mightyBugA-rust-firmware

Firmware for the MightyBugA line follower done in Rust programming language

The design files for the main board can be found at: https://github.com/aindustriosa/RustyBugA-board

Tested on Ubuntu Linux

Toolchain install

Installing:

curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh

Setup:

rustup update
rustup component add llvm-tools-preview
rustup target add thumbv7m-none-eabi
cargo install cargo-binutils cargo-embed cargo-flash cargo-expand
cargo install cargo-generate arm-toolchain

wget https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/10.3-2021.10/gcc-arm-none-eabi-10.3-2021.10-x86_64-linux.tar.bz2

mkdir /home/$USER/arm-gcc/
tar -xf gcc-arm-none-eabi-10.3-2021.10-x86_64-linux.tar.bz2 -C /home/$USER/arm-gcc/

code docs

cargo doc --open

Upload the firmware to the MCU

cargo xtask mightybuga_bsc example blink # use 'cargo xtask help' for a complete list of options

Set the environment variable UPLOAD_TOOL (default is openocd) to use your prefered tool for uploading the firmware to the flash memory of the MCU:

tools	UPLOAD_TOOL	notes
OpenOCD + STLink-v2 probe	openocd	This is the default.
BlackMagicProbe	blackmagic	BMP_PORT variable to set the device where the BMP is connected (default is /dev/ttyACM0).

Example to use BMP:

export UPLOAD_TOOL=blackmagic
cargo xtask run app hello_world

Debugging

Go to the documentation for debugging.

References

Forked from https://cgit.pinealservo.com/BluePill_Rust/blue_pill_base

Other references:

• https://github.com/punkto/rust_stm32f4_discovery_example/tree/main

Sponsor

Esta actividade está patrocinada pola Xunta de Galicia e pola Axencia Para a Modernización Tecnolóxica (AMTEGA).