PowerDNS Community Cookbook

Provides resources for installing and configuring both PowerDNS authoritative and recursor. It uses the official PowerDNS repositories for packages and installs the appropriate configuration for your platform's init system.

Build Status

Upgrade Notes for 8.x series

Please note that this version primarily supports PowerDNS 4.4 and PowerDNS Recursor 4.4. Older versions may work, but are not as heavily tested. Additionally support for Ubuntu 16.04 has been dropped.

When upgrading to the 8.x series, please note that virtual recursor instances now enforce the socket directory location for compatibility with the default systemd service unit.

Upgrade Notes for 7.x series

Please note that this version primarily supports PowerDNS 4.3 and PowerDNS Recursor 4.3. Older versions may work, but are not as heavily tested. Additionally support for CentOS 6 / sysvinit has been dropped.

When upgrading to the 7.x series, please pay special attention to your config and service resources which use the run_user / run_group / setuid / setgid properties. We have removed these attributes to better match the direction of upstream PowerDNS.

Upgrade Notes for 6.x series

When upgrading to the 6.x series, please pay special attention to your config and service resources which use the instance_name property. We have introduced a new virtual property to the config and service resources to more clearly mark them as a virtual instance versus the default one configured via the install resource. If you used instance_name '' to refer to the default instance, you can safely remove this property or leave it as-is. If you do use another name, then you will want to set virtual true in your config and service resources.

We have also changed the behavior of the socket_dir property on the service resources because it was incorrectly setup. It will be removed in a future release as it is a source of confusion (and bug) and a more advanced option for very specific use cases.

Ubuntu >=18.04 notes

Operating systems like Ubuntu 18.04 and greater that ship with systemd-resolved configured to run by default will need this disabled and to manually configure your resolv.conf if you are running PowerDNS Authoritative on default ports. You can look at the test cookbook for a simple example of how to handle this.

Requirements

Platforms:

• Ubuntu 18.04 and newer
• Debian 9 and newer
• RHEL 7 and newer
• CentOS 7 and newer

Chef:

• Chef 15 or newer

Init Systems:

• systemd

Usage

Combine the different resources in order to install, configure, and manage your PowerDNS instances. This is a list of resouces that can be used:

Resource	Functionality
pdns_authoritative_install	Installs an authoritative server
pdns_authoritative_config	Configures an authoritative instance
pdns_authoritative_service	Manages an authoritative instance
pdns_recursor_install	Installs a recusor
pdns_recursor_config	Configures a recursor instance
pdns_recursor_service	Manages a a recursor instance

To fully configure an authoritative server you need to add at least 3 resources to your recipe, pdns_authoritative_install, pdns_authoritative_config and pdns_authoritative_service. If you want to install any backend other than the default (bind) for the authoritative server you need to install the corresponding packages for the backend you want. There is an example for a postgresql backend in test/cookbooks/pdns_test/recipes/.

For a recursor use the pdns_recursor_install, pdns_recursor_config, and pdns_recursor_service resources in your wrapper cookbooks to install, configure, and define PowerDNS recursors. Set the different properties on the resources according to your install and configuration needs. You can see a good example of this in test/cookbooks/pdns_test/recipes_recursor_install_single.rb

For advanced use it is recommended to take a look at the chef resources themselves.

Properties

Virtual instances and instance name

If you wish to create multiple running copies of PowerDNS via Virtual Configurations you can set the virtual property on both the config and service resources. The name of the virtual instance will default to either the name of the resource or the 'instance_name' value of the resource if it is set. PowerDNS parses the name of the instance by breaking apart the first hyphen it sees so all virtual service names start with the service type and a hyphen. For example:

pdns_authoritative_config 'server_01' do
  virtual true
  launch ['gpgsql']
  variables(
    gpgsql_host: '127.0.0.1',
    gpgsql_user: 'pdns',
    gpgsql_port: 5432,
    gpgsql_dbname: 'pdns',
    gpgsql_password: 'wadus'
  )
  action :create
end

pdns_authoritative_service 'service_01' do
  virtual true
  action [:enable, :start]
end

Will create a file named /etc/powerdns/pdns-server_01.conf:

launch ['gpgsql']
gpgsql-host=127.0.0.1
gpgsql-user=pdns
gpgsql-port=5432
gpgsql-dbname=pdns
gpgsql-password=wadus

General note about resource properties

Most properties are simple ruby strings, but there are cases that require special attention. Properties specified as elements in arrays will be split up (see split ruby method) and separated by commas.

