A PAM authentication module for Linux using USB Flash Drives. This module will allow you to login to your system by inserting a USB drive, without the need to type a password.
To get a copy of this software download or clone the GitHub repository.
Download:
wget https://github.com/LuisRusso/PamUUID/archive/master.zip
Clone:
git clone [email protected]:LuisRusso/PamUUID.git
This package was tested with Debian and FreeBSD, it will most likely work with other Linux distributions and UNIX variants. Some version of the following components must exist in the system.
For Linux:
For FreeBSD:
- devd
- C compiler, gcc or clang
- Make
- PAM library
First check that you have the PAM library is installed. In Debian this can be obtained by running:
apt-get install libpam0g-dev
Once this is installed you can check if everything is ok by compiling the project. Simply execute
make
If all went well your build system is working. Otherwise if the PAM lib is missing your compile will complain about this line.
#include <security/pam_modules.h>
Next determine if your system has the appropriate udev
components. List the directory /dev/disk/by-uuid/ with:
ls /dev/disk/by-uuid/
This directory should exist. Otherwise you, most likely, do not have the necessary components. Check with your distribution if it is located elsewhere.
Now insert the pendrive you intend to use and list the directory again. Check that a new file appears.
The name of the file corresponds to the uuid of the filesystem in the drive. It will be unique to your system and it should have the folowing format:
-
For most filesystems 32 hex digits separated as xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx (version 4 UUIDs), e.g.,
7cec6c81-9eaa-44ad-8d6c-e607f3101627. -
For vfat filesystems 8 hex digits separated as xxxx-xxxx, e.g.,
4059-33BB.
For more info check Wikipedia.
If several files appeared or you are unsure about the correct UUID to use you can run the following command:
ls -lh /dev/disk/by-uuid/
This lists the devices associated to the UUIDs, for all the partitions in your system.
You can now edit the file pam_uuid.h file. This file was created by the
initial make.
editor pam_uuid.h
Locate the following line:
{"John", "/dev/disk/by-uuid/", "7cec6c81-9eaa-44ad-8d6c-e607f3101627", plain},
If your username is John then congratulations you only need to change the UUID, the third entry in the list. Otherwise update the username also ;-)
You can also add more of these lines, for other users, or other pens.
For now the only authentication method is plain, so leave it.
Next compile the module. Run
make
After it compiles successfully you need to install it as root:
sudo make install
This copies the module to the /lib/security directory. You can list the
directory to make sure it is Ok. If the directory does not exist check with
your distribution and copy to the appropriate location.
The final step is authorizing the module. Edit the
/etc/pam.d/common-auth file as root.
sudo editor /etc/pam.d/common-auth
Add the following line before any other authorization:
auth sufficient pam_uuid.so
In this case the module becomes sufficient for authentication. You may use more elaborated configurations, for example a two-factor authentication process.
First check that you have the PAM library is installed. Make sure you installed the system with the dev option. You can check if everything is ok by compiling the project. Simply execute
make
If all went well your build system is working. Otherwise if the PAM lib is missing your compile will complain about this line.
#include <security/pam_modules.h>
Next determine if your system has the appropriate devd
components. List the directory /dev/diskid/ with:
ls /dev/diskid/
In FreeBSD this directory might not exist and everything is Ok. The directory will show up when you insert the pendrive.
Now insert the pendrive you intend to use and list the directory again. Check that a new file appears.
In FreeBSD the file should look something like
DISK-7CEC6C819EAA44AD8D6CE607 and is associated to the device not the
partition. In fact there should also be partition files that end in s1,
s2, etc.
You can now edit the file pam_uuid.h file. This file was created by the
initial make.
editor pam_uuid.h
Comment out the line:
{"John", "/dev/disk/by-uuid/", "7cec6c81-9eaa-44ad-8d6c-e607f3101627", plain},
and uncomment the line
/* {"John", "/dev/diskid/", "DISK-7CEC6C819EAA44AD8D6CE607", plain}, */
If your username is John then congratulations you only need to change the diskid file, the third entry in the list. Otherwise update the username also ;-)
You can also add more of these lines, for other users, or other pens.
For now the only authentication method is plain, so leave it.
Next compile the module. Run
make
After it compiles successfully you need to install it as root:
sudo make install
This copies the module to the /usr/lib directory. You can list the
directory to make sure it is Ok.
The final step is authorizing the module. Edit the file
/etc/pam.d/login as root.
sudo editor /etc/pam.d/login
Add the following line before any other authorization:
auth sufficient pam_uuid.so
In this case the module becomes sufficient for authentication. You may use more elaborated configurations, for example a two-factor authentication process.
If I install this module can I still login with a password?
Yes. You just won't have to.
This module is not what I wanted. How do I remove it?
If you want to remove it you need to call the makefile again as root. Execute
sudo make deinstall
This deletes the module from the install directory. In case the module did not met your expectations or you need some specific feature consider creating an issue about it or emailing me [email protected].
This module is pretty cool. How can I help?
Share it with your friends. Consider creating an issue with suggestions or just send a "thank you" email to [email protected].
Do I have to use an UUID ?
No. All that the module does is to check if the file exists in your
filesystem. Therefore you can use any file, whatsoever. That being said, it
is probably a bad idea to use a file that resides permanently in the
filesystem. However you may want to use the labels of the filesystems. In
linux these reside in /dev/disk/by-label. In this case you may need to
use e2label for ext filesystems or fatlabel for fat filesystems. In
FreeBSD you might want to look into glabel.
If you have a spare pen you may want to use it as a backup authentication pen. Just in case you lose your primary pen. In this case just use the same label in both pens.
How safe is PamUUID?
Depends on your usage. The module does not grant access to ssh logins.
If you have a pen that is registered in your pam_uuid.h it is
best not to insert it in any other computer, as the UUID and labels are
clearly accessible.
It is safer if you are using two factor authentication. In which case make sure to have a backup authentication pen.
This works for login but not for my screen saver?
Make sure to use a locker or screen saver that uses PAM, for example sxlock.
If you found this project useful please share it, also you can create an issue with comments and suggestions.
We use SemVer for versioning. For the versions available, see the tags on this repository.
- Luís M. S. Russo - Initial work - LuisRusso
See also the list of contributors who participated in this project.
This project is licensed under the BSD 2-Clause "Simplified" License - see the LICENSE file for details
- This project was inspired by the pamusb project.
- This software uses a suckless approach.
- Thanks to PurpleBooth for the README-Template.
- The grip tool by Joe Esposito was very handy for producing this file.