apdu_responses.csv

6; ;E;Class not supported.
61;--;I;Response bytes still available
61;XX;I;Command successfully executed; 'XX' bytes of data are available and can be requested using GET RESPONSE.
62;--;W;State of non-volatile memory unchanged
62;00;W;No information given (NV-Ram not changed)
62;01;W;NV-Ram not changed 1.
62;81;W;Part of returned data may be corrupted
62;82;W;End of file/record reached before reading Le bytes
62;83;W;Selected file invalidated
62;84;W;Selected file is not valid. FCI not formated according to ISO
62;85;W;No input data available from a sensor on the card. No Purse Engine enslaved for R3bc
62;A2;W;Wrong R-MAC
62;A4;W;Card locked (during reset( ))
62;CX;W;Counter with value x (command dependent)
62;F1;W;Wrong C-MAC
62;F3;W;Internal reset
62;F5;W;Default agent locked
62;F7;W;Cardholder locked
62;F8;W;Basement is current agent
62;F9;W;CALC Key Set not unblocked
62;FX;W;-
62;XX;W;RFU
63;--;W;State of non-volatile memory changed
63;00;W;No information given (NV-Ram changed)
63;81;W;File filled up by the last write. Loading/updating is not allowed.
63;82;W;Card key not supported.
63;83;W;Reader key not supported.
63;84;W;Plaintext transmission not supported.
63;85;W;Secured transmission not supported.
63;86;W;Volatile memory is not available.
63;87;W;Non-volatile memory is not available.
63;88;W;Key number not valid.
63;89;W;Key length is not correct.
63;C0;W;Verify fail, no try left.
63;C1;W;Verify fail, 1 try left.
63;C2;W;Verify fail, 2 tries left.
63;C3;W;Verify fail, 3 tries left.
63;CX;W;The counter has reached the value 'x' (0 = x = 15) (command dependent).
63;F1;W;More data expected.
63;F2;W;More data expected and proactive command pending.
63;FX;W;-
63;XX;W;RFU
64;--;E;State of non-volatile memory unchanged
64;00;E;No information given (NV-Ram not changed)
64;01;E;Command timeout. Immediate response required by the card.
64;XX;E;RFU
65;--;E;State of non-volatile memory changed
65;00;E;No information given
65;01;E;Write error. Memory failure. There have been problems in writing or reading the EEPROM. Other hardware problems may also bring this error.
65;81;E;Memory failure
65;FX;E;-
65;XX;E;RFU
66;--;S; 
66;00;S;Error while receiving (timeout)
66;01;S;Error while receiving (character parity error)
66;02;S;Wrong checksum
66;03;S;The current DF file without FCI
66;04;S;No SF or KF under the current DF
66;69;S;Incorrect Encryption/Decryption Padding
66;XX;S;-
67;--;E; 
67;00;E;Wrong length
67;XX;E;length incorrect (procedure)(ISO 7816-3)
68;--;E;Functions in CLA not supported
68;00;E;No information given (The request function is not supported by the card)
68;81;E;Logical channel not supported
68;82;E;Secure messaging not supported
68;83;E;Last command of the chain expected
68;84;E;Command chaining not supported
68;FX;E;-
68;XX;E;RFU
69;--;E;Command not allowed
69;00;E;No information given (Command not allowed)
69;01;E;Command not accepted (inactive state)
69;81;E;Command incompatible with file structure
69;82;E;Security condition not satisfied.
69;83;E;Authentication method blocked
69;84;E;Referenced data reversibly blocked (invalidated)
69;85;E;Conditions of use not satisfied.
69;86;E;Command not allowed (no current EF)
69;87;E;Expected secure messaging (SM) object missing
69;88;E;Incorrect secure messaging (SM) data object
69;8D; ;Reserved
69;96;E;Data must be updated again
69;E1;E;POL1 of the currently Enabled Profile prevents this action.
69;F0;E;Permission Denied
69;F1;E;Permission Denied - Missing Privilege
69;FX;E;-
69;XX;E;RFU
6A;--;E;Wrong parameter(s) P1-P2
6A;00;E;No information given (Bytes P1 and/or P2 are incorrect)
6A;80;E;The parameters in the data field are incorrect.
6A;81;E;Function not supported
6A;82;E;File not found
6A;83;E;Record not found
6A;84;E;There is insufficient memory space in record or file
6A;85;E;Lc inconsistent with TLV structure
6A;86;E;Incorrect P1 or P2 parameter.
6A;87;E;Lc inconsistent with P1-P2
6A;88;E;Referenced data not found
6A;89;E;File already exists
6A;8A;E;DF name already exists.
6A;F0;E;Wrong parameter value
6A;FX;E;-
6A;XX;E;RFU
6B;--;E; 
6B;00;E;Wrong parameter(s) P1-P2
6B;XX;E;Reference incorrect (procedure byte), (ISO 7816-3)
6C;--;E;Wrong length Le
6C;00;E;Incorrect P3 length.
6C;XX;E;Bad length value in Le; 'xx' is the correct exact Le
6D;--;E; 
6D;00;E;Instruction code not supported or invalid
6D;XX;E;Instruction code not programmed or invalid (procedure byte), (ISO 7816-3)
6E;--;E; 
6E;00;E;Class not supported
6E;XX;E;Instruction class not supported (procedure byte), (ISO 7816-3)
6F;--;E;Internal exception
6F;00;E;Command aborted - more exact diagnosis not possible (e.g., operating system error).
6F;FF;E;Card dead (overuse, …)
6F;XX;E;No precise diagnosis (procedure byte), (ISO 7816-3)
9-;--; ; 
90;00;I;Command successfully executed (OK).
