This repository contains Dockerfiles and associated assets for building FreeIPA server container images from the official yum/dnf repositories.
There are multiple Dockerfiles available for images based on various
operating systems. Use -f option to podman build or docker build
to pick a specific operating system. For example, running
podman build -t freeipa-server -f Dockerfile.centos-8-stream .
will build image based on CentOS 8 Stream packages using podman, and with
docker build -t freeipa-server -f Dockerfile.fedora-rawhide .
FreeIPA image based on Fedora rawhide will be built with docker. Note that when using docker / moby-engine, the docker daemon needs to be running.
The FreeIPA container runs systemd to manage all the necessary services within a single container. Running a systemd-based container may require special handling or parameters to be passed to the container runtime.
With podman, normal podman run is typically enough.
With docker on systems with cgroups v2, it may be necessary to use user namespace remapping for the container cgroup to be properly created and mounted within the container read-write as systemd expects it, with
{ "userns-remap": "default" }
in /etc/docker/daemon.json. Restart of the docker service is needed
after this edit. This approach also isolates the root in the container
from the root on the host, which is a good thing in general.
With docker on systems with cgroups v1, it may be necessary to
invoke docker run with option -v /sys/fs/cgroup:/sys/fs/cgroup:ro.
On SELinux enabled systems, it may be also necessary to enable running
systemd in containers by setting SELinux boolean container_manage_cgroup
on the host with
setsebool -P container_manage_cgroup 1
The FreeIPA container will store all its configurations and data on
volume mounted to /data directory in the container. If we create
directory which will hold the server data on the host with
mkdir /var/lib/ipa-data
we can then create the FreeIPA container with podman using
podman run --name freeipa-server-container -ti \
-h ipa.example.test --read-only \
-v /var/lib/ipa-data:/data:Z freeipa-server [ opts ]
and with docker using
docker run --name freeipa-server-container -ti \
-h ipa.example.test --read-only \
-v /var/lib/ipa-data:/data:Z freeipa-server [ opts ]
In case cgroup v1 is used on the host, -v /sys/fs/cgroup:/sys/fs/cgroup:ro
option may be necessary in the docker run case.
If you receive error like
IPv6 stack is enabled in the kernel but there is no interface that
has ::1 address assigned. Add ::1 address resolution to 'lo' interface.
You might need to enable IPv6 on the interface 'lo' in sysctl.conf.
you might also need to add option
--sysctl net.ipv6.conf.all.disable_ipv6=0
When running DNS server (the --setup-dns argument to
ipa-server-install) in a container with read-only root filesystem
(the --read-only option to podman run or docker run), the setup
code in the container won't be able to edit /etc/resolv.conf in the
container to point it to itself. Add --dns=127.0.0.1 option to the
podman run or docker run invocation to allow the FreeIPA server
to reach its own DNS server.
To allow for unprivileged container operation, use the -h ...
option to set the hostname for the FreeIPA server in the container.
If it's not possible to set the hostname for the container, specify it
with IPA_SERVER_HOSTNAME environment variable, for example with
podman run -e IPA_SERVER_HOSTNAME=.... This might however not work
with read-only containers.
Do not use the ipa-server-install --hostname ... argument.
Upon the first invocation with empty directory mounted to /data,
the container will run either ipa-server-install or ipa-replica-install
to configure FreeIPA master or replica. For example
podman run -ti -h ipa.example.test --read-only \
-v /var/lib/ipa-data:/data:Z \
freeipa-server ipa-server-install -r EXAMPLE.TEST --no-ntp
will run interactive ipa-server-install and configure the FreeIPA master
using the inputs provided. For unattended initial installation, use
the -U argument to ipa-server-install and specify all the necessary
inputs as argument on the command line, for example
docker run -ti -h ipa.example.test --read-only \
-v /var/lib/ipa-data:/data:Z \
-e PASSWORD=Secret123 \
freeipa-server ipa-server-install -U -r EXAMPLE.TEST --no-ntp
The ipa-server-install command is the default and can be omitted.
Sometimes it is not convenient or possible to specify the arguments
to ipa-server-install as arguments to podman run or docker run.