Boolean properties will be always translated to 'yes' or 'no'.

Some properties need to be set consistently across resources, they will be noted in their specific sections at the top under 'Consistent?'.

Most of the properties are optional and have sane defaults, so they are only recommended for customized installs.

pdns_authoritative_install

Installs PowerDNS authoritative server 4.4.x series using PowerDNS official repository in the supported platforms.

Properties

Name	Type	Default value
version	String	''
series	String	'44'
debug	true, false	false
allow_upgrade	true, false	false
backends	Array	nil

Note: When specifying backends, the name of the backend must match the repository package. For example, in Debian systems the Postgresql backend is actually named pgsql while on RHEL systems it is postgresql. Consider using the value_for_platform if you are installing on multiple platforms. There is an example of this technique in the test folder cookbook recipe.

Usage examples

Install the latest 4.4.x series PowerDNS Authoritative Server

pdns_authoritative_install 'server_01'

Install the latest 4.3.x series PowerDNS Authoritative Server

pdns_authoritative_install 'server_01' do
  series '43'
end

Install and upgrade to the latest 4.4.x PowerDNS Authoritative Server release

pdns_authoritative_install 'server_01' do
  series '43'
  allow_upgrade true
end

Install the latest 4.4.x series PowerDNS Authoritative Server with the MySQL and Lua backends

pdns_authoritative_install 'server_01' do
  series '44'
  backends ['mysql', 'lua']
end

pdns_authoritative_config

Creates a PowerDNS authoritative configuration, there is a fixed set of required properties (listed below) but most of the configuration is left to the user freely, every property set in the variables hash property will be rendered in the config template. Remember that using underscores _ for property names is required and it's translated to hyphens - in configuration templates.

Properties

Name	Class	Default value	Consistent?
instance_name	String	name_property	Yes
cookbook	String,nil	'pdns'	No
launch	Array, nil	['bind']	No
config_dir	String	see default_authoritative_config_directory helper method	Yes
socket_dir	String	"/var/run/#{resource.instance_name}"	Yes
source	String,nil	'authoritative.conf.erb'	No
variables	Hash	{ bind_config: "#{resource.config_dir}/bindbackend.conf" }	No
virtual	Boolean	false	No

• cookbook : Cookbook for a custom configuration template.
• launch : Backends to launch with the service.
• config_dir : Path of the recursor configuration directory.
• socket_dir : Directory where sockets are created.
• source : Name of the recursor custom template.
• variables: Variables for the configuration template.
• virtual : Is this a virtual instance or the default?

Usage Example

Create a PowerDNS authoritative configuration file named server-01:

pdns_authoritative_config 'server_01' do
  virtual true
  launch ['gpgsql']
  variables(
    gpgsql_host: '127.0.0.1',
    gpgsql_user: 'pdns',
    gpgsql_port: 5432,
    gpgsql_dbname: 'pdns',
    gpgsql_password: 'wadus',
    allow_axfr_ips: [ '127.0.0.0/8', '::1', '195.234.23,34'],
    api: true,
    api-_eadonly: true
    )
  action :create
end

pdns_authoritative_service

Creates a service to manage a PowerDNS authoritative instance. This service supports all the regular actions (start, stop, restart, etc.). Check the compatibility section to see which init services are supported.

Important: services are not restarted or reloaded automatically on config changes in this cookbook, you need to add this in your wrapper cookbook if you desire this functionality, the pdns_authoritative_service cookbook provides actions to do it.

