-
Notifications
You must be signed in to change notification settings - Fork 0
/
fluidd.cfg
241 lines (228 loc) · 11.8 KB
/
fluidd.cfg
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
[virtual_sdcard]
path: ~/printer_data/gcodes
on_error_gcode: CANCEL_PRINT
[pause_resume]
[respond]
[display_status]
[gcode_macro CANCEL_PRINT]
description: Cancel the actual running print
rename_existing: CANCEL_PRINT_BASE
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
{% set allow_park = client.park_at_cancel | default(false) | lower == 'true' %}
{% set retract = client.cancel_retract | default(5.0) | abs %}
##### define park position #####
{% set park_x = "" if (client.park_at_cancel_x | default(none) is none)
else "X=" ~ client.park_at_cancel_x %}
{% set park_y = "" if (client.park_at_cancel_y | default(none) is none)
else "Y=" ~ client.park_at_cancel_y %}
{% set custom_park = park_x | length > 0 or park_y | length > 0 %}
##### end of definitions #####
# restore idle_timeout time if needed
{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
{% endif %}
{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
_CLIENT_RETRACT LENGTH={retract}
TURN_OFF_HEATERS
M106 S0
{client.user_cancel_macro | default("")}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
# clear pause_next_layer and pause_at_layer as preparation for next print
SET_PAUSE_NEXT_LAYER ENABLE=0
SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
CANCEL_PRINT_BASE
[gcode_macro PAUSE]
description: Pause the actual running print
rename_existing: PAUSE_BASE
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
{% set idle_timeout = client.idle_timeout | default(0) %}
{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
{% set restore = False if printer.toolhead.extruder == ''
else True if params.RESTORE | default(1) | int == 1 else False %}
##### end of definitions #####
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
# set a new idle_timeout value
{% if idle_timeout > 0 %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
{% endif %}
PAUSE_BASE
{client.user_pause_macro | default("")}
_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
variable_last_extruder_temp: {'restore': False, 'temp': 0}
variable_restore_idle_timeout: 0
variable_idle_state: False
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set sp_move = client.speed_move | default(velocity) %}
{% set runout_resume = True if client.runout_sensor | default("") == "" # no runout
else True if not printer[client.runout_sensor].enabled # sensor is disabled
else printer[client.runout_sensor].filament_detected %} # sensor status
{% set can_extrude = True if printer.toolhead.extruder == '' # no extruder defined in config
else printer[printer.toolhead.extruder].can_extrude %} # status of active extruder
{% set do_resume = False %}
{% set prompt_txt = [] %}
##### end of definitions #####
#### Printer comming from timeout idle state ####
{% if printer.idle_timeout.state | upper == "IDLE" or idle_state %}
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
{% if last_extruder_temp.restore %}
# we need to use the unicode (\u00B0) for the ° as py2 env's would throw an error otherwise
RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
M109 S{last_extruder_temp.temp}
{% set do_resume = True %}
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
#### Printer comming out of regular PAUSE state ####
{% elif can_extrude %}
{% set do_resume = True %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
{% endif %}
{% if runout_resume %}
{% if do_resume %}
{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} # restore idle_timeout time
{client.user_resume_macro | default("")}
_CLIENT_EXTRUDE
RESUME_BASE VELOCITY={params.VELOCITY | default(sp_move)}
{% endif %}
{% else %}
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
{% endif %}
##### Generate User Information box in case of abort #####
{% if not (runout_resume and do_resume) %}
RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
{% for element in prompt_txt %}
RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
{% endfor %}
RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
RESPOND TYPE=command MSG="action:prompt_show"
{% endif %}
Usage: SET_PAUSE_NEXT_LAYER [ENABLE=[0 | 1]] [MACRO=<name>]
[gcode_macro SET_PAUSE_NEXT_LAYER]
description: Enable a pause if the next layer is reached
gcode:
{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
{% set ENABLE = params.ENABLE | default(1)|int != 0 %}
{% set MACRO = params.MACRO | default(pause_next_layer.call, True) %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"
# Usage: SET_PAUSE_AT_LAYER [ENABLE=[0 | 1]] [LAYER=<number>] [MACRO=<name>]
[gcode_macro SET_PAUSE_AT_LAYER]
description: Enable/disable a pause if a given layer number is reached
gcode:
{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
{% set ENABLE = params.ENABLE | int != 0 if params.ENABLE is defined
else params.LAYER is defined %}
{% set LAYER = params.LAYER | default(pause_at_layer.layer) | int %}
{% set MACRO = params.MACRO | default(pause_at_layer.call, True) %}
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"
# Usage: SET_PRINT_STATS_INFO [TOTAL_LAYER=<total_layer_count>] [CURRENT_LAYER= <current_layer>]
[gcode_macro SET_PRINT_STATS_INFO]
rename_existing: SET_PRINT_STATS_INFO_BASE
description: Overwrite, to get pause_next_layer and pause_at_layer feature
variable_pause_next_layer: { 'enable': False, 'call': "PAUSE" }
variable_pause_at_layer : { 'enable': False, 'layer': 0, 'call': "PAUSE" }
gcode:
{% if pause_next_layer.enable %}
RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
{pause_next_layer.call} ; execute the given gcode to pause, should be either M600 or PAUSE
SET_PAUSE_NEXT_LAYER ENABLE=0
{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER | int == pause_at_layer.layer %}
RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
{pause_at_layer.call} ; execute the given gcode to pause, should be either M600 or PAUSE
SET_PAUSE_AT_LAYER ENABLE=0
{% endif %}
SET_PRINT_STATS_INFO_BASE {rawparams}
##### internal use #####
[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
description: Helper: park toolhead used in PAUSE and CANCEL_PRINT
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
{% set use_custom = client.use_custom_pos | default(false) | lower == 'true' %}
{% set custom_park_x = client.custom_park_x | default(0.0) %}
{% set custom_park_y = client.custom_park_y | default(0.0) %}
{% set park_dz = client.custom_park_dz | default(2.0) | abs %}
{% set sp_hop = client.speed_hop | default(15) * 60 %}
{% set sp_move = client.speed_move | default(velocity) * 60 %}
##### get config and toolhead values #####
{% set origin = printer.gcode_move.homing_origin %}
{% set act = printer.gcode_move.gcode_position %}
{% set max = printer.toolhead.axis_maximum %}
{% set cone = printer.toolhead.cone_start_z | default(max.z) %} ; height as long the toolhead can reach max and min of an delta
{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
else False %}
##### define park position #####
{% set z_min = params.Z_MIN | default(0) | float %}
{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)] | min %}
{% set x_park = params.X if params.X is defined
else custom_park_x if use_custom
else 0.0 if round_bed
else (max.x - 5.0) %}
{% set y_park = params.Y if params.Y is defined
else custom_park_y if use_custom
else (max.y - 5.0) if round_bed and z_park < cone
else 0.0 if round_bed
else (max.y - 5.0) %}
##### end of definitions #####
_CLIENT_RETRACT
{% if "xyz" in printer.toolhead.homed_axes %}
G90
G1 Z{z_park} F{sp_hop}
G1 X{x_park} Y{y_park} F{sp_move}
{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
{% else %}
RESPOND TYPE=echo MSG='Printer not homed'
{% endif %}
[gcode_macro _CLIENT_EXTRUDE]
description: Extrudes, if the extruder is hot enough
gcode:
##### get user parameters or use default #####
{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
{% set use_fw_retract = (client.use_fw_retract | default(false) | lower == 'true') and (printer.firmware_retraction is defined) %}
{% set length = params.LENGTH | default(client.unretract) | default(1.0) | float %}
{% set speed = params.SPEED | default(client.speed_unretract) | default(35) %}
{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
##### end of definitions #####
{% if printer.toolhead.extruder != '' %}
{% if printer[printer.toolhead.extruder].can_extrude %}
{% if use_fw_retract %}
{% if length < 0 %}
G10
{% else %}
G11
{% endif %}
{% else %}
M83
G1 E{length} F{(speed | float | abs) * 60}
{% if absolute_extrude %}
M82
{% endif %}
{% endif %}
{% else %}
RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
{% endif %}
{% endif %}
[gcode_macro _CLIENT_RETRACT]
description: Retracts, if the extruder is hot enough
gcode:
{% set client = printer['gcode_macro _CLIENT_VARIABLE'] | default({}) %}
{% set length = params.LENGTH | default(client.retract) | default(1.0) | float %}
{% set speed = params.SPEED | default(client.speed_retract) | default(35) %}
_CLIENT_EXTRUDE LENGTH=-{length | float | abs} SPEED={speed | float | abs}