added documentation

README.md

@@ -41,47 +41,45 @@ gapcast.exe -i <interface>
 
 <h1 align="center">Injection Table</h1>
 
-<a align="right" href="https://github.com/ANDRVV/gapcast/wiki/Injection-Table"><img src="https://github.com/ANDRVV/gapcast/blob/main/images/injtype-selection.png?raw=true" alt="Table Injection Example" align="right" width="475"></a>
-<p align="left">The Injection table is a table where you can insert data and perform an injection even <i>without specifying the channel or BSSID</i>. For more info <a href="https://github.com/ANDRVV/gapcast/wiki/Injection-Table">click here</a>.</p>
-<br>
-<br>
-<br>
-<br>
-<br>
-<br>
-<br>
-<br>
-<br>
-<br>
-<br>
-<br>
+<a align="right" href="https://github.com/ANDRVV/gapcast/wiki/Injection-Table"><img src="https://github.com/ANDRVV/gapcast/blob/main/images/injtype-selection.png?raw=true" alt="Table Injection Example" align="right" width="375"></a>
+<p align="left">The Injection table is a table where you can insert data and perform an injection.</p>
+
+<p>Advantages:</p>
+<ul>
+    <li>You don't need to specify the channel.</li>
+    <li>You don't need to specify the BSSID.</li>
+    <li>Multiple synchronized attacks. (Over 100 devices can be attacked simultaneously)</li>
+    <li>Quick and easy attack initialization.</li>
+    <li>Interface with attack information.</li>
+</ul>
+
+<p>For more info <a href="https://github.com/ANDRVV/gapcast/wiki/Injection-Table">click here</a></p>
+
 <br>
 
 <h1 align="center">Parameter techniques</h1>
 <h3>Usage</h3>
 
 <p>Check out the <a href="https://github.com/ANDRVV/gapcast/wiki">wiki</a>!</p>
 
-<h3>Single deep scanning</h3>
+<h3>Single Deep Scanning</h3>
+
+Click for about of [Single Deep Scanning](https://github.com/ANDRVV/gapcast/wiki/Single-deep-scanning)!
 
 ```bash
 ./gapcast -i <iface> -sc 03:e9:58:65:2a:86 -2.4+5g
 ```
 > **Note**
+> 
 > With the `-sc <mac>` parameter scans the target in depth, using this method however discards all the other parameters, except for `-i <iface>` and the band selection such as `-5g` or `-2.4+5g`.
 
-<div align="center" style="display:grid;place-items:center;"> 
-    <p>
-        <a href="https://github.com/ANDRVV/gapcast/wiki/Single-deep-scanning"><img src="https://github.com/ANDRVV/gapcast/blob/main/images/sc.png?raw=true" alt="Single deep scanning output example"></a>
-    </p>
-</div>
-
 <h3>SCAN-ALL-FOR-LONG-TIME</h3>
 
 ```bash
 ./gapcast -i <iface> -2.4+5g -d
 ```
 > **Note**
+> 
 > Scans all 2.4/5 Ghz channels disabling shifting of inactive devices.
 
 <h3>SCAN-ALL-FREQ-OF-ONE-AP</h3>
@@ -90,6 +88,7 @@ gapcast.exe -i <interface>
 ./gapcast -i <iface> -2.4+5g -c 10,36 -p 03:e9:58:65:2a:8
 ```
 > **Note**
+> 
 > *Access Point* that have 5 Ghz and 2.4 Ghz transmit via 2 different addresses, the address for 5 Ghz and the one for 2.4 Ghz. In most cases these 2 addresses have a Mac address with a very similar prefix:
 > 
 > In this case of selecting channel 10 for 2.4 Ghz and channel 36 for 5 Ghz with ```-c <channel>``` uses 2 channels with different bands, using ```-2.4+5g```. Taking into consideration an *Access Point* that has the 5 Ghz address *03:e9:58:65:2a:8e* and the 2.4 Ghz address *03:e9:58:65:2a:86*, the **common prefix** is *03:e9:58:65:2a:8*, which is set via ```-p <mac-prefix>```.
@@ -110,6 +109,7 @@ gapcast.exe -i <interface>
 ./gapcast -i <iface>
 ```
 > **Note**
+> 
 > Scans all 2.4 channels.
 
 <h3>SCAN-5G</h3>
@@ -118,6 +118,7 @@ gapcast.exe -i <interface>
 ./gapcast -i <iface> -5g
 ```
 > **Note**
+> 
 > Scans all 5 Ghz channels adding ```-5g``` parameter.
 
 <h3>SCAN-ALL-RECORDING</h3>
@@ -126,6 +127,7 @@ gapcast.exe -i <interface>
 ./gapcast -i <iface> -2.4+5g -w out.pcap
 ```
 > **Note**
+> 
 > Scans all 2.4/5 Ghz channels, recording it and saving to a pcap file. Registration can be done by adding the ```-w <file>.pcap``` parameter.
 
 <h3>SCAN-AP-DEAUTH-AND-REC-EAPOL</h3>
@@ -134,6 +136,7 @@ gapcast.exe -i <interface>
 ./gapcast -i <iface> -c 11 -b a3:65:1b:56:7e:3c -w out.pcap
 ```
 > **Note**
+> 
 > Scan only channel 11 to get the best WPA 4-Way Handshake, To deauthenticate you need to open the gapcast injection table by pressing **[CTRL-P]**, then select the De-Auth type, enter the required information and start the attack by pressing **CTRL-D** key for a few seconds (check that clients are present via the light-blue bar), as soon as the **CTRL-D** key is deactivated, the clients that reconnect to the *Access Point*:
 > 
 > Will **send and receive EAPOL packets** which you will record and save with the ```-w <file>.pcap``` parameter.
@@ -144,6 +147,7 @@ gapcast.exe -i <interface>
 ./gapcast -l out.pcap
 ```
 > **Note**
+> 
 > If you want to restore data from a previous scan, done with [gapcast](https://github.com/ANDRVV/gapcast), [wireshark](https://github.com/wireshark/wireshark) or other tools and load them on the [gapcast](https://github.com/ANDRVV/gapcast) table to better analyze the data, just insert the ```-l <file>.pcap``` parameter, if you want to restore the data and continue the scan you must add the ```-i <iface>``` parameter and/or add other additional parameters.
 
 <h3>SCAN-ALL-AP</h3>
@@ -152,6 +156,7 @@ gapcast.exe -i <interface>
 ./gapcast -i <iface> -2.4+5g -beacon 
 ```
 > **Note**
+> 
 > If you want to show or record only the *Access Points* you must enter the ```-beacon``` parameter. For this technique, where we show all *Access Points* of all channels it is necessary to add the parameter ```-2.4+5g```.
 
 <p align="center">Obviously there are many other techniques, happy hacking!</p>
@@ -168,9 +173,11 @@ gapcast.exe -i <interface>
 </ul>
 
 > **Note**
+> 
 > If your driver is not supported or if you would like to boot into monitor mode with your changes, just do so before starting gapcast. **If gapcast recognizes that the interface has already set monitor mode, it will not make any changes or even try to restart monitor mode**.
 
 > **Warning**
+> 
 > This function is only available for GNU/Linux systems.
 
 <h1 align="center">Future features</h1>