Skip to content

Commit

Permalink
ICMP6 Router Advertisement feature
Browse files Browse the repository at this point in the history 
This commit adds "Router Advertisement" feature which emits periodic
Neighbor Discovery ICMPv6 Router Advertisement (RA) messages
announcing routes on other network interfaces related to Thread
network.

The routes included in RA message mirror all the routes added on the
host primary interface (from `IPv6:Routes`) corresponding to off-mesh
routes and/or on-mesh prefixes within the Thread network.

This feature can be enabled through property `RouterAdvert:Enable` (by
default it is disabled) and its behavior can modified through a group
of wpan properties (all start with prefix `RouterAdver`).

A readme/guide is also added under doc folder which describes the wpan
properties and shows example use/behavior of this feature.
  • Loading branch information
@abtink
abtink committed Oct 11, 2019
1 parent 32b29ce commit 609a1d5
Show file tree
Hide file tree
Showing 13 changed files with 697 additions and 2 deletions.
1 change: 1 addition & 0 deletions Android.mk
View file
Original file line number Diff line number Diff line change
Expand Up @@ -89,6 +89,7 @@ LOCAL_SRC_FILES := \
src/wpantund/NCPInstance.cpp \
src/wpantund/NCPInstanceBase.cpp \
src/wpantund/FirmwareUpgrade.cpp \
src/wpantund/ICMP6RouterAdvertiser.cpp \
src/wpantund/StatCollector.cpp \
src/wpantund/RunawayResetBackoffManager.cpp \
src/wpantund/NCPInstanceBase-NetInterface.cpp \
Expand Down
170 changes: 170 additions & 0 deletions doc/router-advert-feature-guide.md
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,170 @@
# `wpantund` ICMPv6 Router Advertisement Feature #

The `"Router Advertisement"` feature enables `wpantund` to emit periodic Neighbor Discovery ICMPv6 Router Advertisement (RA) messages announcing routes on other network interfaces related to Thread network routes.

The routes included in RA message mirror all the routes added on the host primary interface corresponding to the Thread network:
- Host routes associated with off-mesh routes within the Thread network (when `Daemon:OffMeshRoute:AutoAddOnInterface` feature is enabled).
- Host routes associated with on-mesh prefixes within the Thread network (when `Daemon:OnMeshPrefix:AutoAddAsInterfaceRoute` feature is enabled).
- The list of interface routes is available form wpan property `IPv6:Routes`.

The wpantund RA feature can be enabled through property `RouterAdvert:Enable` (by default it is disabled) and its behavior can modified through a group of wpan properties (all starting with `RouterAdver:` prefix).

- `RouterAdvert:Enable` can be used to enable or disable the whole feature (default is false, i.e., disabled)
- `RouterAdvert:Netifs` defines the list of netif names to send RA messages on. This is a list-based property (we can set the entire list using space separated interface names, or use `add` or `remove` commands to update the list item by item). On start the list is empty.
- `RouterAdvert:TxPeriod` the tx period of RA messages in unit of seconds. Minimum period is 4 seconds, max period is 1800 seconds. The period is set to min or max if the value being set is out of the supported range. On start it is set to 10 seconds.
- `RouterAdvert:DefaultRoute:Lifetime` specifies the lifetime value in RA header (non-zero indicates that we are a default route). By default it is set to zero (i.e. not a default route).
- `RouterAdvert:DefaultRoute:Preference` specifies the default route preference. Positive value indicates high, zero indicates medium, and negative indicates low preference. Default value is zero (medium).

# Example of behavior

We enable the feature:

wpanctl:wpan1> set RouterAdvert:Enable true

Add the netif names we want ICMPv6 RA messages to be sent on (this is a list):

wpanctl:wpan1> add RouterAdvert:Netifs wpan1
wpanctl:wpan1> get RouterAdvert:Netifs
RouterAdvert:Netifs = [
"wpan1"
]

When a route is added on host, the same route is announced through the RA message:

wpanctl:wpan1> add-prefix fd00:1234:: -l 64 -o -c
Successfully added prefix "fd00:1234::" len:64 stable:0 [on-mesh:1 def-route:0 config:1 dhcp:0 slaac:0 pref:0 prio:med]
wpanctl:wpan1>
wpanctl:wpan1>

wpanctl:wpan1> get IPv6:Routes
IPv6:Routes = [
"fd00:1234::/64 metric:256 "
]

Output of `tcpdump` on the interface shows the RA message:

sudo tcpdump -n -i wpan1 icmp6 -vv -X

11:01:58.991522 IP6 (flowlabel 0xba663, hlim 1, next-header ICMPv6 (58) payload length: 40) fe80::4801:7e22:7895:a656 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 40
hop limit 255, Flags [none], pref medium, router lifetime 0s, reachable time 3600s, retrans time 0s
source link-address option (1), length 8 (1): 00:00:00:00:00:00
0x0000: 0000 0000 0000
route info option (24), length 16 (2): fd00:1234::/64, pref=medium, lifetime=3600s
0x0000: 4000 0000 0e10 fd00 1234 0000 0000
0x0000: 600b a663 0028 3a01 fe80 0000 0000 0000 `..c.(:.........
0x0010: 4801 7e22 7895 a656 ff02 0000 0000 0000 H.~"x..V........
0x0020: 0000 0000 0000 0001 8600 13af ff00 0000 ................
0x0030: 0000 0e10 0000 0000 0101 0000 0000 0000 ................
0x0040: 1802 4000 0000 0e10 fd00 1234 0000 0000 [email protected]....

