v4.1.4

What's Changed

• Z-Way v4.1.4

v4.1.3 Release

• Update of the Z-Way version from 4.1.3
• Fixed a problem with remote access, if you have ID 197811, it will be replaced with a new one. Also, at the first launch, a new unique ID will be obtained
• An additional port input field has been added, this field is required if you are going to use an additional adapter in Z-Way, for example ZigBee or EnOcean or Z-Station.
• The image size has been reduced, now it is not based on the virtual environment of Raspberry Pi from balena, now we use the debian image from home assistant, everything now works in the hassio environment
• We also switched to the s6-overlay launch system, for better compatibility with the Home Assistant
• Removed useless ports 1883 and 8883, which interfered with the mqtt broker
• Added a field with a choice of logging level, disabled by default so as not to torment the microSD memory card, if you need logs, just specify the value 0

v4.1.0 Release

New Z-Way v4.1.0.
Fixes the wrong path in config.json after reset.

v4.0.3 Release

Initial release with Z-Way v4.0.3

With the support of:

• Remote access and remote support
• Local IP and RaZberry/Z-Station/UZB port settings
• Colourful log

v1.0.0 Release

Update README.md