You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I enabled the plugin on homebridge and filled in all necessary fields (MQ. After this, I added the homebridge hub to my "Home" on my phone. The hub is recognized and an air quality sensor and fan is added.
After this the fan is running at 47% according to "Home". In the Add on web interface it is set to value "120".
When I wan't to change value/speed of the fan, nothing happens, although Homebridge does show the value change.
The fan stays on the same speed, the Add on webinterface doesn't show the speed change either.
Note: I did not connect my RFT-N AUTO remote to the add-on.
Logs:
21/11/2023, 12:42:48] [HB Supervisor] Restarting Homebridge...
[21/11/2023, 12:42:48] [HB Supervisor] Starting Homebridge with extra flags: -I -P /var/lib/homebridge/node_modules --strict-plugin-resolution
[21/11/2023, 12:42:48] [HB Supervisor] Started Homebridge v1.7.0 with PID: 18121
[21/11/2023, 12:42:54] Loaded config.json with 0 accessories and 2 platforms.
[21/11/2023, 12:42:54] Loaded 2 cached accessories from cachedAccessories.
[21/11/2023, 12:42:55] ---
[21/11/2023, 12:43:16] Disabled plugin: [email protected]
[21/11/2023, 12:43:16] ---
[21/11/2023, 12:43:19] Disabled plugin: [email protected]
[21/11/2023, 12:43:19] ---
[21/11/2023, 12:43:20] Loaded plugin: [email protected]
[21/11/2023, 12:43:20] Registering platform 'homebridge-itho-daalderop.HomebridgeIthoDaalderop'
[21/11/2023, 12:43:20] ---
[21/11/2023, 12:43:34] Disabled plugin: [email protected]
[21/11/2023, 12:43:34] ---
[21/11/2023, 12:43:34] Loading 2 platforms...
[21/11/2023, 12:43:34] [Itho Daalderop] Initializing HomebridgeIthoDaalderop platform...
[21/11/2023, 12:43:34] [Itho Daalderop] [Platform Setup] -> Restoring existing fan accessory from cache: Mechanical Ventilation
[21/11/2023, 12:43:35] [Itho Daalderop] [Platform Setup] -> Restoring existing air quality sensor accessory from cache: Air Quality Sensor
Setup Payload:
X-HM://0023W30xxxxxx
Enter this code with your HomeKit app on your iOS device to pair with Homebridge:
┌────────────┐
│ 254-49-xxx │
└────────────┘
[21/11/2023, 12:43:35] Homebridge v1.7.0 (HAP v0.11.1) (Homebridge MeterkastPi) is running on port xxxxx.
[21/11/2023, 12:43:40] [Itho Daalderop] [Mechanical Ventilation] -> Active is ACTIVE (1)
[21/11/2023, 12:43:40] [Itho Daalderop] [Mechanical Ventilation] -> RotationSpeed is 47/100
[21/11/2023, 12:43:40] [Itho Daalderop] [Air Quality Sensor] -> AirQuality is UNKNOWN (0)
[21/11/2023, 12:43:40] [Itho Daalderop] [Air Quality Sensor] -> StatusActive is ACTIVE (true)
[21/11/2023, 12:43:47] [Itho Daalderop] [Mechanical Ventilation] -> Active is ACTIVE (1)
[21/11/2023, 12:43:47] [Itho Daalderop] [Mechanical Ventilation] -> RotationSpeed is 47/100
[21/11/2023, 12:43:47] [Itho Daalderop] [Air Quality Sensor] -> AirQuality is UNKNOWN (0)
[21/11/2023, 12:43:49] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 50/100
[21/11/2023, 12:43:49] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 76/100
[21/11/2023, 12:43:50] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 84/100
[21/11/2023, 12:43:52] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 86/100
[21/11/2023, 12:43:52] [Itho Daalderop] [Mechanical Ventilation] -> Active is ACTIVE (1)
[21/11/2023, 12:43:52] [Itho Daalderop] [Air Quality Sensor] -> AirQuality is UNKNOWN (0)
[21/11/2023, 12:43:52] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 100/100
[21/11/2023, 12:43:54] [Itho Daalderop] [Mechanical Ventilation] -> Active is ACTIVE (1)
[21/11/2023, 12:43:54] [Itho Daalderop] [Air Quality Sensor] -> AirQuality is UNKNOWN (0)
[21/11/2023, 12:43:56] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 96/100
[21/11/2023, 12:43:56] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 50/100
[21/11/2023, 12:43:57] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 17/100
[21/11/2023, 12:43:57] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 16/100
[21/11/2023, 12:44:18] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 14/100
[21/11/2023, 12:44:18] [Itho Daalderop] [Mechanical Ventilation] -> Setting RotationSpeed to 100/100
[21/11/2023, 12:44:29] [Itho Daalderop] [Mechanical Ventilation] -> Active is ACTIVE (1)
[21/11/2023, 12:44:29] [Itho Daalderop] [Air Quality Sensor] -> AirQuality is UNKNOWN (0)
[21/11/2023, 12:44:32] [Itho Daalderop] [Air Quality Sensor] -> AirQuality is UNKNOWN (0)
I enabled the plugin on homebridge and filled in all necessary fields (MQ. After this, I added the homebridge hub to my "Home" on my phone. The hub is recognized and an air quality sensor and fan is added.
After this the fan is running at 47% according to "Home". In the Add on web interface it is set to value "120".
When I wan't to change value/speed of the fan, nothing happens, although Homebridge does show the value change.
The fan stays on the same speed, the Add on webinterface doesn't show the speed change either.
Note: I did not connect my RFT-N AUTO remote to the add-on.
Logs:
Plugin Config:
Environment:
The text was updated successfully, but these errors were encountered: