-
Notifications
You must be signed in to change notification settings - Fork 150
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Multi GCS: initial approach for multi_gcs.md
- Loading branch information
1 parent
a788b9a
commit 6a77d8e
Showing
1 changed file
with
128 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,128 @@ | ||
| # Multi GCS protocol | ||
| ## Introduction | ||
| A controlled vehicle should only accept MAVLink commands (or command-like messages) that are sent by the controlling GCS, or from other components with the same system id. Commands from other system should be rejected with MAV_RESULT_PERMISSION_DENIED (except for this command, which may be acknowledged with MAV_RESULT_ACCEPTED if control is granted). | ||
|
|
||
| The command is sent by a GCS to the autopilot component to request or release control of a system, specifying whether subsequent takeover requests from another GCS are automatically granted, or require permission. | ||
| The autopilot should grant control to the GCS if the system does not require takeover permission (or is uncontrolled) and ACK the request with MAV_RESULT_ACCEPTED. | ||
|
|
||
| The autopilot should stream CONTROL_STATUS indicating its controlling system: all other components with the same system id should monitor this message and set their own owner to match that of the autopilot. | ||
| If the autopilot cannot grant control (because takeover requires permission), the request should be rejected with MAV_RESULT_PERMISSION_DENIED. | ||
|
|
||
| The autopilot should then send this same command to the current owning GCS in order to notify of the request. | ||
| The owning GCS would ACK with MAV_RESULT_ACCEPTED, and might choose to release ownership of the vehicle, or re-request ownership with the takeover bit set to allow permission. | ||
|
|
||
| Note that the pilots of both GCS should co-ordinate safe handover offline. | ||
| It is also possible for a GCS to request control of a specific component rather than the whole system (though this is not recommended). | ||
| In this case the command should be sent to the specific component, which should also emit CONTROL_STATUS to indicate its owner (this component would ignore the CONTROL_STATUS set by the autopilot). | ||
| The flow is otherwise the same. | ||
|
|
||
| ### Multi GCS protocol messages | ||
|
|
||
| This is the set of messages and commands used on this protocol. | ||
|
|
||
| | Message | Description | | ||
| | ------------------------------------------------------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | ||
| | <a id="CONTROL_STATUS"></a>[CONTROL_STATUS](../messages/development.md#CONTROL_STATUS) | Information about GCS in control of this MAV. This should be broadcast at low rate (nominally 1 Hz) and emitted when ownership or takeover status change. Control over MAV is requested using MAV_CMD_REQUEST_OPERATOR_CONTROL. | | ||
|
|
||
| | Command | Description | | ||
| | ------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | ||
| | <a id="MAV_CMD_REQUEST_OPERATOR_CONTROL"></a>[MAV_CMD_REQUEST_OPERATOR_CONTROL](../messages/development.md#MAV_CMD_REQUEST_OPERATOR_CONTROL) | Request control of a system. | ||
|
|
||
| ### Workflow diagrams | ||
| Diagram 1 - 2 GCS, one of them asks for control without enforcing being asked before other GCS takes over (MAV_CMD_REQUEST_OPERATOR_CONTROL param 3 = 1) | ||
|
|
||
| <!-- Mermaid graph: | ||
| sequenceDiagram; | ||
| participant GCS - 253 | ||
| participant Vehicle - 1 | ||
