Middleware provide a convenient mechanism for inspecting and filtering HTTP requests entering your application. For example, Laravel includes a middleware that verifies the user of your application is authenticated. If the user is not authenticated, the middleware will redirect the user to your application's login screen. However, if the user is authenticated, the middleware will allow the request to proceed further into the application.
Additional middleware can be written to perform a variety of tasks besides authentication. For example, a logging middleware might log all incoming requests to your application. There are several middleware included in the Laravel framework, including middleware for authentication and CSRF protection. All of these middleware are located in the app/Http/Middleware
directory.
To create a new middleware, use the make:middleware
Artisan command:
php artisan make:middleware EnsureTokenIsValid
This command will place a new EnsureTokenIsValid
class within your app/Http/Middleware
directory. In this middleware, we will only allow access to the route if the supplied token
input matches a specified value. Otherwise, we will redirect the users back to the home
URI:
<?php
namespace App\Http\Middleware;
use Closure;
use Illuminate\Http\Request;
use Symfony\Component\HttpFoundation\Response;
class EnsureTokenIsValid
{
/**
* Handle an incoming request.
*
* @param \Closure(\Illuminate\Http\Request): (\Symfony\Component\HttpFoundation\Response) $next
*/
public function handle(Request $request, Closure $next): Response
{
if ($request->input('token') !== 'my-secret-token') {
return redirect('home');
}
return $next($request);
}
}
As you can see, if the given token
does not match our secret token, the middleware will return an HTTP redirect to the client; otherwise, the request will be passed further into the application. To pass the request deeper into the application (allowing the middleware to "pass"), you should call the $next
callback with the $request
.
It's best to envision middleware as a series of "layers" HTTP requests must pass through before they hit your application. Each layer can examine the request and even reject it entirely.
Note
All middleware are resolved via the service container, so you may type-hint any dependencies you need within a middleware's constructor.
Of course, a middleware can perform tasks before or after passing the request deeper into the application. For example, the following middleware would perform some task before the request is handled by the application:
<?php
namespace App\Http\Middleware;
use Closure;
use Illuminate\Http\Request;
use Symfony\Component\HttpFoundation\Response;
class BeforeMiddleware
{
public function handle(Request $request, Closure $next): Response
{
// Perform action
return $next($request);
}
}
However, this middleware would perform its task after the request is handled by the application:
<?php
namespace App\Http\Middleware;
use Closure;
use Illuminate\Http\Request;
use Symfony\Component\HttpFoundation\Response;
class AfterMiddleware
{
public function handle(Request $request, Closure $next): Response
{
$response = $next($request);
// Perform action
return $response;
}
}
If you want a middleware to run during every HTTP request to your application, list the middleware class in the $middleware
property of your app/Http/Kernel.php
class.
If you would like to assign middleware to specific routes, you may invoke the middleware
method when defining the route:
use App\Http\Middleware\Authenticate;
Route::get('/profile', function () {
// ...
})->middleware(Authenticate::class);
You may assign multiple middleware to the route by passing an array of middleware names to the middleware
method:
Route::get('/', function () {
// ...
})->middleware([First::class, Second::class]);
For convenience, you may assign aliases to middleware in your application's app/Http/Kernel.php
file. By default, the $middlewareAliases
property of this class contains entries for the middleware included with Laravel. You may add your own middleware to this list and assign it an alias of your choosing:
// Within App\Http\Kernel class...
protected $middlewareAliases = [
'auth' => \App\Http\Middleware\Authenticate::class,
'auth.basic' => \Illuminate\Auth\Middleware\AuthenticateWithBasicAuth::class,
'bindings' => \Illuminate\Routing\Middleware\SubstituteBindings::class,
'cache.headers' => \Illuminate\Http\Middleware\SetCacheHeaders::class,
'can' => \Illuminate\Auth\Middleware\Authorize::class,
'guest' => \App\Http\Middleware\RedirectIfAuthenticated::class,
'signed' => \Illuminate\Routing\Middleware\ValidateSignature::class,
'throttle' => \Illuminate\Routing\Middleware\ThrottleRequests::class,
'verified' => \Illuminate\Auth\Middleware\EnsureEmailIsVerified::class,
];
Once the middleware alias has been defined in the HTTP kernel, you may use the alias when assigning middlware to routes:
Route::get('/profile', function () {
// ...
})->middleware('auth');
When assigning middleware to a group of routes, you may occasionally need to prevent the middleware from being applied to an individual route within the group. You may accomplish this using the withoutMiddleware
method:
use App\Http\Middleware\EnsureTokenIsValid;
Route::middleware([EnsureTokenIsValid::class])->group(function () {
Route::get('/', function () {
// ...
});
Route::get('/profile', function () {
// ...
})->withoutMiddleware([EnsureTokenIsValid::class]);
});
You may also exclude a given set of middleware from an entire group of route definitions:
use App\Http\Middleware\EnsureTokenIsValid;
Route::withoutMiddleware([EnsureTokenIsValid::class])->group(function () {
Route::get('/profile', function () {
// ...
});
});
The withoutMiddleware
method can only remove route middleware and does not apply to global middleware.
