-
Notifications
You must be signed in to change notification settings - Fork 0
/
Thermisers.htm
1 lines (1 loc) · 3.44 KB
/
Thermisers.htm
1
<html><head/><body><p>* 1 : 100kΩ EPCOS - Best choice for EPCOS thermistors</p><p>* 331 : 100kΩ Same as #1, but 3.3V scaled for MEGA</p><p>* 332 : 100kΩ Same as #1, but 3.3V scaled for DUE</p><p>* 2 : 200kΩ ATC Semitec 204GT-2</p><p>* 202 : 200kΩ Copymaster 3D</p><p>* 3 : ???Ω Mendel-parts thermistor</p><p>* 4 : 10kΩ Generic Thermistor !! DO NOT use for a hotend - it gives bad resolution at high temp. !!</p><p>* 5 : 100kΩ ATC Semitec 104GT-2/104NT-4-R025H42G - Used in ParCan, J-Head, and E3D, SliceEngineering 300°C</p><p>* 501 : 100kΩ Zonestar - Tronxy X3A</p><p>* 502 : 100kΩ Zonestar - used by hot bed in Zonestar Průša P802M</p><p>* 503 : 100kΩ Zonestar (Z8XM2) Heated Bed thermistor</p><p>* 504 : 100kΩ Zonestar P802QR2 (Part# QWG-104F-B3950) Hotend Thermistor</p><p>* 505 : 100kΩ Zonestar P802QR2 (Part# QWG-104F-3950) Bed Thermistor</p><p>* 512 : 100kΩ RPW-Ultra hotend</p><p>* 6 : 100kΩ EPCOS - Not as accurate as table #1 (created using a fluke thermocouple)</p><p>* 7 : 100kΩ Honeywell 135-104LAG-J01</p><p>* 71 : 100kΩ Honeywell 135-104LAF-J01</p><p>* 8 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT</p><p>* 9 : 100kΩ GE Sensing AL03006-58.2K-97-G1</p><p>* 10 : 100kΩ RS PRO 198-961</p><p>* 11 : 100kΩ Keenovo AC silicone mats, most Wanhao i3 machines - beta 3950, 1%</p><p>* 12 : 100kΩ Vishay 0603 SMD NTCS0603E3104FXT (#8) - calibrated for Makibox hot bed</p><p>* 13 : 100kΩ Hisens up to 300°C - for "Simple ONE" & "All In ONE" hotend - beta 3950, 1%</p><p>* 15 : 100kΩ Calibrated for JGAurora A5 hotend</p><p>* 18 : 200kΩ ATC Semitec 204GT-2 Dagoma.Fr - MKS_Base_DKU001327</p><p>* 22 : 100kΩ GTM32 Pro vB - hotend - 4.7kΩ pullup to 3.3V and 220Ω to analog input</p><p>* 23 : 100kΩ GTM32 Pro vB - bed - 4.7kΩ pullup to 3.3v and 220Ω to analog input</p><p>* 30 : 100kΩ Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K </p><p>* 60 : 100kΩ Maker's Tool Works Kapton Bed Thermistor - beta 3950</p><p>* 61 : 100kΩ Formbot/Vivedino 350°C Thermistor - beta 3950</p><p>* 66 : 4.7MΩ Dyze Design / Trianglelab T-D500 500°C High Temperature Thermistor</p><p>* 67 : 500kΩ SliceEngineering 450°C Thermistor</p><p>* 68 : PT100 amplifier board from Dyze Design</p><p>* 70 : 100kΩ bq Hephestos 2</p><p>* 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32</p><p>* 2000 : 100kΩ Ultimachine Rambo TDK NTCG104LH104KT1 NTC100K motherboard Thermistor</p><p>* 51 : 100kΩ EPCOS (1kΩ pullup)</p><p>* 52 : 200kΩ ATC Semitec 204GT-2 (1kΩ pullup)</p><p>* 55 : 100kΩ ATC Semitec 104GT-2 - Used in ParCan & J-Head (1kΩ pullup)</p><p>* 99 : 100kΩ Found on some Wanhao i3 machines with a 10kΩ pull-up resistor</p><p>* 110 : Pt100 with 1kΩ pullup (atypical)</p><p>* 147 : Pt100 with 4.7kΩ pullup</p><p>* 1010 : Pt1000 with 1kΩ pullup (atypical)</p><p>* 1022 : Pt1000 with 2.2kΩ pullup</p><p>* 1047 : Pt1000 with 4.7kΩ pullup (E3D)</p><p>* 20 : Pt100 with circuit in the Ultimainboard V2.x with mainboard ADC reference voltage = INA826</p><p>* 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v ADC reference voltage (STM32, LPC176x....) </p><p>* 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x</p><p>* 0 : not used</p><p>* 1000 : Custom - Specify parameters in Configuration_adv.h</p><p>* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.</p><p>* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.</p></body></html>