YUKI is a split diodless keyboard with a column stagger layout heavily inspired from cantor.
Made with keyberon.
- layer 0 (firmware dvorak)
- layer 1 (numbers and symbols)
- layer 2 (the rest of the keys of an TKL board)
- layer 3 (mouse movement and buttons)
- layer 4 (qwerty)
- 2 Custom PCBs (files for which can be found in the yuki_pcb directory)
- 2 stm32f401 boards
- 2 TRRS connectors
- 44 cherry mx switches
- 44 cherry mx keycaps
- TRRS cable
- USB A to C cable
You will need rust installed so:
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
cargo-binutils for stripping unused data from the rust binary and other optimizations:
rustup component add llvm-tools
cargo install cargo-binutils
dfu-util for flashing:
sudo pacman -S dfu-util
add the rust target for the MCU:
rustup target add thumbv7em-none-eabihf
then to compile the firmware:
cargo objcopy --bin yuki --release -- -O binary yuki.bin
for the right board add --features right
to flash enter dfu by holding BOOT clicking RESET and releasing BOOT and enter:
dfu-util -d 0483:df11 -a 0 --dfuse-address 0x08000000:leave -D yuki.bin"
After that to enter dfu just hold button 05 and 33 click reset and release the buttons.