Rework docs; move README.md contents into docs/index.md

Prep for further extending/clarifying the docs.

Signed-off-by: Colin Walters <[email protected]>

README.md

@@ -2,8 +2,6 @@
 
 Transactional, in-place operating system updates using OCI/Docker container images.
 
-STATUS: Experimental, subject to change!
-
 # Motivation
 
 The original Docker container model of using "layers" to model
@@ -17,171 +15,6 @@ which is used to boot.  At runtime on a target system, the base userspace is
 *not* itself running in a container by default.  For example, assuming
 systemd is in use, systemd acts as pid1 as usual - there's no "outer" process.
 
-## ostree
-
-This project currently leverages significant work done in
-[the ostree project](https://github.com/ostreedev/ostree-rs-ext/).
-
-In the future, there may be non-ostree backends.
-
-## Modeling operating system hosts as containers
-
-The bootc project suggests that Linux operating systems and distributions
-to provide a new kind of "bootable" base image, distinct from "application"
-base images.  See below for available images.
-
-Effectively, these images contain a Linux kernel - and while this kernel
-is not used when the image is used via e.g. `podman|docker run`, it *is*
-used when booted via `bootc`.
-
-In the current defaults, `/etc` and `/var` both act a bit like
-mounted, persistent volumes.  More on this in [the ostree docs](https://ostreedev.github.io/ostree/adapting-existing/#system-layout).
-
-## Status
-
-The core `bootc update` functionality is really just the same
-technology which has shipped for some time in rpm-ostree so there
-should be absolutely no worries about using it for OS updates.
-A number of people do this today.
-
-That said bootc is in active development and some parts
-are subject to change, such as the command line interface and
-the CRD-like API exposed via `bootc edit`.`
-
-The `bootc install` functionality is also more experimental.
-
-## Using bootc
-
-### Installing
-
- * Fedora: [bootc is packaged](https://bodhi.fedoraproject.org/updates/?packages=bootc) and be available in the main repositories soon.
- * CentOS Stream 9: There is a [COPR](https://copr.fedorainfracloud.org/coprs/rhcontainerbot/bootc/) tracking git main with binary packages.
-
-You can also build this project like any other Rust project, e.g. `cargo build --release` from a git clone.
-
-### Base images
-
-Many users will be more interested in base (container) images.
-
-To build base images "from scratch", see [docs/bootc-images.md](docs/bootc-images.md).
-
-For pre-built base images:
-
-* [Fedora CoreOS](https://quay.io/repository/fedora/fedora-coreos) can be used as a base image; you will need to [enable bootc](https://github.com/coreos/rpm-ostree/blob/main/docs/bootc.md) there.
-* There is also an in-development [Project Sagano](https://github.com/centos/sagano) for Fedora/CentOS.
-
-However, bootc itself is not tied to Fedora derivatives; [this issue](https://github.com/coreos/bootupd/issues/468) tracks the main blocker for other distributions.
-
-### Deriving from and switching to base images
-
-A toplevel goal is that *every tool and technique* a Linux system
-administrator knows around how to build, inspect, mirror and manage
-application containers also applies to bootable host systems.
-
-There are a number of examples in e.g. [coreos/layering-examples](https://github.com/coreos/layering-examples).
-
-First, build a derived container using any container build tooling.
-
-#### Using `bootc install`
-
-The `bootc install` command will write the current container to a disk, and set it up for booting.
-In brief, the idea is that every container image shipping `bootc` also comes with a simple
-installer that can set a system up to boot from it.  Crucially, if you create a 
-*derivative* container image from a stock OS container image, it also automatically supports `bootc install`.
-
-For more information, please see [docs/install.md](docs/install.md).
-
-#### Switching from an existing ostree-based system
-
-If you have [an operating system already using ostree](https://ostreedev.github.io/ostree/#operating-systems-and-distributions-using-ostree) then you can use `bootc switch`:
-
-```
-$ bootc switch --no-signature-verification quay.io/examplecorp/custom:latest
-```
-
-This will preserve existing state in `/etc` and `/var` - for example,
-host SSH keys and home directories.  There may be some issues with uid/gid
-drift in this scenario however.
-
-### Upgrading
-
-Once a chosen container image is used as the boot source, further
-invocations of `bootc upgrade` will look for newer versions - again
-preserving state.
-
-## Relationship with other projects
-
-### Relationship with podman
-
-It gets a bit confusing to talk about shipping bootable operating systems in container images.
-Again, to be clear: we are reusing container images as:
-
-- A build mechanism (including running *as* a standard OCI container image)
-- A transport mechanism
-
-But, actually when a bootc container is booted, podman (or docker, etc.) is not involved.
-The storage used for the operating system content is distinct from `/var/lib/containers`.
-`podman image prune --all` will not delete your operating system.
-
-That said, a toplevel goal of bootc is alignment with the https://github.com/containers ecosystem,
-which includes podman.  But more specifically at a technical level, today bootc uses
-[skopeo](https://github.com/containers/skopeo/) and hence indirectly [containers/image](https://github.com/containers/image)
-as a way to fetch container images.
-
-This means that bootc automatically also honors many of the knobs available in `/etc/containers` - specifically
-things like [containers-registries.conf](https://github.com/containers/image/blob/main/docs/containers-registries.conf.5.md).
-
-In other words, if you configure `podman` to pull images from your local mirror registry, then `bootc` will automatically honor that as well.
-
-The simple way to say it is: A goal of `bootc` is to be the bootable-container analogue for `podman`, which runs application containers.  Everywhere one might run `podman`, one could also consider using `bootc`. 
-
-### Relationship with Kubernetes
-
-Just as `podman` does not depend on a Kubernetes API server, `bootc` will also not depend on one.
-
-However, there are also plans for `bootc` to also understand Kubernetes API types.  See [configmap/secret support](https://github.com/containers/bootc/issues/22) for example.
-
-Perhaps in the future we may actually support some kind of `Pod` analogue for representing the host state.  Or we may define a [CRD](https://kubernetes.io/docs/concepts/extend-kubernetes/api-extension/custom-resources/) which can be used inside and outside of Kubernetes.
-
-### Relationship with rpm-ostree
-
-Today rpm-ostree directly links to `ostree-rs-ext`, and hence
-gains all the same container functionality.  This will likely
-continue.  For example, with rpm-ostree (or, perhaps re-framed as
-"dnf image"), it will continue to work to e.g. `dnf install`
-(i.e. `rpm-ostree install`) on the *client side* system.  However, `bootc upgrade` would
-(should) then error out as it will not understand how to upgrade
-the system.
-
-rpm-ostree also has significant other features such as
-`rpm-ostree kargs` etc.
-
-Overall, rpm-ostree is used in several important projects
-and will continue to be maintained for many years to come.
-
-However, for use cases which want a "pure" image based model,
-using `bootc` will be more appealing.  bootc also does not
-e.g. drag in dependencies on `libdnf` and the RPM stack.
-
-bootc also has the benefit of starting as a pure Rust project;
-and while it [doesn't have an IPC mechanism today](https://github.com/containers/bootc/issues/4), the surface
-of such an API will be significantly smaller.
-
-Further, bootc does aim to [include some of the functionality of zincati](https://github.com/containers/bootc/issues/5).
-
-But all this said: *It will be supported to use both bootc and rpm-ostree together*; they are not exclusive.
-For example, `bootc status` at least will still function even if packages are layered.
-
-### Relationship with Fedora CoreOS (and Silverblue, etc.)
-
-Per above, it is a toplevel goal to support a seamless, transactional update from existing OSTree based systems, which includes these Fedora derivatives.
-
-For Fedora CoreOS specifically, see [this tracker issue](https://github.com/coreos/fedora-coreos-tracker/issues/1446).
-
-See also [OstreeNativeContainerStable](https://fedoraproject.org/wiki/Changes/OstreeNativeContainerStable).
-
-# More links
-
-- https://coreos.github.io/rpm-ostree/container/
-- https://github.com/coreos/layering-examples
+# More information
 