| participant GCS - 250 | ||
| note over Vehicle - 1: Broadcast CONTROL_STATUS: Nobody in control <br> - Sysid In control: 0 | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 0 | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 0 | ||
| Note over GCS - 253: GCS 253 wants to request control <br> not enforcing asking for takeover | ||
| GCS - 253->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 1 (allow automatic takeover) | ||
| Vehicle - 1->>GCS - 253: COMMAND_ACK | ||
| Note over Vehicle - 1: Control is transfered to GCS 253 | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 253 <br> - takeover_allowed: 1 (takeover allowed automatically) | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 253 <br> - takeover_allowed: 1 (takeover allowed automatically) | ||
| Note over GCS - 253: It is now in control of vehicle 1 | ||
| Note over GCS - 250: Now GCS 250 wants to request control. <br> As GCS 253 didn't enforce being asked, <br> it will be granted automatically. | ||
| GCS - 250->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 1 (allow automatic takeover, although irrelevant right now) | ||
| Vehicle - 1->>GCS - 250: COMMAND_ACK | ||
| Note over Vehicle - 1: As asking for takeover wasn't enforced by GCS 253, <br> control is granted automatically. | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 250 <br> - takeover_allowed: 1 (takeover allowed automatically) | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 250 <br> - takeover_allowed: 1 (takeover allowed automatically) | ||
| --> | ||
|
|
||
| [](https://mermaid-js.github.io/mermaid-live-editor/edit#pako:eNrdVV9v2jAQ_yqnvKxItAqt9pJNSBmgqdqAjdA-IUUmvoDVxGaOA0JVv_vO4KSQlbWT2B7GC87Zd_n9uXMevURx9AKvwB8lygT7gi00yz_MJNBvxbQRiVgxaeBzL4JLuH5_8-vWPS5FkiFtd07n-fstqQyCWqM-zArgk1aMJ6ww0BuPppPx1ziahtO7KICRmiu-BSEhUdJolcHHue5SVrQtBIfbOh6Ae8VB4ctut8YdNEpXdQpbJxYyflsd_w_qwL7QqOZ8AMYuaQEbEqkAo0BbC0iAI5okF6BMlU6EXAArHuwfPYJhD2hL7t9Q1yWgR7oOw_u4N-zHk8H3u0E0jcffBpNwOp7EjkNQoSfLWG4zfLjYK-vw2BdWkCwaiciRtyFhEuYItC4TgxxSrXIoUHLUreOi1wF04KJBr3HmZneGZZnaACuNyhk1UE2y9aqxw2E46sdh70tT8SM1eo6HIME1k0WKmpCT9s6MM_lubXWbFYN4Rw35jmYVBBd8ZkyBbetMXXwWFC-27q2xCkqy6mAqVQprB7lzKte347xxavsnW_9qjzss6iHhgst31SQg9Z2bBtuIu7PCwEZkme1Iur-kadK5Op4T__-ckzZ5aZaqXCxBaI0Zru0NrMViaaxdrVf7-21jRMa8cBORncWBSRzm28o_Z1LyPH6_M-kMne__rfnz_xkKr-3lqHMmOH2eHy2mmWeWmOPMC2jJMWVlZmbeTD7RUZsbbWXiBUaX2Pa0bQIvSFlW0FO54sxU3_ZGdMCFUdoFn34CXbSSUw) | ||
|
|
||
| Diagram 2 - Now one of them asks for control enforcing being asked before other GCS takes over. When the other GCS takes over, the original GCS in control just requests again control without enforcing being asked before. This situation is interesting so the vehicle is never with no GCS in control. An alternative approach is in diagram 3. | ||
|
|
||
| <!-- mermaid graph: | ||
| sequenceDiagram; | ||
| participant GCS - 253 | ||
| participant Vehicle - 1 | ||
| participant GCS - 250 | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 0 | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 0 | ||
| Note over GCS - 253: GCS 253 wants to request control <br> ENFORCING asking for takeover first | ||
| GCS - 253->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 0 (Do not allow automatic takeover, ask first) | ||
| Vehicle - 1->>GCS - 253: COMMAND_ACK | ||
| Note over Vehicle - 1: Control is transfered to GCS 253 | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 253 <br> - takeover_allowed: 0 (automatic takeover not allowed, ask first) | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 253 <br> - takeover_allowed: 0 (automatic takeover not allowed, ask first) | ||
