bbb-install.sh is a BASH shell script that automates the step-by-step instructions for installing and configuring a BigBlueButton server.
Depending on the speed of your server and its network, bbb-install.sh can have your BigBlueButton server ready for use in about 15 minutes.
For example, want to install BigBlueButton 2.2-beta on a Ubuntu 16.04 64-bit server with a public IP address, SSH into your server and run the following command as root:
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-220-beta
(If you want to install BigBlueButton 2.0, substitute -v xenial-200.
This command will download and run bbb-install.sh which, in turn, reads the -v xenial-220-beta to install BigBlueButton 2.2-beta and configure it using the server's public IP address.
Note: If your server is behind firewall -- such as behind a corporate firewall or behind an AWS Security Group -- you will need to manually configure the firewall to forward specific internet connections to the BigBlueButton server before you can access it.
When the install will finish and you'll see a message that gives a URL to test your newly setup BigBlueButton server.
# Warning: The API demos are installed and accessible from:
#
# http://xxx.xxx.xxx.xxx/demo/demo1.jsp
#
# These API demos allow anyone to access your server without authentication
# to create/manage meetings and recordings. They are for testing purposes only.
# If you are running a production system, remove them by running:
#
# sudo apt-get purge bbb-demo
Since the default installation configures BigBlueButton using the server's external IP address, and not with hostname + transport level security (TLS) or secure socket layer (SSL) certificate, you won't be able to use WebRTC as browsers now require a TLS/SSL certificate.
When you open the URL, you should see a login to join the meeting Demo Meeting.
Enter your name and click Join. The BigBlueButton client should load and prompt you to join the audio.
While this server is good for testing, to setup a server for production, you really want to have the server using a hostname and TLS/SSL certificate. Fortunately, thanks to the excellent service provided by Let's Encrypt, bbb-install.sh can automatically setup a TLS/SSL cerficiate for you given a hostname and e-mail address.
The sections below show how to do all this using a single bbb-install.sh command.
Before running bbb-install.sh, we strongly recommend that you
- read through these docs,
- ensure your server meets the minimal server requirements, and
- setup a fully qualified domain name (FQDN), such as
bbb.example.com, that resolves to the external IP address of your server.
To setup a FQDN, you need to purchase a domain name from a domain name system (DNS) provider, such as GoDaddy or Network Solutions, and use their tools to setup a FQDN (such as bbb.example.com that points to the public IP address of your server. More specifically, you need to create an A Record that points to the public IP address. Check the documentation of your DNS provider for details on how to do this.
With a FQDN domain name place, you can pass a few additional parameters to bbb-install.sh to have it
- a 4096 bit TLS/SSL certificate from Let's Encrypt (we love Let's Encrypt),
- the latest build of the HTML5 client, and
- the Green Light front-end to enable users to create accounts and manage rooms (optimal).
Most importanly, when your server is configured with an TLS/SSL certificate, your users can use Chrome, Safari, and Edge to launch the BigBlueButton client and share their audio and video using WebRTC. We recommend Chrome and FireFox as the default browsers (they have the best support for WebRTC).
The full source code for bbb-install.sh is here. To make it easy for anyone to run the script with a single command, we host the latest version of the script at https://ubuntu.bigbluebutton.org/bbb-install.sh.
There are many hosting companies that will provide you both virtual and dedicated serversl. We list a few popular choices below. Note: we are not making any recommendations here, just listing some of the popular choices.
For quick setup, Digital Ocean offers both virtual servers with Ubuntu 16.04 64-bit and a single public IP address (no firewall). Hetzner offers dedicated servers with single IP addres.
Other companies, such as ScaleWay (choose either Bare Metal or Pro servers) and Google Compute Engine offer servers that are setup behind network address translation (NAT). That is, they have both an internal and external IP address. When installing on these servers, the bbb-install.sh will detect the internal/external addresses and configure BigBlueButton accordingly.
Another populare choice is Amazon Elastic Compute Cloud. We recommend a c5.xlarge (or larger) instance. All EC2 servers are, by default, is behind a firewall (which Amazon calls a security group). You will need to manually configure he security group before installing BigBlueButton (we provide steps in the next section).
Finally, if bbb-install.sh is unable to configure your server behind NAT, we recommend going through the step-by-step for installing BigBlueButton. (Going through the steps is also a good way to understand more about how BigBlueButton works).
If you want to install BigBlueButton 2.0 on a server behind a firewall, such an Amazon's EC2 instance, you first need to configure the firewall to forward incoming traffic on the following ports:
- TCP/IP port 22 (for SSH)
- TCP/IP ports 80/443 (for HTTP/HTTPS)
- TCP/IP port 1935 (for RTMP)
- UDP ports in the range 16384 - 32768 (for FreeSWITCH/HTML5 client RTP streams)
Amazon calls the firewall for EC2 a 'security group'. Here's a screen shot how the EC2 security group configuration should look after configuring it to forward incoming traffic on the above ports:
If you are using EC2, you need to assign your server an Elastic IP address to prevent it from getting a new IP address on reboot.
