Modeling and Control of Morphing Covers for the Adaptive Morphology of Humanoid Robots

F. Bergonti, G. Nava, L. Fiorio, G. L'Erario, D. Pucci "Modeling and Control of Morphing Covers for the Adaptive Morphology of Humanoid Robots" in Paper Name, vol. 1, no. 1, pp. 1-6, Month Year, doi: 10.1093/ajae/aaq063

Modeling_and_Control_of_Morphing_Covers_for_the_Adaptive_Morphology_of_Humanoid_Robots.mp4

IEEE Transactions on Robotics

Installation | Paper | Video

Abstract

This paper takes a step to provide humanoid robots with adaptive morphology abilities. We present a systematic approach for enabling robotic covers to morph their shape, with an overall size fitting the anthropometric dimensions of a humanoid robot. More precisely, we present a cover concept consisting of two main components: a skeleton, which is a repetition of a basic element called node; a soft membrane, which encloses the cover and deforms with its motion. The paper focuses on the cover skeleton, and addresses the challenging problems of: node design; system modeling; motor positioning; and control design of the morphing system. The cover modeling focuses on kinematics, and a systematic approach for defining the system kinematic constraints is presented. Then, we apply genetic algorithms to find the motor locations so as the morphing cover is fully actuated. Finally, we present control algorithms that allow the cover to morph into a time varying shape. The entire approach is validated by performing kinematic simulations with four different covers of square dimensions and having 3x3, 4x8, 8x8, and 20x20 nodes, respectively. For each cover, we apply the genetic algorithms to choose the motor locations and perform simulations for tracking a desired shape. The simulation results show that the presented approach ensures the covers to track a desired shape with good tracking performances.

Installation

1. Clone this repository and mystica:

git clone https://github.com/ami-iit/paper_bergonti_2022_tro_kinematics-control-morphingcovers.git
git clone https://github.com/ami-iit/mystica.git

mystica is a matlab library to simulate the kinematics and dynamics of multibody systems.

2. Run in matlab the function install() stored in mystica:

install('env_name','imorph')

The function install() downloads mambaforge. mambaforge is a package manager that downloads and configures our dependencies in conda enviroment called imorph.

Usage

This repository stores:

• the algorithm for evaluating an optimal motor positioning for structures with closed kinematic loops (see Sec.IV of the paper);
• the instantaneous controller that evaluates motors speed to make the cover skeleton moves toward the desired shape (see Sec.V of the paper);
• the scripts for reproducing the simulations described in Sec.VI of the paper.

Reproducing simulations results

1. If you have completed the installation procedure successfully, a file setup.m is generated in mystica\deps. You have to open Matlab and run the script setup.m to configure MATLABPATH.

2. Run one of the four scripts stored in this folder. For example, to reproduce the result of the first scenario you have to run:

cd paper_bergonti_2022_tro_kinematics-control-morphingcovers
cd scripts
run('sim1')

If you open the script, you can modify the config.simulation_with_noise parameter deciding whether to apply noise. Instead, the parameter config.run_only_controller allows you to choose if you want to run only the controller without evaluating a new motor placement.

#	mesh	script	result
1	3x3	sim1.m
2	8x8	sim2.m
3	20x20	sim3.m
4	4x8	sim4.m

Citing this work

If you find the work useful, please consider citing:

@ARTICLE{ajae/aaq063,
  author={Author1, Alfred and Author2, Beatrice},
  journal={Journal},
  title={Paper Tile},
  year={2021},
  volume={1},
  number={1},
  pages={1-6},
  doi={10.1093/ajae/aaq063}}

Maintainer

This repository is maintained by:

	@FabioBergonti