gomphs

Simple tool to ping multiple hosts at once with a CLI and web-based overview.

Download

[Binaries] (https://github.com/42wim/gomphs/releases)

Usage

Needs to be run as root (raw sockets for icmp)
When using hostnames with ipv4 and ipv6 addresses, preference goes to ipv4. (-expand option shows both)

# gomphs
Usage of ./gomphs:
  -expand=false: use all available ip's (ipv4/ipv6) of a hostname (multiple A, AAAA)
  -hosts="": ip addresses/hosts to ping, space seperated (e.g "8.8.8.8 8.8.4.4 google.com 2a00:1450:400c:c07::66")
  -nocolor=false: disable color output
  -port="8887": port the webserver listens on
  -showrtt=false: show roundtrip time in ms
  -web=false: enable webserver

no options

. host is up
! host is down

showrtt

Add -showrtt on commandline

When rtt > 1s it will just show ">1s"
When rtt < 0ms it will just show 0

After 25 pings the header will be repeated

expand

Add -expand on commandline

When using expand this also prints an extra (onetime) header so you know what ip addresses belong to what number. See examples.

webserver

Add -web on commandline

The web GUI is by default available via http://:8887/stream
Use -port to use another port.

When an IP address/host isn't reachable, this will drop to -10 on the Y-axis.

Examples

using web, expand and showrtt

# gomphs -hosts="facebook.com slashdot.org www.linkedin.com" -showrtt -expand -web

using expand

Facebook resolves into 2 addresses (ipv4/ipv6), see 5 and 6 in example.
When using expand this also prints an extra (onetime) header so you know what ip addresses belong to what number

Building

Make sure you have Go properly installed, including setting up your GOPATH

Next, clone this repository into $GOPATH/src/github.com/42wim/gomphs

$ mkdir -p $GOPATH/src/github.com/42wim
$ cd $GOPATH/src/github.com/42wim
$ git clone https://github.com/42wim/gomphs.git
$ cd gomphs
$ go get
$ go build