| Note over GCS - 253: It is now in control of vehicle 1 | ||
| Note over GCS - 250: Now GCS 250 wants to request control | ||
| GCS - 250->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 1 (allow automatic takeover, although irrelevant at this point) | ||
| Vehicle - 1->>GCS - 250: COMMAND_ACK | ||
| Vehicle - 1->>GCS - 253: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 250 (Sysid requesting control) <br> - param 2: 1 (request control) <br> - param 3: 1 (allow automatic takeover, although irrelevant at this point) | ||
| Note over GCS - 253: Popup appears in GCS comunicating the request from GCS 250. <br>User accepts. Requesting control again without enforcint being asked for takeover | ||
| GCS - 253->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 1 (allow automatic takeover) | ||
| Vehicle - 1->>GCS - 253: COMMAND_ACK | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 253 <br> - takeover_allowed: 1 (automatic takeover allowed) | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 253 <br> - takeover_allowed: 1 (automatic takeover allowed) | ||
| Note over GCS - 250: As vehicle is reporting now automatic takeover <br> is allowed, we are free to request control | ||
| GCS - 250->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 0 (do not allow automatic takeover, although irrelevant at this point) | ||
| Vehicle - 1->>GCS - 250: COMMAND_ACK | ||
| Note over Vehicle - 1: Control will be granted automatically now | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 250 <br> - takeover_allowed: 1 (allow automatic takeover) | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 250 <br> - takeover_allowed: 1 (allow automatic takeover) | ||
| --> | ||
|
|
||
| [](https://mermaid-js.github.io/mermaid-live-editor/edit#pako:eNrdV9FO2zAU_ZWrPIFUUAraSzYhVW2H0NaWtYWnSpFxblqLxM5shwoh_n3XSZqVkpZ1YqDRJze2r8-55-TIefC4itALPIM_c5Qce4LNNUs_zyTQL2PaCi4yJi2cdydwBCefTp9PXeNC8ARpur19n19Ora09OjuriwbQHQ2n49H3cDLtTK8m8OVGn9GUuTciCoUMuZJWqySAnXX8PepAWWioLIK6Qw1rYNyQBrAkBgasAu36YyxU28uy_eHX0bh7MTwHZm6FnEOsNFh2i0W5WGhjyzPqygR1DXgAg8512B30wnH_x1V_Mg1Hl_1xZzoahxWLYIWfOspSt8OHg4njskLkjl2BksqCRIwwagFnEm4QaJxzixHEWqVgUEaoD58WPQmgDQcbBDfWnBYH91RxBEsStQSWW5Uykrlm3HJtKGkfvij2YNAZ9sJO99umCk_6062YCRJBM2li1MSF9KgEeiUvOKmryRWZsGCJUUH8OdffjXDN3oP3-wBqNPmFdX2VpKWQtYdUDHcV-va2vdTZIe0qNfC3viRPve__x96nNTtMn9iFyucLEFpjgncu9JgFu6DmZkrI3abwG16GrfbZv2VOn61Ne8dmNBryUmV5BizLkGnjTOnmuEpzKTgrgNsF1i4rVK08eFygvDJUj3GOmTXHMH5uEjZnVHUpHEYLKCmvOWEis7hV9NI4s6xl-MdJ7x2i7Z3V_zZu243pVk2_Sb7-CYLGUOyYOjvJ7hozpQuFZWPfSwC0sE7tJQLTSGIjNt054OMEKh0cvXiZePVcfeGSsRRJ4mjSBVg6ljUownjvRHw18_m7zfc3L6r_Bud7LS9FnTIR0RfDg0Mz8yiRU5x5AQ0jjFme2Jk3k4-01BWY3EvuBVbn2PK0E9MLYpYY-pdnEbOrz42Np_1IWKWrh4-_AIxLByI) | ||
|
|
||
| Diagram 3 - Now one of them asks for control enforcing being asked before other GCS takes over. When the other GCS takes over, the original GCS in control just releases control. This might be desirable in some situations, but leaves the vehicle with no owner until the second GCS requests control: | ||
|
|
||
| <!-- mermaid graph: | ||
| sequenceDiagram; | ||
| participant GCS - 253 | ||
| participant Vehicle - 1 | ||
| participant GCS - 250 | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 0 | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 0 | ||
| Note over GCS - 253: GCS 253 wants to request control <br> ENFORCING asking for takeover first | ||