Using Digital Ocean as an example, put together this video to get you going quickly: Using bbb-install.sh to setup BigBlueButton 2.0 on Digital Ocean.
Using Amazon EC2, see Install using bbb-install.sh on EC2.
You can get help by passing the -h option.
$ wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -h
Installer script for setting up a BigBlueButton 2.0 server.
This script also supports installation of a separate coturn (TURN) server on a separate server.
USAGE:
bbb-install.sh [OPTIONS]
OPTIONS (install BigBlueButton):
-v <version> Install given version of BigBlueButton (e.g. 'xenial-220-betaa') (required)
-s <hostname> Configure server with <hostname>
-e <email> Email for Let's Encrypt certbot
-c <hostname>:<secret> Configure with coturn server at <hostname> using <secret>
-t Install HTML5 client (currently under development)
-g Install GreenLight
-p <host> Use apt-get proxy at <host>
-h Print help
OPTIONS (install coturn):
-c <hostname>:<secret> Configure coturn with <hostname> and <secret> (required)
-e <email> E-mail for Let's Encrypt certbot (required)
EXAMPLES
Setup a BigBlueButton server
./bbb-install.sh -v xenial-220-beta
./bbb-install.sh -v xenial-220-beta -s bbb.example.com -e [email protected]
./bbb-install.sh -v xenial-220-beta -s bbb.example.com -e [email protected] -t -g
./bbb-install.sh -v xenial-220-beta -s bbb.example.com -e [email protected] -t -g -c turn.example.com:1234324
Setup a coturn server
./bbb-install.sh -c turn.example.com:1234324 -e [email protected]
SUPPORT:
Source: https://github.com/bigbluebutton/bbb-install
Commnity: https://bigbluebutton.org/support
To install a BigBlueButton on a Ubuntu 16.04 64-bit with only an IP address, use the -v option for a given BigBlueButton package repository. There are two choices:
| Option | Version | Installation Steps (for reference) |
|---|---|---|
| -v xenial-220-beta | BigBlueButton 2.2-beta (pure HTML5 client) (recommended) | install steps |
| -v xenial-200 | BigBlueButton 2.0 (Flash/HTML5 client) | install steps |
To install BigBlueButton 2.2-beta:
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-220-beta
For example, to install BigBlueButton 2.0:
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-200
That's it. Regardless of which option you choose, the installation should finish in about 15 minutes (depending on the server's internet connection) with the following message:
** Potential problems described below **
......
# Warning: The API demos are installed and accessible from:
#
# http://xxx.xxx.xxx.xxx/demo/demo1.jsp
#
# These API demos allow anyone to access your server without authentication
# to create/manage meetings and recordings. They are for testing purposes only.
# If you are running a production system, remove them by running:
#
# sudo apt-get purge bbb-demo
The script also installs the bbb-demo package so you can immediately test out the install. If you want to remove the API demos, use the command
sudo apt-get purge bbb-demo
If you want to use this server with an third-party integration, such as Moodle, you can get the BigBlueButton server's hostname and shared secret with the command sudo bbb-conf --secret.
# bbb-conf --secret
URL: http://xxx.xxx.xxx.xxx/bigbluebutton/
Secret: yyy
Link to the API-Mate:
http://mconf.github.io/api-mate/#server=http://xxx.xxx.xxx.xxx/bigbluebutton/&sharedSecret=yyy
Since this default use of bbb-install.sh does not configure a SSL/TLS certificate, while you can login to the server, you won't be able to share audio/video as WebRTC requires a SSL/TLS certificate.
Before bbb-install.sh can install a SSL/TLS certificate, you will need to provide two pieces of information
- a fully qualified domain name (FQDN), such as
bbb.example.com, that resolves to the public IP address of your server, and - an e-mail address.
When you have setup the FQDN, check that it correctly resolves to the external IP address of the server using the dig command.
dig bbb.example.com @8.8.8.8
Note: we're using bbb.example.com as an example hostname, you would substitute your real hostname for the check (and for the commands below).
With just these two pieces of information -- FQDN and e-mail address -- you can use bbb-install.sh to automate the configuration of BigBlueButton server with an TLS/SSL certificate. For example, to install BigBlueButton 2.2-beta with a TLS/SSL certificate from Let's Encrypt using bbb.example.com and [email protected], enter the command
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-220-beta -s bbb.example.com -e [email protected]
(again, you would substitute bbb.example.com and [email protected] with your server's FQDN and your e-mail address).
The bbb-install.sh script will also install a cron job that automatically news the Let's Encrypt certificate so it doesn't expire. Cool.
To try out the latest of the latest build of the HTML5 client, add the -t option.
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-220-beta -s bbb.example.com -e [email protected] -t
After a few minutes, you'll have the HTML5 client installed. Use an Android (6.0+) or iOS (iOS 12.2+) mobile phone or tablet to access your BigBlueButton server. BigBlueButton detects when you are connecting from a mobile browser and automatically load the HTML5 client.
