An implementation of the Apple Newton Dock protocol in Swift.
On your computer, run:
swift run tcpThis will start a TCP server on the Newton Dock port 3679.
Once you see Waiting for connection ..., start the Dock application on your Newton and initiate a TCP/IP connection.
The connection is succesfully established once Connected appears, at which point you may enter a command (see below).
On your computer, run:
swift run serial <path-to-serial-device>Where <path-to-serial-device> is the path to the serial device the Newton is connected to. On macOS, you should use the /dev/cu.usbserial-* device which appears when a USB-to-serial adapter is used. On Linux, the device name is likely /dev/ttyUSB* or /dev/ttyS*.
Once you see Waiting for connection ... start the Dock application on your Newton and initiate a serial connection.
The connection is succesfully established once Connected appears, at which point you may enter a command.
keyboard: Start keyboard passthrough. Enter.stopto stop and return to the command prompt.info: Get Newton system informationbackup: Start backup (work in progress)- Notes are exported as HTML files to
~/Library/Application Support/Newton/Backups/Notes/
- Notes are exported as HTML files to
load <path>: Install the package at the given path
Currently only Newton OS 2.x devices (MessagePad 130/2000/2100 and eMate) are supported.
NewtonKit works with the Einstein Newton OS emulator. Make sure to use at least the pre-release version with serial port emulation.
Once you have Einstein running, use socat to create a PTY device for the named pipes created by Einstein:
socat -d -d PTY,raw,mode=666,echo=0,link=$HOME/einstein \
PIPE:$HOME/Library/Application\ Support/Einstein\ Emulator/ExtrSerPortSend\!\!PIPE:$HOME/Library/Application\ Support/Einstein\ Emulator/ExtrSerPortRecvThen start the NewtonKit command line tool:
swift run serial $HOME/einstein