Properties

Name	Class	Default value	Consistent?
instance_name	String	name_property	Yes
config_dir	String	See default_authoritative_config_directory helper method	Yes
virtual	Boolean	false	No

Usage example

To enable and start the default PowerDNS Authoritative server

pdns_authoritative_service 'default' do
  action [:enable, :start]
end

To enable and start a virtual PowerDNS instance called 'server_01'

pdns_authoritative_service 'server_01' do
  virtual true
  action [:enable, :start]
end

pdns_recursor_install

Installs PowerDNS recursor 4.4.x series using PowerDNS official repository in the supported platforms.

Properties

Name	Type	Default value
version	String	''
series	String	'44'
debug	true, false	false
allow_upgrade	true, false	false

Usage examples

Install the latest 4.4.x release PowerDNS recursor

pdns_recursor_install 'latest_4_3_x_recursor'

Install the latest 4.3.x release PowerDNS recursor

pdns_recursor_install 'my_recursor' do
  series '43'
end

Install and upgrade to the latest 4.4.x PowerDNS recursor release

pdns_recursor_install 'my_recursor' do
  series '44'
  allow_upgrade true
end

pdns_recursor_config

Creates a PowerDNS recursor configuration.

Properties

Name	Class	Default value	Consistent?
instance_name	String	name_property	Yes
cookbook	String,nil	'pdns'	No
config_dir	String	see default_recursor_config_directory helper method	Yes
socket_dir	String	"/var/run/#{resource.instance_name}"	Yes
source	String,nil	'recursor.conf.erb'	No
variables	Hash	{}	No
virtual	Boolean	false	No

• cookbook : Cookbook for a custom configuration template.
• config_dir : Path of the recursor configuration directory.
• socket_dir : Directory where sockets are created.
• source : Name of the recursor custom template.
• variables: Variables for the configuration template.
• virtual : Is this a virtual instance or the default?

pdns_recursor_service

Sets up a PowerDNS recursor instance.

Important: services not restarted or reloaded automatically on config changes in this cookbook, you need to add this in your wrapper cookbook if you desire this functionality, the pdns_recursor_service cookbook provides actions to do it.

Properties

Name	Class	Default value	Consistent?
instance_name	String	name_property	Yes
config_dir	String	See default_recursor_config_directory helper method	Yes
virtual	Boolean	false	No

Usage Example

Disable the default PowerDNS recursor install service

pdns_recursor_service 'default' do
  action [:disable, :stop]
end

Configure a virtual PowerDNS recursor service instance named 'my_recursor' in your wrapper cookbook for Acme Corp with a custom template named my-recursor.erb

pdns_recursor_service 'my_recursor' do
  virtual true
  source 'my-recursor.erb'
  cookbook 'acme-pdns-recursor'
end

Usage Example

Customize the default recursor installation and change it's port to 54:

pdns_recursor_config 'default' do
  variables(
    'local-port' => '54'
  )
end

Create a PowerDNS recursor configuration named 'my_recursor' in your wrapper cookbook for Acme Corp which uses a custom template named my-recursor.erb and a few attributes:

pdns_recursor_config 'my_recursor' do
  virtual true
  source 'my-recursor.erb'
  cookbook 'acme-pdns-recursor'
  variables(client-tcp-timeout: '20', loglevel: '5', network-timeout: '2000')
end

Virtual Hosting

PowerDNS supports virtual hosting: running many instances of PowerDNS on different ports on the same machine. This cookbook leverages this functionality in both recursor and authoritative. For recursor virtual hosts, the socket directory is strictly enforced to support the default systemd service unit.

Contributing

There is an specific file for contributing guidelines on this cookbook: CONTRIBUTING.md

Testing

There is an specific file for testing guidelines on this cookbook: TESTING.md

License

Copyright (c) 2010-2014, Chef Software, Inc Copyright (c) 2014-2021, DNSimple Corporation

Licensed under the Apache License, Version 2.0.