Releases: lupyuen/nuttx-sg2000
Releases · lupyuen/nuttx-sg2000
nuttx-sg2000-2024-06-24
Script started on Mon Jun 24 09:43:28 2024
Command: ./test.sh
+ '[' '' == '' ']'
+ export BUILD_PREFIX=nuttx-sg2000
+ BUILD_PREFIX=nuttx-sg2000
+ '[' '' == '' ']'
++ date +%Y-%m-%d
+ export BUILD_DATE=2024-06-24
+ BUILD_DATE=2024-06-24
+ '[' '' == '' ']'
+ export USB_DEVICE=/dev/tty.usbserial-0001
+ USB_DEVICE=/dev/tty.usbserial-0001
+ set +x
----- Download the latest NuttX build for 2024-06-24
+ wget -q https://github.com/lupyuen/nuttx-sg2000/releases/download/nuttx-sg2000-2024-06-24/nuttx.zip -O /tmp/nuttx.zip
+ pushd /tmp
/tmp ~/sg2000/autotest-nuttx-sg2000/scripts
+ unzip -o nuttx.zip
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.5.1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
+ popd
~/sg2000/autotest-nuttx-sg2000/scripts
+ set +x
NuttX Source: https://github.com/apache/nuttx/tree/9790248f9a78c518d53fe3e60953d652f9eebbce
NuttX Apps: https://github.com/apache/nuttx-apps/tree/cda5140c4d1ffa95764df7cb47bbc34b5663adff
----- Copy NuttX Image to TFTP Server
+ scp /tmp/Image tftpserver:/tftpboot/Image-sg2000
Image 0% 0 0.0KB/s --:-- ETAImage 100% 15MB 36.0MB/s 00:00
+ ssh tftpserver ls -l /tftpboot/Image-sg2000
-rw-r--r-- 1 pi pi 15686232 Jun 24 02:43 /tftpboot/Image-sg2000
+ rm /tmp/Image
+ set +x
+ set +x
----- Power Off the SBC
[]+ set +x
----- Power On the SBC
[]+ /Users/luppy/sg2000/autotest-nuttx-sg2000/scripts/nuttx.exp
spawn screen /dev/tty.usbserial-0001 115200
0080401260 0000000000000000
stacBS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:54
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - 82:8d:5f:73:d0:6a
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.177 (542 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.177
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#############################
1.2 MiB/s
done
Bytes transferred = 15686232 (ef5a58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.177
Filename 'jh7110-star64-pine64.dtb'.
Load address: 0x81200000
Loading: * ####
1.2 MiB/s
done
Bytes transferred = 50235 (c43b hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f26e000, end 000000009f27d43a ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.5.1
nsh> uname -a
NuttX 12.5.1 9790248f9a Jun 24 2024 00:14:14 risc-v milkv_duos
nsh> free
riscv_exception: EXCEPTION: Load page fault. MCAUSE: 000000000000000d, EPC: 00000000802188de, MTVAL: 0000000000000010
riscv_exception: Segmentation fault in PID 3: /system/bin/init
_assert: Current Version: NuttX 12.5.1 9790248f9a Jun 24 2024 00:14:57 risc-v
_assert: Assertion failed !nxmutex_is_hold(mutex): at file: misc/lib_mutex.c:199 task: /system/bin/init process: Kernel 0xc000001a
up_dump_register: EPC: 00000000802144a2
up_dump_register: A0: 00000000804026c0 A1: 00000000000000c7 A2: 000000008021aaf0 A3: 0000000000000000
up_dump_register: A4: 0000000000000003 A5: 0000000000000000 A6: 0000000080409e6c A7: 00000000802251f0
up_dump_register: T0: 0000000080206cd6 T1: 00000000c0000e56 T2: 0000000000000000 T3: 0000000000000001
up_dump_register: T4: 00000000c000c578 T5: 00000000c0202968 T6: 0000000000000000
up_dump_register: S0: 0000000000000000 S1: 000000008040a810 S2: 0000000000000000 S3: 0000000000000000
up_dump_register: S4: 000000008021aaf0 S5: 000000008021ab08 S6: 8000000201842022 S7: 00000000804028d8
up_dump_register: S8: 00000000000000c7 S9: 00000000c000b048 S10: 00000000c000aff0 S11: 0000000000000000
up_dump_register: SP: 000000008040b450 FP: 0000000000000000 TP: 000000008040a810 RA: 00000000802144a2
dump_stack: Kernel Stack:
dump_stack: base: 0x8040ab20