| GCS - 253->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 0 (Do not allow automatic takeover, ask first) | ||
| Vehicle - 1->>GCS - 253: COMMAND_ACK | ||
| Note over Vehicle - 1: Control is transfered to GCS 253 | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 253 <br> - takeover_allowed: 0 (automatic takeover not allowed, ask first) | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 253 <br> - takeover_allowed: 0 (automatic takeover not allowed, ask first) | ||
| Note over GCS - 253: It is now in control of vehicle 1 | ||
| Note over GCS - 250: Now GCS 250 wants to request control | ||
| GCS - 250->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 1 (allow automatic takeover, although irrelevant at this point) | ||
| Vehicle - 1->>GCS - 250: COMMAND_ACK | ||
| Vehicle - 1->>GCS - 253: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 250 (Sysid requesting control) <br> - param 2: 1 (request control) <br> - param 3: 1 (allow automatic takeover, although irrelevant at this point) | ||
| Note over GCS - 253: Popup appears in GCS comunicating the request from GCS 250. <br>User accepts. Releasing control | ||
| GCS - 253->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 0 (release control) <br> - param 3: 1 (allow automatic takeover, although it doesn't apply as we drop control) | ||
| Vehicle - 1->>GCS - 253: COMMAND_ACK | ||
| Note over Vehicle - 1: Nobody in control now | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 0 <br> - takeover_allowed: 1 (automatic takeover allowed) | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 0 <br> - takeover_allowed: 1 (automatic takeover allowed) | ||
| Note over GCS - 250: As vehicle is reporting now nobody in control <br> We are free to request control | ||
| GCS - 250->>Vehicle - 1: MAV_CMD_REQUEST_OPERATOR_CONTROL: <br> - param 1: 0 (Sysid requesting control not needed, can be deducted from sender) <br> - param 2: 1 (request control) <br> - param 3: 0 (do not allow automatic takeover, although irrelevant at this point) | ||
| Vehicle - 1->>GCS - 250: COMMAND_ACK | ||
| Note over Vehicle - 1: Control will be granted automatically now, as <br> nobody is in control | ||
| Vehicle - 1->>GCS - 253: CONTROL_STATUS <br> - sysid_in_control: 250 <br> - takeover_allowed: 1 (allow automatic takeover) | ||
| Vehicle - 1->>GCS - 250: CONTROL_STATUS <br> - sysid_in_control: 250 <br> - takeover_allowed: 1 (allow automatic takeover) | ||
| --> | ||
|
|
||
| [](https://mermaid-js.github.io/mermaid-live-editor/edit#pako:eNrdV1FP2zAQ_iunvAykglLQXrIJqWo7hLamrC3spVJkkgu1SOzMdqgqxH_fOUmzUhoqRiTE-uTG9t333Xf-4jw4oYzQ8RyNv3MUIQ44u1Us_TIXQL-MKcNDnjFh4Lw_hSM4-Xz6fOoaFzxMkKa7zfvccmpj7dHZWR3Ug_7Yn03GP4LprDe7msLXG3VGU3qleRRwEYRSGCUTD16M474iDpSBfGkQ5D0q2ABjhzSAJTHQYCQoWx9toNpehh3638aT_oV_DkzfcXELsVRg2B0W4WKutClz1JEJ6gZwD0a966A_GgST4c-r4XQWjC-Hk95sPAkqFt4aP1WUpXaHCwdTy2WNyKZdgxLSgECMMOpAyATcINA4Dw1GECuZgkYRoTp8GvTEgy4cbBHcWnNaJB7IIgVLErkElhuZMpK5ZtyxZShpH-4VezTq-YOg1_--rcKT-vQrZpxEUEzoGBVxIT0qgVrqBSt1NbkmExQsMSqIP-f6txC22K_g_T6Adjb5hbF1FaQlF3UPyRjuK_Tdpr1UWZ92lRq4jYfkae-7H7j3ac0LTZ-YhcxvF8CVwgTvrekxA2ZBxc0kFy83hbvjMDS2z-tLZvVpLNo7FmNnQ17KLM-AZRkypW1T2rlQprngISuAmwXWXVaoWvXgcYHySlM8FoaYGX0ME8rP9Abdj-HFrpXAIsc3S2AgkqjFJ2NrmqzIFWBJMJTM6tAt-bQvb2S02vQRspXWXtSNTtjd6YTVdFte_Mb8O-2zp2uXpYOhMJOq6B5rxuJZLYv8vxCYQuodxF0XEvh_3JYSR3tvGq2b7p4byJIniaVJt2NhWdagCOPK6mZfuiWVtYB6Q8PW7gV7urGhYIetXZT-Mb_TcVJUKeMRfWw8WDRzh8w8xbnj0TDCmOWJmTtz8UhLbYDpSoSOZ1SOHUdZqR0vZommf3kWMbP-Utl6Ooy4kap6-PgHUpIZrw) |