+See the [project documentation](https://containers.github.io/bootc/).

docs/_config.yml

@@ -0,0 +1,58 @@
+title: containers/bootc
+description: bootc documentation
+baseurl: "/bootc"
+url: "https://containers.github.io"
+# Comment above and use below for local development
+# url: "http://localhost:4000"
+permalink: /:title/
+markdown: kramdown
+kramdown:
+  typographic_symbols:
+    ndash: "--"
+    mdash: "---"
+
+# Exclude the README and the bundler files that would normally be
+# ignored by default.
+exclude:
+  - README.md
+  - Gemfile
+  - Gemfile.lock
+  - prep-docs.sh
+  - vendor/
+
+# These are copies of the apidoc/html and man/html directories. Run
+# prep-docs.sh before jekyll to put it in place.
+include: [reference, man]
+
+remote_theme: just-the-docs/[email protected]
+plugins:
+  - jekyll-remote-theme
+
+color_scheme: coreos
+
+# Aux links for the upper right navigation
+aux_links:
+  "bootc on GitHub":
+    - "https://github.com/containers/bootc"
+
+footer_content: "Copyright &copy; <a href=\"https://www.redhat.com\">Red Hat, Inc.</a> and <a href=\"https://github.com/containers\">others</a>."
+
+# Footer last edited timestamp
+last_edit_timestamp: true
+last_edit_time_format: "%b %e %Y at %I:%M %p"
+
+# Footer "Edit this page on GitHub" link text
+gh_edit_link: true
+gh_edit_link_text: "Edit this page on GitHub"
+gh_edit_repository: "https://github.com/containers/bootc"
+gh_edit_branch: "main"
+gh_edit_source: docs
+gh_edit_view_mode: "tree"
+
+compress_html:
+  clippings: all
+  comments: all
+  endings: all
+  startings: []
+  blanklines: false
+  profile: false

docs/bootc-images.md

@@ -1,4 +1,8 @@
-# Understanding "bootc compatible" images
+---
+nav_order: 2
+---
+
+# "bootc compatible" images
 
 At the current time, it does not work to just do:
 ```