SR-IOV Quick Start

English | 简体中文

Spiderpool provides a solution for assigning static IP addresses in underlay networks. In this page, we'll demonstrate how to build a complete underlay network solution using Multus, SR-IOV, Veth, and Spiderpool, which meets the following kinds of requirements:

Applications can be assigned static Underlay IP addresses through simple operations.
Pods with multiple Underlay NICs connect to multiple Underlay subnets.
Pods can communicate in various ways, such as Pod IP, clusterIP, and nodePort.

Prerequisites

System requirements
Make sure a Kubernetes cluster is ready
Helm has already been installed
A SR-IOV-enabled NIC
- Check the NIC's bus-info:
```
~# ethtool -i enp4s0f0np0 |grep bus-info
bus-info: 0000:04:00.0
```
- Check whether the NIC supports SR-IOV via bus-info. If the Single Root I/O Virtualization (SR-IOV) field appears, it means that SR-IOV is supported:
```
~# lspci -s 0000:04:00.0 -v |grep SR-IOV
Capabilities: [180] Single Root I/O Virtualization (SR-IOV)      
```
If your OS is such as Fedora and CentOS and uses NetworkManager to manage network configurations, you need to configure NetworkManager in the following scenarios:
- If you are using Underlay mode, the coordinator will create veth interfaces on the host. To prevent interference from NetworkManager with the veth interface. It is strongly recommended that you configure NetworkManager.
- If you create VLAN and Bond interfaces through Ifacer, NetworkManager may interfere with these interfaces, leading to abnormal pod access. It is strongly recommended that you configure NetworkManager.
```
~# IFACER_INTERFACE="<NAME>"
~# cat > /etc/NetworkManager/conf.d/spidernet.conf <<EOF
[keyfile]
unmanaged-devices=interface-name:^veth*;interface-name:${IFACER_INTERFACE}
EOF
~# systemctl restart NetworkManager
```

Install Spiderpool

Install Spiderpool.
```
helm repo add spiderpool https://spidernet-io.github.io/spiderpool
helm repo update spiderpool
helm install spiderpool spiderpool/spiderpool --namespace kube-system --set sriov.install=true --set multus.multusCNI.defaultCniCRName="sriov-test"
```
When using the helm option --set sriov.install=true, it will install the sriov-network-operator. The default value for resourcePrefix is "spidernet.io" which can be modified via the helm option --set sriov.resourcePrefix.

For users in the Chinese mainland, it is recommended to specify the spec --set global.imageRegistryOverride=ghcr.m.daocloud.io to avoid image pull failures from Spiderpool.

Specify the name of the NetworkAttachmentDefinition instance for the default CNI used by Multus via multus.multusCNI.defaultCniCRName. If the multus.multusCNI.defaultCniCRName option is provided, an empty NetworkAttachmentDefinition instance will be automatically generated upon installation. Otherwise, Multus will attempt to create a NetworkAttachmentDefinition instance based on the first CNI configuration found in the /etc/cni/net.d directory. If no suitable configuration is found, a NetworkAttachmentDefinition instance named default will be created to complete the installation of Multus.
To enable the SR-IOV CNI on specific nodes, you need to apply the following command to label those nodes. This will allow the sriov-network-operator to install the components on the designated nodes.
```
kubectl label node $NodeName node-role.kubernetes.io/worker=""
```
Create VFs on the node

Use the following command to view the available network interfaces on the node:
```
$ kubectl get sriovnetworknodestates -n kube-system
NAME                   SYNC STATUS   AGE
node-1                 Succeeded     24s
...

$ kubectl get sriovnetworknodestates -n kube-system node-1 -o yaml
apiVersion: sriovnetwork.openshift.io/v1
kind: SriovNetworkNodeState
spec: ...
status:
  interfaces:
  - deviceID: "1017"
    driver: mlx5_core
    linkSpeed: 10000 Mb/s
    linkType: ETH
    mac: 04:3f:72:d0:d2:86
    mtu: 1500
    name: enp4s0f0np0
    pciAddress: "0000:04:00.0"
    totalvfs: 8
    vendor: 15b3
  syncStatus: Succeeded
```
If the status of SriovNetworkNodeState CRs is InProgress, it indicates that the sriov-operator is currently synchronizing the node state. Wait for the status to become Succeeded to confirm that the synchronization is complete. Check the CR to ensure that the sriov-network-operator has discovered the network interfaces on the node that support SR-IOV.