90;04;W;PIN not succesfully verified, 3 or more PIN tries left
90;08; ;Key/file not found
90;80;W;Unblock Try Counter has reached zero
91;00; ;OK
91;01; ;States.activity, States.lock Status or States.lockable has wrong value
91;02; ;Transaction number reached its limit
91;0C; ;No changes
91;0E; ;Insufficient NV-Memory to complete command
91;1C; ;Command code not supported
91;1E; ;CRC or MAC does not match data
91;40; ;Invalid key number specified
91;7E; ;Length of command string invalid
91;9D; ;Not allow the requested command
91;9E; ;Value of the parameter invalid
91;A0; ;Requested AID not present on PICC
91;A1; ;Unrecoverable error within application
91;AE; ;Authentication status does not allow the requested command
91;AF; ;Additional data frame is expected to be sent
91;BE; ;Out of boundary
91;C1; ;Unrecoverable error within PICC
91;CA; ;Previous Command was not fully completed
91;CD; ;PICC was disabled by an unrecoverable error
91;CE; ;Number of Applications limited to 28
91;DE; ;File or application already exists
91;EE; ;Could not complete NV-write operation due to loss of power
91;F0; ;Specified file number does not exist
91;F1; ;Unrecoverable error within file
92;0x;I;Writing to EEPROM successful after 'x' attempts.
92;10;E;Insufficient memory. No more storage available.
92;40;E;Writing to EEPROM not successful.
93;01; ;Integrity error
93;02; ;Candidate S2 invalid
93;03;E;Application is permanently locked
94;00;E;No EF selected.
94;01; ;Candidate currency code does not match purse currency
94;02; ;Candidate amount too high
94;02;E;Address range exceeded.
94;03; ;Candidate amount too low
94;04;E;FID not found, record not found or comparison pattern not found.
94;05; ;Problems in the data field
94;06;E;Required MAC unavailable
94;07; ;Bad currency : purse engine has no slot with R3bc currency
94;08; ;R3bc currency not supported in purse engine
94;08;E;Selected file type does not match command.
95;80; ;Bad sequence
96;81; ;Slave not found
97;00; ;PIN blocked and Unblock Try Counter is 1 or 2
97;02; ;Main keys are blocked
97;04; ;PIN not succesfully verified, 3 or more PIN tries left
97;84; ;Base key
97;85; ;Limit exceeded - C-MAC key
97;86; ;SM error - Limit exceeded - R-MAC key
97;87; ;Limit exceeded - sequence counter
97;88; ;Limit exceeded - R-MAC length
97;89; ;Service not available
98;02;E;No PIN defined.
98;04;E;Access conditions not satisfied, authentication failed.
98;35;E;ASK RANDOM or GIVE RANDOM not executed.
98;40;E;PIN verification not successful.
98;50;E;INCREASE or DECREASE could not be executed because a limit has been reached.
98;62;E;Authentication Error, application specific (incorrect MAC)
99;00; ;1 PIN try left
99;04; ;PIN not succesfully verified, 1 PIN try left
99;85; ;Wrong status - Cardholder lock
99;86;E;Missing privilege
99;87; ;PIN is not installed
99;88; ;Wrong status - R-MAC state
9A;00; ;2 PIN try left
9A;04; ;PIN not succesfully verified, 2 PIN try left
9A;71; ;Wrong parameter value - Double agent AID
9A;72; ;Wrong parameter value - Double agent Type
9D;05;E;Incorrect certificate type
9D;07;E;Incorrect session data size
9D;08;E;Incorrect DIR file record size
9D;09;E;Incorrect FCI record size
9D;0A;E;Incorrect code size
9D;10;E;Insufficient memory to load application
9D;11;E;Invalid AID
9D;12;E;Duplicate AID
9D;13;E;Application previously loaded
9D;14;E;Application history list full
9D;15;E;Application not open
9D;17;E;Invalid offset
9D;18;E;Application already loaded
9D;19;E;Invalid certificate
9D;1A;E;Invalid signature
9D;1B;E;Invalid KTU
9D;1D;E;MSM controls not set
9D;1E;E;Application signature does not exist
9D;1F;E;KTU does not exist
9D;20;E;Application not loaded
9D;21;E;Invalid Open command data length
9D;30;E;Check data parameter is incorrect (invalid start address)
9D;31;E;Check data parameter is incorrect (invalid length)
9D;32;E;Check data parameter is incorrect (illegal memory check area)
9D;40;E;Invalid MSM Controls ciphertext
9D;41;E;MSM controls already set
9D;42;E;Set MSM Controls data length less than 2 bytes
9D;43;E;Invalid MSM Controls data length
9D;44;E;Excess MSM Controls ciphertext
9D;45;E;Verification of MSM Controls data failed
9D;50;E;Invalid MCD Issuer production ID
9D;51;E;Invalid MCD Issuer ID
9D;52;E;Invalid set MSM controls data date
9D;53;E;Invalid MCD number
9D;54;E;Reserved field error
9D;55;E;Reserved field error
9D;56;E;Reserved field error
9D;57;E;Reserved field error
9D;60;E;MAC verification failed
9D;61;E;Maximum number of unblocks reached
9D;62;E;Card was not blocked
9D;63;E;Crypto functions not available
9D;64;E;No application loaded
9E;00; ;PIN not installed
9E;04; ;PIN not succesfully verified, PIN not installed
9F;00; ;PIN blocked and Unblock Try Counter is 3
9F;04; ;PIN not succesfully verified, PIN blocked and Unblock Try Counter is 3
9F;XX; ;Command successfully executed; 'xx' bytes of data are available and can be requested using GET RESPONSE.
9x;XX; ;Application related status, (ISO 7816-3)