In the case they can be specified either using environment variable
IPA_SERVER_INSTALL_OPTS using the -e option, or they can be passed
in using file ipa-server-install-options in the directory mounted
to the container as /data. For example, when
/var/lib/ipa-data/ipa-server-install-options contains
--realm=EXAMPLE.TEST
--ds-password=The-directory-server-password
--admin-password=The-admin-password
and podman run or docker run is executed with
-v /var/lib/ipa-data:/data:Z, the content of
ipa-server-install-options will be passed as arguments to
ipa-server-install.
Since the ipa-server-install-options typically contains passwords,
it is also possible to use podman secret create to store the whole
content of that file, and the invoke podman run with options like
--secret source=options-with-credentials,target=/data/ipa-server-install-options
to expose the options in the container. The same holds for docker
invocation.
If you want to instruct the container to create a replica, specify the
ipa-replica-install command in the podman run or docker run
parameters:
podman run -ti -h ipa.example.test --read-only \
-v /var/lib/ipa-data:/data:Z \
freeipa-server ipa-replica-install [ opts ]
Using ipa-replica-install-options also works and will invoke
ipa-replica-install and pass it its content as argument, the same
way ipa-server-install-options works for ipa-server-install.
Upon subsequent invocations when /data is found already populated
with FreeIPA server configuration and data, the options are ignored
and just the necessary services started in the container.
If you want to use the FreeIPA server not just from the host
where it is running but from external machines as well, you
might want to use the -p options to make the services accessible
externally.
docker run -p 53:53/udp -p 53:53 \
-p 80:80 -p 443:443 -p 389:389 -p 636:636 -p 88:88 -p 464:464 \
-p 88:88/udp -p 464:464/udp -p 123:123/udp ...
You will then likely want to also specify the --ip-address
option to ipa-server-install with the IP address of the host,
and also use the --add-host option to the docker run / podman run
with the same IP address, especially when running the container
as read only.
Alternatively, the IPA_SERVER_IP environment variable via the
-e option to docker run / podman run can be used to
define what IP address should the FreeIPA server put to DNS as its
address. Using this mechanism will however not update the ipa-ca
record.
If you have existing container with data volume, it should be safe
to shut it down and run new one based on newer image, with the same
data directory bind-mounted to /data. The container logic will detect
that it is running with data produced by different image and attempt
to upgrade the configuration and data. Of course, keeping backup
of the data directory for cases when the upgrade process fails
is recommended.
Speaking of backups: the FreeIPA server container stores all
configuration, data, and logs in one volume mounted at /data.
So instead of using ipa-backup and ipa-restore, the easiest way
to backup the container is to stop it and just copy the content of
the directory mounted to /data.
If you transfer that backup to different machine and you've been
using setup with user namespace remapping (rootless containers),
check that the /etc/subuid and /etc/subgid values used by the
docker/podman match on both machines.
You then restore the server by running a new container with a copy
of that backup mounted to /data.
There are multiple *-client branches named after OS they are
based on. Check out the branch you prefer and in the root of the
repository, run:
docker build -t freeipa-client .
To run the client container, run it with correctly set DNS and hostname in the IPA domain, or you can link it to the freeipa-server container directly:
docker run --privileged --link freeipa-server-container:ipa \
-e PASSWORD=Secret123 -ti freeipa-client
The first time this container runs, it invokes ipa-client-install
with the given admin password.
The container scripts provide some options for debugging:
-
Enable shell script tracing in both the top-level
init-datascript and theipa-server-configure-firstscript by setting the$DEBUG_TRACEenvironment variable. -
Disable container exit after script failure by setting the
$DEBUG_NO_EXITenvironment variable. After failure, the container will continue running, and can be entered for debugging with e.g.podman exec -it freeipa-server-container bash. This can also be achieved by specifyingno-exitas the first word in the [opts] to the container. -
Force container exit after successfully configuring the FreeIPA server by specifying
exit-on-finishedas the first word in the [opts] to the container.
Example usage:
podman run [...] -e DEBUG_TRACE=1 -e DEBUG_NO_EXIT=1 freeipa-server
or
docker run [...] freeipa-server exit-on-finished -U -r EXAMPLE.TEST
You can also try to run
tests/run-partial-tests.sh Dockerfile
or
docker=podman tests/run-partial-tests.sh Dockerfile
which can uncover the general issues with running systemd in containers.
To check the general health of the project, see https://github.com/freeipa/freeipa-container/actions where tests are run for various OS versions in the containers.
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.