We can add or remove interface names to `RouterAdvert:Netifs` property. The RA messages are sent over all given interfaces:

wpanctl:wpan1> add RouterAdvert:Netifs eno1

wpanctl:wpan1>
wpanctl:wpan1> get RouterAdvert:Netifs
RouterAdvert:Netifs = [
"eno1"
"wpan1"
]

sudo tcpdump -n -i eno1 icmp6 -vv -X

11:22:23.785865 IP6 (flowlabel 0xbcd66, hlim 1, next-header ICMPv6 (58) payload length: 40) fe80::6d87:d70b:c949:762a > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 40
hop limit 255, Flags [none], pref medium, router lifetime 0s, reachable time 3600s, retrans time 0s
source link-address option (1), length 8 (1): ec:b1:d7:2f:7c:b9
0x0000: ecb1 d72f 7cb9
route info option (24), length 16 (2): fd00:1234::/64, pref=medium, lifetime=3600s
0x0000: 4000 0000 0e10 fd00 1234 0000 0000
0x0000: 600b cd66 0028 3a01 fe80 0000 0000 0000 `..f.(:.........
0x0010: 6d87 d70b c949 762a ff02 0000 0000 0000 m....Iv*........
0x0020: 0000 0000 0000 0001 8600 341c ff00 0000 ..........4.....
0x0030: 0000 0e10 0000 0000 0101 ecb1 d72f 7cb9 ............./|.
0x0040: 1802 4000 0000 0e10 fd00 1234 0000 0000 [email protected]....

The `wpantund` logs indicate when a RA message is sent over an interface:

wpantund[69029]: Sent ICMP6 RouterAdvert on "eno1" (1 route info options)
wpantund[69029]: Sent ICMP6 RouterAdvert on "wpan1" (1 route info options)

The entire list of interfaces can be set in one command (via space separated list of names).

wpanctl:wpan1> set RouterAdvert:Netifs "wpan1 eno1"

wpanctl:wpan1> get RouterAdvert:Netifs
RouterAdvert:Netifs = [
"eno1"
"wpan1"
]

RA messages are sent every `RouterAdvert:TxPeriod` seconds or when a route is added/removed (some state changes)

wpanctl:wpan1> set RouterAdvert:TxPeriod 4

When a route is added/removed (state changes), a new RA is sent immediately.

wpanctl:wpan1> add-prefix fd00:baba:cafe:: -l 48 -o -c
Successfully added prefix "fd00:baba:cafe::" len:48 stable:0 [on-mesh:1 def-route:0 config:1 dhcp:0 slaac:0 pref:0 prio:med]

wpanctl:wpan1> get IPv6:Routes
IPv6:Routes = [
"fd00:baba:cafe::/48 metric:256 "
"fd00:1234::/64 metric:256 "
]

`tcpdump` output now contains two route info options and is sent every 4 seconds:

11:07:04.441659 IP6 (flowlabel 0xba663, hlim 1, next-header ICMPv6 (58) payload length: 56) fe80::4801:7e22:7895:a656 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 56
hop limit 255, Flags [none], pref medium, router lifetime 0s, reachable time 3600s, retrans time 0s
source link-address option (1), length 8 (1): 00:00:00:00:00:00
0x0000: 0000 0000 0000
route info option (24), length 16 (2): fd00:baba:cafe::/48, pref=medium, lifetime=3600s
0x0000: 3000 0000 0e10 fd00 baba cafe 0000
route info option (24), length 16 (2): fd00:1234::/64, pref=medium, lifetime=3600s
0x0000: 4000 0000 0e10 fd00 1234 0000 0000
0x0000: 600b a663 0038 3a01 fe80 0000 0000 0000 `..c.8:.........
0x0010: 4801 7e22 7895 a656 ff02 0000 0000 0000 H.~"x..V........
0x0020: 0000 0000 0000 0001 8600 3ad2 ff00 0000 ..........:.....
0x0030: 0000 0e10 0000 0000 0101 0000 0000 0000 ................
0x0040: 1802 3000 0000 0e10 fd00 baba cafe 0000 ..0.............
0x0050: 1802 4000 0000 0e10 fd00 1234 0000 0000 [email protected]....

