v2.3.0

What's Changed

• Removed classic mode printer and tuned profiles to match performance
• Added ooze reduction temps to start g-code (inspired by the Technical Ace's profiles)
• Removed any settings that matched PrusaSlicer's default or have been deprecated to simplify configuration
• Removed overhang speed reduction in fast mode.
• Set organic supports as the default. support method
• Tuning adjustments:
  • Enabled external_perimeters_first on fast mode for a SIGNIFICANT increase in surface quality
  • Modified gcode_resolution for finer slicing details
  • Modified the following to improve speeds
    • max_print_speed
    • solid_infill_speed
    • travel_acceleration
  • Modified the following to get smoother perimeters:
    • perimeter_acceleration
    • small_perimeter_speed
  • Modified skirt_distance to bring it slightly closer to print
  • first_layer_height now matches other layer heights
  • slight adjustments to better tune filaments
  • cleaned up Windows install script

• Update readme.md by @BernCarney in #12
• Make script more portable by @spuder in #14
• fix: correct linux directories and proper error handling when no directories are found by @HakonHarnes in #16
• Automate publishing zips by @spuder in #10

New Contributors

• @BernCarney made their first contribution in #12
• @HakonHarnes made their first contribution in #16

Full Changelog: v2.2.0...v2.3.0