Register v3.5.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/855

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.5.0 -m "<description of version>" e40dc65bc343d7adb1713e527d6efa9e33104606
git push origin v3.5.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/1235

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.6.0 -m "<description of version>" c985be8bd834dd53113c16b3679bc20d1b317291
git push origin v3.6.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/2798

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.6.2 -m "<description of version>" c7e81d252ced859459a8c5785c8c2722af892137
git push origin v3.6.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/3353

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.7.0 -m "<description of version>" aa684a80ba5404cfb8c2be7c379597447a2c930c
git push origin v3.7.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/4947

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.8.0 -m "<description of version>" f72eb8e4c6faced36ff1eb66b75538c231431a0b
git push origin v3.8.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request updated: JuliaRegistries/General/4947

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.8.0 -m "<description of version>" ba79f881c667556829579c3c4d146e82b794f333
git push origin v3.8.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/6064

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.8.1 -m "<description of version>" 90ec5466df22a61129c3d84665bb113cf6aafd81
git push origin v3.8.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/8879

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.8.2 -m "<description of version>" e17d3f11db5d9f4c9e75af74c6cf10468533ae8a
git push origin v3.8.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/9899

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if Julia TagBot is installed, or can be done manually through the github interface, or via:

git tag -a v3.8.3 -m "<description of version>" 4180a5b040e56c98257471e40047efd3303a4aae
git push origin v3.8.3

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Error while trying to register: "Tag with name 3.8.3 already exists and points to a different commit"

[ChrisRackauckas]

@JuliaRegistrator register()

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/96834

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.21.0 -m "<description of version>" fc4326937183f62c794385126b19f9c184428429
git push origin v4.21.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/96851

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.22.0 -m "<description of version>" b9307f79803c13c88a25c57889bd1a9b5a291ba2
git push origin v4.22.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/96976

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.22.1 -m "<description of version>" efd1a0a04a99ed68b3bc5f42e94e8e2aecbfdf09
git push origin v4.22.1

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/97669

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.24.0 -m "<description of version>" fc3452da35634dbdeb0ad1e6671099f2f8100683
git push origin v4.24.0

Also, note the warning: Version 4.24.0 skips over 4.23.0
This can be safely ignored. However, if you want to fix this you can do so. Call register() again after making the fix. This will update the Pull request.

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/97670

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.23.0 -m "<description of version>" b71dc6b6eab96e47d934958da960ae92fc40a3ea
git push origin v4.23.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/99676

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.23.2 -m "<description of version>" ce4753f518ae318f3b9a067121e9de576e2f0866
git push origin v4.23.2

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/100966

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.24.0 -m "<description of version>" 1ca5ee44d6fdc36da6a4e11b71d4450248cd64c5
git push origin v4.24.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/113371

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.25.0 -m "<description of version>" d7e83c086d40e1b5b7ce470cccfea5dfd5586ec3
git push origin v4.25.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/117042

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.26.0 -m "<description of version>" d22dbf36cfbd3b98759f3398109b3a4520e9d343
git push origin v4.26.0

[ChrisRackauckas]

@JuliaRegistrator register()

[JuliaRegistrator]

Registration pull request created: JuliaRegistries/General/118972

Tip: Release Notes

Did you know you can add release notes too? Just add markdown formatted text underneath the comment after the text
"Release notes:" and it will be added to the registry PR, and if TagBot is installed it will also be added to the
release that TagBot creates. i.e.

@JuliaRegistrator register

Release notes:

## Breaking changes

- blah

To add them here just re-invoke and the PR will be updated.

Tagging

After the above pull request is merged, it is recommended that a tag is created on this repository for the registered package version.

This will be done automatically if the Julia TagBot GitHub Action is installed, or can be done manually through the github interface, or via:

git tag -a v4.26.1 -m "<description of version>" cdde5c9cba3671ddd5f223c58b0949963e43431e
git push origin v4.26.1