpwm_comparator_set_compare_value(mcpwm_motor->cmpb, 0); + + mcpwm_generator_config_t generator_config = { + .gen_gpio_num = motor_config->pwma_gpio_num, + }; + ESP_GOTO_ON_ERROR(mcpwm_new_generator(mcpwm_motor->operator, &generator_config, &mcpwm_motor->gena), err, TAG, "create generator failed"); + generator_config.gen_gpio_num = motor_config->pwmb_gpio_num; + ESP_GOTO_ON_ERROR(mcpwm_new_generator(mcpwm_motor->operator, &generator_config, &mcpwm_motor->genb), err, TAG, "create generator failed"); + + mcpwm_generator_set_actions_on_timer_event(mcpwm_motor->gena, + MCPWM_GEN_TIMER_EVENT_ACTION(MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_EMPTY, MCPWM_GEN_ACTION_HIGH), + MCPWM_GEN_TIMER_EVENT_ACTION_END()); + mcpwm_generator_set_actions_on_compare_event(mcpwm_motor->gena, + MCPWM_GEN_COMPARE_EVENT_ACTION(MCPWM_TIMER_DIRECTION_UP, mcpwm_motor->cmpa, MCPWM_GEN_ACTION_LOW), + MCPWM_GEN_COMPARE_EVENT_ACTION_END()); + mcpwm_generator_set_actions_on_timer_event(mcpwm_motor->genb, + MCPWM_GEN_TIMER_EVENT_ACTION(MCPWM_TIMER_DIRECTION_UP, MCPWM_TIMER_EVENT_EMPTY, MCPWM_GEN_ACTION_HIGH), + MCPWM_GEN_TIMER_EVENT_ACTION_END()); + mcpwm_generator_set_actions_on_compare_event(mcpwm_motor->genb, + MCPWM_GEN_COMPARE_EVENT_ACTION(MCPWM_TIMER_DIRECTION_UP, mcpwm_motor->cmpb, MCPWM_GEN_ACTION_LOW), + MCPWM_GEN_COMPARE_EVENT_ACTION_END()); + + mcpwm_motor->base.enable = motor_enable; + mcpwm_motor->base.disable = motor_disable; + mcpwm_motor->base.set_speed = motor_set_speed; + mcpwm_motor->base.forward = motor_forward; + mcpwm_motor->base.backwards = motor_backwards; + mcpwm_motor->base.brake = motor_brake; + mcpwm_motor->base.del = motor_del; + + *ret_motor = &mcpwm_motor->base; + ESP_LOGI(TAG, "motor %p created", mcpwm_motor); + ESP_LOGI(TAG, "motor timer %p created", mcpwm_motor->timer); + return ESP_OK; + +err: + if (mcpwm_motor) { + if (mcpwm_motor->gena) { + mcpwm_del_generator(mcpwm_motor->gena); + } + if (mcpwm_motor->genb) { + mcpwm_del_generator(mcpwm_motor->genb); + } + if (mcpwm_motor->cmpa) { + mcpwm_del_comparator(mcpwm_motor->cmpa); + } + if (mcpwm_motor->cmpb) { + mcpwm_del_comparator(mcpwm_motor->cmpb); + } + if (mcpwm_motor->operator) { + mcpwm_del_operator(mcpwm_motor->operator); + } + if (mcpwm_motor->timer) { + mcpwm_del_timer(mcpwm_motor->timer); + } + free(mcpwm_motor); + } + return ret; +} diff --git a/src/motor_driver.c b/src/motor_driver.c index 1bb9d6d..af689e3 100644 --- a/src/motor_driver.c +++ b/src/motor_driver.c @@ -1,172 +1,48 @@ -/* - * MIT License - * - * Copyright (c) 2021 Society of Robotics and Automation - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to deal - * in the Software without restriction, including without limitation the rights - * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell - * copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in all - * copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, - * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - */ - +#include "esp_log.h" +#include "esp_check.h" #include "motor_driver.h" - -static const char *TAG_MOTOR_DRIVER = "motor_driver"; -static int mode_motor_driver_a = 0; - -esp_err_t enable_motor_driver_a(int mode) -{ - esp_err_t err; - - if (mode == PARALLEL_MODE) - { - CHECK_LOGE(err, mcpwm_gpio_init(MCPWM_UNIT_1, MCPWM0A, MDA_PARALLEL_IN_1_2), TAG_MOTOR_DRIVER, "error: %s", esp_err_to_name(err)); - CHECK_LOGE(err, mcpwm_gpio_init(MCPWM_UNIT_1, MCPWM0B, MDA_PARALLEL_IN_3_4), TAG_MOTOR_DRIVER, "error: %s", esp_err_to_name(err)); - } - else if (mode == NORMAL_MODE) - { - CHECK_LOGE(err, mcpwm_gpio_init(MCPWM_UNIT_1, MCPWM0A, MDA_NORMAL_IN_1), TAG_MOTOR_DRIVER, "error: %s", esp_err_to_name(err)); - CHECK_LOGE(err, mcpwm_gpio_init(MCPWM_UNIT_1, MCPWM0B, MDA_NORMAL_IN_2), TAG_MOTOR_DRIVER, "error: %s", esp_err_to_name(err)); - CHECK_LOGE(err, mcpwm_gpio_init(MCPWM_UNIT_1, MCPWM1A, MDA_NORMAL_IN_3), TAG_MOTOR_DRIVER, "error: %s", esp_err_to_name(err)); - CHECK_LOGE(err, mcpwm_gpio_init(MCPWM_UNIT_1, MCPWM1B, MDA_NORMAL_IN_4), TAG_MOTOR_DRIVER, "error: %s", esp_err_to_name(err)); - } - else - { - ESP_LOGE(TAG_MOTOR_DRIVER, "error: %s", "invalid motor driver mode selected"); - return ESP_FAIL; - } - - mcpwm_config_t pwm_config; - // sets the pwm frequency = 20000 - pwm_config.frequency = 20000; - // sets the initial duty cycle of PWMxA = 0 - pwm_config.cmpr_a = 0; - // sets the initial duty cycle of PWMxB = 0 - pwm_config.cmpr_b = 0; - // sets the pwm counter mode - pwm_config.counter_mode = MCPWM_UP_COUNTER; - // sets the pwm duty mode - pwm_config.duty_mode = MCPWM_DUTY_MODE_0; - - if (mode == PARALLEL_MODE) - { - esp_err_t err1_0 = mcpwm_init(MCPWM_UNIT_1, MCPWM_TIMER_0, &pwm_config); - - if (err1_0 == ESP_OK) - { - ESP_LOGI(TAG_MOTOR_DRIVER, "enabled motor driver A in parallel mode"); - - mode_motor_driver_a = 1; - return ESP_OK; - } - else - { - mode_motor_driver_a = 0; - return ESP_FAIL; - } - } - else if (mode == NORMAL_MODE) - { - esp_err_t err1_0 = mcpwm_init(MCPWM_UNIT_1, MCPWM_TIMER_0, &pwm_config); - esp_err_t err1_1 = mcpwm_init(MCPWM_UNIT_1, MCPWM_TIMER_1, &pwm_config); - - if (err1_0 == ESP_OK && err1_1 == ESP_OK) - { - ESP_LOGI(TAG_MOTOR_DRIVER, "enabled motor driver A in normal mode"); - mode_motor_driver_a = 2; - - return ESP_OK; - } - else - { - mode_motor_driver_a = 0; - return ESP_FAIL; - } - } - else - { - ESP_LOGE(TAG_MOTOR_DRIVER, "error: %s", "invalid motor driver mode selected"); - return ESP_FAIL; - } -} - -static esp_err_t set_motor_speed_helper(int direction, float duty_cycle, mcpwm_unit_t mcpwm_num, mcpwm_timer_t timer_num) -{ - if (direction == MOTOR_FORWARD) - { - mcpwm_set_duty(mcpwm_num, timer_num, MCPWM_OPR_A, duty_cycle); - mcpwm_set_duty_type(mcpwm_num, timer_num, MCPWM_OPR_A, MCPWM_DUTY_MODE_0); - mcpwm_set_duty(mcpwm_num, timer_num, MCPWM_OPR_B, 0); - mcpwm_set_duty_type(mcpwm_num, timer_num, MCPWM_OPR_B, MCPWM_DUTY_MODE_0); - - return ESP_OK; - } - else if (direction == MOTOR_BACKWARD) - { - mcpwm_set_duty(mcpwm_num, timer_num, MCPWM_OPR_A, 0); - mcpwm_set_duty_type(mcpwm_num, timer_num, MCPWM_OPR_A, MCPWM_DUTY_MODE_0); - mcpwm_set_duty(mcpwm_num, timer_num, MCPWM_OPR_B, duty_cycle); - mcpwm_set_duty_type(mcpwm_num, timer_num, MCPWM_OPR_B, MCPWM_DUTY_MODE_0); - - return ESP_OK; - } - else if (direction == MOTOR_STOP) - { - mcpwm_set_duty(mcpwm_num, timer_num, MCPWM_OPR_A, 0); - mcpwm_set_duty_type(mcpwm_num, timer_num, MCPWM_OPR_A, MCPWM_DUTY_MODE_0); - mcpwm_set_duty(mcpwm_num, timer_num, MCPWM_OPR_B, 0); - mcpwm_set_duty_type(mcpwm_num, timer_num, MCPWM_OPR_B, MCPWM_DUTY_MODE_0); - - return ESP_OK; - } - else - { - ESP_LOGE(TAG_MOTOR_DRIVER, "invalid motor direction selected"); - return ESP_FAIL; - } +#include "utils.h" +#include "pin_defs.h" + +static const char *TAG = "MOTOR"; + +esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id) { + motor_config_t motor_config; + if(motor_id == MOTOR_A_0){ + motor_config.pwma_gpio_num = MDA_NORMAL_IN_1, + motor_config.pwmb_gpio_num = MDA_NORMAL_IN_2, + motor_config.pwm_freq_hz = 20000; // 20kHz PWM frequency + } else if(motor_id == MOTOR_A_1) { + motor_config.pwma_gpio_num = MDA_NORMAL_IN_3, + motor_config.pwmb_gpio_num = MDA_NORMAL_IN_4, + motor_config.pwm_freq_hz = 20000; // 20kHz PWM frequency + } else { + ESP_LOGE(TAG, "Invalid motor id"); + return ESP_FAIL; + } + motor_mcpwm_config_t motor_mcpwm_config; + motor_mcpwm_config.group_id = 0; + motor_mcpwm_config.resolution_hz = 10000000; // 10MHz + ESP_ERROR_CHECK(motor_new_mcpwm_device(&motor_config, &motor_mcpwm_config, motor)); + ESP_ERROR_CHECK((*motor)->enable(*motor)); + return ESP_OK; } -esp_err_t set_motor_speed(int motor_id, int direction, float duty_cycle) -{ - if ((motor_id == MOTOR_A_0 || motor_id == MOTOR_A_1) && read_motor_driver_mode(a) != 0) - { - if (read_motor_driver_mode(a) == PARALLEL_MODE) - { - return set_motor_speed_helper(direction, duty_cycle, MCPWM_UNIT_1, MCPWM_TIMER_0); - } - else if (read_motor_driver_mode(a) == NORMAL_MODE) - { - mcpwm_timer_t timer_val = motor_id == MOTOR_A_0 ? MCPWM_TIMER_0 : MCPWM_TIMER_1; - - return set_motor_speed_helper(direction, duty_cycle, MCPWM_UNIT_1, timer_val); - } - else - { - ESP_LOGE(TAG_MOTOR_DRIVER, "error: %s", "motor driver A is disabled, call enable_motor_driver(a)"); - return ESP_FAIL; - } - } - else - { - ESP_LOGE(TAG_MOTOR_DRIVER, "invalid motor_id selected"); - return ESP_FAIL; - } +esp_err_t set_motor_speed(motor_handle_t motor, int direction, float speed) { + speed = (uint32_t)map(speed, 0, 100, 0, 500); + if(direction == MOTOR_FORWARD){ + motor->forward(motor); + motor->set_speed(motor, speed); + return ESP_OK; + } else if(direction == MOTOR_BACKWARD){ + motor->backwards(motor); + motor->set_speed(motor, speed); + return ESP_OK; + } else if(direction == MOTOR_STOP){ + motor->brake(motor); + return ESP_OK; + } else { + ESP_LOGE(TAG, "Invalid motor direction"); + return ESP_FAIL; + } } - -int read_motor_driver_mode_a() -{ - return mode_motor_driver_a; -} \ No newline at end of file From 9e89c43ebc1d64671d479811c2e97edb1ae9a628 Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 10 Jan 2024 23:52:30 +0530 Subject: [PATCH 02/11] Update .gitignore Delete .vscode directory Uncommented out code and add license headers to header files Add .gitignore entry for sdkconfig file --- .vscode/launch.json | 10 - .vscode/settings.json | 17 - .vscode/tasks.json | 258 ---- examples/bar_graph/sdkconfig | 1858 ------------------------ examples/motor_driver_normal/sdkconfig | 1858 ------------------------ examples/servos/sdkconfig | 1115 -------------- include/bar_graph.h | 1 - include/mcpwm_interface.h | 24 + include/motor_driver.h | 24 + src/bar_graph.c | 90 +- src/mcpwm_interface.c | 24 + src/motor_driver.c | 24 + 12 files changed, 141 insertions(+), 5162 deletions(-) delete mode 100644 .vscode/launch.json delete mode 100644 .vscode/settings.json delete mode 100644 .vscode/tasks.json delete mode 100644 examples/bar_graph/sdkconfig delete mode 100644 examples/motor_driver_normal/sdkconfig delete mode 100644 examples/servos/sdkconfig diff --git a/.vscode/launch.json b/.vscode/launch.json deleted file mode 100644 index 6d2236f..0000000 --- a/.vscode/launch.json +++ /dev/null @@ -1,10 +0,0 @@ -{ - "version": "0.2.0", - "configurations": [ - { - "type": "espidf", - "name": "Launch", - "request": "launch" - } - ] -} \ No newline at end of file diff --git a/.vscode/settings.json b/.vscode/settings.json deleted file mode 100644 index f19fa1c..0000000 --- a/.vscode/settings.json +++ /dev/null @@ -1,17 +0,0 @@ -{ - "idf.espIdfPath": "/Users/zainsiddavatam/esp/esp-idf", - "files.associations": { - "*.embeddedhtml": "html", - "mcpwm.h": "c", - "cdefs.h": "c", - "mcpwm_prelude.h": "c", - "freertos.h": "c", - "esp_check.h": "c" - }, - "idf.adapterTargetName": "esp32", - "idf.openOcdConfigs": [ - "board/esp32-wrover-kit-3.3v.cfg" - ], - "idf.port": "/dev/cu.usbserial-10", - "idf.flashType": "UART" -} \ No newline at end of file diff --git a/.vscode/tasks.json b/.vscode/tasks.json deleted file mode 100644 index d72c4f6..0000000 --- a/.vscode/tasks.json +++ /dev/null @@ -1,258 +0,0 @@ -{ - "version": "2.0.0", - "tasks": [ - { - "label": "Build - Build project", - "type": "shell", - "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py build", - "windows": { - "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py build", - "options": { - "env": { - "PATH": "${env:PATH};${config:idf.customExtraPaths}" - } - } - }, - "options": { - "env": { - "PATH": "${env:PATH}:${config:idf.customExtraPaths}" - } - }, - "problemMatcher": [ - { - "owner": "cpp", - "fileLocation": [ - "autoDetect", - "${workspaceFolder}" - ], - "pattern": { - "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", - "file": 1, - "line": 2, - "column": 3, - "severity": 4, - "message": 5 - } - } - ], - "group": { - "kind": "build", - "isDefault": true - } - }, - { - "label": "Set ESP-IDF Target", - "type": "shell", - "command": "${command:espIdf.setTarget}", - "problemMatcher": { - "owner": "cpp", - "fileLocation": [ - "autoDetect", - "${workspaceFolder}" - ], - "pattern": { - "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", - "file": 1, - "line": 2, - "column": 3, - "severity": 4, - "message": 5 - } - } - }, - { - "label": "Clean - Clean the project", - "type": "shell", - "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py fullclean", - "windows": { - "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py fullclean", - "options": { - "env": { - "PATH": "${env:PATH};${config:idf.customExtraPaths}" - } - } - }, - "options": { - "env": { - "PATH": "${env:PATH}:${config:idf.customExtraPaths}" - } - }, - "problemMatcher": [ - { - "owner": "cpp", - "fileLocation": [ - "autoDetect", - "${workspaceFolder}" - ], - "pattern": { - "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", - "file": 1, - "line": 2, - "column": 3, - "severity": 4, - "message": 5 - } - } - ] - }, - { - "label": "Flash - Flash the device", - "type": "shell", - "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py -p ${config:idf.port} -b ${config:idf.flashBaudRate} flash", - "windows": { - "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py flash -p ${config:idf.portWin} -b ${config:idf.flashBaudRate}", - "options": { - "env": { - "PATH": "${env:PATH};${config:idf.customExtraPaths}" - } - } - }, - "options": { - "env": { - "PATH": "${env:PATH}:${config:idf.customExtraPaths}" - } - }, - "problemMatcher": [ - { - "owner": "cpp", - "fileLocation": [ - "autoDetect", - "${workspaceFolder}" - ], - "pattern": { - "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", - "file": 1, - "line": 2, - "column": 3, - "severity": 4, - "message": 5 - } - } - ] - }, - { - "label": "Monitor: Start the monitor", - "type": "shell", - "command": "${config:idf.pythonBinPath} ${config:idf.espIdfPath}/tools/idf.py -p ${config:idf.port} monitor", - "windows": { - "command": "${config:idf.pythonBinPathWin} ${config:idf.espIdfPathWin}\\tools\\idf.py -p ${config:idf.portWin} monitor", - "options": { - "env": { - "PATH": "${env:PATH};${config:idf.customExtraPaths}" - } - } - }, - "options": { - "env": { - "PATH": "${env:PATH}:${config:idf.customExtraPaths}" - } - }, - "problemMatcher": [ - { - "owner": "cpp", - "fileLocation": [ - "autoDetect", - "${workspaceFolder}" - ], - "pattern": { - "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", - "file": 1, - "line": 2, - "column": 3, - "severity": 4, - "message": 5 - } - } - ], - "dependsOn": "Flash - Flash the device" - }, - { - "label": "OpenOCD: Start openOCD", - "type": "shell", - "presentation": { - "echo": true, - "reveal": "never", - "focus": false, - "panel": "new" - }, - "command": "openocd -s ${command:espIdf.getOpenOcdScriptValue} ${command:espIdf.getOpenOcdConfigs}", - "windows": { - "command": "openocd.exe -s ${command:espIdf.getOpenOcdScriptValue} ${command:espIdf.getOpenOcdConfigs}", - "options": { - "env": { - "PATH": "${env:PATH};${config:idf.customExtraPaths}" - } - } - }, - "options": { - "env": { - "PATH": "${env:PATH}:${config:idf.customExtraPaths}" - } - }, - "problemMatcher": { - "owner": "cpp", - "fileLocation": [ - "autoDetect", - "${workspaceFolder}" - ], - "pattern": { - "regexp": "^(.*?):(\\d+):(\\d*):?\\s+(?:fatal\\s+)?(warning|error):\\s+(.*)$", - "file": 1, - "line": 2, - "column": 3, - "severity": 4, - "message": 5 - } - } - }, - { - "label": "adapter", - "type": "shell", - "command": "${config:idf.pythonBinPath}", - "isBackground": true, - "options": { - "env": { - "PATH": "${env:PATH}:${config:idf.customExtraPaths}", - "PYTHONPATH": "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter" - } - }, - "problemMatcher": { - "background": { - "beginsPattern": "\bDEBUG_ADAPTER_STARTED\b", - "endsPattern": "DEBUG_ADAPTER_READY2CONNECT", - "activeOnStart": true - }, - "pattern": { - "regexp": "(\\d+)-(\\d+)-(\\d+)\\s(\\d+):(\\d+):(\\d+),(\\d+)\\s-(.+)\\s(ERROR)", - "file": 8, - "line": 2, - "column": 3, - "severity": 4, - "message": 9 - } - }, - "args": [ - "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter_main.py", - "-e", - "${workspaceFolder}/build/${command:espIdf.getProjectName}.elf", - "-s", - "${command:espIdf.getOpenOcdScriptValue}", - "-ip", - "localhost", - "-dn", - "${config:idf.adapterTargetName}", - "-om", - "connect_to_instance" - ], - "windows": { - "command": "${config:idf.pythonBinPathWin}", - "options": { - "env": { - "PATH": "${env:PATH};${config:idf.customExtraPaths}", - "PYTHONPATH": "${command:espIdf.getExtensionPath}/esp_debug_adapter/debug_adapter" - } - } - } - } - ] -} \ No newline at end of file diff --git a/examples/bar_graph/sdkconfig b/examples/bar_graph/sdkconfig deleted file mode 100644 index ff31a74..0000000 --- a/examples/bar_graph/sdkconfig +++ /dev/null @@ -1,1858 +0,0 @@ -# -# Automatically generated file. DO NOT EDIT. -# Espressif IoT Development Framework (ESP-IDF) 5.1.1 Project Configuration -# -CONFIG_SOC_BROWNOUT_RESET_SUPPORTED="Not determined" -CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED="Not determined" -CONFIG_SOC_DPORT_WORKAROUND="Not determined" -CONFIG_SOC_CAPS_ECO_VER_MAX=301 -CONFIG_SOC_ADC_SUPPORTED=y -CONFIG_SOC_DAC_SUPPORTED=y -CONFIG_SOC_UART_SUPPORTED=y -CONFIG_SOC_MCPWM_SUPPORTED=y -CONFIG_SOC_GPTIMER_SUPPORTED=y -CONFIG_SOC_SDMMC_HOST_SUPPORTED=y -CONFIG_SOC_BT_SUPPORTED=y -CONFIG_SOC_PCNT_SUPPORTED=y -CONFIG_SOC_WIFI_SUPPORTED=y -CONFIG_SOC_SDIO_SLAVE_SUPPORTED=y -CONFIG_SOC_TWAI_SUPPORTED=y -CONFIG_SOC_EMAC_SUPPORTED=y -CONFIG_SOC_ULP_SUPPORTED=y -CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y -CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y -CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y -CONFIG_SOC_RTC_MEM_SUPPORTED=y -CONFIG_SOC_I2S_SUPPORTED=y -CONFIG_SOC_RMT_SUPPORTED=y -CONFIG_SOC_SDM_SUPPORTED=y -CONFIG_SOC_GPSPI_SUPPORTED=y -CONFIG_SOC_LEDC_SUPPORTED=y -CONFIG_SOC_I2C_SUPPORTED=y -CONFIG_SOC_SUPPORT_COEXISTENCE=y -CONFIG_SOC_AES_SUPPORTED=y -CONFIG_SOC_MPI_SUPPORTED=y -CONFIG_SOC_SHA_SUPPORTED=y -CONFIG_SOC_FLASH_ENC_SUPPORTED=y -CONFIG_SOC_SECURE_BOOT_SUPPORTED=y -CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y -CONFIG_SOC_BOD_SUPPORTED=y -CONFIG_SOC_ULP_FSM_SUPPORTED=y -CONFIG_SOC_DPORT_WORKAROUND_DIS_INTERRUPT_LVL=5 -CONFIG_SOC_XTAL_SUPPORT_26M=y -CONFIG_SOC_XTAL_SUPPORT_40M=y -CONFIG_SOC_XTAL_SUPPORT_AUTO_DETECT=y -CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y -CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y -CONFIG_SOC_ADC_DMA_SUPPORTED=y -CONFIG_SOC_ADC_PERIPH_NUM=2 -CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10 -CONFIG_SOC_ADC_ATTEN_NUM=4 -CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2 -CONFIG_SOC_ADC_PATT_LEN_MAX=16 -CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=9 -CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12 -CONFIG_SOC_ADC_DIGI_RESULT_BYTES=2 -CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4 -CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=2 -CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=20 -CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=9 -CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12 -CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y -CONFIG_SOC_IDCACHE_PER_CORE=y -CONFIG_SOC_CPU_CORES_NUM=2 -CONFIG_SOC_CPU_INTR_NUM=32 -CONFIG_SOC_CPU_HAS_FPU=y -CONFIG_SOC_CPU_BREAKPOINTS_NUM=2 -CONFIG_SOC_CPU_WATCHPOINTS_NUM=2 -CONFIG_SOC_CPU_WATCHPOINT_SIZE=64 -CONFIG_SOC_DAC_CHAN_NUM=2 -CONFIG_SOC_DAC_RESOLUTION=8 -CONFIG_SOC_DAC_DMA_16BIT_ALIGN=y -CONFIG_SOC_GPIO_PORT=1 -CONFIG_SOC_GPIO_PIN_COUNT=40 -CONFIG_SOC_GPIO_VALID_GPIO_MASK=0xFFFFFFFFFF -CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0xEF0FEA -CONFIG_SOC_I2C_NUM=2 -CONFIG_SOC_I2C_FIFO_LEN=32 -CONFIG_SOC_I2C_CMD_REG_NUM=16 -CONFIG_SOC_I2C_SUPPORT_SLAVE=y -CONFIG_SOC_I2C_SUPPORT_APB=y -CONFIG_SOC_I2S_NUM=2 -CONFIG_SOC_I2S_HW_VERSION_1=y -CONFIG_SOC_I2S_SUPPORTS_APLL=y -CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y -CONFIG_SOC_I2S_SUPPORTS_PDM=y -CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y -CONFIG_SOC_I2S_PDM_MAX_TX_LINES=1 -CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y -CONFIG_SOC_I2S_PDM_MAX_RX_LINES=1 -CONFIG_SOC_I2S_SUPPORTS_ADC_DAC=y -CONFIG_SOC_I2S_SUPPORTS_ADC=y -CONFIG_SOC_I2S_SUPPORTS_DAC=y -CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA=y -CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD=y -CONFIG_SOC_I2S_LCD_I80_VARIANT=y -CONFIG_SOC_LCD_I80_SUPPORTED=y -CONFIG_SOC_LCD_I80_BUSES=2 -CONFIG_SOC_LCD_I80_BUS_WIDTH=24 -CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX=y -CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y -CONFIG_SOC_LEDC_SUPPORT_REF_TICK=y -CONFIG_SOC_LEDC_SUPPORT_HS_MODE=y -CONFIG_SOC_LEDC_CHANNEL_NUM=8 -CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=20 -CONFIG_SOC_MCPWM_GROUPS=2 -CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3 -CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3 -CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3 -CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y -CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3 -CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3 -CONFIG_SOC_MMU_PERIPH_NUM=2 -CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=3 -CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000 -CONFIG_SOC_MPU_REGIONS_MAX_NUM=8 -CONFIG_SOC_PCNT_GROUPS=1 -CONFIG_SOC_PCNT_UNITS_PER_GROUP=8 -CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2 -CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2 -CONFIG_SOC_RMT_GROUPS=1 -CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=8 -CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=8 -CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8 -CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=64 -CONFIG_SOC_RMT_SUPPORT_REF_TICK=y -CONFIG_SOC_RMT_SUPPORT_APB=y -CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT=y -CONFIG_SOC_RTCIO_PIN_COUNT=18 -CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y -CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y -CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y -CONFIG_SOC_SDM_GROUPS=1 -CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8 -CONFIG_SOC_SDM_CLK_SUPPORT_APB=y -CONFIG_SOC_SPI_HD_BOTH_INOUT_SUPPORTED=y -CONFIG_SOC_SPI_AS_CS_SUPPORTED=y -CONFIG_SOC_SPI_PERIPH_NUM=3 -CONFIG_SOC_SPI_DMA_CHAN_NUM=2 -CONFIG_SOC_SPI_MAX_CS_NUM=3 -CONFIG_SOC_SPI_SUPPORT_CLK_APB=y -CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64 -CONFIG_SOC_SPI_MAX_PRE_DIVIDER=8192 -CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y -CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y -CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y -CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y -CONFIG_SOC_TIMER_GROUPS=2 -CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2 -CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=64 -CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4 -CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y -CONFIG_SOC_TOUCH_VERSION_1=y -CONFIG_SOC_TOUCH_SENSOR_NUM=10 -CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX=0xFF -CONFIG_SOC_TWAI_CONTROLLER_NUM=1 -CONFIG_SOC_TWAI_BRP_MIN=2 -CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y -CONFIG_SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT=y -CONFIG_SOC_UART_NUM=3 -CONFIG_SOC_UART_SUPPORT_APB_CLK=y -CONFIG_SOC_UART_SUPPORT_REF_TICK=y -CONFIG_SOC_UART_FIFO_LEN=128 -CONFIG_SOC_UART_BITRATE_MAX=5000000 -CONFIG_SOC_SPIRAM_SUPPORTED=y -CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y -CONFIG_SOC_SHA_SUPPORT_PARALLEL_ENG=y -CONFIG_SOC_SHA_SUPPORT_SHA1=y -CONFIG_SOC_SHA_SUPPORT_SHA256=y -CONFIG_SOC_SHA_SUPPORT_SHA384=y -CONFIG_SOC_SHA_SUPPORT_SHA512=y -CONFIG_SOC_RSA_MAX_BIT_LEN=4096 -CONFIG_SOC_AES_SUPPORT_AES_128=y -CONFIG_SOC_AES_SUPPORT_AES_192=y -CONFIG_SOC_AES_SUPPORT_AES_256=y -CONFIG_SOC_SECURE_BOOT_V1=y -CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=y -CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32 -CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21 -CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y -CONFIG_SOC_PM_SUPPORT_RTC_FAST_MEM_PD=y -CONFIG_SOC_PM_SUPPORT_RTC_SLOW_MEM_PD=y -CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y -CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y -CONFIG_SOC_PM_SUPPORT_MODEM_PD=y -CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y -CONFIG_SOC_CLK_APLL_SUPPORTED=y -CONFIG_SOC_APLL_MULTIPLIER_OUT_MIN_HZ=350000000 -CONFIG_SOC_APLL_MULTIPLIER_OUT_MAX_HZ=500000000 -CONFIG_SOC_APLL_MIN_HZ=5303031 -CONFIG_SOC_APLL_MAX_HZ=125000000 -CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y -CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y -CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y -CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y -CONFIG_SOC_SDMMC_USE_IOMUX=y -CONFIG_SOC_SDMMC_NUM_SLOTS=2 -CONFIG_SOC_WIFI_WAPI_SUPPORT=y -CONFIG_SOC_WIFI_CSI_SUPPORT=y -CONFIG_SOC_WIFI_MESH_SUPPORT=y -CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y -CONFIG_SOC_WIFI_NAN_SUPPORT=y -CONFIG_SOC_BLE_SUPPORTED=y -CONFIG_SOC_BLE_MESH_SUPPORTED=y -CONFIG_SOC_BT_CLASSIC_SUPPORTED=y -CONFIG_SOC_BLUFI_SUPPORTED=y -CONFIG_SOC_ULP_HAS_ADC=y -CONFIG_IDF_CMAKE=y -CONFIG_IDF_TARGET_ARCH_XTENSA=y -CONFIG_IDF_TARGET_ARCH="xtensa" -CONFIG_IDF_TARGET="esp32" -CONFIG_IDF_TARGET_ESP32=y -CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000 - -# -# Build type -# -CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y -# CONFIG_APP_BUILD_TYPE_RAM is not set -CONFIG_APP_BUILD_GENERATE_BINARIES=y -CONFIG_APP_BUILD_BOOTLOADER=y -CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y -# CONFIG_APP_REPRODUCIBLE_BUILD is not set -# CONFIG_APP_NO_BLOBS is not set -# CONFIG_APP_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set -# CONFIG_APP_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set -# end of Build type - -# -# Bootloader config -# -CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000 -CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set -CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y -# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set -CONFIG_BOOTLOADER_LOG_LEVEL=3 -# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set -CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y -# CONFIG_BOOTLOADER_FACTORY_RESET is not set -# CONFIG_BOOTLOADER_APP_TEST is not set -CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y -CONFIG_BOOTLOADER_WDT_ENABLE=y -# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set -CONFIG_BOOTLOADER_WDT_TIME_MS=9000 -# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set -CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 -# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set -CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y -# end of Bootloader config - -# -# Security features -# -CONFIG_SECURE_BOOT_V1_SUPPORTED=y -# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set -# CONFIG_SECURE_BOOT is not set -# CONFIG_SECURE_FLASH_ENC_ENABLED is not set -# end of Security features - -# -# Application manager -# -CONFIG_APP_COMPILE_TIME_DATE=y -# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set -# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set -# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set -CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 -# end of Application manager - -CONFIG_ESP_ROM_HAS_CRC_LE=y -CONFIG_ESP_ROM_HAS_CRC_BE=y -CONFIG_ESP_ROM_HAS_MZ_CRC32=y -CONFIG_ESP_ROM_HAS_JPEG_DECODE=y -CONFIG_ESP_ROM_HAS_UART_BUF_SWITCH=y -CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y -CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y - -# -# Serial flasher config -# -# CONFIG_ESPTOOLPY_NO_STUB is not set -# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set -# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set -CONFIG_ESPTOOLPY_FLASHMODE_DIO=y -# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set -CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y -CONFIG_ESPTOOLPY_FLASHMODE="dio" -# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set -CONFIG_ESPTOOLPY_FLASHFREQ_40M=y -# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set -# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set -CONFIG_ESPTOOLPY_FLASHFREQ="40m" -# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set -CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y -# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set -CONFIG_ESPTOOLPY_FLASHSIZE="2MB" -# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set -CONFIG_ESPTOOLPY_BEFORE_RESET=y -# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set -CONFIG_ESPTOOLPY_BEFORE="default_reset" -CONFIG_ESPTOOLPY_AFTER_RESET=y -# CONFIG_ESPTOOLPY_AFTER_NORESET is not set -CONFIG_ESPTOOLPY_AFTER="hard_reset" -CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 -# end of Serial flasher config - -# -# Partition Table -# -CONFIG_PARTITION_TABLE_SINGLE_APP=y -# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set -# CONFIG_PARTITION_TABLE_TWO_OTA is not set -# CONFIG_PARTITION_TABLE_CUSTOM is not set -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" -CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv" -CONFIG_PARTITION_TABLE_OFFSET=0x8000 -CONFIG_PARTITION_TABLE_MD5=y -# end of Partition Table - -# -# Compiler options -# -CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y -# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set -# CONFIG_COMPILER_OPTIMIZATION_PERF is not set -# CONFIG_COMPILER_OPTIMIZATION_NONE is not set -CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y -# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set -# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set -CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y -CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 -# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set -CONFIG_COMPILER_HIDE_PATHS_MACROS=y -# CONFIG_COMPILER_CXX_EXCEPTIONS is not set -# CONFIG_COMPILER_CXX_RTTI is not set -CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y -# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set -# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set -# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set -# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set -# CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set -# CONFIG_COMPILER_DUMP_RTL_FILES is not set -# end of Compiler options - -# -# Component config -# - -# -# Application Level Tracing -# -# CONFIG_APPTRACE_DEST_JTAG is not set -CONFIG_APPTRACE_DEST_NONE=y -# CONFIG_APPTRACE_DEST_UART1 is not set -# CONFIG_APPTRACE_DEST_UART2 is not set -CONFIG_APPTRACE_DEST_UART_NONE=y -CONFIG_APPTRACE_UART_TASK_PRIO=1 -CONFIG_APPTRACE_LOCK_ENABLE=y -# end of Application Level Tracing - -# -# Bluetooth -# -# CONFIG_BT_ENABLED is not set -# end of Bluetooth - -# -# Driver Configurations -# - -# -# Legacy ADC Configuration -# -CONFIG_ADC_DISABLE_DAC=y -# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set - -# -# Legacy ADC Calibration Configuration -# -CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y -CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y -CONFIG_ADC_CAL_LUT_ENABLE=y -# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set -# end of Legacy ADC Calibration Configuration -# end of Legacy ADC Configuration - -# -# SPI Configuration -# -# CONFIG_SPI_MASTER_IN_IRAM is not set -CONFIG_SPI_MASTER_ISR_IN_IRAM=y -# CONFIG_SPI_SLAVE_IN_IRAM is not set -CONFIG_SPI_SLAVE_ISR_IN_IRAM=y -# end of SPI Configuration - -# -# TWAI Configuration -# -# CONFIG_TWAI_ISR_IN_IRAM is not set -CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC=y -CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST=y -CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID=y -CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT=y -CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y -# end of TWAI Configuration - -# -# UART Configuration -# -# CONFIG_UART_ISR_IN_IRAM is not set -# end of UART Configuration - -# -# GPIO Configuration -# -# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set -# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set -# end of GPIO Configuration - -# -# Sigma Delta Modulator Configuration -# -# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set -# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_SDM_ENABLE_DEBUG_LOG is not set -# end of Sigma Delta Modulator Configuration - -# -# GPTimer Configuration -# -# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set -# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set -# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set -# end of GPTimer Configuration - -# -# PCNT Configuration -# -# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set -# CONFIG_PCNT_ISR_IRAM_SAFE is not set -# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set -# end of PCNT Configuration - -# -# RMT Configuration -# -# CONFIG_RMT_ISR_IRAM_SAFE is not set -# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_RMT_ENABLE_DEBUG_LOG is not set -# end of RMT Configuration - -# -# MCPWM Configuration -# -# CONFIG_MCPWM_ISR_IRAM_SAFE is not set -# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set -# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set -# end of MCPWM Configuration - -# -# I2S Configuration -# -# CONFIG_I2S_ISR_IRAM_SAFE is not set -# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_I2S_ENABLE_DEBUG_LOG is not set -# end of I2S Configuration - -# -# DAC Configuration -# -# CONFIG_DAC_CTRL_FUNC_IN_IRAM is not set -# CONFIG_DAC_ISR_IRAM_SAFE is not set -# CONFIG_DAC_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_DAC_ENABLE_DEBUG_LOG is not set -CONFIG_DAC_DMA_AUTO_16BIT_ALIGN=y -# end of DAC Configuration -# end of Driver Configurations - -# -# eFuse Bit Manager -# -# CONFIG_EFUSE_CUSTOM_TABLE is not set -# CONFIG_EFUSE_VIRTUAL is not set -# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set -CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y -# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set -CONFIG_EFUSE_MAX_BLK_LEN=192 -# end of eFuse Bit Manager - -# -# ESP-TLS -# -CONFIG_ESP_TLS_USING_MBEDTLS=y -# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set -# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set -# CONFIG_ESP_TLS_SERVER is not set -# CONFIG_ESP_TLS_PSK_VERIFICATION is not set -# CONFIG_ESP_TLS_INSECURE is not set -# end of ESP-TLS - -# -# ADC and ADC Calibration -# -# CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set -# CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set - -# -# ADC Calibration Configurations -# -CONFIG_ADC_CALI_EFUSE_TP_ENABLE=y -CONFIG_ADC_CALI_EFUSE_VREF_ENABLE=y -CONFIG_ADC_CALI_LUT_ENABLE=y -# end of ADC Calibration Configurations - -CONFIG_ADC_DISABLE_DAC_OUTPUT=y -# end of ADC and ADC Calibration - -# -# Wireless Coexistence -# -# end of Wireless Coexistence - -# -# Common ESP-related -# -CONFIG_ESP_ERR_TO_NAME_LOOKUP=y -# end of Common ESP-related - -# -# Ethernet -# -CONFIG_ETH_ENABLED=y -CONFIG_ETH_USE_ESP32_EMAC=y -CONFIG_ETH_PHY_INTERFACE_RMII=y -CONFIG_ETH_RMII_CLK_INPUT=y -# CONFIG_ETH_RMII_CLK_OUTPUT is not set -CONFIG_ETH_RMII_CLK_IN_GPIO=0 -CONFIG_ETH_DMA_BUFFER_SIZE=512 -CONFIG_ETH_DMA_RX_BUFFER_NUM=10 -CONFIG_ETH_DMA_TX_BUFFER_NUM=10 -CONFIG_ETH_USE_SPI_ETHERNET=y -# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set -# CONFIG_ETH_SPI_ETHERNET_W5500 is not set -# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set -# CONFIG_ETH_USE_OPENETH is not set -# CONFIG_ETH_TRANSMIT_MUTEX is not set -# end of Ethernet - -# -# Event Loop Library -# -# CONFIG_ESP_EVENT_LOOP_PROFILING is not set -CONFIG_ESP_EVENT_POST_FROM_ISR=y -CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y -# end of Event Loop Library - -# -# GDB Stub -# -# end of GDB Stub - -# -# ESP HTTP client -# -CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y -# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set -# CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set -# end of ESP HTTP client - -# -# HTTP Server -# -CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 -CONFIG_HTTPD_MAX_URI_LEN=512 -CONFIG_HTTPD_ERR_RESP_NO_DELAY=y -CONFIG_HTTPD_PURGE_BUF_LEN=32 -# CONFIG_HTTPD_LOG_PURGE_DATA is not set -# CONFIG_HTTPD_WS_SUPPORT is not set -# CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set -# end of HTTP Server - -# -# ESP HTTPS OTA -# -# CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set -# CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set -# end of ESP HTTPS OTA - -# -# ESP HTTPS server -# -# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set -# end of ESP HTTPS server - -# -# Hardware Settings -# - -# -# Chip revision -# -CONFIG_ESP32_REV_MIN_0=y -# CONFIG_ESP32_REV_MIN_1 is not set -# CONFIG_ESP32_REV_MIN_1_1 is not set -# CONFIG_ESP32_REV_MIN_2 is not set -# CONFIG_ESP32_REV_MIN_3 is not set -# CONFIG_ESP32_REV_MIN_3_1 is not set -CONFIG_ESP32_REV_MIN=0 -CONFIG_ESP32_REV_MIN_FULL=0 -CONFIG_ESP_REV_MIN_FULL=0 - -# -# Maximum Supported ESP32 Revision (Rev v3.99) -# -CONFIG_ESP32_REV_MAX_FULL=399 -CONFIG_ESP_REV_MAX_FULL=399 -# end of Chip revision - -# -# MAC Config -# -CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y -CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y -# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 -# CONFIG_ESP_MAC_IGNORE_MAC_CRC_ERROR is not set -# end of MAC Config - -# -# Sleep Config -# -# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set -CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y -# CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU is not set -CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y -# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set -CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000 -# end of Sleep Config - -# -# RTC Clock Config -# -CONFIG_RTC_CLK_SRC_INT_RC=y -# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set -# CONFIG_RTC_CLK_SRC_EXT_OSC is not set -# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set -CONFIG_RTC_CLK_CAL_CYCLES=1024 -# end of RTC Clock Config - -# -# Peripheral Control -# -CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y -# end of Peripheral Control - -# -# Main XTAL Config -# -# CONFIG_XTAL_FREQ_26 is not set -CONFIG_XTAL_FREQ_40=y -# CONFIG_XTAL_FREQ_AUTO is not set -CONFIG_XTAL_FREQ=40 -# end of Main XTAL Config -# end of Hardware Settings - -# -# LCD and Touch Panel -# - -# -# LCD Touch Drivers are maintained in the IDF Component Registry -# - -# -# LCD Peripheral Configuration -# -CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 -# CONFIG_LCD_ENABLE_DEBUG_LOG is not set -# end of LCD Peripheral Configuration -# end of LCD and Touch Panel - -# -# ESP NETIF Adapter -# -CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 -CONFIG_ESP_NETIF_TCPIP_LWIP=y -# CONFIG_ESP_NETIF_LOOPBACK is not set -CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y -# CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set -# CONFIG_ESP_NETIF_L2_TAP is not set -# CONFIG_ESP_NETIF_BRIDGE_EN is not set -# end of ESP NETIF Adapter - -# -# Partition API Configuration -# -# end of Partition API Configuration - -# -# PHY -# -CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP_PHY_MAX_TX_POWER=20 -# CONFIG_ESP_PHY_REDUCE_TX_POWER is not set -CONFIG_ESP_PHY_RF_CAL_PARTIAL=y -# CONFIG_ESP_PHY_RF_CAL_NONE is not set -# CONFIG_ESP_PHY_RF_CAL_FULL is not set -CONFIG_ESP_PHY_CALIBRATION_MODE=0 -# end of PHY - -# -# Power Management -# -# CONFIG_PM_ENABLE is not set -# end of Power Management - -# -# ESP PSRAM -# -# CONFIG_SPIRAM is not set -# end of ESP PSRAM - -# -# ESP Ringbuf -# -# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set -# end of ESP Ringbuf - -# -# ESP System Settings -# -# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set -CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y -# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240 is not set -CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160 - -# -# Memory -# -# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set - -# -# Non-backward compatible options -# -# CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM is not set -# end of Non-backward compatible options -# end of Memory - -# -# Trace memory -# -# CONFIG_ESP32_TRAX is not set -CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0 -# end of Trace memory - -# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set -CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y -# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set -# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set -# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set -CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0 - -# -# Memory protection -# -# end of Memory protection - -CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 -CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y -# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set -# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set -CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 -CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 -CONFIG_ESP_CONSOLE_UART_DEFAULT=y -# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set -# CONFIG_ESP_CONSOLE_NONE is not set -CONFIG_ESP_CONSOLE_UART=y -CONFIG_ESP_CONSOLE_MULTIPLE_UART=y -CONFIG_ESP_CONSOLE_UART_NUM=0 -CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 -CONFIG_ESP_INT_WDT=y -CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 -CONFIG_ESP_INT_WDT_CHECK_CPU1=y -CONFIG_ESP_TASK_WDT_EN=y -CONFIG_ESP_TASK_WDT_INIT=y -# CONFIG_ESP_TASK_WDT_PANIC is not set -CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -# CONFIG_ESP_PANIC_HANDLER_IRAM is not set -# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set -CONFIG_ESP_DEBUG_OCDAWARE=y -# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set -CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y - -# -# Brownout Detector -# -CONFIG_ESP_BROWNOUT_DET=y -CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0=y -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 is not set -CONFIG_ESP_BROWNOUT_DET_LVL=0 -# end of Brownout Detector - -# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set -CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y -# end of ESP System Settings - -# -# IPC (Inter-Processor Call) -# -CONFIG_ESP_IPC_TASK_STACK_SIZE=1024 -CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y -CONFIG_ESP_IPC_ISR_ENABLE=y -# end of IPC (Inter-Processor Call) - -# -# High resolution timer (esp_timer) -# -# CONFIG_ESP_TIMER_PROFILING is not set -CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y -CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y -CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 -CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 -# CONFIG_ESP_TIMER_SHOW_EXPERIMENTAL is not set -CONFIG_ESP_TIMER_TASK_AFFINITY=0x0 -CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0=y -CONFIG_ESP_TIMER_ISR_AFFINITY=0x1 -CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0=y -# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set -CONFIG_ESP_TIMER_IMPL_TG0_LAC=y -# end of High resolution timer (esp_timer) - -# -# Wi-Fi -# -CONFIG_ESP_WIFI_ENABLED=y -CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10 -CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32 -# CONFIG_ESP_WIFI_STATIC_TX_BUFFER is not set -CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER=y -CONFIG_ESP_WIFI_TX_BUFFER_TYPE=1 -CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=32 -# CONFIG_ESP_WIFI_CSI_ENABLED is not set -CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y -CONFIG_ESP_WIFI_TX_BA_WIN=6 -CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP_WIFI_RX_BA_WIN=6 -CONFIG_ESP_WIFI_NVS_ENABLED=y -CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y -# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set -CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752 -CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32 -CONFIG_ESP_WIFI_IRAM_OPT=y -CONFIG_ESP_WIFI_RX_IRAM_OPT=y -CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=y -CONFIG_ESP_WIFI_ENABLE_SAE_PK=y -CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT=y -CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=y -# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set -CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=y -# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set -CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y -# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set -CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7 -# CONFIG_ESP_WIFI_NAN_ENABLE is not set -CONFIG_ESP_WIFI_MBEDTLS_CRYPTO=y -CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT=y -# CONFIG_ESP_WIFI_WAPI_PSK is not set -# CONFIG_ESP_WIFI_SUITE_B_192 is not set -# CONFIG_ESP_WIFI_11KV_SUPPORT is not set -# CONFIG_ESP_WIFI_MBO_SUPPORT is not set -# CONFIG_ESP_WIFI_DPP_SUPPORT is not set -# CONFIG_ESP_WIFI_11R_SUPPORT is not set -# CONFIG_ESP_WIFI_WPS_SOFTAP_REGISTRAR is not set - -# -# WPS Configuration Options -# -# CONFIG_ESP_WIFI_WPS_STRICT is not set -# CONFIG_ESP_WIFI_WPS_PASSPHRASE is not set -# end of WPS Configuration Options - -# CONFIG_ESP_WIFI_DEBUG_PRINT is not set -# CONFIG_ESP_WIFI_TESTING_OPTIONS is not set -# end of Wi-Fi - -# -# Core dump -# -# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set -# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set -CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y -# end of Core dump - -# -# FAT Filesystem support -# -CONFIG_FATFS_VOLUME_COUNT=2 -CONFIG_FATFS_LFN_NONE=y -# CONFIG_FATFS_LFN_HEAP is not set -# CONFIG_FATFS_LFN_STACK is not set -# CONFIG_FATFS_SECTOR_512 is not set -CONFIG_FATFS_SECTOR_4096=y -# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set -CONFIG_FATFS_CODEPAGE_437=y -# CONFIG_FATFS_CODEPAGE_720 