We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Hey,
My APC paper is turning off after a couple seconds with the following info in logcat:
I/lights ( 69): set_light_backlight: state->color=0xffffffff, brightness = 255 I/power ( 69): *** set_screen_state 1 I/EventHub( 69): Removing device '/dev/input/mouse0' due to inotify event I/EventHub( 69): Removing device '/dev/input/event4' due to inotify event I/EventHub( 69): Removed device: path=/dev/input/event4 name=SIGMACHIP Usb Mouse id=19 fd=88 classes=0x80000008 I/InputReader( 69): Device removed: id=19, name='SIGMACHIP Usb Mouse', sources=0x00002002 I/GeckoDump( 69): XXX FIXME : Got a mozContentEvent: nfc-hardware-state-change I/AutoMounter( 69): UpdateState: umsAvail:1 umsEnabled:0 mode:0 usbCablePluggedIn:0 tryToShare:0 I/AutoMounter( 69): UpdateState: Volume sdcard is NoMedia and missing I/AutoMounter( 69): UpdateState: Volume udisk is NoMedia and missing I/AutoMounter( 69): UpdateState: umsAvail:1 umsEnabled:0 mode:0 usbCablePluggedIn:1 tryToShare:0 I/AutoMounter( 69): UpdateState: Volume sdcard is NoMedia and missing I/AutoMounter( 69): UpdateState: Volume udisk is NoMedia and missing E/EventHub( 69): could not get driver version for /dev/input/mouse0, Not a typewriter D/EventHub( 69): No input device configuration file found for device 'SIGMACHIP Usb Mouse'. I/EventHub( 69): New device: id=20, fd=88, path='/dev/input/event4', name='SIGMACHIP Usb Mouse', classes=0x80000008, configuration='', keyLayout='', keyCharacterMap='', builtinKeyboard=false, usingSuspendBlockIoctl=false, usingClockIoctl=false I/InputReader( 69): Device added: id=20, name='SIGMACHIP Usb Mouse', sources=0x00002002 I/GeckoDump( 69): XXX FIXME : Got a mozContentEvent: nfc-hardware-state-change I/lights ( 69): set_light_backlight: state->color=0xff000000, brightness = 0 I/power ( 69): *** set_screen_state 0
If I try like 100 times then it powers on... I have no idea why this is happening. I haven't changed anything since the last FOTA.
:-(
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Hey,
My APC paper is turning off after a couple seconds with the following info in logcat:
If I try like 100 times then it powers on... I have no idea why this is happening. I haven't changed anything since the last FOTA.
:-(
The text was updated successfully, but these errors were encountered: