Calibration Error in CWatM

[Matin64112]

Servus, Guten Tag

My name is Matin and I am PhD student at the University of Oulu.
I am trynig to calibrate a 5-arcminute resolution CWatM model on a monthly time scale. My "settings_calibration.txt": is as follows:

ForcingStart = 1/1/1932
ForcingEnd = 1/12/2007
timeperiod = daily
bestrun = True

and "settings_CWatM_template.ini :"

StepStart = 1/1/1926
SpinUp = 1/1/1932
StepEnd = 1/12/2007

OUT_Dir = %run_rand_id
OUT_TSS_Daily = discharge
OUT_TSS_MonthAvg = discharge

When running the calibration process, I encountered the following error:

and the log file says:

I have also attached my settings files, and I changed the format of the .ini file to upload it.
I was wondering if "settings_CWatM_template.ini" is appropriate only for 30 arcmin, not 5 arcmin resolution? When I compare the settings file for 30 arcminutes, I find that the above-mentioned file is available.

I would greatly appreciate any guidance or examples related to resolving this error.
Thank you!

settings_calibration.txt
settings_CWatM_template.txt

[mikhailsmilovic]

Guten Tag Matin64112,

The settings file setups for 5 minutes and 30 minutes are slightly different. You are using the 30 min version.
There should be a template settings file in the folder with the 5 min input data.
Let me know, and we go from there!