Based on the given information, it is known that the network interface's enp4s0f0np0 on the node node-1 supports SR-IOV capability with a maximum of 8 VFs. Now, let's create SriovNetworkNodePolicy CRs and specify PF (Physical function, physical network interface) through nicSelector.pfNames to generate VFs(Virtual Function) on these network interfaces of the respective nodes:
```
$ cat << EOF | kubectl apply -f -
apiVersion: sriovnetwork.openshift.io/v1
kind: SriovNetworkNodePolicy
metadata:
  name: policy1
  namespace: sriov-network-operator
spec:
  deviceType: netdevice
  nodeSelector:
    kubernetes.io/os: "linux"
  nicSelector:
    pfNames:
      - enp4s0f0np0
  numVfs: 8 # desired number of VFs
  resourceName: sriov_netdevice
EOF
```
After executing the above command, please note that configuring nodes to enable SR-IOV functionality may require a node restart. If needed, specify worker nodes instead of master nodes for this configuration. The resourceName should not contain special characters and is limited to [0-9], [a-zA-Z], and "_".

After applying the SriovNetworkNodePolicy CRs, you can check the status of the SriovNetworkNodeState CRs again to verify that the VFs have been successfully configured:
```
$ kubectl get sriovnetworknodestates -n sriov-network-operator node-1 -o yaml
...
- Vfs:
    - deviceID: 1018
      driver: mlx5_core
      pciAddress: 0000:04:00.4
      vendor: "15b3"
    - deviceID: 1018
      driver: mlx5_core
      pciAddress: 0000:04:00.5
      vendor: "15b3"
    - deviceID: 1018
      driver: mlx5_core
      pciAddress: 0000:04:00.6
      vendor: "15b3"
    deviceID: "1017"
    driver: mlx5_core
    mtu: 1500
    numVfs: 8
    pciAddress: 0000:04:00.0
    totalvfs: 8
    vendor: "8086"
...
```
To confirm that the SR-IOV resources named spidernet.io/sriov_netdevice have been successfully enabled on a specific node and that the number of VFs is set to 8, you can use the following command:
```
~# kubectl get  node  node-1 -o json |jq '.status.allocatable'
{
  "cpu": "24",
  "ephemeral-storage": "94580335255",
  "hugepages-1Gi": "0",
  "hugepages-2Mi": "0",
  "spidernet.io/sriov_netdevice": "8",
  "memory": "16247944Ki",
  "pods": "110"
}
```
The sriov-network-config-daemon Pod is responsible for configuring VF on nodes, and it will sequentially complete the work on each node. When configuring VF on each node, the SR-IOV network configuration daemon will evict all Pods on the node, configure VF, and possibly restart the node. When SR-IOV network configuration daemon fails to evict a Pod, it will cause all processes to stop, resulting in the vf number of nodes remaining at 0. In this case, the SR-IOV network configuration daemon Pod will see logs similar to the following:

error when evicting pods/calico-kube-controllers-865d498fd9-245c4 -n kube-system (will retry after 5s) ...

This issue can be referred to similar topics in the sriov-network-operator community issue

The reason why the designated Pod cannot be expelled can be investigated, which may include the following:
1. The Pod that failed the eviction may have been configured with a PodDisruptionBudget, resulting in a shortage of available replicas. Please adjust the PodDisruptionBudget
2. Insufficient available nodes in the cluster, resulting in no nodes available for scheduling

Create a SpiderIPPool instance.

The Pod will obtain an IP address from this subnet for underlying network communication, so the subnet needs to correspond to the underlying subnet that is being accessed. Here is an example of creating a SpiderSubnet instance:：

cat <<EOF | kubectl apply -f -
apiVersion: spiderpool.spidernet.io/v2beta1
kind: SpiderIPPool
metadata:
  name: ippool-test
spec:
  default: true
  ips:
  - "10.20.168.190-10.20.168.199"
  subnet: 10.20.0.0/16
  gateway: 10.20.0.1
  multusName: kube-system/sriov-test
EOF

Create a SpiderMultusConfig instance.

$ cat <<EOF | kubectl apply -f -
apiVersion: spiderpool.spidernet.io/v2beta1
kind: SpiderMultusConfig
metadata:
  name: sriov-test
  namespace: kube-system
spec:
  cniType: sriov
  sriov:
    resourceName: spidernet.io/sriov_netdevice

SpiderIPPool.Spec.multusName: 'kube-system/sriov-test' must be to match the Name and Namespace of the SpiderMultusConfig instance created.

