MicroSD-Card adapter for Blaze cartridges.
To order the latest version either use KiCad or use release zip from GitHub. To generate the Gerber files yourself, open microcade.kicad_pcb in KiCad. Use Fabrication Output > Gerber and select an output folder and agree with Plot with the default configruation. Also use Fabrication Output > Drill Files than select the same output folder and agree with Generate Drill File.
The ordering and manufacturing depends on your selected PCB manufacturer. PCB-Thickness is improtant! For PCBWay:
- enter length/width (57.9 x 43.6 mm)
- 2 layers
- 1mm thickness
- FR4
- TG 150-160
- 6/6mil Min Tracking
- 0.3mm Hole Size
- Solder Mask - any is fine
- Silkscreen - any is fine
- No Edge Connector
- Finish - any is fine but would suggest HASL
- Tending Vias
- 1oz Finish Copper
Upload a zip containing the above generated files. Currently the price for 5 boards should be 5$.
To finish the board one GB/GB Color/GB Advance are required. Could be found at Aliexpress for example: Aliexpress