0.4.1h

[alienatedsec]

Breaking changes !!!

• There is a new baseline 0.4.1h, so you need to prepare your SD card for it - follow Specifics of the yi-hack-v5 firmware and flashing #267

• The camera web page is no longer under port 8080 but back to default port 80 - access your camera web page using its IP only. Those with proxy environments or Home Assistant integrations must amend their settings.

• The new baseline is needed to fix OTA upgrade OTA FW upgrade shows no value for "Available:" #326 - cameras on earlier versions cannot upgrade from the WebUi as there is an additional baseline check - it refers to 0.4.1 for the latest release - 23a96a5

• Future non-baseline upgrades will be released without SD formatted to the FAT32 requirement.

• We need testers, so if you have no physical access to your camera - don't upgrade, as it may require fixing by downgrading etc.

What's Changed

• Reduced busybox size to address Rootfs corruption after a few months - bootloop #312
• Moved some tools from rootfs to /tmp/sd/yi-hack-v5/.../[s]bin folders
• Fixed Curl SSL crypto library
• First try to address MQTT status changes many times per second (offline/online) when RTSP server is activated (0.4.1.e) #333

What is still not working

• [0.4.1e] No timestamp watermark on stream #336 - unable to find the right sleep settings as suggested by @roleoroleo - please test and suggest if possible - it does not work on my cameras whatever I try - yi_home_1080p - 48US and yi_dome - 43US
• MQTT status changes many times per second (offline/online) when RTSP server is activated (0.4.1.e) #333 - Please, I need mqtt tested by the community

Full Changelog: 0.4.1g...0.4.1h

---

This discussion was created from the release 0.4.1h.

[Minims]

@alienatedsec no HTTP and no SSH after reboot for this release ? I will dig a bit more tomorrow. But both camera are like from factory. Cloud is working, but no access.

❯ nmap -P0 192.168.1.54
Starting Nmap 7.93 ( https://nmap.org ) at 2024-02-12 23:27 CET
Nmap scan report for 192.168.1.54
Host is up (0.0095s latency).
Not shown: 998 closed tcp ports (conn-refused)
PORT   STATE SERVICE
21/tcp open  ftp
23/tcp open  telnet

Nmap done: 1 IP address (1 host up) scanned in 0.25 seconds

[alienatedsec]

It could mean that it does not recognise the /tmp/sd/yi-hack-v5 folder.

[Minims]

Connect through port 23 is OK. I have make a mistake while copying files... It's a bit late here :-).
Sorry for the noise. I will continue testing the new release.

[alienatedsec]

Sorry for the noise. I will continue testing the new release.

@Minims I appreciate any help, even if it's a noise 😉

[Minims]

Missing a link to the binary on the sdcard ?

/home/yi-hack-v5 # vi
vi: applet not found
/home/yi-hack-v5 #

This one is OK.

/tmp/sd/yi-hack-v5 # ./bin/vi

[alienatedsec]

I thought I fixed it but must have done a reset before committing and building this release. The symlink needs to be deleted from the /bin folder and it will call the one on the SD card.

rm /bin/vi