HamsterBear is a Embedded linux develop board based on Allwinner Tech F1C200s SoC
The website of this project:
https://embeddedboys.github.io/HamsterBear/
-
SoC: F1C200s arm926ejs -
DDR: 64MB on chip -
Disk: Nand Flash or TF card -
USB OTG: MiniUSB -
GPIO Expand: TCA9536 -
FPC Interface: CSI TFT -
Header: PE0-11 PA0-3 -
M2 NGFF: 67Pins M-KEY
-
USB OTG or USB HUB: The F1C200s only have one group of USB signal, so need a jumper to determine OTG or HUB is used-
USB OTG: a MicroUSB interface -
USB HUB: FE1.1s with eeprom
-
-
Wireless: RTL8188EUS (only can be used when HUB is enabled) -
3 USB: USB Type-A interface (only can be used when HUB is enabled) -
Display: 1.69 inch TFT ST7789V 280x240 -
RTC: DS1307 -
Audio: PJ-327A -
Keys: ADC key tablet -
GPIO Expand: PCA9536 -
2 UART: Header -
2 I2C: Header -
1 SDIO: Header -
1 SPI: Header
-
U-Boot:- a bsp uboot can boot from SDcard
- a mainline uboot boot from nand flash
-
Kernel: mainline v5.17.0 -
Buildroot: mainline v2022.2- directfb
- X server
- Qt5
- GTK
- Python3.10
- etc
The network connection can be used like:
-
USB Network Share (g_ether)
-
Wireless RTL8188EUS on base board
For more helpful information, check offical website and README files.