remove OSS/Cloud WireGuard note regarding natOutgoing (can't verify i…

…f it's true)
tigera · Dec 12, 2024 · bbdf2cb · bbdf2cb
1 parent 992d5e2
commit bbdf2cb
Show file tree

Hide file tree

Showing 8 changed files with 0 additions and 48 deletions.
diff --git a/calico-cloud/compliance/encrypt-cluster-pod-traffic.mdx b/calico-cloud/compliance/encrypt-cluster-pod-traffic.mdx
@@ -167,12 +167,6 @@ The above command can be used to change other WireGuard attributes. For a list o
 
 :::
 
-:::note
-
-`natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-
-:::
-
 We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
 
 ### Verify encryption is enabled

diff --git a/...co-cloud_versioned_docs/version-20-1/compliance/encrypt-cluster-pod-traffic.mdx b/...co-cloud_versioned_docs/version-20-1/compliance/encrypt-cluster-pod-traffic.mdx
@@ -167,12 +167,6 @@ The above command can be used to change other WireGuard attributes. For a list o
 
 :::
 
-:::note
-
-`natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-
-:::
-
 We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
 
 ### Verify encryption is enabled

diff --git a/...co-cloud_versioned_docs/version-20-2/compliance/encrypt-cluster-pod-traffic.mdx b/...co-cloud_versioned_docs/version-20-2/compliance/encrypt-cluster-pod-traffic.mdx
@@ -167,12 +167,6 @@ The above command can be used to change other WireGuard attributes. For a list o
 
 :::
 
-:::note
-
-`natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-
-:::
-
 We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
 
 ### Verify encryption is enabled

diff --git a/calico/network-policy/encrypt-cluster-pod-traffic.mdx b/calico/network-policy/encrypt-cluster-pod-traffic.mdx
@@ -208,12 +208,6 @@ The above command can be used to change other WireGuard attributes. For a list o
 
 :::
 
-:::note
-
-`natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-
-:::
-
 We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
 
 ### Disable WireGuard for an individual node

diff --git a/calico_versioned_docs/version-3.26/network-policy/encrypt-cluster-pod-traffic.mdx b/calico_versioned_docs/version-3.26/network-policy/encrypt-cluster-pod-traffic.mdx
@@ -208,12 +208,6 @@ The above command can be used to change other WireGuard attributes. For a list o
 
 :::
 
-:::note
-
-`natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-
-:::
-
 We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
 
 ### Disable WireGuard for an individual node

diff --git a/calico_versioned_docs/version-3.27/network-policy/encrypt-cluster-pod-traffic.mdx b/calico_versioned_docs/version-3.27/network-policy/encrypt-cluster-pod-traffic.mdx
@@ -208,12 +208,6 @@ The above command can be used to change other WireGuard attributes. For a list o
 
 :::
 
-:::note
-
-`natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-
-:::
-
 We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
 
 ### Disable WireGuard for an individual node

diff --git a/calico_versioned_docs/version-3.28/network-policy/encrypt-cluster-pod-traffic.mdx b/calico_versioned_docs/version-3.28/network-policy/encrypt-cluster-pod-traffic.mdx
@@ -208,12 +208,6 @@ The above command can be used to change other WireGuard attributes. For a list o
 
 :::
 
-:::note
-
-`natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-
-:::
-
 We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
 
 ### Disable WireGuard for an individual node

diff --git a/calico_versioned_docs/version-3.29/network-policy/encrypt-cluster-pod-traffic.mdx b/calico_versioned_docs/version-3.29/network-policy/encrypt-cluster-pod-traffic.mdx
@@ -208,12 +208,6 @@ The above command can be used to change other WireGuard attributes. For a list o
 
 :::
 
-:::note
-
-`natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-
-:::
-
 We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
 
 ### Disable WireGuard for an individual node
-Original file line number
+Diff line change
@@ Expand Up @@
     :::
-    :::note
-    `natOutgoing: true` is set for the default IPv4 IP pool, but not so for IPv6. Wireguard requires `natOutgoing` to be enabled in both IPv4 and IPv6, so [enable NAT outgoing for the IPv6 IP pools](../networking/configuring/workloads-outside-cluster.mdx) when using IPv6 Wireguard.
-    :::
     We recommend that you review and modify the MTU used by $[prodname] networking when WireGuard is enabled to increase network performance. Follow the instructions in the [Configure MTU to maximize network performance](../networking/configuring/mtu.mdx) guide to set the MTU to a value appropriate for your network.
     ### Verify encryption is enabled
@@ Expand Down @@