dump_stack: size: 00003072
dump_stack: sp: 0x8040b450
stack_dump: 0x8040b410: 0000000000000009 0000000080225c78 0000000080229c70 0000000000000000 0000000000000000 000000008040a810 0000000000000000 0000000080214660
stack_dump: 0x8040b450: 00000000c000001a 0000000000000001 0000000080409a60 0000000080409e60 000000008040a810 00000000804026c0 000000008021aaf0 000000008021ab08
stack_dump: 0x8040b490: 00000000000000c7 000000587474754e 00000000c02008c0 000000008020d8f2 00000000c02008c0 000000008020d91c ffffffffffffffff 2e32310000000200
stack_dump: 0x8040b4d0: 0000000000312e35 000000008040aa90 343230393739ffda 6e754a2061396638 3432303220343220 353a34313a303020 8000000201840037 00000000802002a0
stack_dump: 0x8040b510: 7369720080202592 0000000000762d63 000000008040b720 000000008040a810 00000000c000aff0 00000000c000b048 00000000c000c508 0000000000000004
stack_dump: 0x8040b550: 0000000080225248 ffffffffffffffe8 ffffffffffffffff 0000000000000030 0000000000000000 0000000080408c00 0000000080409e60 0000000080207030
stack_dump: 0x8040b590: 0000000080409e60 00000000802071c6 000000008040b3e0 0000000000000030 0000000000000000 0000000080408c00 0000000080409e60 000000008020910c
stack_dump: 0x8040b5d0: 0000000000000000 0000000080409a60 000000008040aa90 000000008021113e 000000008040aa90 0000000080210cee 0000000000000000 000000008020c01a
stack_dump: 0x8040b610: ffffffffffffff83 0000000000000000 000000008040aa90 000000008020c03a 000000008040aa30 000000008020b6f4 00000000c0200000 000000008040a990
stack_dump: 0x8040b650: 000000008040a828 8000000201842022 000000008040a828 000000000000a288 000000008040a980 0000000080202fae 0000000080400ac8 0000000080408e90
stack_dump: 0x8040b690: 0000000080409a50 804094c000000000 000000000000000b 000000008040a98...
nuttx-sg2000-2024-06-23
Test OK
----- Download the latest NuttX build for 2024-06-23
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.5.1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/ed78646798d4d3ff06ef1937e787c5a5d45f2975
NuttX Apps: https://github.com/apache/nuttx-apps/tree/cda5140c4d1ffa95764df7cb47bbc34b5663adff
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15687256 Jun 23 03:10 /tftpboot/Image-sg2000
----- Power Off the SBC
[]----- Power On the SBC
[]spawn screen /dev/tty.usbserial-0001 115200
SDI/25000000/6000000.BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - 62:88:0a:29:1a:ee
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.88 (544 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.88
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#############################
1.2 MiB/s
done
Bytes transferred = 15687256 (ef5e58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.88
Filename 'jh7110-star64-pine64.dtb'.
Load address: 0x81200000
Loading: * ####
1.2 MiB/s
done
Bytes transferred = 50235 (c43b hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f26e000, end 000000009f27d43a ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.5.1
nsh> uname -a
NuttX 12.5.1 ed78646798 Jun 23 2024 00:14:32 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 11576 2049728 38160 2042848 33 5
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001200 39.2% Idle_Task
1 1 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000704 35.7% lpwork 0x80402370 0x80402398
3 3 100 RR Task - Running 0000000000000000 003008 001520 50.5% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18491 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18490 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2688 2668
fordblks 7e970 7e990
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has no value
show_variable:...
