Incorrect SOC and Charged Energy

[theveninjeremy]

I have EVCC installed through HomeAssistant since yesterday.
This morning my car ID4 was connected to my Easee charge station and the charging started to reach the target of 80%. But the dispayed value in EVCC are incorrect.

It shows 99% (which doesn't correspond to 312km indicated)
The extract of the log is also wrong:

While if I activate the beta features the vehicule section is correct :

The charging report from evcc is incorrect:

Created	Finished	Charging point	Identifier	Vehicle	Mileage (km)	Meter start (kWh)	Meter stop (kWh)	Energy (kWh)	Duration	Solar (%)	Price	Price/kWh	CO₂/kWh
18.11.2024 09:12	18.11.2024 09:43	Garage		ID.4	7161	1209.466	1209.895	17.493	18m3s	97.678	3.919	0.224
Meter Start and stop are correct for me but not the energy calculated.

The report from the charger (easee cloud) is also correct.
session-2024-11.csv

yaml for bug.txt

Is it a known issue?

[GrimmiMeloni]

These are two distinct problems.

1. Incorrect vehicle SOC. To analyze this, a debug log would be required.
2. Deviation in charged energy. This is a known issue with the Easee Wallboxes. See Easee: validate LIFETIME_ENERGY and SESSION_ENERGY #9940.