Hosting your bot

Introduction

You will need a VPS (or dedicated server) first. Check out the list at Where to host Telegram Bots if you don't have one already.

First login

Your login details should contain

• The IP address of your server
• Your username (usually root)
• Your password

You should also receive some information on the type of server you got, including Operating System, RAM, storage and monthly traffic.

Once you received that information, you can connect to the server via SSH.

Linux

Run the following command in the terminal and replace <user> with your username and <ip> with your servers IP address:

ssh <user>@<ip>

Confirm that you want to trust the host and enter the password if you are asked to do so.

Windows

Install puTTY and start it.

In the field Host Name (or IP address) enter the IP address of your server. As the connection type, select SSH and set Port to 22. You can save these settings my entering a name in the field below Saved Sessions and clicking Save. Then, click Open and enter your username and password when asked to do so.

Setup

First, install the Python package manager pip (replace python-pip with python3-pip if you want to use Python 3).

apt-get update && apt-get install python-pip

Now, install the python-telegram-bot library (replace pip with pip3 if you're using Python 3):

pip install python-telegram-bot

Finally, confirm the installation (replace python with python3 if you're using Python 3):

python -c "import telegram;print(telegram.__version__)"

Upload your bot's files

Now you can upload your bot to the server. There are multiple ways to do that, one way is to use FileZilla. Install it (if you're on Linux, chances are you already have it) and start it. Open the Server Manager and create a new server with the button on the left. Give it a nice name, then go to the right and fill in the fields:

• Server: Your servers IP address
• Port: 22
• Protocol: SFTP
• Connection type: Normal
• Username: Your username
• Password: Your password

Now, click Connect. You will probably see the /root directory (your user's home directory) on the right and your local files on the left. Create a directory for your bot and upload all the files needed by your bot into that directory.

Start your bot

To run your bot, connect to your server again via SSH (or go back to the connection) and cd into the directory you created. You could now immediately start the bot, but then it would stop working once you disconnect from the server. There are again many ways to make sure that doesn't happen, one way is to use screen.

screen is called a "terminal multiplexer". It creates virtual terminals that you can attach to and detach from and that can run processes without you being logged in.

Create a new screen and attach to it:

screen -S mybot

Start the bot (replace python with python3 if you're using Python 3):

python bot.py

Detach from the screen by holding CTRL and pressing A, then D. You can now disconnect from the server by typing exit if you want.

To re-attach to the screen after you logged back in:

screen -r mybot

Or

screen -d -m mybot

What to read next?

If you plan on hosting multiple bots on your server, it's recommended to use virtualenv. It allows you to install and upgrade Python modules via pip for one project, without worrying how it affects other projects on the server. Read this external article for more information.

Learn about how to use a webhook for your bot in this article.

You might also read the article on Performance Optimizations if you didn't read it yet.