Skip to content

Latest commit

 

History

History
204 lines (154 loc) · 8.38 KB

manual_release.md

File metadata and controls

204 lines (154 loc) · 8.38 KB
Raw

Creating a new Knative release locally

Note: This should not be used for official releases.

This is intended for debugging and testing purposes.

The release.sh script

The release.sh script in the hack directory automates the creation of Knative releases, either nightly or versioned ones.

By default, the script creates a nightly release but does not publish it anywhere.

Common flags for cutting releases

The following flags affect the behavior of the script, no matter the type of the release.

  • --skip-tests Do not run tests before building the release. Otherwise, build, unit and end-to-end tests are run and they all must pass for the release to be built.
  • --tag-release, --notag-release Tag (or not) the generated images with either vYYYYMMDD-<commit_short_hash> (for nightly releases) or vX.Y.Z for versioned releases. For versioned releases, a tag is always added (i.e., these flags are ignored).
  • --release-gcs Defines the GCS bucket where the manifests will be stored. By default, this is knative-nightly/MODULE (MODULE is a Knative module name, e.g. serving or eventing). This flag is ignored if the release is not being published.
  • --release-gcr Defines the GCR where the images will be stored. By default, this is gcr.io/knative-nightly. This flag is ignored if the release is not being published.
  • --release-dir Defines the directory where the manifests will be stored. It is mutually exclusive to release-gcs. If --nopublish is used, and --release-dir is not passed, the directory defaults to the repository root.
  • --publish, --nopublish Whether the generated images should be published to a GCR, and the generated manifests written to a GCS bucket or not. If yes, the --release-gcs and --release-gcr flags can be used to change the default values of the GCR/GCS used. If no, the images will be pushed to the ko.local registry, and the manifests written to the local disk only (in the repository root directory).

Creating nightly releases

Nightly releases are built against the current git tree. The behavior of the script is defined by the common flags. You must have write access to the GCR and GCS bucket the release will be pushed to, unless --nopublish is used.

Examples:

# Create and publish a nightly, tagged release.
./hack/release.sh --publish --tag-release

# Create release, but don't test, publish or tag it.
./hack/release.sh --skip-tests --nopublish --notag-release

Creating versioned releases

To specify a versioned release to be cut, you must use the --version flag. Versioned releases are usually built against a branch in the Knative repository, specified by the --branch flag.

  • --version Defines the version of the release, and must be in the form X.Y.Z, where X, Y and Z are numbers.
  • --branch Defines the branch in Knative repository from which the release will be built. If not passed, the main branch at HEAD will be used. This branch must be created before the script is executed, and must be in the form release-X.Y, where X and Y must match the numbers used in the version passed in the --version flag. This flag has no effect unless --version is also passed.
  • --release-notes Points to a markdown file containing a description of the release. This is optional but highly recommended. It has no effect unless --version is also passed.
  • --github-token Points to a text file containing the GitHub token to be used for authentication when publishing the release to GitHub. If this flag is not used and this is the first time you're publishing a versioned release, you'll be prompted for your GitHub username, password, and possibly 2-factor authentication challenge (you must be a Knative admin to have the required publishing permissions).

The release will be published in the Releases page of the Knative repository, with the title Knative MODULE release vX.Y.Z and the given release notes. It will also be tagged vX.Y.Z (both on GitHub and as a git annotated tag).

Example:

# Create and publish a versioned release of Knative Serving.
./hack/release.sh --publish --tag-release \
  --release-gcr gcr.io/knative-releases \
  --release-gcs knative-releases/serving \
  --version 0.3.0 \
  --branch release-0.3 \
  --release-notes $HOME/docs/release-notes-0.3.md

Creating incremental build releases ("dot releases")

An incremental build release (aka "dot release") is a versioned release built automatically based on changes in the latest release branch, with the build number increased.

For example, if the latest release on release branch release-0.2 is v0.2.1, creating an incremental build release will result in v0.2.2.

To specify an incremental build release to be cut, you must use the --dot-release flag. The latest branch and release version will be automatically detected and used.

Note 1: when using the --dot-release flag, the flags --nopublish and --notag-release have no effect. The release is always tagged and published.

Note 2: if the release branch has no new commits since its last release was cut, the script successfully exits with a warning, and no release will be created.

The following flags are useful when creating incremental build releases:

  • --branch Restricts the incremental build release to the given branch. If not passed, the latest branch will be automatically detected and used.
  • --release-notes Points to a markdown file containing a description of the release. If not passed, the notes will be copied from the previous release.
  • --github-token Points to a text file containing the GitHub token to be used for authentication when publishing the release to GitHub. If this flag is not used and this is the first time you're publishing a versioned release, you'll be prompted for your GitHub username, password, and possibly 2-factor authentication challenge (you must be a Knative admin to have the required publishing permissions).

Like any regular versioned release, an incremental build release is published in the Releases page of the Knative repository.

Example:

# Create and publish a new dot release for Knative Serving.
./hack/release.sh \
  --dot-release \
  --release-gcr gcr.io/knative-releases \
  --release-gcs knative-releases/serving

Creating a new Knative release using Prow

Creating a "dot" release on demand

Option #1: Via Prow UI

Note: Has to be a member of one of the groups under deck: -> rerun_auth_configs: block in config.yaml

  1. Open a browser, navigate to https://prow.knative.dev/?job=release_MODULE_release-[RELEASE_BRANCH_VERSION]_periodic, replace MODULE with the right Knative module name (e.g., serving or eventing), and replace [RELEASE_BRANCH_VERSION-] with the release branch number (e.g. 1.4)

  2. Pick the first line, click on the refresh button, then click RERUN button

Rerun Button

Option #2: ask one of Prow admin

  1. Use the run_job.sh script to start the dot release job for the module you want, like in the example below. Replace MODULE with the right Knative module name (e.g., serving or eventing), and replace [RELEASE_BRANCH_VERSION-] with the release branch number (e.g., 1.4)

    # run gcloud auth login first and pull the latest commit in main branch
cd prow/jobs
./run_job.sh release_MODULE_release-[RELEASE_BRANCH_VERSION]_periodic

  2. Monitor the new job through Prow UI.

Creating a nightly release on demand

Option #1: Via Prow UI

Note: Has to be a member of Knative Milestone Maintainer

  1. Open a browser, navigate to https://prow.knative.dev/?job=ci-knative-MODULE-nightly-release (Replace Module with the name of the repo)

  2. Pick the first line, click on the refresh button, then click RERUN button

Option #2: ask one of Prow admin

  1. Use the run_job.sh script to start the nightly release job for the module you want, like in the example below. Replace MODULE with the right Knative module name (e.g., serving or eventing).

    # run gcloud auth login first and pull the latest commit in main branch
cd config/prow
./run_job.sh ci-knative-MODULE-nightly-release

  2. Monitor the new job through Prow UI.