Skip to content

Latest commit

 

History

History
72 lines (56 loc) · 3.37 KB

README.md

File metadata and controls

72 lines (56 loc) · 3.37 KB
Raw

Sigfox End-Point library implementation example on Holtek BC68F2150

Description

This repository shows an example of Sigfox End-Point Library integraton on a HOLTEK low cost transmiter with flash MCU. It uses the code optimization features of the EP-LIB in order to minimize the memory footprint inside the MCU. To have more informations about this design please refer to wiki documentation.

Architecture

This repository contains several source code and project files needed to compile the Low Cost Device (LCD) project. Only the source code files of the EP_LIB are not be included inside this repository: the EP_LIB project is a submodule and must be updated before to upload sources files in middleware/sigfox/sigfox-ep-lib folder.

.                                # Root directory
├── middleware                   # Middleware
│   ├── sigfox                   # Sigfox middleware subdirectory
│   │    ├── sigfox-ep-lib       # EP_LIB submodule
│   │    │    └── ...
│   │    ├── manuf               # EP_LIB manufacturer API specific to this SoC
│   │    │    └── mcu_api.c
│   │    │    └── rf_api.c
│   │    │    └── mcu_rf_api_rodata.c
│   │    │    └── mcu_rf_api_rodata.h
│   │    │    └── TI_aes_128_encr_only.c
│   │    │    └── TI_aes_128_encr_only.h
├── driver                       # Drivers
│   │    ├── src                 # Driver header subdirectory
│   │    │    └── iap.h
│   │    ├── src                 # Driver source subdirectory
│   │    │    └── iap.c
├── output                       # Output generation folder, containing all generated files by IDE
│   ├── *.OBJ
│   ├── *.ASM
│   ├── *.LST
│   └── *...
├── main.c                       # Application source file
├── lcd.opt                      # Project option file
├── lcd.pjt                      # Project file
├── lcd.pjtx                     # Project file
└── README.md

Hardware

The following figure shows the hardware architecture of the Holtek BC68F2150 board.

All gerbers and schematics are available in the wiki of this repository.

Getting Started

Cloning the repository and submodule

$ git clone https://github.com/sigfox-tech-radio/sigfox-ep-example-holtek-bc68f2150.git
$ cd sigfox-ep-example-holtek-bc68f2150
$ git submodule init
$ git submodule update

How to build project

  • Download the HT-IDE3000 software from Holtek web site.
  • Click on pjtx project file to run IDE. Now you are ready to compile and update the source code for your application. For more information on the IDE, compiler, etc... please refer to pdf files available in DOC IDE folder.
  • To configure the EP_LIB flags: right-click on the project > Project Settings > Project Option > Define Symbol.

How to program and debug

  • To flash or debug the device you need to buy a e-link programmer from HOLTEK
  • Connect the device to the programmer and click on the Build/Rebuild button, the flash process will be launched automatically.