DISCLAIMER: This is a research project, and while it is open-source and invites collaboration, it is not approved by the FDA nor do these hacks undergo any form of formal testing at this stage. Any use of the any portion of this or any other hackathon project is at your own risk. Any files, designs, suggestions, etc. are posted for design and research collaboration purposes.
Use at your own risk
** No claims are made or guaranteed, in general and specifically for the effectiveness, safety, or any other property of the hacks, projects, ideas and/or designs **
This repository holds work being done towards an open source breast pump, as result of the MIT Media Lab's "Make the Breast Pump not Suck" Hackathon.
Currently it contains the initial version of the Silicone Diaphragm Adapter, which fit the Ameda Silicone Diaphragms, and contain a generic port on each side.
Improvements need to be made for interlocking of the two parts, as well as wall-thickness for printing on FormLabs printers.
Tests on the Medela Pump-in-Style suggest that using two adapters (in parallel) might be required to support the full range of pressure.
Please contact [email protected] and/or [email protected] for further details, or if you are interested in collaboration.