nuttx-sg2000-2024-06-22
Test OK
Script started on Sat Jun 22 09:58:01 2024
Command: /Users/luppy/sg2000/autotest-nuttx-sg2000/scripts/test.sh
+ '[' nuttx-sg2000 == '' ']'
+ '[' '' == '' ']'
++ date +%Y-%m-%d
+ export BUILD_DATE=2024-06-22
+ BUILD_DATE=2024-06-22
+ '[' '' == '' ']'
+ export USB_DEVICE=/dev/tty.usbserial-0001
+ USB_DEVICE=/dev/tty.usbserial-0001
+ set +x
----- Download the latest NuttX build for 2024-06-22
+ wget -q https://github.com/lupyuen/nuttx-sg2000/releases/download/nuttx-sg2000-2024-06-22/nuttx.zip -O /tmp/nuttx.zip
+ pushd /tmp
/tmp ~/sg2000/autotest-nuttx-sg2000/scripts
+ unzip -o nuttx.zip
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.5.1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
+ popd
~/sg2000/autotest-nuttx-sg2000/scripts
+ set +x
NuttX Source: https://github.com/apache/nuttx/tree/d7ab3cc1be3d837bb77c08faba016ff48d6b01be
NuttX Apps: https://github.com/apache/nuttx-apps/tree/cda5140c4d1ffa95764df7cb47bbc34b5663adff
----- Copy NuttX Image to TFTP Server
+ scp /tmp/Image tftpserver:/tftpboot/Image-sg2000
Image 0% 0 0.0KB/s --:-- ETAImage 100% 15MB 49.0MB/s 00:00
+ ssh tftpserver ls -l /tftpboot/Image-sg2000
-rw-r--r-- 1 pi pi 15687256 Jun 22 02:58 /tftpboot/Image-sg2000
+ rm /tmp/Image
+ set +x
+ set +x
----- Power Off the SBC
[]+ set +x
----- Power On the SBC
[]+ script /tmp/test.log /Users/luppy/sg2000/autotest-nuttx-sg2000/scripts/nuttx.exp
Script started, output file is /tmp/test.log
spawn screen /dev/tty.usbserial-0001 115200
BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - 72:e7:b2:9e:3b:93
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete... done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.62 (540 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.62
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#############################
1.2 MiB/s
done
Bytes transferred = 15687256 (ef5e58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.62
Filename 'jh7110-star64-pine64.dtb'.
Load address: 0x81200000
Loading: * ####
1.1 MiB/s
done
Bytes transferred = 50235 (c43b hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f26e000, end 000000009f27d43a ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.5.1
nsh> uname -a
NuttX 12.5.1 d7ab3cc1be Jun 22 2024 00:13:03 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 11576 2049728 38160 2042848 33 5
Page: 20971520 647168 20324352 20324352
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18489 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18489 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has va...
nuttx-sg2000-2024-06-21
Test OK
Script started on Fri Jun 21 08:15:59 2024
Command: /Users/luppy/sg2000/autotest-nuttx-sg2000/scripts/test.sh
+ '[' nuttx-sg2000 == '' ']'
+ '[' '' == '' ']'
++ date +%Y-%m-%d
+ export BUILD_DATE=2024-06-21
+ BUILD_DATE=2024-06-21
+ '[' '' == '' ']'
+ export USB_DEVICE=/dev/tty.usbserial-0001
+ USB_DEVICE=/dev/tty.usbserial-0001
+ set +x
----- Download the latest NuttX build for 2024-06-21
+ wget -q https://github.com/lupyuen/nuttx-sg2000/releases/download/nuttx-sg2000-2024-06-21/nuttx.zip -O /tmp/nuttx.zip
+ pushd /tmp
/tmp /tmp
+ unzip -o nuttx.zip
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.5.1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
+ popd
/tmp
+ set +x
NuttX Source: https://github.com/apache/nuttx/tree/769e65ef8e9e5600c172b8579775164c201e532a
NuttX Apps: https://github.com/apache/nuttx-apps/tree/bc68d954ad01ab28f57fab167a3f0c08cead24cc
----- Copy NuttX Image to TFTP Server
+ scp /tmp/Image tftpserver:/tftpboot/Image-sg2000
Image 0% 0 0.0KB/s --:-- ETAImage 100% 15MB 38.4MB/s 00:00
+ ssh tftpserver ls -l /tftpboot/Image-sg2000
-rw-r--r-- 1 pi pi 15687256 Jun 21 01:16 /tftpboot/Image-sg2000
+ rm /tmp/Image
+ set +x
+ set +x
----- Power Off the SBC
[]+ set +x
----- Power On the SBC
[]+ script /tmp/test.log /Users/luppy/sg2000/autotest-nuttx-sg2000/scripts/nuttx.exp
Script started, output file is /tmp/test.log
spawn screen /dev/tty.usbserial-0001 115200
SDI/25000000/6000000.BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - ea:7e:7a:07:e5:8e
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.149 (539 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.149
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#############################
1.2 MiB/s
done
Bytes transferred = 15687256 (ef5e58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.149
Filename 'jh7110-star64-pine64.dtb'.
Load address: 0x81200000
Loading: * ####
1.1 MiB/s
done
Bytes transferred = 50235 (c43b hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f26e000, end 000000009f27d43a ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.5.1
nsh> uname -a
NuttX 12.5.1 769e65ef8e Jun 21 2024 00:13:08 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 11576 2049728 38160 2042848 33 5
Page: 20971520 647168 20324352 20324352
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18491 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18489 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variabl...
nuttx-sg2000-2024-06-20
Test OK
Script started on Thu Jun 20 08:20:00 2024
Command: /Users/luppy/sg2000/autotest-nuttx-sg2000/scripts/test.sh
+ '[' nuttx-sg2000 == '' ']'
+ '[' '' == '' ']'
++ date +%Y-%m-%d
+ export BUILD_DATE=2024-06-20
+ BUILD_DATE=2024-06-20
+ '[' '' == '' ']'
+ export USB_DEVICE=/dev/tty.usbserial-0001
+ USB_DEVICE=/dev/tty.usbserial-0001
+ set +x
----- Download the latest NuttX build for 2024-06-20
+ wget -q https://github.com/lupyuen/nuttx-sg2000/releases/download/nuttx-sg2000-2024-06-20/nuttx.zip -O /tmp/nuttx.zip
+ pushd /tmp
/tmp /tmp
+ unzip -o nuttx.zip
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.5.1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
+ popd
/tmp
+ set +x
NuttX Source: https://github.com/apache/nuttx/tree/caeb1757f623c8f8dfc951df15833c27f7861fcc
NuttX Apps: https://github.com/apache/nuttx-apps/tree/72150f5035fc0c30b2c4078b0ffd43611dc4ce2c
----- Copy NuttX Image to TFTP Server
+ scp /tmp/Image tftpserver:/tftpboot/Image-sg2000
Image 0% 0 0.0KB/s --:-- ETAImage 100% 15MB 43.2MB/s 00:00
+ ssh tftpserver ls -l /tftpboot/Image-sg2000
-rw-r--r-- 1 pi pi 15687256 Jun 20 01:20 /tftpboot/Image-sg2000
+ set +x
Power off the SBC, press Enter, then power on...
Script started, output file is /tmp/test.log
spawn screen /dev/tty.usbserial-0001 115200
C.SCS/0/0.WD.URPL.SDI/25000000/6000000.BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - e6:b7:73:7f:43:57
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.168 (569 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.168
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#############################
1.2 MiB/s
done
Bytes transferred = 15687256 (ef5e58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.168
Filename 'jh7110-star64-pine64.dtb'.
Load address: 0x81200000
Loading: * ####
1.1 MiB/s
done
Bytes transferred = 50235 (c43b hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f26e000, end 000000009f27d43a ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.5.1
nsh> uname -a
NuttX 12.5.1 caeb1757f6 Jun 20 2024 00:13:38 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 11576 2049728 38160 2042848 33 5
Page: 20971520 647168 20324352 20324352
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18490 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18491 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value...
