Easier to change LEDs

- For building for boards with different LEDs and configurations - Define mode for LED - Update GPIO macros for port C - Use macros to generate bits for registers
erichelgeson · Feb 10, 2024 · 47179c5 · 47179c5
1 parent 59c8583
commit 47179c5
Show file tree

Hide file tree

Showing 2 changed files with 19 additions and 9 deletions.
diff --git a/src/BlueSCSI.cpp b/src/BlueSCSI.cpp
@@ -442,8 +442,8 @@ void setup()
 #endif
 
   // PIN initialization
-  gpio_mode(LED2, GPIO_OUTPUT_PP);
-  gpio_mode(LED, GPIO_OUTPUT_OD);
+  gpio_mode(LED2, LED2_MODE);
+  gpio_mode(LED, LED_MODE);
 
   // Image Set Select Init
   gpio_mode(IMAGE_SELECT1, GPIO_INPUT_PU);

diff --git a/src/BlueSCSI.h b/src/BlueSCSI.h
@@ -99,8 +99,6 @@ enum SCSI_DEVICE_TYPE
 #define IO        PB7      // SCSI:I/O
 
 #define SD_CS     PA4      // SDCARD:CS
-#define LED       PC13     // LED
-#define LED2      PA0      // External LED
 
 // Image Set Selector
 #ifdef XCVR
@@ -116,17 +114,29 @@ enum SCSI_DEVICE_TYPE
 #define PBREG GPIOB->regs
 #define PCREG GPIOC->regs
 
-// LED control
-#define LED_ON()  PCREG->BSRR = 0b00100000000000000000000000000000; PAREG->BSRR = 0b00000000000000000000000000000001;
-#define LED_OFF() PCREG->BSRR = 0b00000000000000000010000000000000; PAREG->BSRR = 0b00000000000000010000000000000000;
-
 // Virtual pin (Arduio compatibility is slow, so make it MCU-dependent)
 #define PA(BIT)       (BIT)
 #define PB(BIT)       (BIT+16)
+#define PC(BIT)       (BIT+32)
+
 // Virtual pin decoding
-#define GPIOREG(VPIN)    ((VPIN)>=16?PBREG:PAREG)
+#define GPIOREG(VPIN)    ((VPIN)>=16?((VPIN)>=32?PCREG:PBREG):PAREG)
 #define BITMASK(VPIN) (1<<((VPIN)&15))
 
+// Built-in LED
+#define LED       PC13
+#define vLED      PC(13)
+#define LED_MODE  GPIO_OUTPUT_OD
+
+// External LED
+#define LED2      PA0
+#define vLED2     PA(0)
+#define LED2_MODE GPIO_OUTPUT_PP
+
+// LED control
+#define LED_ON() GPIOREG(vLED)->BSRR = BITMASK(vLED) << (LED_MODE == GPIO_OUTPUT_PP ? 0 : 16); GPIOREG(vLED2)->BSRR = BITMASK(vLED2) << (LED2_MODE == GPIO_OUTPUT_PP ? 0 : 16);
+#define LED_OFF() GPIOREG(vLED)->BSRR = BITMASK(vLED) << (LED_MODE == GPIO_OUTPUT_PP ? 16 : 0); GPIOREG(vLED2)->BSRR = BITMASK(vLED2) << (LED2_MODE == GPIO_OUTPUT_PP ? 16 : 0);
+
 #define vATN       PA(8)      // SCSI:ATN
 #define vBSY       PA(9)      // SCSI:BSY
 #define vACK       PA(10)     // SCSI:ACK