Releases: lupyuen/nuttx-sg2000
Releases · lupyuen/nuttx-sg2000
nuttx-sg2000-2024-08-18
Test OK
----- Download the latest NuttX build for 2024-08-18
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/daa3168cfb1fdd09cd43249c15a30cfd9463a954
NuttX Apps: https://github.com/apache/nuttx-apps/tree/12012f22760f5a53fc8881e9c3eb703021731d80
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15788632 Aug 18 03:11 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - ce:d1:33:64:e5:89
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete... done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.181 (564 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.181
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15788632 (f0ea58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.181
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.2 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 daa3168cfb Aug 18 2024 00:14:44 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has no value
show_variable: Variable=Variable3 has no value
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 3 2
mxordblk 7cff0 7cff0
uordblks 2658 2578
fordblks 7e9a0 7ea80
user_main: setvbuf test
setvbuf_test: Test NO buffering
setvbuf_test: Using NO buffering
setvbuf_test: Test default FULL buffering
set...
nuttx-sg2000-2024-08-17
Test OK
----- Download the latest NuttX build for 2024-08-17
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/cd1f8f1fea16d9a11411c9c8645fc6567a3044f1
NuttX Apps: https://github.com/apache/nuttx-apps/tree/f841ca16ebd181346abc612d2e1bb9e2f0bb4f41
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15788632 Aug 17 02:00 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - d6:55:62:7e:69:ec
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.57 (545 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.57
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15788632 (f0ea58 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.57
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.2 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 cd1f8f1fea Aug 17 2024 00:13:21 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1 ha...
nuttx-sg2000-2024-08-16
Test OK
----- Download the latest NuttX build for 2024-08-16
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/b64fb09e6c688fcb94877048e99dbc2173d24c3b
NuttX Apps: https://github.com/apache/nuttx-apps/tree/bcf655e196911c50034dc2cbc78401960f09a796
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15783512 Aug 16 01:34 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - c2:e1:fc:ec:c5:53
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.150 (343 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.150
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15783512 (f0d658 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.150
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.1 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 b64fb09e6c Aug 16 2024 00:13:48 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1 has no value
show_variable: Variable=...
nuttx-sg2000-2024-08-15
Test OK
----- Download the latest NuttX build for 2024-08-15
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/f05c85e6228a7c6f2471da33e09fa1e8e0dc07e9
NuttX Apps: https://github.com/apache/nuttx-apps/tree/1fdf13478f75ad93191d5046f66d86d1f4ab70f7
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15783512 Aug 15 01:16 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - 4e:2a:f2:e2:4e:78
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.193 (566 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.193
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15783512 (f0d658 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.193
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.2 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 f05c85e622 Aug 15 2024 00:13:51 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17642 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1...
nuttx-sg2000-2024-08-14
Test OK
----- Download the latest NuttX build for 2024-08-14
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/af10e1b470571e16807f00b0702119e36b109410
NuttX Apps: https://github.com/apache/nuttx-apps/tree/1fdf13478f75ad93191d5046f66d86d1f4ab70f7
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15783512 Aug 14 01:22 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - b2:2b:0a:04:7d:89
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.39 (579 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.39
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15783512 (f0d658 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.39
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.2 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 af10e1b470 Aug 14 2024 00:13:43 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1 ha...
nuttx-sg2000-2024-08-13
Test OK
----- Download the latest NuttX build for 2024-08-13
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/155517b5fc8c69da94767ed62b686a46edc19817
NuttX Apps: https://github.com/apache/nuttx-apps/tree/1fdf13478f75ad93191d5046f66d86d1f4ab70f7
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15783512 Aug 13 01:19 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - 96:d8:60:19:e1:19
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.110 (562 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.110
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15783512 (f0d658 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.110
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.2 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 155517b5fc Aug 13 2024 00:14:15 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1 has no value
show_variable: Variable=...
nuttx-sg2000-2024-08-12
Test OK
----- Download the latest NuttX build for 2024-08-12
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/2ff2b8243773df3a56d535635b898a06f3f8c0f6
NuttX Apps: https://github.com/apache/nuttx-apps/tree/1fdf13478f75ad93191d5046f66d86d1f4ab70f7
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15783512 Aug 12 01:25 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
PBS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - 46:25:aa:05:d8:3d
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.56 (425 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.56
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15783512 (f0d658 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.56
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.2 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 2ff2b82437 Aug 12 2024 00:14:17 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1 has no value
show_variable: Variable...
nuttx-sg2000-2024-08-11
Test OK
----- Download the latest NuttX build for 2024-08-11
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/af78534df9a1c1b9a0a5c8519d90856c975560f5
NuttX Apps: https://github.com/apache/nuttx-apps/tree/0797ee231254630c96111afba7997e83e106c244
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15783512 Aug 11 01:32 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
�SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - c2:1b:1f:f3:21:6d
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.6 (537 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.6
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15783512 (f0d658 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.6
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.1 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 af78534df9 Aug 11 2024 00:15:15 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1 has no value
...
nuttx-sg2000-2024-08-10
Test OK
----- Download the latest NuttX build for 2024-08-10
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/cde0de00fe40484ed75cb80e3050b511a8b5c41a
NuttX Apps: https://github.com/apache/nuttx-apps/tree/e46347ec1bb7df1b2cf038fffc88a869f0b15de1
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15783512 Aug 10 01:23 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
LSD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - f2:47:fd:3a:28:79
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete... done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.238 (564 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.238
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15783512 (f0d658 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.238
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.2 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 cde0de00fe Aug 10 2024 00:13:35 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17643 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has no value
show_variable: Variable=Variable3 has no value
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 3 2
mxordblk 7cff0 7cff0
uordblks 2658 2578
fordblks 7e9a0 7ea80
user_main: setvbuf test
setvbuf_test: Test NO buffering
setvbuf_test: Using NO buffering
setvbuf_test: Test default FULL buffering
se...
nuttx-sg2000-2024-08-09
Test OK
----- Download the latest NuttX build for 2024-08-09
/tmp ~
Archive: nuttx.zip
inflating: nuttx
inflating: nuttx-export-12.6.0-RC1.tar.gz
inflating: nuttx.S
inflating: nuttx.bin
inflating: nuttx.config
inflating: nuttx.hash
inflating: nuttx.hex
inflating: nuttx.manifest
inflating: nuttx.map
inflating: initrd
inflating: init.S
inflating: hello.S
inflating: Image
inflating: System.map
~
NuttX Source: https://github.com/apache/nuttx/tree/01bac59cb70d4139371e541c4f991899ad77349c
NuttX Apps: https://github.com/apache/nuttx-apps/tree/e46347ec1bb7df1b2cf038fffc88a869f0b15de1
----- Copy NuttX Image to TFTP Server
-rw-r--r-- 1 pi pi 15783512 Aug 9 01:19 /tftpboot/Image-sg2000
----- Close the screen session
spawn screen -x
----- Power Off the SBC
[]----- Power On the SBC
[]----- Run the Automated Test
spawn screen /dev/tty.usbserial-0001 115200
BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x8200/0x8200/0.BE.J.
FSBL Jb2829:gbeb1483-dirty:2024-05-07T08:13:20+00:00
st_on_reason=d0000
st_off_reason=0
P2S/0x1000/0xc00a200.
SD/0x9200/0x1000/0x1000/0.P2E.
DPS/0xa200/0x2000.
SD/0xa200/0x2000/0x2000/0.DPE.
DDR init.
ddr_param[0]=0x78075562.
pkg_type=1
D2_4_1
DDR3-4G-BGA
Data rate=1866.
DDR BIST PASS
PLLS/OD.
C2S/0xc200/0x9fe00000/0x200.
SD/0xc200/0x200/0x200/0.RSC.
C2E.
MS/0xc400/0x80000000/0x1b000.
SD/0xc400/0x1b000/0x1b000/0.ME.
L2/0x27400.
SD/0x27400/0x200/0x200/0.L2/0x414d3342/0xcafe170c/0x80200000/0x37e00/0x37e00
COMP/1.
SD/0x27400/0x37e00/0x37e00/0.DCP/0x80200020/0x1000000/0x81900020/0x37e00/1.
DCP/0x75aa0/0.
Loader_2nd loaded.
Switch RTC mode to xtal32k
Jump to monitor at 0x80000000.