Sometimes you may want to group several middleware under a single key to make them easier to assign to routes. You may accomplish this using the $middlewareGroups
property of your HTTP kernel.
Laravel includes predefined web
and api
middleware groups that contain common middleware you may want to apply to your web and API routes. Remember, these middleware groups are automatically applied by your application's App\Providers\RouteServiceProvider
service provider to routes within your corresponding web
and api
route files:
/**
* The application's route middleware groups.
*
* @var array
*/
protected $middlewareGroups = [
'web' => [
\App\Http\Middleware\EncryptCookies::class,
\Illuminate\Cookie\Middleware\AddQueuedCookiesToResponse::class,
\Illuminate\Session\Middleware\StartSession::class,
\Illuminate\View\Middleware\ShareErrorsFromSession::class,
\App\Http\Middleware\VerifyCsrfToken::class,
\Illuminate\Routing\Middleware\SubstituteBindings::class,
],
'api' => [
\Illuminate\Routing\Middleware\ThrottleRequests::class.':api',
\Illuminate\Routing\Middleware\SubstituteBindings::class,
],
];
Middleware groups may be assigned to routes and controller actions using the same syntax as individual middleware. Again, middleware groups make it more convenient to assign many middleware to a route at once:
Route::get('/', function () {
// ...
})->middleware('web');
Route::middleware(['web'])->group(function () {
// ...
});
Note
Out of the box, theweb
andapi
middleware groups are automatically applied to your application's correspondingroutes/web.php
androutes/api.php
files by theApp\Providers\RouteServiceProvider
.
Rarely, you may need your middleware to execute in a specific order but not have control over their order when they are assigned to the route. In this case, you may specify your middleware priority using the $middlewarePriority
property of your app/Http/Kernel.php
file. This property may not exist in your HTTP kernel by default. If it does not exist, you may copy its default definition below:
/**
* The priority-sorted list of middleware.
*
* This forces non-global middleware to always be in the given order.
*
* @var string[]
*/
protected $middlewarePriority = [
\Illuminate\Foundation\Http\Middleware\HandlePrecognitiveRequests::class,
\Illuminate\Cookie\Middleware\EncryptCookies::class,
\Illuminate\Session\Middleware\StartSession::class,
\Illuminate\View\Middleware\ShareErrorsFromSession::class,
\Illuminate\Contracts\Auth\Middleware\AuthenticatesRequests::class,
\Illuminate\Routing\Middleware\ThrottleRequests::class,
\Illuminate\Routing\Middleware\ThrottleRequestsWithRedis::class,
\Illuminate\Contracts\Session\Middleware\AuthenticatesSessions::class,
\Illuminate\Routing\Middleware\SubstituteBindings::class,
\Illuminate\Auth\Middleware\Authorize::class,
];
Middleware can also receive additional parameters. For example, if your application needs to verify that the authenticated user has a given "role" before performing a given action, you could create an EnsureUserHasRole
middleware that receives a role name as an additional argument.
Additional middleware parameters will be passed to the middleware after the $next
argument:
<?php
namespace App\Http\Middleware;
use Closure;
use Illuminate\Http\Request;
use Symfony\Component\HttpFoundation\Response;
class EnsureUserHasRole
{
/**
* Handle an incoming request.
*
* @param \Closure(\Illuminate\Http\Request): (\Symfony\Component\HttpFoundation\Response) $next
*/
public function handle(Request $request, Closure $next, string $role): Response
{
if (! $request->user()->hasRole($role)) {
// Redirect...
}
return $next($request);
}
}
Middleware parameters may be specified when defining the route by separating the middleware name and parameters with a :
. Multiple parameters should be delimited by commas:
Route::put('/post/{id}', function (string $id) {
// ...
})->middleware('role:editor');
Sometimes a middleware may need to do some work after the HTTP response has been sent to the browser. If you define a terminate
method on your middleware and your web server is using FastCGI, the terminate
method will automatically be called after the response is sent to the browser:
<?php
namespace Illuminate\Session\Middleware;
use Closure;
use Illuminate\Http\Request;
use Symfony\Component\HttpFoundation\Response;
class TerminatingMiddleware
{
/**
* Handle an incoming request.
*
* @param \Closure(\Illuminate\Http\Request): (\Symfony\Component\HttpFoundation\Response) $next
*/
public function handle(Request $request, Closure $next): Response
{
return $next($request);
}
/**
* Handle tasks after the response has been sent to the browser.
*/
public function terminate(Request $request, Response $response): void
{
// ...
}
}
The terminate
method should receive both the request and the response. Once you have defined a terminable middleware, you should add it to the list of routes or global middleware in the app/Http/Kernel.php
file.
When calling the terminate
method on your middleware, Laravel will resolve a fresh instance of the middleware from the service container. If you would like to use the same middleware instance when the handle
and terminate
methods are called, register the middleware with the container using the container's singleton
method. Typically this should be done in the register
method of your AppServiceProvider
:
use App\Http\Middleware\TerminatingMiddleware;
/**
* Register any application services.
*/
public function register(): void
{
$this->app->singleton(TerminatingMiddleware::class);
}