Skip to content

Latest commit

 

History

History
66 lines (45 loc) · 1.71 KB

readme.md

File metadata and controls

66 lines (45 loc) · 1.71 KB
Raw

RFLink Gateway to MQTT

Purpose

Bridge between RFLink Gateway and MQTT broker.

Current features

Forwarding messages received on TTY port from RFLink Gateway Arduino board to MQTT broker in both directions.

Every message received from RFLinkGateway is split into single parameters and published to different MQTT topics. Example: Message: 20;83;Oregon Rain2;ID=2a19;RAIN=002a;RAINTOT=0054;BAT=OK;

is translated to following topics:

/data/RFLINK/Oregon Rain2/2a19/R/RAIN 002a

/data/RFLINK/Oregon Rain2/2a19/R/RAINTOT 0054

/data/RFLINK/Oregon Rain2/2a19/R/BAT OK

Every message received on particular MQTT topic is translated to RFLink Gateway and sent to 433 MHz.

Configuration

Whole configuration is located in config.json file.

{
  "mqtt_host": "your.mqtt.host",
  "mqtt_port": 1883,
  "mqtt_prefix": "/data/RFLINK",
  "rflink_tty_device": "/dev/ttyUSB0",
  "rflink_direct_output_params": ["BAT", "CMD", "SET_LEVEL", "SWITCH", "HUM", "CHIME", "PIR", "SMOKEALERT"]
}
config param meaning
mqtt_host MQTT broker host
mqtt_port MQTT broker port
mqtt_prefix prefix for publish and subscribe topic
rflink_tty_device Arduino tty device
rflink_ignored_devices Parameters transferred to MQTT without any processing

Output data

Application pushes informations to MQTT broker in following format: [mqtt_prefix]/[device_type]/[device_id]/R/[parameter]

/data/RFLINK/TriState/8556a8/W/1 OFF

Every change should be published to topic: [mqtt_prefix]/[device_type]/[device_id]/W/[switch_ID]

/data/RFLINK/TriState/8556a8/W/1 ON

References