OPENSBI: next_addr=0x80200020 arg1=0x80080000
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : Milk-V DuoS
Platform Features : mfdeleg
Platform HART Count : 1
Platform IPI Device : clint
Platform Timer Device : clint
Platform Console Device : uart8250
Platform HSM Device : ---
Platform SysReset Device : ---
Firmware Base : 0x80000000
Firmware Size : 132 KB
Runtime SBI Version : 0.3
Domain0 Name : root
Domain0 Boot HART : 0
Domain0 HARTs : 0*
Domain0 Region00 : 0x0000000074000000-0x000000007400ffff (I)
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff ()
Domain0 Region02 : 0x0000000000000000-0xffffffffffffffff (R,W,X)
Domain0 Next Address : 0x0000000080200020
Domain0 Next Arg1 : 0x0000000080080000
Domain0 Next Mode : S-mode
Domain0 SysReset : yes
Boot HART ID : 0
Boot HART Domain : root
Boot HART ISA : rv64imafdcvsux
Boot HART Features : scounteren,mcounteren,time
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4096
Boot HART PMP Address Bits: 38
Boot HART MHPM Count : 8
Boot HART MHPM Count : 8
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
U-Boot 2021.10-ga57aa1f2-dirty (May 07 2024 - 08:13:12 +0000) cvitek_cv181x
DRAM: 510 MiB
gd->relocaddr=0x9fbc6000. offset=0x1f9c6000
set_rtc_register_for_power
MMC: cv-sd@4310000: 0, wifi-sd@4320000: 1
Loading Environment from FAT... mmc1 : finished tuning, code:53
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@4070000 (eth0) using random MAC address - aa:ef:9e:98:f1:f3
eth0: ethernet@4070000
Hit any key to stop autoboot: 1 0
ethernet@4070000 Waiting for PHY auto negotiation to complete.. done
Speed: 100, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
*** Unhandled DHCP Option in OFFER/ACK: 43
*** Unhandled DHCP Option in OFFER/ACK: 43
DHCP client bound to address 192.168.31.232 (543 ms)
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.232
Filename 'Image-sg2000'.
Load address: 0x80200000
Loading: * #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################
1.2 MiB/s
done
Bytes transferred = 15783512 (f0d658 hex)
Speed: 100, full duplex
Using ethernet@4070000 device
TFTP from server 192.168.31.10; our IP address is 192.168.31.232
Filename 'cv181x_milkv_duos_sd.dtb'.
Load address: 0x81200000
Loading: * ##
1.2 MiB/s
done
Bytes transferred = 21575 (5447 hex)
## Flattened Device Tree blob at 81200000
Booting using the fdt blob at 0x81200000
Loading Device Tree to 000000009f275000, end 000000009f27d446 ... OK
Starting kernel ...
ABC
NuttShell (NSH) NuttX-12.6.0-RC1
nsh> uname -a
NuttX 12.6.0-RC1 01bac59cb7 Aug 9 2024 00:13:33 risc-v milkv_duos
nsh> free
total used free maxused maxfree nused nfree
Kmem: 2061304 10600 2050704 35952 2050256 35 3
Page: 20971520 647168 20324352 20324352
nsh> ls -l /dev
/dev:
crw-rw-rw- 0 console
crw-rw-rw- 0 null
brw-rw-rw- 16777216 ram0
crw-rw-rw- 0 ttyS0
crw-rw-rw- 0 zero
nsh> ps
PID GROUP PRI POLICY TYPE NPX STATE EVENT SIGMASK STACK USED FILLED COMMAND
0 0 0 FIFO Kthread - Ready 0000000000000000 003056 001040 34.0% Idle_Task
1 0 100 RR Kthread - Waiting Semaphore 0000000000000000 001968 000720 36.5% lpwork 0x804021c8 0x804021f0
3 3 100 RR Task - Running 0000000000000000 003008 001536 51.0% /system/bin/init
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> hello
Hello, World!!
nsh> getprime
Set thread priority to 10
Set thread policy to SCHED_RR
Start thread #0
thread #0 started, looking for primes < 10000, doing 10 run(s)
thread #0 finished, found 1230 primes, last one was 9973
Done
getprime took 17644 msec
nsh> ostest
stdio_test: write fd=1
stdio_test: Standard I/O Check: printf
stdio_test: write fd=2
stdio_test: Standard I/O Check: fprintf to stderr
ostest_main: putenv(Variable1=BadValue3)
ostest_main: setenv(Variable1, GoodValue1, TRUE)
ostest_main: setenv(Variable2, BadValue1, FALSE)
ostest_main: setenv(Variable2, GoodValue2, TRUE)
ostest_main: setenv(Variable3, GoodValue3, FALSE)
ostest_main: setenv(Variable3, BadValue2, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
ostest_main: Started user_main at PID=11
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="user_main"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: getopt() test
getopt(): Simple test
getopt(): Invalid argument
getopt(): Missing optional argument
getopt_long(): Simple test
getopt_long(): No short options
getopt_long(): Argument for --option=argument
getopt_long(): Invalid long option
getopt_long(): Mixed long and short options
getopt_long(): Invalid short option
getopt_long(): Missing optional arguments
getopt_long_only(): Mixed long and short options
getopt_long_only(): Single hyphen long options
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
user_main: libc tests
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 2
mxordblk 7cff0 7cff0
uordblks 2678 2678
fordblks 7e980 7e980
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 80ff8 80ff8
ordblks 2 3
mxordblk 7cff0 7cff0
uordblks 2678 2658
fordblks 7e980 7e9a0
show_variable: Variable=Variable1...