nuttx-sg2000-2024-06-19
Test OK
Script started on Wed Jun 19 09:04:38 2024
Command: /Users/luppy/sg2000/autotest-nuttx-sg2000/scripts/test.sh
+ '[' nuttx-sg2000 == '' ']'
+ '[' '' == '' ']'
++ date +%Y-%m-%d
+ export BUILD_DATE=2024-06-19
+ BUILD_DATE=2024-06-19
+ '[' '' == '' ']'
+ export USB_DEVICE=/dev/tty.usbserial-0001
+ USB_DEVICE=/dev/tty.usbserial-0001
+ set +x
----- Download the latest NuttX build for 2024-06-19
+ wget -q https://github.com/lupyuen/nuttx-sg2000/releases/download/nuttx-sg2000-2024-06-19/nuttx.zip -O /tmp/nuttx.zip
+ pushd /tmp
/tmp /tmp
+ unzip -o nuttx.zip
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.5.1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
+ popd
/tmp
+ set +x
NuttX Source: https://github.com/apache/nuttx/tree/caa94ef64bd04783d366fab70472e735acbea37e
NuttX Apps: https://github.com/apache/nuttx-apps/tree/00f98947786892eaabf60b2e61fad553aee1c36c
----- Copy NuttX Image to TFTP Server
+ scp /tmp/Image tftpserver:/tftpboot/Image-sg2000
Image 0% 0 0.0KB/s --:-- ETAImage 100% 15MB 38.4MB/s 00:00
+ ssh tftpserver ls -l /tftpboot/Image-sg2000
-rw-r--r-- 1 pi pi 15687256 Jun 19 02:04 /tftpboot/Image-sg2000
+ set +x
Power off the SBC, press Enter, then power on...
Script started, output file is /tmp/test.log
spawn screen /dev/tty.usbserial-0001 115200
C.SCS/0/0.WD.URPL.SDI/25000000/6000000.BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - 7e:bf:71:e2:9b:45
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.69 (555 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.69
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#############################
1.2 MiB/s
done
Bytes transferred = 15687256 (ef5e58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.69
Filename 'jh7110-star64-pine64.dtb'.
Load address: 0x81200000
Loading: * ####
1.2 MiB/s
done
Bytes transferred = 50235 (c43b hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f26e000, end 000000009f27d43a ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.5.1
nsh> uname -a
NuttX 12.5.1 caa94ef64b Jun 19 2024 00:13:00 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 11576 2049728 38160 2042848 33 5
Page: 20971520 647168 20324352 20324352
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18490 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18489 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=Go...
nuttx-sg2000-2024-06-18
Test OK
Script started on Tue Jun 18 19:31:59 2024
Command: /Users/luppy/sg2000/autotest-nuttx-sg2000/scripts/test.sh
+ '[' nuttx-sg2000 == '' ']'
+ '[' 2024-06-18 == '' ']'
+ '[' '' == '' ']'
+ export USB_DEVICE=/dev/tty.usbserial-0001
+ USB_DEVICE=/dev/tty.usbserial-0001
+ set +x
----- Download the latest NuttX build for 2024-06-18
+ wget -q https://github.com/lupyuen/nuttx-sg2000/releases/download/nuttx-sg2000-2024-06-18/nuttx.zip -O /tmp/nuttx.zip
+ pushd /tmp
/tmp /tmp
+ unzip -o nuttx.zip
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.5.1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
+ popd
/tmp
+ set +x
NuttX Source: https://github.com/apache/nuttx/tree/28ae3b38499c6c7bac0d432658da263b9eab2981
NuttX Apps: https://github.com/apache/nuttx-apps/tree/00f98947786892eaabf60b2e61fad553aee1c36c
----- Copy NuttX Image to TFTP Server
+ scp /tmp/Image tftpserver:/tftpboot/Image-sg2000
Image 0% 0 0.0KB/s --:-- ETAImage 100% 15MB 44.2MB/s 00:00
+ ssh tftpserver ls -l /tftpboot/Image-sg2000
-rw-r--r-- 1 pi pi 15687256 Jun 18 12:32 /tftpboot/Image-sg2000
+ set +x
Power off the SBC, press Enter, then power on...
Script started, output file is /tmp/test.log
spawn screen /dev/tty.usbserial-0001 115200
C.SCS/0/0.WD.URPL.SDI/25000000/6000000.BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - 1e:54:48:dc:5b:03
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.153 (422 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.153
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#############################
1.2 MiB/s
done
Bytes transferred = 15687256 (ef5e58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.153
Filename 'jh7110-star64-pine64.dtb'.
Load address: 0x81200000
Loading: * ####
1.2 MiB/s
done
Bytes transferred = 50235 (c43b hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f26e000, end 000000009f27d43a ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.5.1
nsh> uname -a
NuttX 12.5.1 28ae3b3849 Jun 18 2024 03:15:56 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 11576 2049728 38160 2042848 33 5
Page: 20971520 647168 20324352 20324352
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18490 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 18491 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2688 2688
fordblks 7e970 7e970
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2688 2668
fordblks ...