11:07:08.445622 IP6 (flowlabel 0xba663, hlim 1, next-header ICMPv6 (58) payload length: 56) fe80::4801:7e22:7895:a656 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 56
hop limit 255, Flags [none], pref medium, router lifetime 0s, reachable time 3600s, retrans time 0s
source link-address option (1), length 8 (1): 00:00:00:00:00:00
0x0000: 0000 0000 0000
route info option (24), length 16 (2): fd00:baba:cafe::/48, pref=medium, lifetime=3600s
0x0000: 3000 0000 0e10 fd00 baba cafe 0000
route info option (24), length 16 (2): fd00:1234::/64, pref=medium, lifetime=3600s
0x0000: 4000 0000 0e10 fd00 1234 0000 0000
0x0000: 600b a663 0038 3a01 fe80 0000 0000 0000 `..c.8:.........
0x0010: 4801 7e22 7895 a656 ff02 0000 0000 0000 H.~"x..V........
0x0020: 0000 0000 0000 0001 8600 3ad2 ff00 0000 ..........:.....
0x0030: 0000 0e10 0000 0000 0101 0000 0000 0000 ................
0x0040: 1802 3000 0000 0e10 fd00 baba cafe 0000 ..0.............
0x0050: 1802 4000 0000 0e10 fd00 1234 0000 0000 [email protected]....


The property `RouterAdvert:DefaultRoute:Lifetime` specifies the lifetime value in RA header (is a default route?):

wpanctl:wpan1> set RouterAdvert:DefaultRoute:Lifetime 1000

11:10:05.929627 IP6 (flowlabel 0xba663, hlim 1, next-header ICMPv6 (58) payload length: 56) fe80::4801:7e22:7895:a656 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 56
hop limit 255, Flags [none], pref medium, router lifetime 1000s, reachable time 3600s, retrans time 0s
source link-address option (1), length 8 (1): 00:00:00:00:00:00
0x0000: 0000 0000 0000

The property `RouterAdvert:DefaultRoute:Preference` determines default route preference. Positive value indicates high, zero indicates medium, and negative indicates low preference.

wpanctl:wpan1> set RouterAdvert:DefaultRoute:Preference 1

11:12:19.989599 IP6 (flowlabel 0xba663, hlim 1, next-header ICMPv6 (58) payload length: 56) fe80::4801:7e22:7895:a656 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 56
hop limit 255, Flags [none], pref high, router lifetime 1000s, reachable time 3600s, retrans time 0s

wpanctl:wpan1> set RouterAdvert:DefaultRoute:Preference -v -1

11:13:08.078489 IP6 (flowlabel 0xba663, hlim 1, next-header ICMPv6 (58) payload length: 56) fe80::4801:7e22:7895:a656 > ff02::1: [icmp6 sum ok] ICMP6, router advertisement, length 56
hop limit 255, Flags [none], pref low, router lifetime 1000s, reachable time 3600s, retrans time 0s

Limitations:
- The current implementation does not support replying to Router Solicitation messages.
6 changes: 6 additions & 0 deletions src/ncp-spinel/SpinelNCPInstance-Protothreads.cpp
View file
Original file line number Diff line number Diff line change
Expand Up @@ -560,12 +560,18 @@ SpinelNCPInstance::vprocess_init(int event, va_list args)
int
SpinelNCPInstance::vprocess_event(int event, va_list args)
{
va_list args_tmp;

if (get_ncp_state() == FAULT) {
// We perform no processing in the fault state.
PT_INIT(&mControlPT);
return 0;
}

va_copy(args_tmp, args);
NCPInstanceBase::vprocess_event(event, args_tmp);
va_end(args_tmp);

while (!mTaskQueue.empty()) {
va_list tmp;
boost::shared_ptr<SpinelNCPTask> current_task(mTaskQueue.front());
Expand Down
21 changes: 21 additions & 0 deletions src/util/netif-mgmt.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -532,3 +532,24 @@ netif_mgmt_leave_ipv6_multicast_address(int reqfd, const char* if_name, const ui
bail:
return ret;
}

int
netif_mgmt_get_hw_address(int fd, const char* if_name, uint8_t addr[6])
{
int ret = -1;

#ifdef SIOCGIFHWADDR
struct ifreq ifr;

memset(&ifr, 0, sizeof(struct ifreq));
strlcpy(ifr.ifr_name, if_name, sizeof(ifr.ifr_name));

ret = ioctl(fd, SIOCGIFHWADDR, &ifr);

if (ret >= 0) {
memcpy(addr, ifr.ifr_hwaddr.sa_data, 6);
}
#endif

return ret;
}
2 changes: 2 additions & 0 deletions src/util/netif-mgmt.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -55,6 +55,8 @@ extern int netif_mgmt_remove_ipv6_route(int fd, const char* if_name, const uint8
extern int netif_mgmt_join_ipv6_multicast_address(int reqfd, const char* if_name, const uint8_t addr[16]);
extern int netif_mgmt_leave_ipv6_multicast_address(int reqfd, const char* if_name, const uint8_t addr[16]);

extern int netif_mgmt_get_hw_address(int fd, const char* if_name, uint8_t hw_addr[6]);

#if defined(__cplusplus)
}
#endif
Expand Down
Loading

0 comments on commit 609a1d5

Please sign in to comment.