-
Notifications
You must be signed in to change notification settings - Fork 118
Device Commands
gtxaspec edited this page Jul 14, 2023
·
6 revisions
Edit the wz_mini.conf file using nano directly.
wz_mini_edit.sh
welcome to: cmd <arg>
arg can be:
jpeg <channel> <-n>
Note: -n denotes no header
video <channel> <on/off>
audio <channel> <on/off>
move <x> <y>
waitMotion <timeout> (you must enable motion tagging in the app first)
irled <on/off>
aplay <file path> <volume 1-100>
curlDebug on, off, disable_video
mp4write <on/off> (t31 only)
timelapse <file> <interval> <count>
Only available when RTSP server is enabled, values are reset to default upon reboot. Tune various audio and video parameters supported by IMP.
cmd imp_control <command> <value>
| function name | Value | Description |
|---|---|---|
| AUDIO | ||
| agc_on | Enable Automatic Gain Control | |
| agc_off | Disable Automatic Gain Control | |
| hpf_on | Enable High Pass Filter | |
| hpf_off | Disable High Pass Filter | |
| ns_on | Enable Noise Supression | |
| ns_off | Disable Noise Supression | |
| aec_on | Enable Automatic Echo Cancellation | |
| aec_off | Disable Automatic Echo Cancellation | |
| ai_vol | -30 to 120 | Audio Input Volume |
| ai_gain | 0 to 31 | Audio Input Gain |
| alc_gain | 0 to 7 | Automatic Level Control Gain |
| ao_gain | 0 to 31 | Audio Output Gain |
| ao_vol | -30 to 120 | Audio Output Volume |
| ------------- | ------------- | ----------- |
| VIDEO | ||
| flip_mirror | Mirror Image | |
| flip_vertical | Flip Vertical | |
| flip_horizontal | Flip Horizontal | |
| flip_normal | Normal Image | |
| tune_contrast | -128 to 128 | Contrast Control |
| tune_brightness | -128 to 128 | Brightness Control |
| tune_sharpness | -128 to 128 | Sharpness Control |
| tune_saturation | -128 to 128 | Saturation Control |
| tune_aecomp | 0 to 255 | Auto Exposure Target |
| tune_aeitmax | 0 to 10000 | Auto Exposure Maxiumum (no v2) |
| tune_dpc_strength | -128 to 128 | DPC Strength (no v2) |
| tune_drc_strength | -128 to 128 | DRC Strength (no v2) |
| tune_hilightdepress | 0 to 10 | Glare Supression |
| tune_temper | -128 to 128 | 3D Noise reduction strength |
| tune_sinter | -128 to 128 | 2D Noise reduction strength |
| tune_again | 0 to 99999 | Set sensor A-Gain maximum |
| tune_dgain | see notes | Maximum D-Gain set by the ISP |
| tune_backlightcomp | -1 to 3500 | Backlight Compensation? (undocumented, no v2) |
| tune_dps | 50 to 150 | Set DPC intensity (v2 only) |
tune_dgain: 0 means 1x, 32 means 2x, and so on
Control the wyze car using the command line
car_control.sh
=== CAR CONTROL over COMMAND LINE! ===
CAR: car_control.sh
CAR: car_control.sh constant
CAR: car_control.sh constant low_speed
CAR: car_control.sh low_speed
CAR: w: forward
CAR: d: reverse
CAR: a: turn wheel left
CAR: d: turn wheel right
CAR: q: forward left
CAR: e: forward right
CAR: z: reverse left
CAR: c: reverse right
CAR: x: all stop
CAR: h: headlight on/off
CAR: j: irled on/off
CAR: b: honk
CAR: 1: quit ASAP!
Control the camera spotlight add-on using the command line
spotlight_ctl.sh
usage: spotlight_ctl on_high
usage: spotlight_ctl on_low
usage: spotlight_ctl off