Skip to content

Latest commit

 

History

History
81 lines (66 loc) · 3.33 KB

README.md

File metadata and controls

81 lines (66 loc) · 3.33 KB
Raw

Canetis Radar Improved

Sectional Highlighting and Configurability

This fork is for 7.1 Surround with side Speakers (Voicemeeter supported), It adds the following functionality:

  • Support for Side Speakers in 7.1
  • Sectioned Radar with Highlights
  • Highlightduration configurable
  • Section Amount configurable
  • Minimum Sound Detection Threshold configurable
  • Slight delay added to visualisation for better usability
  • Fullscreen Compatibility

CanetisRadar is open-source application for helping with recognizing sound direction in games. It has overlay that can be used in games and it uses 7.1 audio to calculate sound direction.

Voicemeter Banana Setup (Better)

You need 7.1 audio device to be connected and selected as primary speaker (including side speakers), but don´t worry. You can also use virtual audio device. First of all check if your sound card or headphones does not support it and if they don´t use this guide.

  1. Download Voicemeeter-Banana
  2. Install it
  3. Reboot PC
  4. Go to "Change System Sounds"
  5. Open Playback tab
  6. Set Voicemeeter Input as default
  7. Click on Configure
  8. Set sound to 7.1 surround and enable all speakers
  9. Open Voicemeeter Banana
  10. Set your Hardware Output A1 to the preferred Device (Speakers, Headset etc)
  11. In the Master Section for A1, click where it says "Normal Mode" and change it to "Mix down B" (Mix Down A doesnt work in some games)
  12. Check that Virtual Input "Voicemeeter VAIO" Plays to A1 (Button A1 highlighted Green)
  13. Set Voicemeeter Virtual Input as your Speaker everywhere
  14. Set Voicemeeter Banana to Autostart and Autorestart
  15. Profit
  16. If you dont want e.g. Discord Sound to appear on Sound Radar -> set output device in your Discord Settings as normal (not Virutal Input)

VB Cable Setup (alternative)

  1. Download VB-Cable
  2. Install it
  3. Reboot PC
  4. Go to sound settings
  5. Open Playback tab
  6. Set CABLE Input as default
  7. Click on Configure
  8. Set sound to 7.1 surround and enable all speakers
  9. Go to Recording tab
  10. Click on CABLE Output and click Properties
  11. Go to Listen tab
  12. Check Listen to this device
  13. Set your normal playback device
  14. Profit

Download

Build from Source or download Binary in Relases releases

Contributing

If you want to help, you can create pull-request.

You can also star this repo or fork this repo.

License

Copyright (c) 2018 Samuel Tulach

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <https://www.gnu.org/licenses/>.