=head1 INTRODUCTION

This module implements a perl5 API for the IBM MQSeries / WebSphere MQ
messaging middleware product API (often referred to as the MQI), as
well as:

=over

=item Object Oriented (OO) interface to the MQI

=item OO interface to the MQSeries administrative commands via PCF or MQSC

=item OO interface to the various configuration, log, and error files

=back

For more information on the MQSeries / WebSphere MQ product itself,
see the IBM website at: http://www.ibm.com/software/integration/wmq/

=head1 PREREQUISITES

This release requires perl5.8 or later, and a current release of the
IBM Websphere MQ (MQSeries) product installed, either V5.2 (+ high
CSD), V5.3, V6.0, V7.0 or 7.1.

=head1 PLATFORMS

This package has been known to build with the following combinations
of software.  Those marked with an asterix (*) are platforms the
maintainers can not test personally, so there is a remote possibility
that there may be new bugs in these platforms.  Please report problems
to the maintainers.

  Operating System        MQSeries Version        Perl Version
  ================        ================        ============
  SunOS 5.7               5.2                     5.8
  SunOS 5.7               5.3                     Same as SunOS 5.7 / MQ 5.2
  SunOS 5.8               5.2                     Same as SunOS 5.7 / MQ 5.2
  SunOS 5.8               5.3                     Same as SunOS 5.7 / MQ 5.2
 *SunOS 5.8               6.0                     5.8
  SunOS 5.9               5.3                     Same as SunOS 5.7 / MQ 5.2
 *SunOS 5.8               7.0                     5.10
 *SunOS 5.10              7.1                     5.10
 *AIX 5.1L                6.0                     5.8
 *AIX 5.3                 6.0.2                   5.8
  Red Hat AS 3.0 / ia32   5.3                     5.8
  Red Hat EL 4 / ia32     5.3                     5.8
  Red Hat EL 4 / ia32     6.0                     5.8
  Red Hat EL 4 / ia32     7.0                     5.8
  Red Hat EL 4 / x86_64   6.0                     5.8
  Red Hat EL 4 / x86_64   7.0                     5.8
  Red Hat EL 5 / x86_64   6.0.2                   5.8
  Red Hat EL 5 / x86_64   7.0                     5.8
  Red Hat EL 5 / x86_64   7.1                     5.8
 *HP-UX 11.31 Itanium     7.0			  5.8.9
 *Windows XP SP2          5.3                     Active Perl 5.8.8
 *Windows XP SP2          6.0                     Active Perl 5.8.8
 *Windows Server 2003     5.3                     Active Perl 5.8.8
 *Windows Server 2003     6.0                     Active Perl 5.8.8

If you succeed in making this work on any other platform, please send
the changes (in the form of a context diff) to the authors, so we can
integrate them.

=head1 INSTALLATION

This module installs much like anything else available on CPAN.

  perl Makefile.PL
  make
  make test
  make install

On Windows with Visual C++ 8.0, you may need to configure a manifest
file.  See README.windows for more details.

Before building the module, you need to edit the CONFIG file and
change, minimally, the name of the queue manager against which the
tests will run.  The rest of the defaults should be reasonable, but
you will have to customize this file to match your local environment.
The CONFIG file has comments which document each of the parameters, so
go read it for more information.

On some platforms (notably Linux and HP-UX), you need to link to
different libraries depending on whether your perl has been set up to
run multi-theaded or not.  The MQClient/Makefile.PL script tries to
figure this out automatically; if you run into issues, patches to that
script will be welcome.

You will obviously need to create the queue used for the test suite on
the queue manager you specified in the CONFIG file.

NOTE: If you do not support client channel table files, then you may
have to set the MQSERVER environment variable in order to allow the
client tests to work.

Any failure in the test suite should a cause for concern.  In order to
get more details from it, run it via:

  make test TEST_VERBOSE=1

If you can't figure out what broke, then send the author the output
from "perl -V", as well as the output from the verbose test run.
Please include as many details as possible about the operating system
and MQSeries software on both the host being used to compile this
extension, as well as the queue manager to which the test suite is
connecting.

The most common problem with this module is failure to connect to the
queue manager.  Before submitting a bug report for the
MQClient::MQSeries modules, make sure the IBM-supplied sample
utilities C<amqsgetc> and C<amqsputc> work.

=head1 RELEASE NOTES

The Changes.html file has a complete, historical list of all
user-visible (and some invisible) changes to this code.

=head1 WARNINGS REGARDING WMQ V6 PCF SUPPORT

You should be warned this release does not contain support for every new
PCF command made available in V6. The following are not supported in this
release:

Inquire Archive
Inquire ChannelInitiator
Inquire EntityAuthority
Inquire Group
Inquire Log
Inquire System
Move Queue
Refresh QueueManager
Reset QueueManager
Resume QueueManager
Set Archive
Set Log
Set System
Stop ChannelInitiator
Suspend QueueManager

You should be warned not all new PCF commands which are supported in
this release have been throughly tested by the maintainers. New PCF commands
which have been throughly tested include:

Change/Copy/Create/Inquire/Delete/Stop ChannelListener
Change/Copy/Create/Inquire/Delete/Start/Stop Service
Inquire ChannelListenerStatus
Inquire QueueManagerStatus
Inquire ServiceStatus

Though we believe the rest to work just fine.

You should be warned 'filtering' is not supported in this release. You will
not be able to specify parameters such as 'IntegerFilterCommand',
'StringFilterCommand' or 'ByteStringFilterCommand' for those objects
where filtering has been made available.

=head1 DOCUMENTATION

The documentation will be installed as man pages by default, but the
location of them depends entirely on how you have perl built and
installed.  Watch the installation, and you will see where they get
installed.  Prepend that to your MANPATH environment variable, and
then, all of these man commands will work.

Personally, the author prefers the results of "pod2html", but the
perl5 Makefile.PL infrastructure won't do this for you automatically.

  man MQSeries

will provide the documentation for the core MQI interface, and,

  man MQSeries::QueueManager
  man MQSeries::Queue
  man MQSeries::Message

will provide the core documentation for the OO interface.

The following man pages document the classes that handle various
special MQSeries message types:

  man MQSeries::Message::Event
  man MQSeries::Message::Storable
  man MQSeries::Message::PCF
  man MQSeries::Message::DeadLetter

There is an OO interface to the Command Server:

  man MQSeries::Command
  man MQSeries::Command::Request
  man MQSeries::Command::Response

A number of utility classes have been created for parsing the various
file formats used by the MQSeries product:

  man MQSeries::Config::ChannelTable
  man MQSeries::Config::Machine
  man MQSeries::Config::QMgr
  man MQSeries::ErrorLog::Parser
  man MQSeries::ErrorLog::Tail
  man MQSeries::ErrorLog::Entry
  man MQSeries::FDC::Parser
  man MQSeries::FDC::Tail
  man MQSeries::FDC::Entry

=head1 AUTHORS

The code is currently maintained and supported by:

  MQ Engineering Group <[email protected]>

Most of the previous development, maintenance and support work was
done by:

  Hildo Biersma
  W. Phillip Moore

We also have to give credit to:

  Brian T. Shelden <[email protected]>

for his help in porting and testing the code.

This module was originally developed as an IBM SupportPac, so credit
must also go to the original author:

  David J. Lennon <[email protected]>

Although, nothing remains of the original code.... (sorry, David :-)

=cut

#
# $Id: README,v 33.6 2012/09/26 16:15:20 jettisu Exp $
#
# Copyright (c) 1999-2012 Morgan Stanley & Co. Incorporated
# See ..../src/LICENSE for terms of distribution.
#