Create applications

Create test Pods and Services via the command below：

cat <<EOF | kubectl create -f -
apiVersion: apps/v1
kind: Deployment
metadata:
  name: sriov-deploy
spec:
  replicas: 2
  selector:
    matchLabels:
      app: sriov-deploy
  template:
    metadata:
      annotations:
        v1.multus-cni.io/default-network: kube-system/sriov-test
      labels:
        app: sriov-deploy
    spec:
      containers:
      - name: sriov-deploy
        image: nginx
        imagePullPolicy: IfNotPresent
        ports:
        - name: http
          containerPort: 80
          protocol: TCP
        resources:
          requests:
            spidernet/sriov_netdevice: '1' 
          limits:
            spidernet/sriov_netdevice: '1'  
---
apiVersion: v1
kind: Service
metadata:
  name: sriov-deploy-svc
  labels:
    app: sriov-deploy
spec:
  type: ClusterIP
  ports:
    - port: 80
      protocol: TCP
      targetPort: 80
  selector:
    app: sriov-deploy 
EOF

Spec descriptions:

spidernet/sriov_netdevice: Sriov resources used.

v1.multus-cni.io/default-network: specifies the CNI configuration for Multus.

For more information on Multus annotations, refer to Multus Quickstart.

Check the status of Pods:

~# kubectl get pod -l app=sriov-deploy -owide
NAME                           READY   STATUS    RESTARTS   AGE     IP              NODE        NOMINATED NODE   READINESS GATES
sriov-deploy-9b4b9f6d9-mmpsm   1/1     Running   0          6m54s   10.20.168.191   worker-12   <none>           <none>
sriov-deploy-9b4b9f6d9-xfsvj   1/1     Running   0          6m54s   10.20.168.190   master-11   <none>           <none>

Spiderpool ensuring that the applications' IPs are automatically fixed within the defined ranges.

~# kubectl get spiderippool
NAME         VERSION   SUBNET         ALLOCATED-IP-COUNT   TOTAL-IP-COUNT   DEFAULT   DISABLE
ippool-test  4         10.20.0.0/16   2                    10               true      false

~#  kubectl get spiderendpoints
NAME                           INTERFACE   IPV4POOL      IPV4               IPV6POOL   IPV6   NODE
sriov-deploy-9b4b9f6d9-mmpsm   eth0        ippool-test   10.20.168.191/16                     worker-12
sriov-deploy-9b4b9f6d9-xfsvj   eth0        ippool-test   10.20.168.190/16                     master-11

Test the communication between Pods:

~# kubectl exec -it sriov-deploy-9b4b9f6d9-mmpsm -- ping 10.20.168.190 -c 3
PING 10.20.168.190 (10.20.168.190) 56(84) bytes of data.
64 bytes from 10.20.168.190: icmp_seq=1 ttl=64 time=0.162 ms
64 bytes from 10.20.168.190: icmp_seq=2 ttl=64 time=0.138 ms
64 bytes from 10.20.168.190: icmp_seq=3 ttl=64 time=0.191 ms

--- 10.20.168.190 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2051ms
rtt min/avg/max/mdev = 0.138/0.163/0.191/0.021 ms

Test the communication between Pods and Services:

Check Services' IPs：

~# kubectl get svc
NAME               TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)              AGE
kubernetes         ClusterIP   10.43.0.1      <none>        443/TCP              23d
sriov-deploy-svc   ClusterIP   10.43.54.100   <none>        80/TCP               20m

Access its own service within the Pod:

~# kubectl exec -it sriov-deploy-9b4b9f6d9-mmpsm -- curl 10.43.54.100 -I
HTTP/1.1 200 OK
Server: nginx/1.23.3
Date: Mon, 27 Mar 2023 08:22:39 GMT
Content-Type: text/html
Content-Length: 615
Last-Modified: Tue, 13 Dec 2022 15:53:53 GMT
Connection: keep-alive
ETag: "6398a011-267"
Accept-Ranges: bytes

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

get-started-sriov.md

get-started-sriov.md

SR-IOV Quick Start

Prerequisites

Install Spiderpool

Create applications

Files

get-started-sriov.md

Latest commit

History

get-started-sriov.md

File metadata and controls

SR-IOV Quick Start

Prerequisites

Install Spiderpool

Create applications