is not set -# CONFIG_FATFS_CODEPAGE_737 is not set -# CONFIG_FATFS_CODEPAGE_771 is not set -# CONFIG_FATFS_CODEPAGE_775 is not set -# CONFIG_FATFS_CODEPAGE_850 is not set -# CONFIG_FATFS_CODEPAGE_852 is not set -# CONFIG_FATFS_CODEPAGE_855 is not set -# CONFIG_FATFS_CODEPAGE_857 is not set -# CONFIG_FATFS_CODEPAGE_860 is not set -# CONFIG_FATFS_CODEPAGE_861 is not set -# CONFIG_FATFS_CODEPAGE_862 is not set -# CONFIG_FATFS_CODEPAGE_863 is not set -# CONFIG_FATFS_CODEPAGE_864 is not set -# CONFIG_FATFS_CODEPAGE_865 is not set -# CONFIG_FATFS_CODEPAGE_866 is not set -# CONFIG_FATFS_CODEPAGE_869 is not set -# CONFIG_FATFS_CODEPAGE_932 is not set -# CONFIG_FATFS_CODEPAGE_936 is not set -# CONFIG_FATFS_CODEPAGE_949 is not set -# CONFIG_FATFS_CODEPAGE_950 is not set -CONFIG_FATFS_CODEPAGE=437 -CONFIG_FATFS_FS_LOCK=0 -CONFIG_FATFS_TIMEOUT_MS=10000 -CONFIG_FATFS_PER_FILE_CACHE=y -# CONFIG_FATFS_USE_FASTSEEK is not set -CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0 -# end of FAT Filesystem support - -# -# FreeRTOS -# - -# -# Kernel -# -# CONFIG_FREERTOS_SMP is not set -# CONFIG_FREERTOS_UNICORE is not set -CONFIG_FREERTOS_HZ=100 -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set -CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y -CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 -CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 -# CONFIG_FREERTOS_USE_IDLE_HOOK is not set -# CONFIG_FREERTOS_USE_TICK_HOOK is not set -CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 -# CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set -CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 -CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 -CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 -CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 -CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1 -# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set -# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set -# end of Kernel - -# -# Port -# -CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y -# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set -CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y -# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set -CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y -CONFIG_FREERTOS_ISR_STACKSIZE=1536 -CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y -# CONFIG_FREERTOS_FPU_IN_ISR is not set -CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y -CONFIG_FREERTOS_CORETIMER_0=y -# CONFIG_FREERTOS_CORETIMER_1 is not set -CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y -# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set -# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set -# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set -CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y -# end of Port - -CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF -CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y -CONFIG_FREERTOS_DEBUG_OCDAWARE=y -# end of FreeRTOS - -# -# Hardware Abstraction Layer (HAL) and Low Level (LL) -# -CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y -# CONFIG_HAL_ASSERTION_DISABLE is not set -# CONFIG_HAL_ASSERTION_SILENT is not set -# CONFIG_HAL_ASSERTION_ENABLE is not set -CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 -CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y -CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y -# end of Hardware Abstraction Layer (HAL) and Low Level (LL) - -# -# Heap memory debugging -# -CONFIG_HEAP_POISONING_DISABLED=y -# CONFIG_HEAP_POISONING_LIGHT is not set -# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set -CONFIG_HEAP_TRACING_OFF=y -# CONFIG_HEAP_TRACING_STANDALONE is not set -# CONFIG_HEAP_TRACING_TOHOST is not set -# CONFIG_HEAP_USE_HOOKS is not set -# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set -# CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH is not set -# end of Heap memory debugging - -CONFIG_IEEE802154_CCA_THRESHOLD=-60 -CONFIG_IEEE802154_PENDING_TABLE_SIZE=20 - -# -# Log output -# -# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set -# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set -# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set -CONFIG_LOG_DEFAULT_LEVEL_INFO=y -# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set -# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set -CONFIG_LOG_DEFAULT_LEVEL=3 -CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y -# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set -# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set -CONFIG_LOG_MAXIMUM_LEVEL=3 -CONFIG_LOG_COLORS=y -CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y -# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set -# end of Log output - -# -# LWIP -# -CONFIG_LWIP_LOCAL_HOSTNAME="espressif" -# CONFIG_LWIP_NETIF_API is not set -# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set -# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set -CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y -# CONFIG_LWIP_L2_TO_L3_COPY is not set -# CONFIG_LWIP_IRAM_OPTIMIZATION is not set -CONFIG_LWIP_TIMERS_ONDEMAND=y -CONFIG_LWIP_MAX_SOCKETS=10 -# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set -# CONFIG_LWIP_SO_LINGER is not set -CONFIG_LWIP_SO_REUSE=y -CONFIG_LWIP_SO_REUSE_RXTOALL=y -# CONFIG_LWIP_SO_RCVBUF is not set -# CONFIG_LWIP_NETBUF_RECVINFO is not set -CONFIG_LWIP_IP4_FRAG=y -CONFIG_LWIP_IP6_FRAG=y -# CONFIG_LWIP_IP4_REASSEMBLY is not set -# CONFIG_LWIP_IP6_REASSEMBLY is not set -CONFIG_LWIP_IP_REASS_MAX_PBUFS=10 -# CONFIG_LWIP_IP_FORWARD is not set -# CONFIG_LWIP_STATS is not set -CONFIG_LWIP_ESP_GRATUITOUS_ARP=y -CONFIG_LWIP_GARP_TMR_INTERVAL=60 -CONFIG_LWIP_ESP_MLDV6_REPORT=y -CONFIG_LWIP_MLDV6_TMR_INTERVAL=40 -CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 -CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y -# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set -CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y -# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set -CONFIG_LWIP_DHCP_OPTIONS_LEN=68 -CONFIG_LWIP_NUM_NETIF_CLIENT_DATA=0 -CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1 - -# -# DHCP server -# -CONFIG_LWIP_DHCPS=y -CONFIG_LWIP_DHCPS_LEASE_UNIT=60 -CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 -# end of DHCP server - -# CONFIG_LWIP_AUTOIP is not set -CONFIG_LWIP_IPV4=y -CONFIG_LWIP_IPV6=y -# CONFIG_LWIP_IPV6_AUTOCONFIG is not set -CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 -# CONFIG_LWIP_IPV6_FORWARD is not set -# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set -CONFIG_LWIP_NETIF_LOOPBACK=y -CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 - -# -# TCP -# -CONFIG_LWIP_MAX_ACTIVE_TCP=16 -CONFIG_LWIP_MAX_LISTENING_TCP=16 -CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y -CONFIG_LWIP_TCP_MAXRTX=12 -CONFIG_LWIP_TCP_SYNMAXRTX=12 -CONFIG_LWIP_TCP_MSS=1440 -CONFIG_LWIP_TCP_TMR_INTERVAL=250 -CONFIG_LWIP_TCP_MSL=60000 -CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000 -CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 -CONFIG_LWIP_TCP_WND_DEFAULT=5744 -CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 -CONFIG_LWIP_TCP_QUEUE_OOSEQ=y -# CONFIG_LWIP_TCP_SACK_OUT is not set -CONFIG_LWIP_TCP_OVERSIZE_MSS=y -# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set -CONFIG_LWIP_TCP_RTO_TIME=1500 -# end of TCP - -# -# UDP -# -CONFIG_LWIP_MAX_UDP_PCBS=16 -CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 -# end of UDP - -# -# Checksums -# -# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set -# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set -CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y -# end of Checksums - -CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set -CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_LWIP_PPP_SUPPORT is not set -CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 -CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 -# CONFIG_LWIP_SLIP_SUPPORT is not set - -# -# ICMP -# -CONFIG_LWIP_ICMP=y -# CONFIG_LWIP_MULTICAST_PING is not set -# CONFIG_LWIP_BROADCAST_PING is not set -# end of ICMP - -# -# LWIP RAW API -# -CONFIG_LWIP_MAX_RAW_PCBS=16 -# end of LWIP RAW API - -# -# SNTP -# -CONFIG_LWIP_SNTP_MAX_SERVERS=1 -# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set -CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 -# end of SNTP - -CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7 -CONFIG_LWIP_ESP_LWIP_ASSERT=y - -# -# Hooks -# -# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set -CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y -# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set -CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y -# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set -# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set -CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y -# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set -# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set -CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y -# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT is not set -# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM is not set -CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y -# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set -# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set -CONFIG_LWIP_HOOK_IP6_INPUT_NONE=y -# CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT is not set -# CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set -# end of Hooks - -# CONFIG_LWIP_DEBUG is not set -# end of LWIP - -# -# mbedTLS -# -CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y -# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set -# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set -CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y -CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 -CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 -# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set -# CONFIG_MBEDTLS_DEBUG is not set - -# -# mbedTLS v3.x related -# -# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set -# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set -# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set -# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set -CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y -CONFIG_MBEDTLS_PKCS7_C=y -# end of mbedTLS v3.x related - -# -# Certificate Bundle -# -CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y -CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y -# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set -# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set -# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set -CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200 -# end of Certificate Bundle - -# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set -# CONFIG_MBEDTLS_CMAC_C is not set -CONFIG_MBEDTLS_HARDWARE_AES=y -CONFIG_MBEDTLS_HARDWARE_MPI=y -CONFIG_MBEDTLS_HARDWARE_SHA=y -CONFIG_MBEDTLS_ROM_MD5=y -# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set -# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set -CONFIG_MBEDTLS_HAVE_TIME=y -# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set -# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set -CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y -CONFIG_MBEDTLS_SHA512_C=y -CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y -# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set -# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set -# CONFIG_MBEDTLS_TLS_DISABLED is not set -CONFIG_MBEDTLS_TLS_SERVER=y -CONFIG_MBEDTLS_TLS_CLIENT=y -CONFIG_MBEDTLS_TLS_ENABLED=y - -# -# TLS Key Exchange Methods -# -# CONFIG_MBEDTLS_PSK_MODES is not set -CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y -# end of TLS Key Exchange Methods - -CONFIG_MBEDTLS_SSL_RENEGOTIATION=y -CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y -# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set -# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set -CONFIG_MBEDTLS_SSL_ALPN=y -CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y -CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y - -# -# Symmetric Ciphers -# -CONFIG_MBEDTLS_AES_C=y -# CONFIG_MBEDTLS_CAMELLIA_C is not set -# CONFIG_MBEDTLS_DES_C is not set -# CONFIG_MBEDTLS_BLOWFISH_C is not set -# CONFIG_MBEDTLS_XTEA_C is not set -CONFIG_MBEDTLS_CCM_C=y -CONFIG_MBEDTLS_GCM_C=y -# CONFIG_MBEDTLS_NIST_KW_C is not set -# end of Symmetric Ciphers - -# CONFIG_MBEDTLS_RIPEMD160_C is not set - -# -# Certificates -# -CONFIG_MBEDTLS_PEM_PARSE_C=y -CONFIG_MBEDTLS_PEM_WRITE_C=y -CONFIG_MBEDTLS_X509_CRL_PARSE_C=y -CONFIG_MBEDTLS_X509_CSR_PARSE_C=y -# end of Certificates - -CONFIG_MBEDTLS_ECP_C=y -# CONFIG_MBEDTLS_DHM_C is not set -CONFIG_MBEDTLS_ECDH_C=y -CONFIG_MBEDTLS_ECDSA_C=y -# CONFIG_MBEDTLS_ECJPAKE_C is not set -CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y -CONFIG_MBEDTLS_ECP_NIST_OPTIM=y -# CONFIG_MBEDTLS_POLY1305_C is not set -# CONFIG_MBEDTLS_CHACHA20_C is not set -# CONFIG_MBEDTLS_HKDF_C is not set -# CONFIG_MBEDTLS_THREADING_C is not set -# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set -# CONFIG_MBEDTLS_SECURITY_RISKS is not set -# end of mbedTLS - -# -# ESP-MQTT Configurations -# -CONFIG_MQTT_PROTOCOL_311=y -# CONFIG_MQTT_PROTOCOL_5 is not set -CONFIG_MQTT_TRANSPORT_SSL=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y -# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set -# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set -# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set -# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set -# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set -# CONFIG_MQTT_CUSTOM_OUTBOX is not set -# end of ESP-MQTT Configurations - -# -# Newlib -# -CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y -# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set -# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set -# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set -# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set -CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y -# CONFIG_NEWLIB_NANO_FORMAT is not set -CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y -# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set -# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set -# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set -# end of Newlib - -# -# NVS -# -# CONFIG_NVS_ASSERT_ERROR_CHECK is not set -# end of NVS - -# -# OpenThread -# -# CONFIG_OPENTHREAD_ENABLED is not set - -# -# Thread Operational Dataset -# -CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP" -CONFIG_OPENTHREAD_NETWORK_CHANNEL=15 -CONFIG_OPENTHREAD_NETWORK_PANID=0x1234 -CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe" -CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff" -CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53" -# end of Thread Operational Dataset -# end of OpenThread - -# -# Protocomm -# -CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y -CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y -CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y -# end of Protocomm - -# -# PThreads -# -CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 -CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 -CONFIG_PTHREAD_STACK_MIN=768 -CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y -# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set -# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set -CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 -CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" -# end of PThreads - -# -# MMU Config -# -CONFIG_MMU_PAGE_SIZE_64KB=y -CONFIG_MMU_PAGE_MODE="64KB" -CONFIG_MMU_PAGE_SIZE=0x10000 -# end of MMU Config - -# -# SPI Flash driver -# -# CONFIG_SPI_FLASH_VERIFY_WRITE is not set -# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set -CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y -CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y -# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set -# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set -# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set -# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set -CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y -CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 -CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 -CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 -# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set -# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set -# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set - -# -# SPI Flash behavior when brownout -# -CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y -CONFIG_SPI_FLASH_BROWNOUT_RESET=y -# end of SPI Flash behavior when brownout - -# -# Auto-detect flash chips -# -CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED=y -CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED=y -CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED=y -CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED=y -CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED=y -CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y -# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set -# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set -# end of Auto-detect flash chips - -CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y -# end of SPI Flash driver - -# -# SPIFFS Configuration -# -CONFIG_SPIFFS_MAX_PARTITIONS=3 - -# -# SPIFFS Cache Configuration -# -CONFIG_SPIFFS_CACHE=y -CONFIG_SPIFFS_CACHE_WR=y -# CONFIG_SPIFFS_CACHE_STATS is not set -# end of SPIFFS Cache Configuration - -CONFIG_SPIFFS_PAGE_CHECK=y -CONFIG_SPIFFS_GC_MAX_RUNS=10 -# CONFIG_SPIFFS_GC_STATS is not set -CONFIG_SPIFFS_PAGE_SIZE=256 -CONFIG_SPIFFS_OBJ_NAME_LEN=32 -# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set -CONFIG_SPIFFS_USE_MAGIC=y -CONFIG_SPIFFS_USE_MAGIC_LENGTH=y -CONFIG_SPIFFS_META_LENGTH=4 -CONFIG_SPIFFS_USE_MTIME=y - -# -# Debug Configuration -# -# CONFIG_SPIFFS_DBG is not set -# CONFIG_SPIFFS_API_DBG is not set -# CONFIG_SPIFFS_GC_DBG is not set -# CONFIG_SPIFFS_CACHE_DBG is not set -# CONFIG_SPIFFS_CHECK_DBG is not set -# CONFIG_SPIFFS_TEST_VISUALISATION is not set -# end of Debug Configuration -# end of SPIFFS Configuration - -# -# TCP Transport -# - -# -# Websocket -# -CONFIG_WS_TRANSPORT=y -CONFIG_WS_BUFFER_SIZE=1024 -# CONFIG_WS_DYNAMIC_BUFFER is not set -# end of Websocket -# end of TCP Transport - -# -# Ultra Low Power (ULP) Co-processor -# -# CONFIG_ULP_COPROC_ENABLED is not set -# end of Ultra Low Power (ULP) Co-processor - -# -# Unity unit testing library -# -CONFIG_UNITY_ENABLE_FLOAT=y -CONFIG_UNITY_ENABLE_DOUBLE=y -# CONFIG_UNITY_ENABLE_64BIT is not set -# CONFIG_UNITY_ENABLE_COLOR is not set -CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y -# CONFIG_UNITY_ENABLE_FIXTURE is not set -# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set -# end of Unity unit testing library - -# -# Root Hub configuration -# -# end of Root Hub configuration - -# -# Virtual file system -# -CONFIG_VFS_SUPPORT_IO=y -CONFIG_VFS_SUPPORT_DIR=y -CONFIG_VFS_SUPPORT_SELECT=y -CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_VFS_SUPPORT_TERMIOS=y -CONFIG_VFS_MAX_COUNT=8 - -# -# Host File System I/O (Semihosting) -# -CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -# end of Host File System I/O (Semihosting) -# end of Virtual file system - -# -# Wear Levelling -# -# CONFIG_WL_SECTOR_SIZE_512 is not set -CONFIG_WL_SECTOR_SIZE_4096=y -CONFIG_WL_SECTOR_SIZE=4096 -# end of Wear Levelling - -# -# Wi-Fi Provisioning Manager -# -CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 -CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 -# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set -CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y -# CONFIG_WIFI_PROV_STA_FAST_SCAN is not set -# end of Wi-Fi Provisioning Manager - -# -# SRA Board Component Config -# - -# -# I2C -# -CONFIG_I2CDEV_TIMEOUT=1000 -# CONFIG_I2CDEV_NOLOCK is not set -# end of I2C - -# CONFIG_ENABLE_OLED is not set -CONFIG_WALL_E_LOGO_TEXT="Wall-E 2023" -CONFIG_MARIO_LOGO_TEXT="MARIO 2023" - -# -# Servo motor configuration -# - -# -# Servo A -# -CONFIG_SERVO_A_MIN_PULSEWIDTH=500 -CONFIG_SERVO_A_MAX_PULSEWIDTH=3000 -CONFIG_SERVO_A_MAX_DEGREE=180 -# end of Servo A - -# -# Servo B -# -CONFIG_SERVO_B_MIN_PULSEWIDTH=500 -CONFIG_SERVO_B_MAX_PULSEWIDTH=3000 -CONFIG_SERVO_B_MAX_DEGREE=180 -# end of Servo B - -# -# Servo C -# -CONFIG_SERVO_C_MIN_PULSEWIDTH=500 -CONFIG_SERVO_C_MAX_PULSEWIDTH=3000 -CONFIG_SERVO_C_MAX_DEGREE=180 -# end of Servo C - -# -# Servo D -# -CONFIG_SERVO_D_MIN_PULSEWIDTH=500 -CONFIG_SERVO_D_MAX_PULSEWIDTH=3000 -CONFIG_SERVO_D_MAX_DEGREE=180 -# end of Servo D -# end of Servo motor configuration - -CONFIG_NUMBER_OF_SAMPLES=64 -CONFIG_MPU_CALIBRATION_AVG_COUNT=100 -# end of SRA Board Component Config -# end of Component config - -# CONFIG_IDF_EXPERIMENTAL_FEATURES is not set - -# Deprecated options for backward compatibility -# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set -# CONFIG_NO_BLOBS is not set -# CONFIG_ESP32_NO_BLOBS is not set -# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set -# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set -CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y -# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set -CONFIG_LOG_BOOTLOADER_LEVEL=3 -# CONFIG_APP_ROLLBACK_ENABLE is not set -# CONFIG_FLASH_ENCRYPTION_ENABLED is not set -# CONFIG_FLASHMODE_QIO is not set -# CONFIG_FLASHMODE_QOUT is not set -CONFIG_FLASHMODE_DIO=y -# CONFIG_FLASHMODE_DOUT is not set -CONFIG_MONITOR_BAUD=115200 -CONFIG_OPTIMIZATION_LEVEL_DEBUG=y -CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y -# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set -# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set -CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y -# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set -# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set -CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2 -# CONFIG_CXX_EXCEPTIONS is not set -CONFIG_STACK_CHECK_NONE=y -# CONFIG_STACK_CHECK_NORM is not set -# CONFIG_STACK_CHECK_STRONG is not set -# CONFIG_STACK_CHECK_ALL is not set -# CONFIG_WARN_WRITE_STRINGS is not set -# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set -CONFIG_ESP32_APPTRACE_DEST_NONE=y -CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y -CONFIG_ADC2_DISABLE_DAC=y -# CONFIG_MCPWM_ISR_IN_IRAM is not set -# CONFIG_EVENT_LOOP_PROFILING is not set -CONFIG_POST_EVENTS_FROM_ISR=y -CONFIG_POST_EVENTS_FROM_IRAM_ISR=y -# CONFIG_OTA_ALLOW_HTTP is not set -# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set -CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y -CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4 -# CONFIG_ESP_SYSTEM_PD_FLASH is not set -CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 -CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y -CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y -# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set -# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set -# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set -CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024 -# CONFIG_ESP32_XTAL_FREQ_26 is not set -CONFIG_ESP32_XTAL_FREQ_40=y -# CONFIG_ESP32_XTAL_FREQ_AUTO is not set -CONFIG_ESP32_XTAL_FREQ=40 -CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP32_PHY_MAX_TX_POWER=20 -# CONFIG_REDUCE_PHY_TX_POWER is not set -# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set -# CONFIG_SPIRAM_SUPPORT is not set -# CONFIG_ESP32_SPIRAM_SUPPORT is not set -# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set -CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y -# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set -CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160 -CONFIG_TRACEMEM_RESERVE_DRAM=0x0 -# CONFIG_ESP32_PANIC_PRINT_HALT is not set -CONFIG_ESP32_PANIC_PRINT_REBOOT=y -# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set -# CONFIG_ESP32_PANIC_GDBSTUB is not set -CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_MAIN_TASK_STACK_SIZE=3584 -CONFIG_CONSOLE_UART_DEFAULT=y -# CONFIG_CONSOLE_UART_CUSTOM is not set -# CONFIG_CONSOLE_UART_NONE is not set -# CONFIG_ESP_CONSOLE_UART_NONE is not set -CONFIG_CONSOLE_UART=y -CONFIG_CONSOLE_UART_NUM=0 -CONFIG_CONSOLE_UART_BAUDRATE=115200 -CONFIG_INT_WDT=y -CONFIG_INT_WDT_TIMEOUT_MS=300 -CONFIG_INT_WDT_CHECK_CPU1=y -CONFIG_TASK_WDT=y -CONFIG_ESP_TASK_WDT=y -# CONFIG_TASK_WDT_PANIC is not set -CONFIG_TASK_WDT_TIMEOUT_S=5 -CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set -CONFIG_ESP32_DEBUG_OCDAWARE=y -CONFIG_BROWNOUT_DET=y -CONFIG_ESP32_BROWNOUT_DET=y -CONFIG_BROWNOUT_DET_LVL_SEL_0=y -CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y -# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set -CONFIG_BROWNOUT_DET_LVL=0 -CONFIG_ESP32_BROWNOUT_DET_LVL=0 -# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set -CONFIG_IPC_TASK_STACK_SIZE=1024 -CONFIG_TIMER_TASK_STACK_SIZE=3584 -CONFIG_ESP32_WIFI_ENABLED=y -CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 -CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y -CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_CSI_ENABLED is not set -CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y -CONFIG_ESP32_WIFI_TX_BA_WIN=6 -CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP32_WIFI_RX_BA_WIN=6 -CONFIG_ESP32_WIFI_RX_BA_WIN=6 -CONFIG_ESP32_WIFI_NVS_ENABLED=y -CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y -# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set -CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 -CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 -CONFIG_ESP32_WIFI_IRAM_OPT=y -CONFIG_ESP32_WIFI_RX_IRAM_OPT=y -CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y -CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA=y -CONFIG_WPA_MBEDTLS_CRYPTO=y -CONFIG_WPA_MBEDTLS_TLS_CLIENT=y -# CONFIG_WPA_WAPI_PSK is not set -# CONFIG_WPA_SUITE_B_192 is not set -# CONFIG_WPA_11KV_SUPPORT is not set -# CONFIG_WPA_MBO_SUPPORT is not set -# CONFIG_WPA_DPP_SUPPORT is not set -# CONFIG_WPA_11R_SUPPORT is not set -# CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set -# CONFIG_WPA_WPS_STRICT is not set -# CONFIG_WPA_DEBUG_PRINT is not set -# CONFIG_WPA_TESTING_OPTIONS is not set -# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set -# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set -CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y -CONFIG_TIMER_TASK_PRIORITY=1 -CONFIG_TIMER_TASK_STACK_DEPTH=2048 -CONFIG_TIMER_QUEUE_LENGTH=10 -# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set -# CONFIG_HAL_ASSERTION_SILIENT is not set -# CONFIG_L2_TO_L3_COPY is not set -CONFIG_ESP_GRATUITOUS_ARP=y -CONFIG_GARP_TMR_INTERVAL=60 -CONFIG_TCPIP_RECVMBOX_SIZE=32 -CONFIG_TCP_MAXRTX=12 -CONFIG_TCP_SYNMAXRTX=12 -CONFIG_TCP_MSS=1440 -CONFIG_TCP_MSL=60000 -CONFIG_TCP_SND_BUF_DEFAULT=5744 -CONFIG_TCP_WND_DEFAULT=5744 -CONFIG_TCP_RECVMBOX_SIZE=6 -CONFIG_TCP_QUEUE_OOSEQ=y -CONFIG_TCP_OVERSIZE_MSS=y -# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_TCP_OVERSIZE_DISABLE is not set -CONFIG_UDP_RECVMBOX_SIZE=6 -CONFIG_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set -# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set -CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_PPP_SUPPORT is not set -CONFIG_ESP32_TIME_SYSCALL_USE_RTC_HRT=y -CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y -# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_HRT is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set -CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 -CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 -CONFIG_ESP32_PTHREAD_STACK_MIN=768 -CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y -# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set -# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set -CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 -CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" -CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y -# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set -# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set -# CONFIG_ESP32_ULP_COPROC_ENABLED is not set -CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_SUPPORT_TERMIOS=y -CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -# End of deprecated options diff --git a/examples/motor_driver_normal/sdkconfig b/examples/motor_driver_normal/sdkconfig deleted file mode 100644 index ff31a74..0000000 --- a/examples/motor_driver_normal/sdkconfig +++ /dev/null @@ -1,1858 +0,0 @@ -# -# Automatically generated file. DO NOT EDIT. -# Espressif IoT Development Framework (ESP-IDF) 5.1.1 Project Configuration -# -CONFIG_SOC_BROWNOUT_RESET_SUPPORTED="Not determined" -CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED="Not determined" -CONFIG_SOC_DPORT_WORKAROUND="Not determined" -CONFIG_SOC_CAPS_ECO_VER_MAX=301 -CONFIG_SOC_ADC_SUPPORTED=y -CONFIG_SOC_DAC_SUPPORTED=y -CONFIG_SOC_UART_SUPPORTED=y -CONFIG_SOC_MCPWM_SUPPORTED=y -CONFIG_SOC_GPTIMER_SUPPORTED=y -CONFIG_SOC_SDMMC_HOST_SUPPORTED=y -CONFIG_SOC_BT_SUPPORTED=y -CONFIG_SOC_PCNT_SUPPORTED=y -CONFIG_SOC_WIFI_SUPPORTED=y -CONFIG_SOC_SDIO_SLAVE_SUPPORTED=y -CONFIG_SOC_TWAI_SUPPORTED=y -CONFIG_SOC_EMAC_SUPPORTED=y -CONFIG_SOC_ULP_SUPPORTED=y -CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y -CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y -CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y -CONFIG_SOC_RTC_MEM_SUPPORTED=y -CONFIG_SOC_I2S_SUPPORTED=y -CONFIG_SOC_RMT_SUPPORTED=y -CONFIG_SOC_SDM_SUPPORTED=y -CONFIG_SOC_GPSPI_SUPPORTED=y -CONFIG_SOC_LEDC_SUPPORTED=y -CONFIG_SOC_I2C_SUPPORTED=y -CONFIG_SOC_SUPPORT_COEXISTENCE=y -CONFIG_SOC_AES_SUPPORTED=y -CONFIG_SOC_MPI_SUPPORTED=y -CONFIG_SOC_SHA_SUPPORTED=y -CONFIG_SOC_FLASH_ENC_SUPPORTED=y -CONFIG_SOC_SECURE_BOOT_SUPPORTED=y -CONFIG_SOC_TOUCH_SENSOR_SUPPORTED=y -CONFIG_SOC_BOD_SUPPORTED=y -CONFIG_SOC_ULP_FSM_SUPPORTED=y -CONFIG_SOC_DPORT_WORKAROUND_DIS_INTERRUPT_LVL=5 -CONFIG_SOC_XTAL_SUPPORT_26M=y -CONFIG_SOC_XTAL_SUPPORT_40M=y -CONFIG_SOC_XTAL_SUPPORT_AUTO_DETECT=y -CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y -CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y -CONFIG_SOC_ADC_DMA_SUPPORTED=y -CONFIG_SOC_ADC_PERIPH_NUM=2 -CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10 -CONFIG_SOC_ADC_ATTEN_NUM=4 -CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2 -CONFIG_SOC_ADC_PATT_LEN_MAX=16 -CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=9 -CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12 -CONFIG_SOC_ADC_DIGI_RESULT_BYTES=2 -CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV=4 -CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=2 -CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=20 -CONFIG_SOC_ADC_RTC_MIN_BITWIDTH=9 -CONFIG_SOC_ADC_RTC_MAX_BITWIDTH=12 -CONFIG_SOC_SHARED_IDCACHE_SUPPORTED=y -CONFIG_SOC_IDCACHE_PER_CORE=y -CONFIG_SOC_CPU_CORES_NUM=2 -CONFIG_SOC_CPU_INTR_NUM=32 -CONFIG_SOC_CPU_HAS_FPU=y -CONFIG_SOC_CPU_BREAKPOINTS_NUM=2 -CONFIG_SOC_CPU_WATCHPOINTS_NUM=2 -CONFIG_SOC_CPU_WATCHPOINT_SIZE=64 -CONFIG_SOC_DAC_CHAN_NUM=2 -CONFIG_SOC_DAC_RESOLUTION=8 -CONFIG_SOC_DAC_DMA_16BIT_ALIGN=y -CONFIG_SOC_GPIO_PORT=1 -CONFIG_SOC_GPIO_PIN_COUNT=40 -CONFIG_SOC_GPIO_VALID_GPIO_MASK=0xFFFFFFFFFF -CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK=0xEF0FEA -CONFIG_SOC_I2C_NUM=2 -CONFIG_SOC_I2C_FIFO_LEN=32 -CONFIG_SOC_I2C_CMD_REG_NUM=16 -CONFIG_SOC_I2C_SUPPORT_SLAVE=y -CONFIG_SOC_I2C_SUPPORT_APB=y -CONFIG_SOC_I2S_NUM=2 -CONFIG_SOC_I2S_HW_VERSION_1=y -CONFIG_SOC_I2S_SUPPORTS_APLL=y -CONFIG_SOC_I2S_SUPPORTS_PLL_F160M=y -CONFIG_SOC_I2S_SUPPORTS_PDM=y -CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y -CONFIG_SOC_I2S_PDM_MAX_TX_LINES=1 -CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y -CONFIG_SOC_I2S_PDM_MAX_RX_LINES=1 -CONFIG_SOC_I2S_SUPPORTS_ADC_DAC=y -CONFIG_SOC_I2S_SUPPORTS_ADC=y -CONFIG_SOC_I2S_SUPPORTS_DAC=y -CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA=y -CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD=y -CONFIG_SOC_I2S_LCD_I80_VARIANT=y -CONFIG_SOC_LCD_I80_SUPPORTED=y -CONFIG_SOC_LCD_I80_BUSES=2 -CONFIG_SOC_LCD_I80_BUS_WIDTH=24 -CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX=y -CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK=y -CONFIG_SOC_LEDC_SUPPORT_REF_TICK=y -CONFIG_SOC_LEDC_SUPPORT_HS_MODE=y -CONFIG_SOC_LEDC_CHANNEL_NUM=8 -CONFIG_SOC_LEDC_TIMER_BIT_WIDTH=20 -CONFIG_SOC_MCPWM_GROUPS=2 -CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3 -CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3 -CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3 -CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y -CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3 -CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3 -CONFIG_SOC_MMU_PERIPH_NUM=2 -CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM=3 -CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000 -CONFIG_SOC_MPU_REGIONS_MAX_NUM=8 -CONFIG_SOC_PCNT_GROUPS=1 -CONFIG_SOC_PCNT_UNITS_PER_GROUP=8 -CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2 -CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2 -CONFIG_SOC_RMT_GROUPS=1 -CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=8 -CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=8 -CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8 -CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=64 -CONFIG_SOC_RMT_SUPPORT_REF_TICK=y -CONFIG_SOC_RMT_SUPPORT_APB=y -CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT=y -CONFIG_SOC_RTCIO_PIN_COUNT=18 -CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y -CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y -CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y -CONFIG_SOC_SDM_GROUPS=1 -CONFIG_SOC_SDM_CHANNELS_PER_GROUP=8 -CONFIG_SOC_SDM_CLK_SUPPORT_APB=y -CONFIG_SOC_SPI_HD_BOTH_INOUT_SUPPORTED=y -CONFIG_SOC_SPI_AS_CS_SUPPORTED=y -CONFIG_SOC_SPI_PERIPH_NUM=3 -CONFIG_SOC_SPI_DMA_CHAN_NUM=2 -CONFIG_SOC_SPI_MAX_CS_NUM=3 -CONFIG_SOC_SPI_SUPPORT_CLK_APB=y -CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64 -CONFIG_SOC_SPI_MAX_PRE_DIVIDER=8192 -CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED=y -CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED=y -CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED=y -CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED=y -CONFIG_SOC_TIMER_GROUPS=2 -CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2 -CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=64 -CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4 -CONFIG_SOC_TIMER_GROUP_SUPPORT_APB=y -CONFIG_SOC_TOUCH_VERSION_1=y -CONFIG_SOC_TOUCH_SENSOR_NUM=10 -CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX=0xFF -CONFIG_SOC_TWAI_CONTROLLER_NUM=1 -CONFIG_SOC_TWAI_BRP_MIN=2 -CONFIG_SOC_TWAI_CLK_SUPPORT_APB=y -CONFIG_SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT=y -CONFIG_SOC_UART_NUM=3 -CONFIG_SOC_UART_SUPPORT_APB_CLK=y -CONFIG_SOC_UART_SUPPORT_REF_TICK=y -CONFIG_SOC_UART_FIFO_LEN=128 -CONFIG_SOC_UART_BITRATE_MAX=5000000 -CONFIG_SOC_SPIRAM_SUPPORTED=y -CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE=y -CONFIG_SOC_SHA_SUPPORT_PARALLEL_ENG=y -CONFIG_SOC_SHA_SUPPORT_SHA1=y -CONFIG_SOC_SHA_SUPPORT_SHA256=y -CONFIG_SOC_SHA_SUPPORT_SHA384=y -CONFIG_SOC_SHA_SUPPORT_SHA512=y -CONFIG_SOC_RSA_MAX_BIT_LEN=4096 -CONFIG_SOC_AES_SUPPORT_AES_128=y -CONFIG_SOC_AES_SUPPORT_AES_192=y -CONFIG_SOC_AES_SUPPORT_AES_256=y -CONFIG_SOC_SECURE_BOOT_V1=y -CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=y -CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32 -CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21 -CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD=y -CONFIG_SOC_PM_SUPPORT_RTC_FAST_MEM_PD=y -CONFIG_SOC_PM_SUPPORT_RTC_SLOW_MEM_PD=y -CONFIG_SOC_PM_SUPPORT_RC_FAST_PD=y -CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD=y -CONFIG_SOC_PM_SUPPORT_MODEM_PD=y -CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED=y -CONFIG_SOC_CLK_APLL_SUPPORTED=y -CONFIG_SOC_APLL_MULTIPLIER_OUT_MIN_HZ=350000000 -CONFIG_SOC_APLL_MULTIPLIER_OUT_MAX_HZ=500000000 -CONFIG_SOC_APLL_MIN_HZ=5303031 -CONFIG_SOC_APLL_MAX_HZ=125000000 -CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED=y -CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256=y -CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION=y -CONFIG_SOC_CLK_XTAL32K_SUPPORTED=y -CONFIG_SOC_SDMMC_USE_IOMUX=y -CONFIG_SOC_SDMMC_NUM_SLOTS=2 -CONFIG_SOC_WIFI_WAPI_SUPPORT=y -CONFIG_SOC_WIFI_CSI_SUPPORT=y -CONFIG_SOC_WIFI_MESH_SUPPORT=y -CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW=y -CONFIG_SOC_WIFI_NAN_SUPPORT=y -CONFIG_SOC_BLE_SUPPORTED=y -CONFIG_SOC_BLE_MESH_SUPPORTED=y -CONFIG_SOC_BT_CLASSIC_SUPPORTED=y -CONFIG_SOC_BLUFI_SUPPORTED=y -CONFIG_SOC_ULP_HAS_ADC=y -CONFIG_IDF_CMAKE=y -CONFIG_IDF_TARGET_ARCH_XTENSA=y -CONFIG_IDF_TARGET_ARCH="xtensa" -CONFIG_IDF_TARGET="esp32" -CONFIG_IDF_TARGET_ESP32=y -CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000 - -# -# Build type -# -CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y -# CONFIG_APP_BUILD_TYPE_RAM is not set -CONFIG_APP_BUILD_GENERATE_BINARIES=y -CONFIG_APP_BUILD_BOOTLOADER=y -CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y -# CONFIG_APP_REPRODUCIBLE_BUILD is not set -# CONFIG_APP_NO_BLOBS is not set -# CONFIG_APP_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set -# CONFIG_APP_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set -# end of Build type - -# -# Bootloader config -# -CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000 -CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set -CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y -# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set -CONFIG_BOOTLOADER_LOG_LEVEL=3 -# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set -CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y -# CONFIG_BOOTLOADER_FACTORY_RESET is not set -# CONFIG_BOOTLOADER_APP_TEST is not set -CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE=y -CONFIG_BOOTLOADER_WDT_ENABLE=y -# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set -CONFIG_BOOTLOADER_WDT_TIME_MS=9000 -# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set -CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 -# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set -CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y -# end of Bootloader config - -# -# Security features -# -CONFIG_SECURE_BOOT_V1_SUPPORTED=y -# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set -# CONFIG_SECURE_BOOT is not set -# CONFIG_SECURE_FLASH_ENC_ENABLED is not set -# end of Security features - -# -# Application manager -# -CONFIG_APP_COMPILE_TIME_DATE=y -# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set -# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set -# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set -CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 -# end of Application manager - -CONFIG_ESP_ROM_HAS_CRC_LE=y -CONFIG_ESP_ROM_HAS_CRC_BE=y -CONFIG_ESP_ROM_HAS_MZ_CRC32=y -CONFIG_ESP_ROM_HAS_JPEG_DECODE=y -CONFIG_ESP_ROM_HAS_UART_BUF_SWITCH=y -CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND=y -CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT=y - -# -# Serial flasher config -# -# CONFIG_ESPTOOLPY_NO_STUB is not set -# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set -# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set -CONFIG_ESPTOOLPY_FLASHMODE_DIO=y -# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set -CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y -CONFIG_ESPTOOLPY_FLASHMODE="dio" -# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set -CONFIG_ESPTOOLPY_FLASHFREQ_40M=y -# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set -# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set -CONFIG_ESPTOOLPY_FLASHFREQ="40m" -# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set -CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y -# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_32MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_64MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_128MB is not set -CONFIG_ESPTOOLPY_FLASHSIZE="2MB" -# CONFIG_ESPTOOLPY_HEADER_FLASHSIZE_UPDATE is not set -CONFIG_ESPTOOLPY_BEFORE_RESET=y -# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set -CONFIG_ESPTOOLPY_BEFORE="default_reset" -CONFIG_ESPTOOLPY_AFTER_RESET=y -# CONFIG_ESPTOOLPY_AFTER_NORESET is not set -CONFIG_ESPTOOLPY_AFTER="hard_reset" -CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 -# end of Serial flasher config - -# -# Partition Table -# -CONFIG_PARTITION_TABLE_SINGLE_APP=y -# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set -# CONFIG_PARTITION_TABLE_TWO_OTA is not set -# CONFIG_PARTITION_TABLE_CUSTOM is not set -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" -CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv" -CONFIG_PARTITION_TABLE_OFFSET=0x8000 -CONFIG_PARTITION_TABLE_MD5=y -# end of Partition Table - -# -# Compiler options -# -CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y -# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set -# CONFIG_COMPILER_OPTIMIZATION_PERF is not set -# CONFIG_COMPILER_OPTIMIZATION_NONE is not set -CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y -# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set -# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set -CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB=y -CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 -# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set -CONFIG_COMPILER_HIDE_PATHS_MACROS=y -# CONFIG_COMPILER_CXX_EXCEPTIONS is not set -# CONFIG_COMPILER_CXX_RTTI is not set -CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y -# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set -# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set -# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set -# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set -# CONFIG_COMPILER_DISABLE_GCC12_WARNINGS is not set -# CONFIG_COMPILER_DUMP_RTL_FILES is not set -# end of Compiler options - -# -# Component config -# - -# -# Application Level Tracing -# -# CONFIG_APPTRACE_DEST_JTAG is not set -CONFIG_APPTRACE_DEST_NONE=y -# CONFIG_APPTRACE_DEST_UART1 is not set -# CONFIG_APPTRACE_DEST_UART2 is not set -CONFIG_APPTRACE_DEST_UART_NONE=y -CONFIG_APPTRACE_UART_TASK_PRIO=1 -CONFIG_APPTRACE_LOCK_ENABLE=y -# end of Application Level Tracing - -# -# Bluetooth -# -# CONFIG_BT_ENABLED is not set -# end of Bluetooth - -# -# Driver Configurations -# - -# -# Legacy ADC Configuration -# -CONFIG_ADC_DISABLE_DAC=y -# CONFIG_ADC_SUPPRESS_DEPRECATE_WARN is not set - -# -# Legacy ADC Calibration Configuration -# -CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y -CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y -CONFIG_ADC_CAL_LUT_ENABLE=y -# CONFIG_ADC_CALI_SUPPRESS_DEPRECATE_WARN is not set -# end of Legacy ADC Calibration Configuration -# end of Legacy ADC Configuration - -# -# SPI Configuration -# -# CONFIG_SPI_MASTER_IN_IRAM is not set -CONFIG_SPI_MASTER_ISR_IN_IRAM=y -# CONFIG_SPI_SLAVE_IN_IRAM is not set -CONFIG_SPI_SLAVE_ISR_IN_IRAM=y -# end of SPI Configuration - -# -# TWAI Configuration -# -# CONFIG_TWAI_ISR_IN_IRAM is not set -CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC=y -CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST=y -CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID=y -CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT=y -CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM=y -# end of TWAI Configuration - -# -# UART Configuration -# -# CONFIG_UART_ISR_IN_IRAM is not set -# end of UART Configuration - -# -# GPIO Configuration -# -# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set -# CONFIG_GPIO_CTRL_FUNC_IN_IRAM is not set -# end of GPIO Configuration - -# -# Sigma Delta Modulator Configuration -# -# CONFIG_SDM_CTRL_FUNC_IN_IRAM is not set -# CONFIG_SDM_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_SDM_ENABLE_DEBUG_LOG is not set -# end of Sigma Delta Modulator Configuration - -# -# GPTimer Configuration -# -# CONFIG_GPTIMER_CTRL_FUNC_IN_IRAM is not set -# CONFIG_GPTIMER_ISR_IRAM_SAFE is not set -# CONFIG_GPTIMER_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_GPTIMER_ENABLE_DEBUG_LOG is not set -# end of GPTimer Configuration - -# -# PCNT Configuration -# -# CONFIG_PCNT_CTRL_FUNC_IN_IRAM is not set -# CONFIG_PCNT_ISR_IRAM_SAFE is not set -# CONFIG_PCNT_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_PCNT_ENABLE_DEBUG_LOG is not set -# end of PCNT Configuration - -# -# RMT Configuration -# -# CONFIG_RMT_ISR_IRAM_SAFE is not set -# CONFIG_RMT_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_RMT_ENABLE_DEBUG_LOG is not set -# end of RMT Configuration - -# -# MCPWM Configuration -# -# CONFIG_MCPWM_ISR_IRAM_SAFE is not set -# CONFIG_MCPWM_CTRL_FUNC_IN_IRAM is not set -# CONFIG_MCPWM_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_MCPWM_ENABLE_DEBUG_LOG is not set -# end of MCPWM Configuration - -# -# I2S Configuration -# -# CONFIG_I2S_ISR_IRAM_SAFE is not set -# CONFIG_I2S_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_I2S_ENABLE_DEBUG_LOG is not set -# end of I2S Configuration - -# -# DAC Configuration -# -# CONFIG_DAC_CTRL_FUNC_IN_IRAM is not set -# CONFIG_DAC_ISR_IRAM_SAFE is not set -# CONFIG_DAC_SUPPRESS_DEPRECATE_WARN is not set -# CONFIG_DAC_ENABLE_DEBUG_LOG is not set -CONFIG_DAC_DMA_AUTO_16BIT_ALIGN=y -# end of DAC Configuration -# end of Driver Configurations - -# -# eFuse Bit Manager -# -# CONFIG_EFUSE_CUSTOM_TABLE is not set -# CONFIG_EFUSE_VIRTUAL is not set -# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set -CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y -# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set -CONFIG_EFUSE_MAX_BLK_LEN=192 -# end of eFuse Bit Manager - -# -# ESP-TLS -# -CONFIG_ESP_TLS_USING_MBEDTLS=y -# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set -# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set -# CONFIG_ESP_TLS_SERVER is not set -# CONFIG_ESP_TLS_PSK_VERIFICATION is not set -# CONFIG_ESP_TLS_INSECURE is not set -# end of ESP-TLS - -# -# ADC and ADC Calibration -# -# CONFIG_ADC_ONESHOT_CTRL_FUNC_IN_IRAM is not set -# CONFIG_ADC_CONTINUOUS_ISR_IRAM_SAFE is not set - -# -# ADC Calibration Configurations -# -CONFIG_ADC_CALI_EFUSE_TP_ENABLE=y -CONFIG_ADC_CALI_EFUSE_VREF_ENABLE=y -CONFIG_ADC_CALI_LUT_ENABLE=y -# end of ADC Calibration Configurations - -CONFIG_ADC_DISABLE_DAC_OUTPUT=y -# end of ADC and ADC Calibration - -# -# Wireless Coexistence -# -# end of Wireless Coexistence - -# -# Common ESP-related -# -CONFIG_ESP_ERR_TO_NAME_LOOKUP=y -# end of Common ESP-related - -# -# Ethernet -# -CONFIG_ETH_ENABLED=y -CONFIG_ETH_USE_ESP32_EMAC=y -CONFIG_ETH_PHY_INTERFACE_RMII=y -CONFIG_ETH_RMII_CLK_INPUT=y -# CONFIG_ETH_RMII_CLK_OUTPUT is not set -CONFIG_ETH_RMII_CLK_IN_GPIO=0 -CONFIG_ETH_DMA_BUFFER_SIZE=512 -CONFIG_ETH_DMA_RX_BUFFER_NUM=10 -CONFIG_ETH_DMA_TX_BUFFER_NUM=10 -CONFIG_ETH_USE_SPI_ETHERNET=y -# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set -# CONFIG_ETH_SPI_ETHERNET_W5500 is not set -# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set -# CONFIG_ETH_USE_OPENETH is not set -# CONFIG_ETH_TRANSMIT_MUTEX is not set -# end of Ethernet - -# -# Event Loop Library -# -# CONFIG_ESP_EVENT_LOOP_PROFILING is not set -CONFIG_ESP_EVENT_POST_FROM_ISR=y -CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y -# end of Event Loop Library - -# -# GDB Stub -# -# end of GDB Stub - -# -# ESP HTTP client -# -CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y -# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set -# CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH is not set -# end of ESP HTTP client - -# -# HTTP Server -# -CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 -CONFIG_HTTPD_MAX_URI_LEN=512 -CONFIG_HTTPD_ERR_RESP_NO_DELAY=y -CONFIG_HTTPD_PURGE_BUF_LEN=32 -# CONFIG_HTTPD_LOG_PURGE_DATA is not set -# CONFIG_HTTPD_WS_SUPPORT is not set -# CONFIG_HTTPD_QUEUE_WORK_BLOCKING is not set -# end of HTTP Server - -# -# ESP HTTPS OTA -# -# CONFIG_ESP_HTTPS_OTA_DECRYPT_CB is not set -# CONFIG_ESP_HTTPS_OTA_ALLOW_HTTP is not set -# end of ESP HTTPS OTA - -# -# ESP HTTPS server -# -# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set -# end of ESP HTTPS server - -# -# Hardware Settings -# - -# -# Chip revision -# -CONFIG_ESP32_REV_MIN_0=y -# CONFIG_ESP32_REV_MIN_1 is not set -# CONFIG_ESP32_REV_MIN_1_1 is not set -# CONFIG_ESP32_REV_MIN_2 is not set -# CONFIG_ESP32_REV_MIN_3 is not set -# CONFIG_ESP32_REV_MIN_3_1 is not set -CONFIG_ESP32_REV_MIN=0 -CONFIG_ESP32_REV_MIN_FULL=0 -CONFIG_ESP_REV_MIN_FULL=0 - -# -# Maximum Supported ESP32 Revision (Rev v3.99) -# -CONFIG_ESP32_REV_MAX_FULL=399 -CONFIG_ESP_REV_MAX_FULL=399 -# end of Chip revision - -# -# MAC Config -# -CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y -CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR=y -# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 -# CONFIG_ESP_MAC_IGNORE_MAC_CRC_ERROR is not set -# end of MAC Config - -# -# Sleep Config -# -# CONFIG_ESP_SLEEP_POWER_DOWN_FLASH is not set -CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND=y -# CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU is not set -CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y -# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set -CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY=2000 -# end of Sleep Config - -# -# RTC Clock Config -# -CONFIG_RTC_CLK_SRC_INT_RC=y -# CONFIG_RTC_CLK_SRC_EXT_CRYS is not set -# CONFIG_RTC_CLK_SRC_EXT_OSC is not set -# CONFIG_RTC_CLK_SRC_INT_8MD256 is not set -CONFIG_RTC_CLK_CAL_CYCLES=1024 -# end of RTC Clock Config - -# -# Peripheral Control -# -CONFIG_PERIPH_CTRL_FUNC_IN_IRAM=y -# end of Peripheral Control - -# -# Main XTAL Config -# -# CONFIG_XTAL_FREQ_26 is not set -CONFIG_XTAL_FREQ_40=y -# CONFIG_XTAL_FREQ_AUTO is not set -CONFIG_XTAL_FREQ=40 -# end of Main XTAL Config -# end of Hardware Settings - -# -# LCD and Touch Panel -# - -# -# LCD Touch Drivers are maintained in the IDF Component Registry -# - -# -# LCD Peripheral Configuration -# -CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 -# CONFIG_LCD_ENABLE_DEBUG_LOG is not set -# end of LCD Peripheral Configuration -# end of LCD and Touch Panel - -# -# ESP NETIF Adapter -# -CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 -CONFIG_ESP_NETIF_TCPIP_LWIP=y -# CONFIG_ESP_NETIF_LOOPBACK is not set -CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API=y -# CONFIG_ESP_NETIF_RECEIVE_REPORT_ERRORS is not set -# CONFIG_ESP_NETIF_L2_TAP is not set -# CONFIG_ESP_NETIF_BRIDGE_EN is not set -# end of ESP NETIF Adapter - -# -# Partition API Configuration -# -# end of Partition API Configuration - -# -# PHY -# -CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP_PHY_MAX_TX_POWER=20 -# CONFIG_ESP_PHY_REDUCE_TX_POWER is not set -CONFIG_ESP_PHY_RF_CAL_PARTIAL=y -# CONFIG_ESP_PHY_RF_CAL_NONE is not set -# CONFIG_ESP_PHY_RF_CAL_FULL is not set -CONFIG_ESP_PHY_CALIBRATION_MODE=0 -# end of PHY - -# -# Power Management -# -# CONFIG_PM_ENABLE is not set -# end of Power Management - -# -# ESP PSRAM -# -# CONFIG_SPIRAM is not set -# end of ESP PSRAM - -# -# ESP Ringbuf -# -# CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH is not set -# end of ESP Ringbuf - -# -# ESP System Settings -# -# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_80 is not set -CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160=y -# CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_240 is not set -CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ=160 - -# -# Memory -# -# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set - -# -# Non-backward compatible options -# -# CONFIG_ESP_SYSTEM_ESP32_SRAM1_REGION_AS_IRAM is not set -# end of Non-backward compatible options -# end of Memory - -# -# Trace memory -# -# CONFIG_ESP32_TRAX is not set -CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0 -# end of Trace memory - -# CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT is not set -CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT=y -# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set -# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set -# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set -CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS=0 - -# -# Memory protection -# -# end of Memory protection - -CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 -CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y -# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set -# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set -CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 -CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 -CONFIG_ESP_CONSOLE_UART_DEFAULT=y -# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set -# CONFIG_ESP_CONSOLE_NONE is not set -CONFIG_ESP_CONSOLE_UART=y -CONFIG_ESP_CONSOLE_MULTIPLE_UART=y -CONFIG_ESP_CONSOLE_UART_NUM=0 -CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 -CONFIG_ESP_INT_WDT=y -CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 -CONFIG_ESP_INT_WDT_CHECK_CPU1=y -CONFIG_ESP_TASK_WDT_EN=y -CONFIG_ESP_TASK_WDT_INIT=y -# CONFIG_ESP_TASK_WDT_PANIC is not set -CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -# CONFIG_ESP_PANIC_HANDLER_IRAM is not set -# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set -CONFIG_ESP_DEBUG_OCDAWARE=y -# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set -CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y - -# -# Brownout Detector -# -CONFIG_ESP_BROWNOUT_DET=y -CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0=y -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 is not set -CONFIG_ESP_BROWNOUT_DET_LVL=0 -# end of Brownout Detector - -# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set -CONFIG_ESP_SYSTEM_BROWNOUT_INTR=y -# end of ESP System Settings - -# -# IPC (Inter-Processor Call) -# -CONFIG_ESP_IPC_TASK_STACK_SIZE=1024 -CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y -CONFIG_ESP_IPC_ISR_ENABLE=y -# end of IPC (Inter-Processor Call) - -# -# High resolution timer (esp_timer) -# -# CONFIG_ESP_TIMER_PROFILING is not set -CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y -CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y -CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 -CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 -# CONFIG_ESP_TIMER_SHOW_EXPERIMENTAL is not set -CONFIG_ESP_TIMER_TASK_AFFINITY=0x0 -CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0=y -CONFIG_ESP_TIMER_ISR_AFFINITY=0x1 -CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0=y -# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set -CONFIG_ESP_TIMER_IMPL_TG0_LAC=y -# end of High resolution timer (esp_timer) - -# -# Wi-Fi -# -CONFIG_ESP_WIFI_ENABLED=y -CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM=10 -CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM=32 -# CONFIG_ESP_WIFI_STATIC_TX_BUFFER is not set -CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER=y -CONFIG_ESP_WIFI_TX_BUFFER_TYPE=1 -CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=32 -# CONFIG_ESP_WIFI_CSI_ENABLED is not set -CONFIG_ESP_WIFI_AMPDU_TX_ENABLED=y -CONFIG_ESP_WIFI_TX_BA_WIN=6 -CONFIG_ESP_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP_WIFI_RX_BA_WIN=6 -CONFIG_ESP_WIFI_NVS_ENABLED=y -CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y -# CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 is not set -CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN=752 -CONFIG_ESP_WIFI_MGMT_SBUF_NUM=32 -CONFIG_ESP_WIFI_IRAM_OPT=y -CONFIG_ESP_WIFI_RX_IRAM_OPT=y -CONFIG_ESP_WIFI_ENABLE_WPA3_SAE=y -CONFIG_ESP_WIFI_ENABLE_SAE_PK=y -CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT=y -CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA=y -# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set -CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=y -# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set -CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y -# CONFIG_ESP_WIFI_SLP_BEACON_LOST_OPT is not set -CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=7 -# CONFIG_ESP_WIFI_NAN_ENABLE is not set -CONFIG_ESP_WIFI_MBEDTLS_CRYPTO=y -CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT=y -# CONFIG_ESP_WIFI_WAPI_PSK is not set -# CONFIG_ESP_WIFI_SUITE_B_192 is not set -# CONFIG_ESP_WIFI_11KV_SUPPORT is not set -# CONFIG_ESP_WIFI_MBO_SUPPORT is not set -# CONFIG_ESP_WIFI_DPP_SUPPORT is not set -# CONFIG_ESP_WIFI_11R_SUPPORT is not set -# CONFIG_ESP_WIFI_WPS_SOFTAP_REGISTRAR is not set - -# -# WPS Configuration Options -# -# CONFIG_ESP_WIFI_WPS_STRICT is not set -# CONFIG_ESP_WIFI_WPS_PASSPHRASE is not set -# end of WPS Configuration Options - -# CONFIG_ESP_WIFI_DEBUG_PRINT is not set -# CONFIG_ESP_WIFI_TESTING_OPTIONS is not set -# end of Wi-Fi - -# -# Core dump -# -# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set -# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set -CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y -# end of Core dump - -# -# FAT Filesystem support -# -CONFIG_FATFS_VOLUME_COUNT=2 -CONFIG_FATFS_LFN_NONE=y -# CONFIG_FATFS_LFN_HEAP is not set -# CONFIG_FATFS_LFN_STACK is not set -# CONFIG_FATFS_SECTOR_512 is not set -CONFIG_FATFS_SECTOR_4096=y -# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set -CONFIG_FATFS_CODEPAGE_437=y -# CONFIG_FATFS_CODEPAGE_720 is not set -# CONFIG_FATFS_CODEPAGE_737 is not set -# CONFIG_FATFS_CODEPAGE_771 is not set -# CONFIG_FATFS_CODEPAGE_775 is not set -# CONFIG_FATFS_CODEPAGE_850 is not set -# CONFIG_FATFS_CODEPAGE_852 is not set -# CONFIG_FATFS_CODEPAGE_855 is not set -# CONFIG_FATFS_CODEPAGE_857 is not set -# CONFIG_FATFS_CODEPAGE_860 is not set -# CONFIG_FATFS_CODEPAGE_861 is not set -# CONFIG_FATFS_CODEPAGE_862 is not set -# CONFIG_FATFS_CODEPAGE_863 is not set -# CONFIG_FATFS_CODEPAGE_864 is not set -# CONFIG_FATFS_CODEPAGE_865 is not set -# CONFIG_FATFS_CODEPAGE_866 is not set -# CONFIG_FATFS_CODEPAGE_869 is not set -# CONFIG_FATFS_CODEPAGE_932 is not set -# CONFIG_FATFS_CODEPAGE_936 is not set -# CONFIG_FATFS_CODEPAGE_949 is not set -# CONFIG_FATFS_CODEPAGE_950 is not set -CONFIG_FATFS_CODEPAGE=437 -CONFIG_FATFS_FS_LOCK=0 -CONFIG_FATFS_TIMEOUT_MS=10000 -CONFIG_FATFS_PER_FILE_CACHE=y -# CONFIG_FATFS_USE_FASTSEEK is not set -CONFIG_FATFS_VFS_FSTAT_BLKSIZE=0 -# end of FAT Filesystem support - -# -# FreeRTOS -# - -# -# Kernel -# -# CONFIG_FREERTOS_SMP is not set -# CONFIG_FREERTOS_UNICORE is not set -CONFIG_FREERTOS_HZ=100 -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set -CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y -CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 -CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 -# CONFIG_FREERTOS_USE_IDLE_HOOK is not set -# CONFIG_FREERTOS_USE_TICK_HOOK is not set -CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 -# CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY is not set -CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 -CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 -CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 -CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 -CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES=1 -# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set -# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set -# end of Kernel - -# -# Port -# -CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y -# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set -CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS=y -# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set -CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y -CONFIG_FREERTOS_ISR_STACKSIZE=1536 -CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y -# CONFIG_FREERTOS_FPU_IN_ISR is not set -CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y -CONFIG_FREERTOS_CORETIMER_0=y -# CONFIG_FREERTOS_CORETIMER_1 is not set -CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y -# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set -# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set -# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set -CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y -# end of Port - -CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF -CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y -CONFIG_FREERTOS_DEBUG_OCDAWARE=y -# end of FreeRTOS - -# -# Hardware Abstraction Layer (HAL) and Low Level (LL) -# -CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y -# CONFIG_HAL_ASSERTION_DISABLE is not set -# CONFIG_HAL_ASSERTION_SILENT is not set -# CONFIG_HAL_ASSERTION_ENABLE is not set -CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 -CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM=y -CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM=y -# end of Hardware Abstraction Layer (HAL) and Low Level (LL) - -# -# Heap memory debugging -# -CONFIG_HEAP_POISONING_DISABLED=y -# CONFIG_HEAP_POISONING_LIGHT is not set -# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set -CONFIG_HEAP_TRACING_OFF=y -# CONFIG_HEAP_TRACING_STANDALONE is not set -# CONFIG_HEAP_TRACING_TOHOST is not set -# CONFIG_HEAP_USE_HOOKS is not set -# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set -# CONFIG_HEAP_PLACE_FUNCTION_INTO_FLASH is not set -# end of Heap memory debugging - -CONFIG_IEEE802154_CCA_THRESHOLD=-60 -CONFIG_IEEE802154_PENDING_TABLE_SIZE=20 - -# -# Log output -# -# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set -# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set -# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set -CONFIG_LOG_DEFAULT_LEVEL_INFO=y -# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set -# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set -CONFIG_LOG_DEFAULT_LEVEL=3 -CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y -# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set -# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set -CONFIG_LOG_MAXIMUM_LEVEL=3 -CONFIG_LOG_COLORS=y -CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y -# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set -# end of Log output - -# -# LWIP -# -CONFIG_LWIP_LOCAL_HOSTNAME="espressif" -# CONFIG_LWIP_NETIF_API is not set -# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set -# CONFIG_LWIP_CHECK_THREAD_SAFETY is not set -CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y -# CONFIG_LWIP_L2_TO_L3_COPY is not set -# CONFIG_LWIP_IRAM_OPTIMIZATION is not set -CONFIG_LWIP_TIMERS_ONDEMAND=y -CONFIG_LWIP_MAX_SOCKETS=10 -# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set -# CONFIG_LWIP_SO_LINGER is not set -CONFIG_LWIP_SO_REUSE=y -CONFIG_LWIP_SO_REUSE_RXTOALL=y -# CONFIG_LWIP_SO_RCVBUF is not set -# CONFIG_LWIP_NETBUF_RECVINFO is not set -CONFIG_LWIP_IP4_FRAG=y -CONFIG_LWIP_IP6_FRAG=y -# CONFIG_LWIP_IP4_REASSEMBLY is not set -# CONFIG_LWIP_IP6_REASSEMBLY is not set -CONFIG_LWIP_IP_REASS_MAX_PBUFS=10 -# CONFIG_LWIP_IP_FORWARD is not set -# CONFIG_LWIP_STATS is not set -CONFIG_LWIP_ESP_GRATUITOUS_ARP=y -CONFIG_LWIP_GARP_TMR_INTERVAL=60 -CONFIG_LWIP_ESP_MLDV6_REPORT=y -CONFIG_LWIP_MLDV6_TMR_INTERVAL=40 -CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 -CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y -# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set -CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y -# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set -CONFIG_LWIP_DHCP_OPTIONS_LEN=68 -CONFIG_LWIP_NUM_NETIF_CLIENT_DATA=0 -CONFIG_LWIP_DHCP_COARSE_TIMER_SECS=1 - -# -# DHCP server -# -CONFIG_LWIP_DHCPS=y -CONFIG_LWIP_DHCPS_LEASE_UNIT=60 -CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 -# end of DHCP server - -# CONFIG_LWIP_AUTOIP is not set -CONFIG_LWIP_IPV4=y -CONFIG_LWIP_IPV6=y -# CONFIG_LWIP_IPV6_AUTOCONFIG is not set -CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 -# CONFIG_LWIP_IPV6_FORWARD is not set -# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set -CONFIG_LWIP_NETIF_LOOPBACK=y -CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 - -# -# TCP -# -CONFIG_LWIP_MAX_ACTIVE_TCP=16 -CONFIG_LWIP_MAX_LISTENING_TCP=16 -CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y -CONFIG_LWIP_TCP_MAXRTX=12 -CONFIG_LWIP_TCP_SYNMAXRTX=12 -CONFIG_LWIP_TCP_MSS=1440 -CONFIG_LWIP_TCP_TMR_INTERVAL=250 -CONFIG_LWIP_TCP_MSL=60000 -CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT=20000 -CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 -CONFIG_LWIP_TCP_WND_DEFAULT=5744 -CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 -CONFIG_LWIP_TCP_QUEUE_OOSEQ=y -# CONFIG_LWIP_TCP_SACK_OUT is not set -CONFIG_LWIP_TCP_OVERSIZE_MSS=y -# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set -CONFIG_LWIP_TCP_RTO_TIME=1500 -# end of TCP - -# -# UDP -# -CONFIG_LWIP_MAX_UDP_PCBS=16 -CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 -# end of UDP - -# -# Checksums -# -# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set -# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set -CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y -# end of Checksums - -CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set -CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_LWIP_PPP_SUPPORT is not set -CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 -CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 -# CONFIG_LWIP_SLIP_SUPPORT is not set - -# -# ICMP -# -CONFIG_LWIP_ICMP=y -# CONFIG_LWIP_MULTICAST_PING is not set -# CONFIG_LWIP_BROADCAST_PING is not set -# end of ICMP - -# -# LWIP RAW API -# -CONFIG_LWIP_MAX_RAW_PCBS=16 -# end of LWIP RAW API - -# -# SNTP -# -CONFIG_LWIP_SNTP_MAX_SERVERS=1 -# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set -CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 -# end of SNTP - -CONFIG_LWIP_BRIDGEIF_MAX_PORTS=7 -CONFIG_LWIP_ESP_LWIP_ASSERT=y - -# -# Hooks -# -# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set -CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y -# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set -CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y -# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set -# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set -CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y -# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set -# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set -CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE=y -# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_DEFAULT is not set -# CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_CUSTOM is not set -CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y -# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set -# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set -CONFIG_LWIP_HOOK_IP6_INPUT_NONE=y -# CONFIG_LWIP_HOOK_IP6_INPUT_DEFAULT is not set -# CONFIG_LWIP_HOOK_IP6_INPUT_CUSTOM is not set -# end of Hooks - -# CONFIG_LWIP_DEBUG is not set -# end of LWIP - -# -# mbedTLS -# -CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y -# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set -# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set -CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y -CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 -CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 -# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set -# CONFIG_MBEDTLS_DEBUG is not set - -# -# mbedTLS v3.x related -# -# CONFIG_MBEDTLS_SSL_PROTO_TLS1_3 is not set -# CONFIG_MBEDTLS_SSL_VARIABLE_BUFFER_LENGTH is not set -# CONFIG_MBEDTLS_X509_TRUSTED_CERT_CALLBACK is not set -# CONFIG_MBEDTLS_SSL_CONTEXT_SERIALIZATION is not set -CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE=y -CONFIG_MBEDTLS_PKCS7_C=y -# end of mbedTLS v3.x related - -# -# Certificate Bundle -# -CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y -CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y -# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set -# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set -# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set -CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS=200 -# end of Certificate Bundle - -# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set -# CONFIG_MBEDTLS_CMAC_C is not set -CONFIG_MBEDTLS_HARDWARE_AES=y -CONFIG_MBEDTLS_HARDWARE_MPI=y -CONFIG_MBEDTLS_HARDWARE_SHA=y -CONFIG_MBEDTLS_ROM_MD5=y -# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set -# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set -CONFIG_MBEDTLS_HAVE_TIME=y -# CONFIG_MBEDTLS_PLATFORM_TIME_ALT is not set -# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set -CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y -CONFIG_MBEDTLS_SHA512_C=y -CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y -# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set -# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set -# CONFIG_MBEDTLS_TLS_DISABLED is not set -CONFIG_MBEDTLS_TLS_SERVER=y -CONFIG_MBEDTLS_TLS_CLIENT=y -CONFIG_MBEDTLS_TLS_ENABLED=y - -# -# TLS Key Exchange Methods -# -# CONFIG_MBEDTLS_PSK_MODES is not set -CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y -# end of TLS Key Exchange Methods - -CONFIG_MBEDTLS_SSL_RENEGOTIATION=y -CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y -# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set -# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set -CONFIG_MBEDTLS_SSL_ALPN=y -CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y -CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y - -# -# Symmetric Ciphers -# -CONFIG_MBEDTLS_AES_C=y -# CONFIG_MBEDTLS_CAMELLIA_C is not set -# CONFIG_MBEDTLS_DES_C is not set -# CONFIG_MBEDTLS_BLOWFISH_C is not set -# CONFIG_MBEDTLS_XTEA_C is not set -CONFIG_MBEDTLS_CCM_C=y -CONFIG_MBEDTLS_GCM_C=y -# CONFIG_MBEDTLS_NIST_KW_C is not set -# end of Symmetric Ciphers - -# CONFIG_MBEDTLS_RIPEMD160_C is not set - -# -# Certificates -# -CONFIG_MBEDTLS_PEM_PARSE_C=y -CONFIG_MBEDTLS_PEM_WRITE_C=y -CONFIG_MBEDTLS_X509_CRL_PARSE_C=y -CONFIG_MBEDTLS_X509_CSR_PARSE_C=y -# end of Certificates - -CONFIG_MBEDTLS_ECP_C=y -# CONFIG_MBEDTLS_DHM_C is not set -CONFIG_MBEDTLS_ECDH_C=y -CONFIG_MBEDTLS_ECDSA_C=y -# CONFIG_MBEDTLS_ECJPAKE_C is not set -CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y -CONFIG_MBEDTLS_ECP_NIST_OPTIM=y -# CONFIG_MBEDTLS_POLY1305_C is not set -# CONFIG_MBEDTLS_CHACHA20_C is not set -# CONFIG_MBEDTLS_HKDF_C is not set -# CONFIG_MBEDTLS_THREADING_C is not set -# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set -# CONFIG_MBEDTLS_SECURITY_RISKS is not set -# end of mbedTLS - -# -# ESP-MQTT Configurations -# -CONFIG_MQTT_PROTOCOL_311=y -# CONFIG_MQTT_PROTOCOL_5 is not set -CONFIG_MQTT_TRANSPORT_SSL=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y -# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set -# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set -# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set -# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set -# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set -# CONFIG_MQTT_CUSTOM_OUTBOX is not set -# end of ESP-MQTT Configurations - -# -# Newlib -# -CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y -# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set -# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set -# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set -# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set -CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y -# CONFIG_NEWLIB_NANO_FORMAT is not set -CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT=y -# CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC is not set -# CONFIG_NEWLIB_TIME_SYSCALL_USE_HRT is not set -# CONFIG_NEWLIB_TIME_SYSCALL_USE_NONE is not set -# end of Newlib - -# -# NVS -# -# CONFIG_NVS_ASSERT_ERROR_CHECK is not set -# end of NVS - -# -# OpenThread -# -# CONFIG_OPENTHREAD_ENABLED is not set - -# -# Thread Operational Dataset -# -CONFIG_OPENTHREAD_NETWORK_NAME="OpenThread-ESP" -CONFIG_OPENTHREAD_NETWORK_CHANNEL=15 -CONFIG_OPENTHREAD_NETWORK_PANID=0x1234 -CONFIG_OPENTHREAD_NETWORK_EXTPANID="dead00beef00cafe" -CONFIG_OPENTHREAD_NETWORK_MASTERKEY="00112233445566778899aabbccddeeff" -CONFIG_OPENTHREAD_NETWORK_PSKC="104810e2315100afd6bc9215a6bfac53" -# end of Thread Operational Dataset -# end of OpenThread - -# -# Protocomm -# -CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0=y -CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1=y -CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2=y -# end of Protocomm - -# -# PThreads -# -CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 -CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 -CONFIG_PTHREAD_STACK_MIN=768 -CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y -# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set -# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set -CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 -CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" -# end of PThreads - -# -# MMU Config -# -CONFIG_MMU_PAGE_SIZE_64KB=y -CONFIG_MMU_PAGE_MODE="64KB" -CONFIG_MMU_PAGE_SIZE=0x10000 -# end of MMU Config - -# -# SPI Flash driver -# -# CONFIG_SPI_FLASH_VERIFY_WRITE is not set -# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set -CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y -CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y -# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set -# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set -# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set -# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set -CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y -CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 -CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 -CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 -# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set -# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set -# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set - -# -# SPI Flash behavior when brownout -# -CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC=y -CONFIG_SPI_FLASH_BROWNOUT_RESET=y -# end of SPI Flash behavior when brownout - -# -# Auto-detect flash chips -# -CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED=y -CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED=y -CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED=y -CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED=y -CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED=y -CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y -# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set -# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set -# end of Auto-detect flash chips - -CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y -# end of SPI Flash driver - -# -# SPIFFS Configuration -# -CONFIG_SPIFFS_MAX_PARTITIONS=3 - -# -# SPIFFS Cache Configuration -# -CONFIG_SPIFFS_CACHE=y -CONFIG_SPIFFS_CACHE_WR=y -# CONFIG_SPIFFS_CACHE_STATS is not set -# end of SPIFFS Cache Configuration - -CONFIG_SPIFFS_PAGE_CHECK=y -CONFIG_SPIFFS_GC_MAX_RUNS=10 -# CONFIG_SPIFFS_GC_STATS is not set -CONFIG_SPIFFS_PAGE_SIZE=256 -CONFIG_SPIFFS_OBJ_NAME_LEN=32 -# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set -CONFIG_SPIFFS_USE_MAGIC=y -CONFIG_SPIFFS_USE_MAGIC_LENGTH=y -CONFIG_SPIFFS_META_LENGTH=4 -CONFIG_SPIFFS_USE_MTIME=y - -# -# Debug Configuration -# -# CONFIG_SPIFFS_DBG is not set -# CONFIG_SPIFFS_API_DBG is not set -# CONFIG_SPIFFS_GC_DBG is not set -# CONFIG_SPIFFS_CACHE_DBG is not set -# CONFIG_SPIFFS_CHECK_DBG is not set -# CONFIG_SPIFFS_TEST_VISUALISATION is not set -# end of Debug Configuration -# end of SPIFFS Configuration - -# -# TCP Transport -# - -# -# Websocket -# -CONFIG_WS_TRANSPORT=y -CONFIG_WS_BUFFER_SIZE=1024 -# CONFIG_WS_DYNAMIC_BUFFER is not set -# end of Websocket -# end of TCP Transport - -# -# Ultra Low Power (ULP) Co-processor -# -# CONFIG_ULP_COPROC_ENABLED is not set -# end of Ultra Low Power (ULP) Co-processor - -# -# Unity unit testing library -# -CONFIG_UNITY_ENABLE_FLOAT=y -CONFIG_UNITY_ENABLE_DOUBLE=y -# CONFIG_UNITY_ENABLE_64BIT is not set -# CONFIG_UNITY_ENABLE_COLOR is not set -CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y -# CONFIG_UNITY_ENABLE_FIXTURE is not set -# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set -# end of Unity unit testing library - -# -# Root Hub configuration -# -# end of Root Hub configuration - -# -# Virtual file system -# -CONFIG_VFS_SUPPORT_IO=y -CONFIG_VFS_SUPPORT_DIR=y -CONFIG_VFS_SUPPORT_SELECT=y -CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_VFS_SUPPORT_TERMIOS=y -CONFIG_VFS_MAX_COUNT=8 - -# -# Host File System I/O (Semihosting) -# -CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -# end of Host File System I/O (Semihosting) -# end of Virtual file system - -# -# Wear Levelling -# -# CONFIG_WL_SECTOR_SIZE_512 is not set -CONFIG_WL_SECTOR_SIZE_4096=y -CONFIG_WL_SECTOR_SIZE=4096 -# end of Wear Levelling - -# -# Wi-Fi Provisioning Manager -# -CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 -CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 -# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set -CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y -# CONFIG_WIFI_PROV_STA_FAST_SCAN is not set -# end of Wi-Fi Provisioning Manager - -# -# SRA Board Component Config -# - -# -# I2C -# -CONFIG_I2CDEV_TIMEOUT=1000 -# CONFIG_I2CDEV_NOLOCK is not set -# end of I2C - -# CONFIG_ENABLE_OLED is not set -CONFIG_WALL_E_LOGO_TEXT="Wall-E 2023" -CONFIG_MARIO_LOGO_TEXT="MARIO 2023" - -# -# Servo motor configuration -# - -# -# Servo A -# -CONFIG_SERVO_A_MIN_PULSEWIDTH=500 -CONFIG_SERVO_A_MAX_PULSEWIDTH=3000 -CONFIG_SERVO_A_MAX_DEGREE=180 -# end of Servo A - -# -# Servo B -# -CONFIG_SERVO_B_MIN_PULSEWIDTH=500 -CONFIG_SERVO_B_MAX_PULSEWIDTH=3000 -CONFIG_SERVO_B_MAX_DEGREE=180 -# end of Servo B - -# -# Servo C -# -CONFIG_SERVO_C_MIN_PULSEWIDTH=500 -CONFIG_SERVO_C_MAX_PULSEWIDTH=3000 -CONFIG_SERVO_C_MAX_DEGREE=180 -# end of Servo C - -# -# Servo D -# -CONFIG_SERVO_D_MIN_PULSEWIDTH=500 -CONFIG_SERVO_D_MAX_PULSEWIDTH=3000 -CONFIG_SERVO_D_MAX_DEGREE=180 -# end of Servo D -# end of Servo motor configuration - -CONFIG_NUMBER_OF_SAMPLES=64 -CONFIG_MPU_CALIBRATION_AVG_COUNT=100 -# end of SRA Board Component Config -# end of Component config - -# CONFIG_IDF_EXPERIMENTAL_FEATURES is not set - -# Deprecated options for backward compatibility -# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set -# CONFIG_NO_BLOBS is not set -# CONFIG_ESP32_NO_BLOBS is not set -# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set -# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set -CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y -# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set -CONFIG_LOG_BOOTLOADER_LEVEL=3 -# CONFIG_APP_ROLLBACK_ENABLE is not set -# CONFIG_FLASH_ENCRYPTION_ENABLED is not set -# CONFIG_FLASHMODE_QIO is not set -# CONFIG_FLASHMODE_QOUT is not set -CONFIG_FLASHMODE_DIO=y -# CONFIG_FLASHMODE_DOUT is not set -CONFIG_MONITOR_BAUD=115200 -CONFIG_OPTIMIZATION_LEVEL_DEBUG=y -CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y -# CONFIG_OPTIMIZATION_LEVEL_RELEASE is not set -# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set -CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y -# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set -# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set -CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2 -# CONFIG_CXX_EXCEPTIONS is not set -CONFIG_STACK_CHECK_NONE=y -# CONFIG_STACK_CHECK_NORM is not set -# CONFIG_STACK_CHECK_STRONG is not set -# CONFIG_STACK_CHECK_ALL is not set -# CONFIG_WARN_WRITE_STRINGS is not set -# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set -CONFIG_ESP32_APPTRACE_DEST_NONE=y -CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y -CONFIG_ADC2_DISABLE_DAC=y -# CONFIG_MCPWM_ISR_IN_IRAM is not set -# CONFIG_EVENT_LOOP_PROFILING is not set -CONFIG_POST_EVENTS_FROM_ISR=y -CONFIG_POST_EVENTS_FROM_IRAM_ISR=y -# CONFIG_OTA_ALLOW_HTTP is not set -# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set -CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y -CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4 -# CONFIG_ESP_SYSTEM_PD_FLASH is not set -CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 -CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y -CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y -# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set -# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set -# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set -CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024 -# CONFIG_ESP32_XTAL_FREQ_26 is not set -CONFIG_ESP32_XTAL_FREQ_40=y -# CONFIG_ESP32_XTAL_FREQ_AUTO is not set -CONFIG_ESP32_XTAL_FREQ=40 -CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP32_PHY_MAX_TX_POWER=20 -# CONFIG_REDUCE_PHY_TX_POWER is not set -# CONFIG_ESP32_REDUCE_PHY_TX_POWER is not set -# CONFIG_SPIRAM_SUPPORT is not set -# CONFIG_ESP32_SPIRAM_SUPPORT is not set -# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set -CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y -# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set -CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160 -CONFIG_TRACEMEM_RESERVE_DRAM=0x0 -# CONFIG_ESP32_PANIC_PRINT_HALT is not set -CONFIG_ESP32_PANIC_PRINT_REBOOT=y -# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set -# CONFIG_ESP32_PANIC_GDBSTUB is not set -CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_MAIN_TASK_STACK_SIZE=3584 -CONFIG_CONSOLE_UART_DEFAULT=y -# CONFIG_CONSOLE_UART_CUSTOM is not set -# CONFIG_CONSOLE_UART_NONE is not set -# CONFIG_ESP_CONSOLE_UART_NONE is not set -CONFIG_CONSOLE_UART=y -CONFIG_CONSOLE_UART_NUM=0 -CONFIG_CONSOLE_UART_BAUDRATE=115200 -CONFIG_INT_WDT=y -CONFIG_INT_WDT_TIMEOUT_MS=300 -CONFIG_INT_WDT_CHECK_CPU1=y -CONFIG_TASK_WDT=y -CONFIG_ESP_TASK_WDT=y -# CONFIG_TASK_WDT_PANIC is not set -CONFIG_TASK_WDT_TIMEOUT_S=5 -CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set -CONFIG_ESP32_DEBUG_OCDAWARE=y -CONFIG_BROWNOUT_DET=y -CONFIG_ESP32_BROWNOUT_DET=y -CONFIG_BROWNOUT_DET_LVL_SEL_0=y -CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y -# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set -CONFIG_BROWNOUT_DET_LVL=0 -CONFIG_ESP32_BROWNOUT_DET_LVL=0 -# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set -CONFIG_IPC_TASK_STACK_SIZE=1024 -CONFIG_TIMER_TASK_STACK_SIZE=3584 -CONFIG_ESP32_WIFI_ENABLED=y -CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 -CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y -CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_CSI_ENABLED is not set -CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y -CONFIG_ESP32_WIFI_TX_BA_WIN=6 -CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP32_WIFI_RX_BA_WIN=6 -CONFIG_ESP32_WIFI_RX_BA_WIN=6 -CONFIG_ESP32_WIFI_NVS_ENABLED=y -CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y -# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set -CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 -CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 -CONFIG_ESP32_WIFI_IRAM_OPT=y -CONFIG_ESP32_WIFI_RX_IRAM_OPT=y -CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y -CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA=y -CONFIG_WPA_MBEDTLS_CRYPTO=y -CONFIG_WPA_MBEDTLS_TLS_CLIENT=y -# CONFIG_WPA_WAPI_PSK is not set -# CONFIG_WPA_SUITE_B_192 is not set -# CONFIG_WPA_11KV_SUPPORT is not set -# CONFIG_WPA_MBO_SUPPORT is not set -# CONFIG_WPA_DPP_SUPPORT is not set -# CONFIG_WPA_11R_SUPPORT is not set -# CONFIG_WPA_WPS_SOFTAP_REGISTRAR is not set -# CONFIG_WPA_WPS_STRICT is not set -# CONFIG_WPA_DEBUG_PRINT is not set -# CONFIG_WPA_TESTING_OPTIONS is not set -# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set -# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set -CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y -CONFIG_TIMER_TASK_PRIORITY=1 -CONFIG_TIMER_TASK_STACK_DEPTH=2048 -CONFIG_TIMER_QUEUE_LENGTH=10 -# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set -# CONFIG_HAL_ASSERTION_SILIENT is not set -# CONFIG_L2_TO_L3_COPY is not set -CONFIG_ESP_GRATUITOUS_ARP=y -CONFIG_GARP_TMR_INTERVAL=60 -CONFIG_TCPIP_RECVMBOX_SIZE=32 -CONFIG_TCP_MAXRTX=12 -CONFIG_TCP_SYNMAXRTX=12 -CONFIG_TCP_MSS=1440 -CONFIG_TCP_MSL=60000 -CONFIG_TCP_SND_BUF_DEFAULT=5744 -CONFIG_TCP_WND_DEFAULT=5744 -CONFIG_TCP_RECVMBOX_SIZE=6 -CONFIG_TCP_QUEUE_OOSEQ=y -CONFIG_TCP_OVERSIZE_MSS=y -# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_TCP_OVERSIZE_DISABLE is not set -CONFIG_UDP_RECVMBOX_SIZE=6 -CONFIG_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set -# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set -CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_PPP_SUPPORT is not set -CONFIG_ESP32_TIME_SYSCALL_USE_RTC_HRT=y -CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y -# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_HRT is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set -CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 -CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 -CONFIG_ESP32_PTHREAD_STACK_MIN=768 -CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y -# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set -# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set -CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 -CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" -CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y -# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set -# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set -# CONFIG_ESP32_ULP_COPROC_ENABLED is not set -CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_SUPPORT_TERMIOS=y -CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -# End of deprecated options diff --git a/examples/servos/sdkconfig b/examples/servos/sdkconfig deleted file mode 100644 index 60eca00..0000000 --- a/examples/servos/sdkconfig +++ /dev/null @@ -1,1115 +0,0 @@ -# -# Automatically generated file. DO NOT EDIT. -# Espressif IoT Development Framework (ESP-IDF) Project Configuration -# -CONFIG_IDF_CMAKE=y -CONFIG_IDF_TARGET="esp32" -CONFIG_IDF_TARGET_ESP32=y -CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000 - -# -# SDK tool configuration -# -CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-" -# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set -# end of SDK tool configuration - -# -# Build type -# -CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y -# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set -CONFIG_APP_BUILD_GENERATE_BINARIES=y -CONFIG_APP_BUILD_BOOTLOADER=y -CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y -# end of Build type - -# -# Partition Table -# -CONFIG_PARTITION_TABLE_SINGLE_APP=y -# CONFIG_PARTITION_TABLE_TWO_OTA is not set -# CONFIG_PARTITION_TABLE_CUSTOM is not set -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" -CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv" -CONFIG_PARTITION_TABLE_OFFSET=0x8000 -CONFIG_PARTITION_TABLE_MD5=y -# end of Partition Table - -# -# Application manager -# -CONFIG_APP_COMPILE_TIME_DATE=y -# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set -# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set -CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 -# end of Application manager - -# -# Serial flasher config -# -CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200 -# CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set -# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set -CONFIG_ESPTOOLPY_FLASHMODE_DIO=y -# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set -CONFIG_ESPTOOLPY_FLASHMODE="dio" -# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set -CONFIG_ESPTOOLPY_FLASHFREQ_40M=y -# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set -# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set -CONFIG_ESPTOOLPY_FLASHFREQ="40m" -# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set -CONFIG_ESPTOOLPY_FLASHSIZE_2MB=y -# CONFIG_ESPTOOLPY_FLASHSIZE_4MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set -CONFIG_ESPTOOLPY_FLASHSIZE="2MB" -CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y -CONFIG_ESPTOOLPY_BEFORE_RESET=y -# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set -CONFIG_ESPTOOLPY_BEFORE="default_reset" -CONFIG_ESPTOOLPY_AFTER_RESET=y -# CONFIG_ESPTOOLPY_AFTER_NORESET is not set -CONFIG_ESPTOOLPY_AFTER="hard_reset" -# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set -CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y -# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set -CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200 -CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 -# end of Serial flasher config - -# -# Bootloader config -# -CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set -CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y -# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set -CONFIG_BOOTLOADER_LOG_LEVEL=3 -# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set -CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y -# CONFIG_BOOTLOADER_FACTORY_RESET is not set -# CONFIG_BOOTLOADER_APP_TEST is not set -CONFIG_BOOTLOADER_WDT_ENABLE=y -# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set -CONFIG_BOOTLOADER_WDT_TIME_MS=9000 -# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set -CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 -# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set -# end of Bootloader config - -# -# Security features -# -# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set -# CONFIG_SECURE_BOOT is not set -# CONFIG_SECURE_FLASH_ENC_ENABLED is not set -# end of Security features - -# -# Compiler options -# -CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y -# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set -# CONFIG_COMPILER_OPTIMIZATION_PERF is not set -# CONFIG_COMPILER_OPTIMIZATION_NONE is not set -CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y -# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set -# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set -# CONFIG_COMPILER_CXX_EXCEPTIONS is not set -# CONFIG_COMPILER_CXX_RTTI is not set -CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y -# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set -# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set -# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set -# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set -# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set -# end of Compiler options - -# -# Component config -# - -# -# Ethernet -# -CONFIG_ETH_ENABLED=y -CONFIG_ETH_USE_ESP32_EMAC=y -CONFIG_ETH_PHY_INTERFACE_RMII=y -# CONFIG_ETH_PHY_INTERFACE_MII is not set -CONFIG_ETH_RMII_CLK_INPUT=y -# CONFIG_ETH_RMII_CLK_OUTPUT is not set -CONFIG_ETH_RMII_CLK_IN_GPIO=0 -CONFIG_ETH_DMA_BUFFER_SIZE=512 -CONFIG_ETH_DMA_RX_BUFFER_NUM=10 -CONFIG_ETH_DMA_TX_BUFFER_NUM=10 -CONFIG_ETH_USE_SPI_ETHERNET=y -CONFIG_ETH_SPI_ETHERNET_DM9051=y -# CONFIG_ETH_USE_OPENETH is not set -# end of Ethernet - -# -# Log output -# -# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set -# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set -# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set -CONFIG_LOG_DEFAULT_LEVEL_INFO=y -# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set -# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set -CONFIG_LOG_DEFAULT_LEVEL=3 -CONFIG_LOG_COLORS=y -CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y -# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set -# end of Log output - -# -# Unity unit testing library -# -CONFIG_UNITY_ENABLE_FLOAT=y -CONFIG_UNITY_ENABLE_DOUBLE=y -# CONFIG_UNITY_ENABLE_COLOR is not set -CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y -# CONFIG_UNITY_ENABLE_FIXTURE is not set -# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set -# end of Unity unit testing library - -# -# Application Level Tracing -# -# CONFIG_APPTRACE_DEST_TRAX is not set -CONFIG_APPTRACE_DEST_NONE=y -CONFIG_APPTRACE_LOCK_ENABLE=y -# end of Application Level Tracing - -# -# Supplicant -# -CONFIG_WPA_MBEDTLS_CRYPTO=y -# CONFIG_WPA_TLS_V12 is not set -# end of Supplicant - -# -# mDNS -# -CONFIG_MDNS_MAX_SERVICES=10 -CONFIG_MDNS_TASK_PRIORITY=1 -# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set -CONFIG_MDNS_TASK_AFFINITY_CPU0=y -# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set -CONFIG_MDNS_TASK_AFFINITY=0x0 -CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000 -CONFIG_MDNS_TIMER_PERIOD_MS=100 -# end of mDNS - -# -# ESP HTTP client -# -CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y -# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set -# end of ESP HTTP client - -# -# libsodium -# -# end of libsodium - -# -# Wear Levelling -# -# CONFIG_WL_SECTOR_SIZE_512 is not set -CONFIG_WL_SECTOR_SIZE_4096=y -CONFIG_WL_SECTOR_SIZE=4096 -# end of Wear Levelling - -# -# SPIFFS Configuration -# -CONFIG_SPIFFS_MAX_PARTITIONS=3 - -# -# SPIFFS Cache Configuration -# -CONFIG_SPIFFS_CACHE=y -CONFIG_SPIFFS_CACHE_WR=y -# CONFIG_SPIFFS_CACHE_STATS is not set -# end of SPIFFS Cache Configuration - -CONFIG_SPIFFS_PAGE_CHECK=y -CONFIG_SPIFFS_GC_MAX_RUNS=10 -# CONFIG_SPIFFS_GC_STATS is not set -CONFIG_SPIFFS_PAGE_SIZE=256 -CONFIG_SPIFFS_OBJ_NAME_LEN=32 -# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set -CONFIG_SPIFFS_USE_MAGIC=y -CONFIG_SPIFFS_USE_MAGIC_LENGTH=y -CONFIG_SPIFFS_META_LENGTH=4 -CONFIG_SPIFFS_USE_MTIME=y - -# -# Debug Configuration -# -# CONFIG_SPIFFS_DBG is not set -# CONFIG_SPIFFS_API_DBG is not set -# CONFIG_SPIFFS_GC_DBG is not set -# CONFIG_SPIFFS_CACHE_DBG is not set -# CONFIG_SPIFFS_CHECK_DBG is not set -# CONFIG_SPIFFS_TEST_VISUALISATION is not set -# end of Debug Configuration -# end of SPIFFS Configuration - -# -# NVS -# -# end of NVS - -# -# Event Loop Library -# -# CONFIG_ESP_EVENT_LOOP_PROFILING is not set -CONFIG_ESP_EVENT_POST_FROM_ISR=y -CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y -# end of Event Loop Library - -# -# Modbus configuration -# -CONFIG_FMB_COMM_MODE_RTU_EN=y -CONFIG_FMB_COMM_MODE_ASCII_EN=y -CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150 -CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200 -CONFIG_FMB_QUEUE_LENGTH=20 -CONFIG_FMB_SERIAL_TASK_STACK_SIZE=2048 -CONFIG_FMB_SERIAL_BUF_SIZE=256 -CONFIG_FMB_SERIAL_ASCII_BITS_PER_SYMB=8 -CONFIG_FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS=1000 -CONFIG_FMB_SERIAL_TASK_PRIO=10 -# CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT is not set -CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20 -CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 -CONFIG_FMB_CONTROLLER_STACK_SIZE=4096 -CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20 -CONFIG_FMB_TIMER_PORT_ENABLED=y -CONFIG_FMB_TIMER_GROUP=0 -CONFIG_FMB_TIMER_INDEX=0 -# CONFIG_FMB_TIMER_ISR_IN_IRAM is not set -# end of Modbus configuration - -# -# ADC-Calibration -# -CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y -CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y -CONFIG_ADC_CAL_LUT_ENABLE=y -# end of ADC-Calibration - -# -# Bluetooth -# -# CONFIG_BT_ENABLED is not set -CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF=0 -CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF=0 -CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF=0 -CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF=0 -CONFIG_BTDM_CTRL_PINNED_TO_CORE=0 -CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF=1 -CONFIG_BT_RESERVE_DRAM=0 -# end of Bluetooth - -# CONFIG_BLE_MESH is not set - -# -# Newlib -# -CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y -# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set -# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set -# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set -# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set -CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y -# CONFIG_NEWLIB_NANO_FORMAT is not set -# end of Newlib - -# -# SPI Flash driver -# -# CONFIG_SPI_FLASH_VERIFY_WRITE is not set -# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set -CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y -CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y -# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set -# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set -# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set -# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set -CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y -CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 -CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 - -# -# Auto-detect flash chips -# -CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y -# end of Auto-detect flash chips -# end of SPI Flash driver - -# -# HTTP Server -# -CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 -CONFIG_HTTPD_MAX_URI_LEN=512 -CONFIG_HTTPD_ERR_RESP_NO_DELAY=y -CONFIG_HTTPD_PURGE_BUF_LEN=32 -# CONFIG_HTTPD_LOG_PURGE_DATA is not set -# end of HTTP Server - -# -# ESP NETIF Adapter -# -CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 -CONFIG_ESP_NETIF_TCPIP_LWIP=y -# CONFIG_ESP_NETIF_LOOPBACK is not set -CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y -# end of ESP NETIF Adapter - -# -# Driver configurations -# - -# -# ADC configuration -# -# CONFIG_ADC_FORCE_XPD_FSM is not set -CONFIG_ADC_DISABLE_DAC=y -# end of ADC configuration - -# -# SPI configuration -# -# CONFIG_SPI_MASTER_IN_IRAM is not set -CONFIG_SPI_MASTER_ISR_IN_IRAM=y -# CONFIG_SPI_SLAVE_IN_IRAM is not set -CONFIG_SPI_SLAVE_ISR_IN_IRAM=y -# end of SPI configuration - -# -# UART configuration -# -# CONFIG_UART_ISR_IN_IRAM is not set -# end of UART configuration - -# -# RTCIO configuration -# -# CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC is not set -# end of RTCIO configuration -# end of Driver configurations - -# -# Core dump -# -# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set -# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set -CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y -# end of Core dump - -# -# ESP HTTPS OTA -# -# CONFIG_OTA_ALLOW_HTTP is not set -# end of ESP HTTPS OTA - -# -# Heap memory debugging -# -CONFIG_HEAP_POISONING_DISABLED=y -# CONFIG_HEAP_POISONING_LIGHT is not set -# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set -CONFIG_HEAP_TRACING_OFF=y -# CONFIG_HEAP_TRACING_STANDALONE is not set -# CONFIG_HEAP_TRACING_TOHOST is not set -# end of Heap memory debugging - -# -# ESP32-specific -# -CONFIG_ESP32_REV_MIN_0=y -# CONFIG_ESP32_REV_MIN_1 is not set -# CONFIG_ESP32_REV_MIN_2 is not set -# CONFIG_ESP32_REV_MIN_3 is not set -CONFIG_ESP32_REV_MIN=0 -CONFIG_ESP32_DPORT_WORKAROUND=y -# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set -CONFIG_ESP32_DEFAULT_CPU_FREQ_160=y -# CONFIG_ESP32_DEFAULT_CPU_FREQ_240 is not set -CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=160 -# CONFIG_ESP32_SPIRAM_SUPPORT is not set -# CONFIG_ESP32_TRAX is not set -CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0 -# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 -# CONFIG_ESP32_ULP_COPROC_ENABLED is not set -CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0 -# CONFIG_ESP32_PANIC_PRINT_HALT is not set -CONFIG_ESP32_PANIC_PRINT_REBOOT=y -# CONFIG_ESP32_PANIC_SILENT_REBOOT is not set -# CONFIG_ESP32_PANIC_GDBSTUB is not set -CONFIG_ESP32_DEBUG_OCDAWARE=y -CONFIG_ESP32_BROWNOUT_DET=y -CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set -CONFIG_ESP32_BROWNOUT_DET_LVL=0 -CONFIG_ESP32_REDUCE_PHY_TX_POWER=y -CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y -# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set -CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y -# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set -# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set -# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set -CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024 -CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 -CONFIG_ESP32_XTAL_FREQ_40=y -# CONFIG_ESP32_XTAL_FREQ_26 is not set -# CONFIG_ESP32_XTAL_FREQ_AUTO is not set -CONFIG_ESP32_XTAL_FREQ=40 -# CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE is not set -# CONFIG_ESP32_NO_BLOBS is not set -# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set -# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set -CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5 -# end of ESP32-specific - -# -# Power Management -# -# CONFIG_PM_ENABLE is not set -# end of Power Management - -# -# ESP-TLS -# -CONFIG_ESP_TLS_USING_MBEDTLS=y -# CONFIG_ESP_TLS_SERVER is not set -# CONFIG_ESP_TLS_PSK_VERIFICATION is not set -# end of ESP-TLS - -# -# CoAP Configuration -# -CONFIG_COAP_MBEDTLS_PSK=y -# CONFIG_COAP_MBEDTLS_PKI is not set -# CONFIG_COAP_MBEDTLS_DEBUG is not set -CONFIG_COAP_LOG_DEFAULT_LEVEL=0 -# end of CoAP Configuration - -# -# FAT Filesystem support -# -# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set -CONFIG_FATFS_CODEPAGE_437=y -# CONFIG_FATFS_CODEPAGE_720 is not set -# CONFIG_FATFS_CODEPAGE_737 is not set -# CONFIG_FATFS_CODEPAGE_771 is not set -# CONFIG_FATFS_CODEPAGE_775 is not set -# CONFIG_FATFS_CODEPAGE_850 is not set -# CONFIG_FATFS_CODEPAGE_852 is not set -# CONFIG_FATFS_CODEPAGE_855 is not set -# CONFIG_FATFS_CODEPAGE_857 is not set -# CONFIG_FATFS_CODEPAGE_860 is not set -# CONFIG_FATFS_CODEPAGE_861 is not set -# CONFIG_FATFS_CODEPAGE_862 is not set -# CONFIG_FATFS_CODEPAGE_863 is not set -# CONFIG_FATFS_CODEPAGE_864 is not set -# CONFIG_FATFS_CODEPAGE_865 is not set -# CONFIG_FATFS_CODEPAGE_866 is not set -# CONFIG_FATFS_CODEPAGE_869 is not set -# CONFIG_FATFS_CODEPAGE_932 is not set -# CONFIG_FATFS_CODEPAGE_936 is not set -# CONFIG_FATFS_CODEPAGE_949 is not set -# CONFIG_FATFS_CODEPAGE_950 is not set -CONFIG_FATFS_CODEPAGE=437 -CONFIG_FATFS_LFN_NONE=y -# CONFIG_FATFS_LFN_HEAP is not set -# CONFIG_FATFS_LFN_STACK is not set -CONFIG_FATFS_FS_LOCK=0 -CONFIG_FATFS_TIMEOUT_MS=10000 -CONFIG_FATFS_PER_FILE_CACHE=y -# end of FAT Filesystem support - -# -# OpenSSL -# -# CONFIG_OPENSSL_DEBUG is not set -# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set -CONFIG_OPENSSL_ASSERT_EXIT=y -# end of OpenSSL - -# -# GDB Stub -# -# end of GDB Stub - -# -# eFuse Bit Manager -# -# CONFIG_EFUSE_CUSTOM_TABLE is not set -# CONFIG_EFUSE_VIRTUAL is not set -# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set -CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y -# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set -CONFIG_EFUSE_MAX_BLK_LEN=192 -# end of eFuse Bit Manager - -# -# Wi-Fi Provisioning Manager -# -CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 -CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 -# end of Wi-Fi Provisioning Manager - -# -# mbedTLS -# -CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y -# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set -# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set -CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y -CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 -CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 -# CONFIG_MBEDTLS_DEBUG is not set -# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set -# CONFIG_MBEDTLS_CMAC_C is not set -CONFIG_MBEDTLS_HARDWARE_AES=y -CONFIG_MBEDTLS_HARDWARE_MPI=y -CONFIG_MBEDTLS_HARDWARE_SHA=y -CONFIG_MBEDTLS_HAVE_TIME=y -# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set -CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y -# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set -# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set -# CONFIG_MBEDTLS_TLS_DISABLED is not set -CONFIG_MBEDTLS_TLS_SERVER=y -CONFIG_MBEDTLS_TLS_CLIENT=y -CONFIG_MBEDTLS_TLS_ENABLED=y - -# -# TLS Key Exchange Methods -# -# CONFIG_MBEDTLS_PSK_MODES is not set -CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y -# end of TLS Key Exchange Methods - -CONFIG_MBEDTLS_SSL_RENEGOTIATION=y -# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set -CONFIG_MBEDTLS_SSL_PROTO_TLS1=y -CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y -CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y -# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set -CONFIG_MBEDTLS_SSL_ALPN=y -CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y -CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y - -# -# Symmetric Ciphers -# -CONFIG_MBEDTLS_AES_C=y -# CONFIG_MBEDTLS_CAMELLIA_C is not set -# CONFIG_MBEDTLS_DES_C is not set -CONFIG_MBEDTLS_RC4_DISABLED=y -# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set -# CONFIG_MBEDTLS_RC4_ENABLED is not set -# CONFIG_MBEDTLS_BLOWFISH_C is not set -# CONFIG_MBEDTLS_XTEA_C is not set -CONFIG_MBEDTLS_CCM_C=y -CONFIG_MBEDTLS_GCM_C=y -# end of Symmetric Ciphers - -# CONFIG_MBEDTLS_RIPEMD160_C is not set - -# -# Certificates -# -CONFIG_MBEDTLS_PEM_PARSE_C=y -CONFIG_MBEDTLS_PEM_WRITE_C=y -CONFIG_MBEDTLS_X509_CRL_PARSE_C=y -CONFIG_MBEDTLS_X509_CSR_PARSE_C=y -# end of Certificates - -CONFIG_MBEDTLS_ECP_C=y -CONFIG_MBEDTLS_ECDH_C=y -CONFIG_MBEDTLS_ECDSA_C=y -CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y -CONFIG_MBEDTLS_ECP_NIST_OPTIM=y -# CONFIG_MBEDTLS_SECURITY_RISKS is not set -# end of mbedTLS - -# -# jsmn -# -# CONFIG_JSMN_PARENT_LINKS is not set -# CONFIG_JSMN_STRICT is not set -# end of jsmn - -# -# Virtual file system -# -CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_VFS_SUPPORT_TERMIOS=y - -# -# Host File System I/O (Semihosting) -# -CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 -# end of Host File System I/O (Semihosting) -# end of Virtual file system - -# -# Common ESP-related -# -# CONFIG_ESP_TIMER_PROFILING is not set -CONFIG_ESP_ERR_TO_NAME_LOOKUP=y -CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 -CONFIG_ESP_IPC_TASK_STACK_SIZE=1024 -CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y -CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 -CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 -CONFIG_ESP_CONSOLE_UART_DEFAULT=y -# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set -# CONFIG_ESP_CONSOLE_UART_NONE is not set -CONFIG_ESP_CONSOLE_UART_NUM=0 -CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 -CONFIG_ESP_INT_WDT=y -CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 -CONFIG_ESP_INT_WDT_CHECK_CPU1=y -CONFIG_ESP_TASK_WDT=y -# CONFIG_ESP_TASK_WDT_PANIC is not set -CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -# CONFIG_ESP_PANIC_HANDLER_IRAM is not set -# end of Common ESP-related - -# -# PThreads -# -CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 -CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 -CONFIG_PTHREAD_STACK_MIN=768 -CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y -# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set -# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set -CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 -CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" -# end of PThreads - -# -# LWIP -# -CONFIG_LWIP_LOCAL_HOSTNAME="espressif" -CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y -# CONFIG_LWIP_L2_TO_L3_COPY is not set -# CONFIG_LWIP_IRAM_OPTIMIZATION is not set -CONFIG_LWIP_TIMERS_ONDEMAND=y -CONFIG_LWIP_MAX_SOCKETS=10 -# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set -# CONFIG_LWIP_SO_LINGER is not set -CONFIG_LWIP_SO_REUSE=y -CONFIG_LWIP_SO_REUSE_RXTOALL=y -# CONFIG_LWIP_SO_RCVBUF is not set -# CONFIG_LWIP_NETBUF_RECVINFO is not set -CONFIG_LWIP_IP_FRAG=y -# CONFIG_LWIP_IP_REASSEMBLY is not set -# CONFIG_LWIP_STATS is not set -# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set -CONFIG_LWIP_ESP_GRATUITOUS_ARP=y -CONFIG_LWIP_GARP_TMR_INTERVAL=60 -CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 -CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y -# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set - -# -# DHCP server -# -CONFIG_LWIP_DHCPS_LEASE_UNIT=60 -CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 -# end of DHCP server - -# CONFIG_LWIP_AUTOIP is not set -# CONFIG_LWIP_IPV6_AUTOCONFIG is not set -CONFIG_LWIP_NETIF_LOOPBACK=y -CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 - -# -# TCP -# -CONFIG_LWIP_MAX_ACTIVE_TCP=16 -CONFIG_LWIP_MAX_LISTENING_TCP=16 -CONFIG_LWIP_TCP_MAXRTX=12 -CONFIG_LWIP_TCP_SYNMAXRTX=6 -CONFIG_LWIP_TCP_MSS=1440 -CONFIG_LWIP_TCP_TMR_INTERVAL=250 -CONFIG_LWIP_TCP_MSL=60000 -CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 -CONFIG_LWIP_TCP_WND_DEFAULT=5744 -CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 -CONFIG_LWIP_TCP_QUEUE_OOSEQ=y -# CONFIG_LWIP_TCP_SACK_OUT is not set -# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set -CONFIG_LWIP_TCP_OVERSIZE_MSS=y -# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set -# end of TCP - -# -# UDP -# -CONFIG_LWIP_MAX_UDP_PCBS=16 -CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 -# end of UDP - -CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set -CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_LWIP_PPP_SUPPORT is not set - -# -# ICMP -# -# CONFIG_LWIP_MULTICAST_PING is not set -# CONFIG_LWIP_BROADCAST_PING is not set -# end of ICMP - -# -# LWIP RAW API -# -CONFIG_LWIP_MAX_RAW_PCBS=16 -# end of LWIP RAW API - -# -# SNTP -# -CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1 -CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 -# end of SNTP -# end of LWIP - -# -# FreeRTOS -# -# CONFIG_FREERTOS_UNICORE is not set -CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF -CONFIG_FREERTOS_CORETIMER_0=y -# CONFIG_FREERTOS_CORETIMER_1 is not set -CONFIG_FREERTOS_HZ=100 -CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set -CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y -# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set -CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y -CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 -CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y -# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set -# CONFIG_FREERTOS_ASSERT_DISABLE is not set -CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 -CONFIG_FREERTOS_ISR_STACKSIZE=1536 -# CONFIG_FREERTOS_LEGACY_HOOKS is not set -CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 -# CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION is not set -CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 -CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 -CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 -CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 -# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set -# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set -# CONFIG_FREERTOS_DEBUG_INTERNALS is not set -CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y -CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y -# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set -CONFIG_FREERTOS_DEBUG_OCDAWARE=y -# end of FreeRTOS - -# -# ESP-MQTT Configurations -# -CONFIG_MQTT_PROTOCOL_311=y -CONFIG_MQTT_TRANSPORT_SSL=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y -# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set -# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set -# CONFIG_MQTT_CUSTOM_OUTBOX is not set -# end of ESP-MQTT Configurations - -# -# Wi-Fi -# -CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 -CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_STATIC_TX_BUFFER is not set -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y -CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 -CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_CSI_ENABLED is not set -CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y -CONFIG_ESP32_WIFI_TX_BA_WIN=6 -CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP32_WIFI_RX_BA_WIN=6 -CONFIG_ESP32_WIFI_NVS_ENABLED=y -CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y -# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set -CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 -CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 -# CONFIG_ESP32_WIFI_DEBUG_LOG_ENABLE is not set -CONFIG_ESP32_WIFI_IRAM_OPT=y -CONFIG_ESP32_WIFI_RX_IRAM_OPT=y -CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y -# end of Wi-Fi - -# -# PHY -# -CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP32_PHY_MAX_TX_POWER=20 -# end of PHY - -# -# ESP HTTPS server -# -# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set -# end of ESP HTTPS server - -# -# SRA Board Component Config -# - -# -# Servo motor configuration -# - -# -# Servo A -# -CONFIG_SERVO_A_MIN_PULSEWIDTH=500 -CONFIG_SERVO_A_MAX_PULSEWIDTH=1550 -CONFIG_SERVO_A_MAX_DEGREE=180 -# end of Servo A - -# -# Servo B -# -CONFIG_SERVO_B_MIN_PULSEWIDTH=500 -CONFIG_SERVO_B_MAX_PULSEWIDTH=1550 -CONFIG_SERVO_B_MAX_DEGREE=180 -# end of Servo B - -# -# Servo C -# -CONFIG_SERVO_C_MIN_PULSEWIDTH=500 -CONFIG_SERVO_C_MAX_PULSEWIDTH=1550 -CONFIG_SERVO_C_MAX_DEGREE=180 -# end of Servo C -# end of Servo motor configuration - -CONFIG_NUMBER_OF_SAMPLES=64 -# end of SRA Board Component Config -# end of Component config - -# -# Compatibility options -# -# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set -# end of Compatibility options - -# Deprecated options for backward compatibility -CONFIG_TOOLPREFIX="xtensa-esp32-elf-" -# CONFIG_FLASHMODE_QIO is not set -# CONFIG_FLASHMODE_QOUT is not set -CONFIG_FLASHMODE_DIO=y -# CONFIG_FLASHMODE_DOUT is not set -# CONFIG_MONITOR_BAUD_9600B is not set -# CONFIG_MONITOR_BAUD_57600B is not set -CONFIG_MONITOR_BAUD_115200B=y -# CONFIG_MONITOR_BAUD_230400B is not set -# CONFIG_MONITOR_BAUD_921600B is not set -# CONFIG_MONITOR_BAUD_2MB is not set -# CONFIG_MONITOR_BAUD_OTHER is not set -CONFIG_MONITOR_BAUD_OTHER_VAL=115200 -CONFIG_MONITOR_BAUD=115200 -# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set -CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y -# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set -CONFIG_LOG_BOOTLOADER_LEVEL=3 -# CONFIG_APP_ROLLBACK_ENABLE is not set -# CONFIG_FLASH_ENCRYPTION_ENABLED is not set -CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y -# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set -CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y -# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set -# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set -# CONFIG_CXX_EXCEPTIONS is not set -CONFIG_STACK_CHECK_NONE=y -# CONFIG_STACK_CHECK_NORM is not set -# CONFIG_STACK_CHECK_STRONG is not set -# CONFIG_STACK_CHECK_ALL is not set -# CONFIG_WARN_WRITE_STRINGS is not set -# CONFIG_DISABLE_GCC8_WARNINGS is not set -# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set -CONFIG_ESP32_APPTRACE_DEST_NONE=y -CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y -# CONFIG_EVENT_LOOP_PROFILING is not set -CONFIG_POST_EVENTS_FROM_ISR=y -CONFIG_POST_EVENTS_FROM_IRAM_ISR=y -CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150 -CONFIG_MB_MASTER_DELAY_MS_CONVERT=200 -CONFIG_MB_QUEUE_LENGTH=20 -CONFIG_MB_SERIAL_TASK_STACK_SIZE=2048 -CONFIG_MB_SERIAL_BUF_SIZE=256 -CONFIG_MB_SERIAL_TASK_PRIO=10 -# CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT is not set -CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20 -CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 -CONFIG_MB_CONTROLLER_STACK_SIZE=4096 -CONFIG_MB_EVENT_QUEUE_TIMEOUT=20 -CONFIG_MB_TIMER_PORT_ENABLED=y -CONFIG_MB_TIMER_GROUP=0 -CONFIG_MB_TIMER_INDEX=0 -CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=0 -CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=0 -CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0 -CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0 -CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y -# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set -# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set -CONFIG_ADC2_DISABLE_DAC=y -# CONFIG_SPIRAM_SUPPORT is not set -CONFIG_TRACEMEM_RESERVE_DRAM=0x0 -# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set -CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y -CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4 -# CONFIG_ULP_COPROC_ENABLED is not set -CONFIG_ULP_COPROC_RESERVE_MEM=0 -CONFIG_BROWNOUT_DET=y -CONFIG_BROWNOUT_DET_LVL_SEL_0=y -# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set -CONFIG_BROWNOUT_DET_LVL=0 -CONFIG_REDUCE_PHY_TX_POWER=y -CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y -# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set -# CONFIG_DISABLE_BASIC_ROM_CONSOLE is not set -# CONFIG_NO_BLOBS is not set -# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set -CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_SUPPORT_TERMIOS=y -CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_MAIN_TASK_STACK_SIZE=3584 -CONFIG_IPC_TASK_STACK_SIZE=1024 -CONFIG_TIMER_TASK_STACK_SIZE=3584 -CONFIG_CONSOLE_UART_DEFAULT=y -# CONFIG_CONSOLE_UART_CUSTOM is not set -# CONFIG_CONSOLE_UART_NONE is not set -CONFIG_CONSOLE_UART_NUM=0 -CONFIG_CONSOLE_UART_BAUDRATE=115200 -CONFIG_INT_WDT=y -CONFIG_INT_WDT_TIMEOUT_MS=300 -CONFIG_INT_WDT_CHECK_CPU1=y -CONFIG_TASK_WDT=y -# CONFIG_TASK_WDT_PANIC is not set -CONFIG_TASK_WDT_TIMEOUT_S=5 -CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 -CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 -CONFIG_ESP32_PTHREAD_STACK_MIN=768 -CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y -# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set -# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set -CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 -CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" -# CONFIG_L2_TO_L3_COPY is not set -# CONFIG_USE_ONLY_LWIP_SELECT is not set -CONFIG_ESP_GRATUITOUS_ARP=y -CONFIG_GARP_TMR_INTERVAL=60 -CONFIG_TCPIP_RECVMBOX_SIZE=32 -CONFIG_TCP_MAXRTX=12 -CONFIG_TCP_SYNMAXRTX=6 -CONFIG_TCP_MSS=1440 -CONFIG_TCP_MSL=60000 -CONFIG_TCP_SND_BUF_DEFAULT=5744 -CONFIG_TCP_WND_DEFAULT=5744 -CONFIG_TCP_RECVMBOX_SIZE=6 -CONFIG_TCP_QUEUE_OOSEQ=y -# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set -CONFIG_TCP_OVERSIZE_MSS=y -# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_TCP_OVERSIZE_DISABLE is not set -CONFIG_UDP_RECVMBOX_SIZE=6 -CONFIG_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set -# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set -CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_PPP_SUPPORT is not set -# CONFIG_SUPPORT_STATIC_ALLOCATION is not set -CONFIG_TIMER_TASK_PRIORITY=1 -CONFIG_TIMER_TASK_STACK_DEPTH=2048 -CONFIG_TIMER_QUEUE_LENGTH=10 -# End of deprecated options diff --git a/include/bar_graph.h b/include/bar_graph.h index b70ddc0..8cc80e0 100644 --- a/include/bar_graph.h +++ b/include/bar_graph.h @@ -33,7 +33,6 @@ #include "esp_log.h" #include "esp_err.h" #include "pin_defs.h" -//#include "motor_driver.h" /** * It will check for state of motor driver A, and accordingly init the free gpios. diff --git a/include/mcpwm_interface.h b/include/mcpwm_interface.h index 5b06395..97e22b8 100644 --- a/include/mcpwm_interface.h +++ b/include/mcpwm_interface.h @@ -1,3 +1,27 @@ +/* + * MIT License + * + * Copyright (c) 2021 Society of Robotics and Automation + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + #pragma once #include diff --git a/include/motor_driver.h b/include/motor_driver.h index f2fafeb..d6e071d 100644 --- a/include/motor_driver.h +++ b/include/motor_driver.h @@ -1,3 +1,27 @@ +/* + * MIT License + * + * Copyright (c) 2021 Society of Robotics and Automation + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + #pragma once #include "esp_err.h" diff --git a/src/bar_graph.c b/src/bar_graph.c index 4cda119..1e8942d 100644 --- a/src/bar_graph.c +++ b/src/bar_graph.c @@ -36,54 +36,54 @@ static const uint8_t bitmask[3] = {0xFF, 0xCF, 0x0F}; // Just an array of pins used by bar graph led static const int pin_out[8] = {BG_LED_1, BG_LED_2, BG_LED_3, BG_LED_4, BG_LED_5, BG_LED_6, BG_LED_7, BG_LED_8}; -// esp_err_t enable_bar_graph() -// { -// uint64_t bit_mask = 0; -// // motor driver a is off so we can use IN1 - IN8 pins -// if (read_motor_driver_mode(a) == 0) -// { -// bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_3) | (1ULL << BG_LED_4) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); -// enabled_bar_graph_flag = 0; -// } -// // motor driver a is in parallel mode, so we can use IN1, IN2, IN5 - IN8 pins -// else if (read_motor_driver_mode(a) == 1) -// { -// bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); -// enabled_bar_graph_flag = 1; -// } -// // motor driver a is in normal mode, so we can use IN5, IN6, IN7, IN8 pins -// else if (read_motor_driver_mode(a) == 2) -// { -// bit_mask = (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); -// enabled_bar_graph_flag = 2; -// } +esp_err_t enable_bar_graph() +{ + uint64_t bit_mask = 0; + // motor driver a is off so we can use IN1 - IN8 pins + if (read_motor_driver_mode(a) == 0) + { + bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_3) | (1ULL << BG_LED_4) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); + enabled_bar_graph_flag = 0; + } + // motor driver a is in parallel mode, so we can use IN1, IN2, IN5 - IN8 pins + else if (read_motor_driver_mode(a) == 1) + { + bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); + enabled_bar_graph_flag = 1; + } + // motor driver a is in normal mode, so we can use IN5, IN6, IN7, IN8 pins + else if (read_motor_driver_mode(a) == 2) + { + bit_mask = (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); + enabled_bar_graph_flag = 2; + } -// gpio_config_t io_conf; -// // bit mask for the pins, each bit maps to a GPIO -// io_conf.pin_bit_mask = bit_mask; -// // set gpio mode to input -// io_conf.mode = GPIO_MODE_OUTPUT; -// // enable pull up resistors -// io_conf.pull_up_en = 0; -// // disable pull down resistors -// io_conf.pull_down_en = 1; -// // disable gpio interrupts -// io_conf.intr_type = GPIO_INTR_DISABLE; -// // detailed description can be found at https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/gpio.html#_CPPv413gpio_config_t + gpio_config_t io_conf; + // bit mask for the pins, each bit maps to a GPIO + io_conf.pin_bit_mask = bit_mask; + // set gpio mode to input + io_conf.mode = GPIO_MODE_OUTPUT; + // enable pull up resistors + io_conf.pull_up_en = 0; + // disable pull down resistors + io_conf.pull_down_en = 1; + // disable gpio interrupts + io_conf.intr_type = GPIO_INTR_DISABLE; + // detailed description can be found at https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/peripherals/gpio.html#_CPPv413gpio_config_t -// esp_err_t err = gpio_config(&io_conf); -// if (err == ESP_OK) -// { -// ESP_LOGI(TAG_BAR_GRAPH, "enabled bar graph leds in mode: %d", enabled_bar_graph_flag); -// } -// else -// { -// ESP_LOGE(TAG_BAR_GRAPH, "error: %s", esp_err_to_name(err)); -// enabled_bar_graph_flag = 0; -// } + esp_err_t err = gpio_config(&io_conf); + if (err == ESP_OK) + { + ESP_LOGI(TAG_BAR_GRAPH, "enabled bar graph leds in mode: %d", enabled_bar_graph_flag); + } + else + { + ESP_LOGE(TAG_BAR_GRAPH, "error: %s", esp_err_to_name(err)); + enabled_bar_graph_flag = 0; + } -// return err; -// } + return err; +} esp_err_t set_bar_graph(uint8_t data) { diff --git a/src/mcpwm_interface.c b/src/mcpwm_interface.c index a3819dd..6c84dba 100644 --- a/src/mcpwm_interface.c +++ b/src/mcpwm_interface.c @@ -1,3 +1,27 @@ +/* + * MIT License + * + * Copyright (c) 2021 Society of Robotics and Automation + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + #include #include #include diff --git a/src/motor_driver.c b/src/motor_driver.c index af689e3..a33217d 100644 --- a/src/motor_driver.c +++ b/src/motor_driver.c @@ -1,3 +1,27 @@ +/* + * MIT License + * + * Copyright (c) 2021 Society of Robotics and Automation + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + #include "esp_log.h" #include "esp_check.h" #include "motor_driver.h" From bf23d26e24b3996bedca40562ef8d45727e16e20 Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 31 Jan 2024 18:23:57 +0530 Subject: [PATCH 03/11] Add get_motor_driver_status function --- include/motor_driver.h | 8 ++++++++ src/motor_driver.c | 9 ++++++++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/include/motor_driver.h b/include/motor_driver.h index d6e071d..6d84eb6 100644 --- a/include/motor_driver.h +++ b/include/motor_driver.h @@ -55,3 +55,11 @@ esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id); * - ESP_FAIL if any error occurs */ esp_err_t set_motor_speed(motor_handle_t motor, int direction, float duty_cycle); + + +/** + * @brief Checks if the motor driver is engaged. + * + * @return true if the motor driver is engaged, false otherwise. + */ +int get_motor_driver_status(); \ No newline at end of file diff --git a/src/motor_driver.c b/src/motor_driver.c index a33217d..26814b3 100644 --- a/src/motor_driver.c +++ b/src/motor_driver.c @@ -30,6 +30,8 @@ static const char *TAG = "MOTOR"; +static int enabled_motor_driver_flag = 0; + esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id) { motor_config_t motor_config; if(motor_id == MOTOR_A_0){ @@ -49,6 +51,7 @@ esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id) { motor_mcpwm_config.resolution_hz = 10000000; // 10MHz ESP_ERROR_CHECK(motor_new_mcpwm_device(&motor_config, &motor_mcpwm_config, motor)); ESP_ERROR_CHECK((*motor)->enable(*motor)); + enabled_motor_driver_flag = 1; return ESP_OK; } @@ -63,10 +66,14 @@ esp_err_t set_motor_speed(motor_handle_t motor, int direction, float speed) { motor->set_speed(motor, speed); return ESP_OK; } else if(direction == MOTOR_STOP){ - motor->brake(motor); + motor->set_speed(motor, 0); return ESP_OK; } else { ESP_LOGE(TAG, "Invalid motor direction"); return ESP_FAIL; } } + +int get_motor_driver_status() { + return enabled_motor_driver_flag; +} From 83850f69ff87cff47850bda3a052be7aecf372d7 Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 31 Jan 2024 18:24:11 +0530 Subject: [PATCH 04/11] update bitmask in bar_graph.c --- include/bar_graph.h | 1 + src/bar_graph.c | 16 +++++----------- 2 files changed, 6 insertions(+), 11 deletions(-) diff --git a/include/bar_graph.h b/include/bar_graph.h index 8cc80e0..ff8f36e 100644 --- a/include/bar_graph.h +++ b/include/bar_graph.h @@ -33,6 +33,7 @@ #include "esp_log.h" #include "esp_err.h" #include "pin_defs.h" +#include "motor_driver.h" /** * It will check for state of motor driver A, and accordingly init the free gpios. diff --git a/src/bar_graph.c b/src/bar_graph.c index 1e8942d..fd95fac 100644 --- a/src/bar_graph.c +++ b/src/bar_graph.c @@ -31,8 +31,8 @@ static int enabled_bar_graph_flag = 0; // pins IN1 - IN4 are usable in the bar graph, as pins IN5 - IN8 are connected to pins of motor driver B and these cannot be used. // So, bit mask sets bits of IN5 - IN8 as 0 and that of IN1 - IN4 as 1, because if we set pins used by mcpwm, esp32 will crash or behave oddly. // IN1 is the leftmost bit and IN8 is the rightmost bit -static const uint8_t bitmask[3] = {0xFF, 0xCF, 0x0F}; -// state 0 1 2 +static const uint8_t bitmask[3] = {0xFF, 0x0F}; +// state 0 1 // Just an array of pins used by bar graph led static const int pin_out[8] = {BG_LED_1, BG_LED_2, BG_LED_3, BG_LED_4, BG_LED_5, BG_LED_6, BG_LED_7, BG_LED_8}; @@ -40,22 +40,16 @@ esp_err_t enable_bar_graph() { uint64_t bit_mask = 0; // motor driver a is off so we can use IN1 - IN8 pins - if (read_motor_driver_mode(a) == 0) + if (get_motor_driver_status() == 0) { bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_3) | (1ULL << BG_LED_4) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); enabled_bar_graph_flag = 0; } - // motor driver a is in parallel mode, so we can use IN1, IN2, IN5 - IN8 pins - else if (read_motor_driver_mode(a) == 1) - { - bit_mask = (1ULL << BG_LED_1) | (1ULL << BG_LED_2) | (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); - enabled_bar_graph_flag = 1; - } // motor driver a is in normal mode, so we can use IN5, IN6, IN7, IN8 pins - else if (read_motor_driver_mode(a) == 2) + else if (get_motor_driver_status() == 1) { bit_mask = (1ULL << BG_LED_5) | (1ULL << BG_LED_6) | (1ULL << BG_LED_7) | (1ULL << BG_LED_8); - enabled_bar_graph_flag = 2; + enabled_bar_graph_flag = 1; } gpio_config_t io_conf; From 59f299de0da794d29afb3d402802d3960ba7a893 Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 31 Jan 2024 19:17:01 +0530 Subject: [PATCH 05/11] Fix header file include guards --- include/mcpwm_interface.h | 5 ++++- include/motor_driver.h | 7 +++++-- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/include/mcpwm_interface.h b/include/mcpwm_interface.h index 97e22b8..632a77f 100644 --- a/include/mcpwm_interface.h +++ b/include/mcpwm_interface.h @@ -22,7 +22,8 @@ * SOFTWARE. */ -#pragma once +#ifndef MCPWM_INTERFACE_H +#define MCPWM_INTERFACE_H #include #include "esp_err.h" @@ -131,3 +132,5 @@ typedef struct { * - ESP_FAIL: Create BDC Motor handle failed because some other error */ esp_err_t motor_new_mcpwm_device(const motor_config_t *motor_config, const motor_mcpwm_config_t *mcpwm_config, motor_t** ret_motor); + +#endif \ No newline at end of file diff --git a/include/motor_driver.h b/include/motor_driver.h index 6d84eb6..a0ec97d 100644 --- a/include/motor_driver.h +++ b/include/motor_driver.h @@ -22,7 +22,8 @@ * SOFTWARE. */ -#pragma once +#ifndef MOTOR_DRIVER_H +#define MOTOR_DRIVER_H #include "esp_err.h" #include "mcpwm_interface.h" @@ -62,4 +63,6 @@ esp_err_t set_motor_speed(motor_handle_t motor, int direction, float duty_cycle) * * @return true if the motor driver is engaged, false otherwise. */ -int get_motor_driver_status(); \ No newline at end of file +int get_motor_driver_status(); + +#endif \ No newline at end of file From b58618169208bf2066584850e08a447c05677b9b Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 31 Jan 2024 19:18:05 +0530 Subject: [PATCH 06/11] Update motor driver configuration to have macros for frequency and resolution --- include/motor_driver.h | 2 ++ src/motor_driver.c | 8 ++++---- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/include/motor_driver.h b/include/motor_driver.h index a0ec97d..7dc2ff0 100644 --- a/include/motor_driver.h +++ b/include/motor_driver.h @@ -35,6 +35,8 @@ #define MOTOR_BACKWARD 201 #define MOTOR_STOP 202 +#define MCPWM_FREQ 20000 +#define MCPWM_RESOLUTION 10000000 /** * @brief Enable motor driver * @param motor_handle_t Motor object handle diff --git a/src/motor_driver.c b/src/motor_driver.c index 26814b3..4aec5e3 100644 --- a/src/motor_driver.c +++ b/src/motor_driver.c @@ -37,18 +37,18 @@ esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id) { if(motor_id == MOTOR_A_0){ motor_config.pwma_gpio_num = MDA_NORMAL_IN_1, motor_config.pwmb_gpio_num = MDA_NORMAL_IN_2, - motor_config.pwm_freq_hz = 20000; // 20kHz PWM frequency + motor_config.pwm_freq_hz = MCPWM_FREQ; // 20kHz PWM frequency } else if(motor_id == MOTOR_A_1) { motor_config.pwma_gpio_num = MDA_NORMAL_IN_3, motor_config.pwmb_gpio_num = MDA_NORMAL_IN_4, - motor_config.pwm_freq_hz = 20000; // 20kHz PWM frequency + motor_config.pwm_freq_hz = MCPWM_FREQ; // 20kHz PWM frequency } else { ESP_LOGE(TAG, "Invalid motor id"); return ESP_FAIL; } motor_mcpwm_config_t motor_mcpwm_config; motor_mcpwm_config.group_id = 0; - motor_mcpwm_config.resolution_hz = 10000000; // 10MHz + motor_mcpwm_config.resolution_hz = MCPWM_RESOLUTION; // 10MHz ESP_ERROR_CHECK(motor_new_mcpwm_device(&motor_config, &motor_mcpwm_config, motor)); ESP_ERROR_CHECK((*motor)->enable(*motor)); enabled_motor_driver_flag = 1; @@ -56,7 +56,7 @@ esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id) { } esp_err_t set_motor_speed(motor_handle_t motor, int direction, float speed) { - speed = (uint32_t)map(speed, 0, 100, 0, 500); + speed = (uint32_t)map(speed, 0, 100, 0, MCPWM_RESOLUTION / MCPWM_FREQ); if(direction == MOTOR_FORWARD){ motor->forward(motor); motor->set_speed(motor, speed); From 3b22f087238aba915fd623ba4b154c3c8ea9112e Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 31 Jan 2024 19:27:56 +0530 Subject: [PATCH 07/11] Refactor motor driver code and remove unnecessary imports --- examples/motor_driver_normal/main/main.c | 8 +++++--- src/mcpwm_interface.c | 4 ---- src/motor_driver.c | 2 -- 3 files changed, 5 insertions(+), 9 deletions(-) diff --git a/examples/motor_driver_normal/main/main.c b/examples/motor_driver_normal/main/main.c index 9efb7d2..fef01e7 100644 --- a/examples/motor_driver_normal/main/main.c +++ b/examples/motor_driver_normal/main/main.c @@ -27,19 +27,21 @@ #include "freertos/task.h" #include "sra_board.h" +static const char* TAG = "MOTOR"; + void app_main(void) { motor_handle_t motor1; enable_motor_driver(&motor1, MOTOR_A_1); while(1){ set_motor_speed(motor1, MOTOR_FORWARD, 60); - ESP_LOGI("MOTOR", "Forward"); + ESP_LOGI(TAG, "Forward"); vTaskDelay(1000 / portTICK_PERIOD_MS); set_motor_speed(motor1, MOTOR_BACKWARD, 60); - ESP_LOGI("MOTOR", "Backward"); + ESP_LOGI(TAG, "Backward"); vTaskDelay(1000 / portTICK_PERIOD_MS); set_motor_speed(motor1, MOTOR_STOP, 0); - ESP_LOGI("MOTOR", "Stop"); + ESP_LOGI(TAG, "Stop"); vTaskDelay(1000 / portTICK_PERIOD_MS); } } diff --git a/src/mcpwm_interface.c b/src/mcpwm_interface.c index 6c84dba..86eac1b 100644 --- a/src/mcpwm_interface.c +++ b/src/mcpwm_interface.c @@ -22,11 +22,7 @@ * SOFTWARE. */ -#include -#include -#include -#include "esp_log.h" #include "driver/mcpwm_prelude.h" #include "esp_check.h" #include "mcpwm_interface.h" diff --git a/src/motor_driver.c b/src/motor_driver.c index 4aec5e3..f315345 100644 --- a/src/motor_driver.c +++ b/src/motor_driver.c @@ -22,8 +22,6 @@ * SOFTWARE. */ -#include "esp_log.h" -#include "esp_check.h" #include "motor_driver.h" #include "utils.h" #include "pin_defs.h" From 0fb2c8916f16a64a2f05c1e7c3c2c116e0eef7ac Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 31 Jan 2024 19:35:10 +0530 Subject: [PATCH 08/11] Add servo.h header file, which was removed by mistake --- include/sra_board.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/sra_board.h b/include/sra_board.h index 5d019a8..f055f25 100644 --- a/include/sra_board.h +++ b/include/sra_board.h @@ -32,6 +32,7 @@ #include "mcpwm_interface.h" #include "motor_driver.h" #include "mpu6050.h" +#include "servo.h" #include "pin_defs.h" #include "utils.h" @@ -39,4 +40,4 @@ #include "oled.h" #endif -#endif +#endif \ No newline at end of file From c5e30abf8a9ff71ff07b2e4c6574e3f04369d071 Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 31 Jan 2024 20:28:50 +0530 Subject: [PATCH 09/11] Fix motor driver and remove unnecessary include --- include/motor_driver.h | 6 +++--- include/utils.h | 2 -- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/include/motor_driver.h b/include/motor_driver.h index 7dc2ff0..18150c5 100644 --- a/include/motor_driver.h +++ b/include/motor_driver.h @@ -43,8 +43,8 @@ * @param motor_id set it as MOTOR_A_0, MOTOR_A_1 to select the appropriate motor to bind to the handle. * @return * - ESP_OK: Success - * - ESP_ERR_INVALID_ARG: Invalid argument - * - ESP_FAIL: Failed + * - ESP_ERR_INVALID_ARG: Invalid argument + * - ESP_FAIL: Failed */ esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id); @@ -67,4 +67,4 @@ esp_err_t set_motor_speed(motor_handle_t motor, int direction, float duty_cycle) */ int get_motor_driver_status(); -#endif \ No newline at end of file +#endif diff --git a/include/utils.h b/include/utils.h index 3d6bc56..5168e0f 100644 --- a/include/utils.h +++ b/include/utils.h @@ -25,8 +25,6 @@ #ifndef _UTILS_H #define _UTILS_H -#include "esp_log.h" - /** * @brief Bound a value in a range [min, max] * From 2071ad3bb0f238bbe1c2f59d497cf7bbed91562e Mon Sep 17 00:00:00 2001 From: Zain Date: Wed, 31 Jan 2024 20:40:13 +0530 Subject: [PATCH 10/11] Add esp_log.h include --- include/motor_driver.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/motor_driver.h b/include/motor_driver.h index 18150c5..44c27e6 100644 --- a/include/motor_driver.h +++ b/include/motor_driver.h @@ -26,6 +26,7 @@ #define MOTOR_DRIVER_H #include "esp_err.h" +#include "esp_log.h" #include "mcpwm_interface.h" #define MOTOR_A_0 100 From 7435bdc10ad7480cd938940495bf9d5a60d50a63 Mon Sep 17 00:00:00 2001 From: Zain Date: Thu, 1 Feb 2024 14:36:13 +0530 Subject: [PATCH 11/11] added description for mapping. --- src/motor_driver.c | 1 + 1 file changed, 1 insertion(+) diff --git a/src/motor_driver.c b/src/motor_driver.c index f315345..8907224 100644 --- a/src/motor_driver.c +++ b/src/motor_driver.c @@ -54,6 +54,7 @@ esp_err_t enable_motor_driver(motor_handle_t *motor, int motor_id) { } esp_err_t set_motor_speed(motor_handle_t motor, int direction, float speed) { + // map is used to map the speed from 0-100 to 0-MCPWM_TICKS. MCPWM_TICKS is the resolution of the pwm signal. It is calculated as MCPWM_TICKS = MCPWM_RESOLUTION / MCPWM_FREQ speed = (uint32_t)map(speed, 0, 100, 0, MCPWM_RESOLUTION / MCPWM_FREQ); if(direction == MOTOR_FORWARD){ motor->forward(motor);