Congratulations, you have now assembled your Strobe-Enhaced Microscopy Stage.
{{BOM}}
Your completed stage should be as shown below.
To power up your stage, you will need two 5V/3A power supplies: one with a USB-C connector{qty:1} for the Raspberry Pi and one with a male 5.5x2.1mm jack connector{qty:1} for the strobe illumination.
! Caution Use a voltage regulator{qty:1} to supply 3V to the strobe. Higher voltage can damage it.
Setting up the software is included in the next section of instructions. It is detailed in "Software Installation" page.