BigBlueButton will automatically launch the HTML5 client if the browser does not support Flash, such as when accessing the server using an iOS (iOS 12.2+) or Android (version 6.0+) phone or tablet. Since bbb-install.sh installs the API demos, you can force the loading of the HTML5 client by opening the URL https://<hostname>/demo/demoHTML5.jsp, entering your name, and clicking Join.
Enter your name and click Join. The HTML5 client will then load and join you into Demo Meeting.
Greenlight is a simple front-end for BigBlueButton written in Ruby on Rails. It lets users create accounts, have permanent rooms, and manage their recordings.
You can install Greenlight by adding the -g option.
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-220-beta -s bbb.example.com -e [email protected] -g
Once Greenlight is installed, accessing the FQDN of the server, such as https://bbb.example.com/, automatically opens Greenlight. You can also configure GreenLight to use OAuth2 authentication.
To launch Greenlight, simply the URL of your server, such as https://bbb.example.com/. You should see the Greenlight landing page.
If you want to setup BigBlueButton 2.2-beta (recommended) with a SSL certificate, HTML5 client, and GreenLight, you can do this with a single command.
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-220-beta -s bbb.example.com -e [email protected] -t -g
For BigBlueButton 2.0,
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-200 -s bbb.example.com -e [email protected] -t -g
For all the commands given above, you can re-run the same command later to update your server to the latest version of BigBlueButton 2.2. We announce updates to BigBlueButton to the bigbluebutton-dev mailing list.
You can use bbb-install.sh to automate the steps to setup a TURN server for BigBlueButton.
Note: This step is optional, but recommended if your BigBlueButton server is publically available on the internet and will be accessed by users who may be behind restrictive firewalls.
BigBlueButton normally requires a wide range of UDP ports to be available for WebRTC communication. In some network restricted sites or development environments, such as those behind NAT or a firewall that restricts outgoing UDP connections, users may be unable to make outgoing UDP connections to your BigBlueButton server.
The TURN protocol is designed to allow UDP-based communication flows like WebRTC to bypass NAT or firewalls by having the client connect to the TURN server, and then have the TURN server connect to the destination on their behalf.
You need a separate server (not the BigBlueButton server) to setup as a TURN server, specifically you need
- a Ubuntu 18.04 server with a public IP address
We recommend Ubuntu 18.04 as it has a later version of coturn than Ubuntu 16.04. Also, this TURN server does not need to be very powerful as it will only relay communications from the BigBlueButton client to the BigBlueButton server when necessary. A dual core server on Digital Ocean, for example, which offers servers with public IP addresses, is a good choce.
Next, to configure the TURN server you need:
- a fully qualified domain name (FQDN) with a DNS entry that resolves to the external public IP address of the TURN server,
- a e-mail addres for Let's Encrypt, and
- a secret key (it can be 8 to 16 character random string that you create).
With the above information, you can setup a TURN server for BigBlueButton using bbb-install.sh as follows
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -c <FQDN>:<SECRET> -e <EMAIL>
Note, we've omitted the -v option, which causes bbb-install.sh to just install and cofigure coturn. For example, using turn.example.com as the FQDN, 1234abcd as the shared secret, and [email protected] as the email addres, you can setup a TURN server for BigBlueButton using the command
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -c turn.example.com:1234abcd -e [email protected]
bbb-install.sh uses Let's Encrypt to configure coturn to use a SSL certificate. With a SSL certificate in place, coturn can relay access to your BigBlueButton server via TCP/IP on port 443. This means if a user is behind a restrictive firewall that blocks all outgoing UDP connections, the TURN server can accept connections from the user via TCP/IP on port 443 and relay the data to your BigBlueButton server via UDP.
With the TURN server in place, you can configure your BigBlueButton server to use the TURN server by running the bbb-install.sh command again and adding the same -c <FQDN>:<SECRET>. For example,
wget -qO- https://ubuntu.bigbluebutton.org/bbb-install.sh | bash -s -- -v xenial-220-beta -s bbb.example.com -e [email protected] -t -g -c turn.example.com:1234abcd
You can re-use a single TURN server for multiple BigBlueButton installations.
If you intend to use this server for production you should uninstall the API demos using the command
apt-get purge bbb-demo
You can also do a number of customizations to your server as well.
If on first install Greenlight gives you a 500 error when accessing it, you can restart Greenlight.
If on the initial install you see
# Not running: tomcat7 or grails LibreOffice
just run sudo bbb-conf --check again. Tomcat7 may take a bit longer to start up and isn't running when the first time you run sudo bbb-conf --check.
If you have feedback on the script, or need help using it, please post to the BigBlueButton Setup mailing list with details of the issue (and include related information such as steps to reproduce the error).
If you encounter an error with the script (such as it not completing or throwing an error), please open GitHub issue and provide steps to reproduce the issue.
If you are running your BigBlueButton behind a firewall, such as on EC2, this script will not configure your firewall. You'll need to configure the firewall manually.